No description available.

The new generation of astronomical instruments are not only in need of the highest sensitivity but require also well-controlled and known instrumental systematic effects. This is particularly relevant for projects dedicated to the study of the Cosmic Microwave background (CMB). Following the success of the Planck mission in providing the most detailed picture of the CMB temperature anisotropy to date, the next generation of CMB projects such as COrE (a potential future mission) and QUBIC (a ground based instrument)will be aiming to study the polarisation anisotropy of the CMB. However, the expectedB mode signal from the CMB is several orders of magnitude weaker than the temperature counterpart. Hence the calibration procedures will have to be more stringent than the ones that have been adopted for Planck, to get a proper detection of the primordialB mode signal. For instance, measurements for the receiver and optical systematic effects must be taken into consideration to get a proper reconstruction of the B modepower spectrum. This thesis is focused on the impact of real individual receiver and optical componentson the observation of the primordial B modes. To achieve this, several receiver and quasioptical components have been measured and modelled for their instrumental systematic effects. An analysis pipeline has also been developed, to assess the impact of such instrumental systematic effects on the observation of the primordial B modes. Using the results from the measurements and the analysis pipeline, the instrumental systematic effects that are of concern to the observation of primordial B modes have been identified. This is assuming that no effort has been made to mitigate such instrumental systematic effects.

Industry 4.0 will pave the way to a new age of advanced manufacturing. Additive manufacturing (AM) is one of the leading sectors of the upcoming industrial revolution. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. AM can also customize the microstructure and mechanical properties of the components according to the selected technique and process parameters. AM of metals using selective laser melting (SLM) could significantly impact a variety of critical applications. SLM is the most common technique of processing high strength Aluminum alloys. SLM of these alloys promises to enhance the performance of lightweight critical components used in various aerospace and automotive applications such as metallic optics and optomechanical components. However, the surface and inside defects of the as-built parts present an obstacle to product quality requirements. Consequently, the post-processing of SLM produced Al alloy parts is an essential step for homogenizing their microstructure and reducing as-built defects. In the current research, various studies assess the optimal process mapping for high-quality SLM parts and the post-processing treatment of Al alloy parts. Ultra-precision machining with single point diamond turning or diamond micro fly-milling is also investigated for the as-built and post-processed Al parts to satisfy the optical mirror’s surface finish requirements. The influence of the SLM process parameters on the quality of the AlSi10Mg and Al6061 alloy parts is investigated. A design of experiment (DOE) is used to analyze relative density, porosity, surface roughness, dimensional accuracy, and mechanical properties according to the interaction effect between SLM process parameters. The microstructure of both materials was also characterized. A developed process map shows the range of energy densities and SLM process parameters for each material needed to achieve optimum quality of the as-built parts. This comprehensive study also strives to reduce the amount of post-processing needed. Thermal post-processing of AlSi10Mg parts is evaluated, using recycled powder, with the aim of improving the microstructure homogeneity of the as-built parts. This work is essential for the cost-effective additive manufacturing (AM) of metal optics and optomechanical systems. To achieve this goal, a full characterization of fresh and recycled powder was performed, in addition to a microstructure assessment of the as-built fabricated samples. Annealing, solution heat treatment (SHT) and T6 heat treatment (T6 HT) were applied under different processing conditions. The results demonstrated an improvement in microstructure homogeneity after thermal post-processing under specific conditions of SHT and T6 HT. A micro-hardness map was developed to help in the selection of optimal post-processing parameters for the part’s design requirements. A study is also presented, which aims to improve the surface characteristics of the as-built AlSi10Mg parts using shot peening (SP). Different SP intensities were applied to various surface textures of the as-built samples. The SP results showed a significant improvement in the as-built surface topography and a higher value of effective depth using 22.9A intensity and Gp165 glass beads. The area near the shot-peened surface showed a significant microstructure refinement up to a specific depth, due to the dynamic precipitation of nanoscale Si particles. Surface hardening and high compressive residual stresses were generated due to severe plastic deformation. Friction stir processing (FSP) was studied as a localized treatment on a large surface area of the as-built and hot isostatic pressed (HIPed) AlSi10Mg parts using multiple FSP tool passes. The influence of FSP on the microstructure, hardness, and residual stresses of parts was investigated. FSP transforms the microstructure of parts into an equiaxed grain structure. A consistent microstructure homogenization was achieved over the processed surface after applying a high ratio of tool pass overlap of ≥60%. A map of microstructure and hardness was prepared to assist in the selection of the optimal FSP parameters for attaining the required quality of the final processed parts. Micromachining to the mirror surface was performed using diamond micro fly-milling and single point diamond turning techniques, and the effect of the material properties on surface roughness after machining was investigated. The machining parameters were also tuned to meet IR mirror optical requirements. A novel mirror structure is developed using the design for additive manufacturing concept additive (DFAM). This design achieved weight reduction of 50% as compared to the typical mirror structure. Moreover, the developed design offers an improvement of the mirror cooling performance due to the embedded cooling channels directed to the mirror surface. A novel mirror structure is developed using the design for additive manufacturing concept additive (DFAM). This design achieved weight reduction of 50% as compared to the typical mirror structure. Moreover, the developed design offers an improvement of the mirror cooling performance due to the embedded cooling channels directed to the mirror surface. / Thesis / Doctor of Philosophy (PhD)

L'inscription laser directe est un domaine de recherche en croissance depuis ces deux dernières décennies, fournissant un moyen efficace et robuste pour inscrire directement des structures en trois dimensions (3D) dans des matériaux transparents tels que des verres en utilisant des impulsions laser femtosecondes. Cette technique présente de nombreux avantages par rapport à la technique de lithographie, qui se limite à la structuration en deux dimensions (2D) et implique de nombreuses étapes de fabrication. Cela rend la technique d’inscription laser direct bien adaptée aux nouveaux procédés de fabrication. Généralement, l’inscription laser dans les verres induit des changements physiques tels qu'un changement permanent de l'indice de réfraction localisé. Ces modifications ont été classés en trois types distincts : (Type I, Type II et Type III). Dans ce travail, nous présentons un nouveau type de changement d'indice de réfraction, appelé type A qui est basé sur la création d’agrégats d'argent photo-induit. En effet, dans des verres dans lesquels sont incorporés des ions argent Ag+, lors de leurs synthèses, l’inscription laser directe induit la création d’agrégats d’argent fluorescents Agmx+ au voisinage du voxel d’interaction. Ces agrégats modifient localement les propriétés optiques comme : la fluorescence, la non-linéarité et la réponse plasmonique du verre. Ainsi, différents guides d'ondes, un séparateur de faisceau 50-50, ainsi que des coupleurs optiques ont été inscrits en se basant sur ce nouveau Type A et complétement caractérisés. D'autre part, une étude comparative entre les deux types de guides d'ondes (type A et type I) est présentée, tout en montrant qu’en ajustant les paramètres laser, il est possible de déclencher soit le Type I soit le Type A. Enfin, en se basant sur des guides d’ondes de type A inscrits proche de la surface du verre, un capteur d'indice de réfraction hautement sensible a été inscrit dans une lame de verre de 1 cm de long. Ce capteur miniaturisé peut présenter deux fenêtres de détection d’indice, ce qui constitue une première mondiale. Les propriétés des guides d'ondes inscrits dans ces verres massifs ont été transposées à des fibres en forme de ruban, du même matériau contenant de l'argent. Les résultats obtenus dans ce travail de thèse ouvrent la voie à la fabrication de circuits intégrés en 3D et de capteurs à fibre basés sur des propriétés optiques originales inaccessibles avec des guides d’onde de Type I standard. / Direct Laser Writing (DLW) has been an exponentially growing research field during the last two decades, by providing an efficient and robust way to directly address three dimensional (3D) structures in transparent materials such as glasses using femtosecond laser pulses. It exhibits many advantages over lithography technique which is mostly limited to two dimensional (2D) structuring and involves many fabrication steps. This competitive aspect makes the DLW technique suitable for future technological transfer to advanced industrial manufacturing. Generally, DLW in glasses induces physical changes such as permanent local refractive index modifications that have been classified under three distinct types: (Type I, Type II & Type III). In silver containing glasses with embedded silver ions Ag+, DLW induces the creation of fluorescent silver clusters Agmx+ at the vicinity of the interaction voxel. In this work, we present a new type of refractive index change, called type A that is based on the creation of the photo-induced silver clusters allowing the creation of new linear and nonlinear optical waveguides in silver containing glasses. Various waveguides, a 50-50 Y beam splitter, as well as optical couplers, were written based on type A modification inside bulk glasses and further characterized. On the other hand, a comparison study between type A and type I waveguides is presented, showing that finely tuning the laser parameters allows the creation of either type A or type I modification inside silver containing glasses. Finally, based on type A near-surface waveguides, a highly sensitive refractive index sensor is created in a 1 cm glass chip, which could exhibit a pioneer demonstration of double sensing refractive ranges. The waveguiding properties observed and reported in the bulk of such silver containing glasses were transposed to ribbon shaped fibers of the same material. Those results pave the way towards the fabrication of 3D integrated circuits and fiber sensors with original fluorescent, nonlinear and plasmonic properties that are not accessible using the standard type I modification

No description available.

Dans différents domaines industriels, la problématique du diagnostic prend une place importante. Ainsi, le contrôle d’aspect des composants optiques est une étape incontournable pour garantir leurs performances opérationnelles. La méthode conventionnelle de contrôle par un opérateur humain souffre de limitations importantes qui deviennent insurmontables pour certaines optiques hautes performances. Dans ce contexte, cette thèse traite de la conception d’un système automatique capable d’assurer le contrôle d’aspect. Premièrement, une étude des capteurs pouvant être mis en oeuvre par ce système est menée. Afin de satisfaire à des contraintes de temps de contrôle, la solution proposée utilise deux capteurs travaillant à des échelles différentes. Un de ces capteurs est basé sur la microscopie Nomarski ; nous présentons ce capteur ainsi qu’un ensemble de méthodes de traitement de l’image qui permettent, à partir des données fournies par celui-ci, de détecter les défauts et de déterminer la rugosité, de manière robuste et répétable. L’élaboration d’un prototype opérationnel, capable de contrôler des pièces optiques de taille limitée valide ces différentes techniques. Par ailleurs, le diagnostic des composants optiques nécessite une phase de classification. En effet, si les défauts permanents sont détectés, il en est de même pour de nombreux « faux » défauts (poussières, traces de nettoyage. . . ). Ce problème complexe est traité par un réseau de neurones artificiels de type MLP tirant partie d’une description invariante des défauts. Cette description, issue de la transformée de Fourier-Mellin est d’une dimension élevée qui peut poser des problèmes liés au « fléau de la dimension ». Afin de limiter ces effets néfastes, différentes techniques de réduction de dimension (Self Organizing Map, Curvilinear Component Analysis et Curvilinear Distance Analysis) sont étudiées. On montre d’une part que les techniques CCA et CDA sont plus performantes que SOM en termes de qualité de projection, et d’autre part qu’elles permettent d’utiliser des classifieurs de taille plus modeste, à performances égales. Enfin, un réseau de neurones modulaire utilisant des modèles locaux est proposé. Nous développons une nouvelle approche de décomposition des problèmes de classification, fondée sur le concept de dimension intrinsèque. Les groupes de données de dimensionnalité homogène obtenus ont un sens physique et permettent de réduire considérablement la phase d’apprentissage du classifieur tout en améliorant ses performances en généralisation / In various industrial fields, the problem of diagnosis is of great interest. For example, the check of surface imperfections on an optical device is necessary to guarantee its operational performances. The conventional control method, based on human expert visual inspection, suffers from limitations, which become critical for some high-performances components. In this context, this thesis deals with the design of an automatic system, able to carry out the diagnosis of appearance flaws. To fulfil the time constraints, the suggested solution uses two sensors working on different scales. We present one of them based on Normarski microscopy, and the image processing methods which allow, starting from issued data, to detect the defects and to determine roughness in a reliable way. The development of an operational prototype, able to check small optical components, validates the proposed techniques. The final diagnosis also requires a classification phase. Indeed, if the permanent defects are detected, many “false” defects (dust, cleaning marks. . . ) are emphasized as well. This complex problem is solved by a MLP Artificial Neural Network using an invariant description of the defects. This representation, resulting from the Fourier-Mellin transform, is a high dimensional vector, what implies some problems linked to the “curse of dimensionality”. In order to limit these harmful effects, various dimensionality reduction techniques (Self Organizing Map, Curvilinear Component Analysis and Curvilinear Distance Analysis) are investigated. On one hand we show that CCA and CDA are more powerful than SOM in terms of projection quality. On the other hand, these methods allow using more simple classifiers with equal performances. Finally, a modular neural network, which exploits local models, is developed. We proposed a new classification problems decomposition scheme, based on the intrinsic dimension concept. The obtained data clusters of homogeneous dimensionality have a physical meaning and permit to reduce significantly the training phase of the classifier, while improving its generalization performances

L’endommagement laser est le résultat d’une interaction laser-matière qui se traduit par une dégradation physique des optiques, entraînant une détérioration de leur fonction optique. C'est un des facteurs limitant le développement des lasers de puissance et de leurs applications. Dans les matériaux diélectriques et en régime femtoseconde, ce phénomène repose sur des processus non linéaires et dépend des propriétés intrinsèques du matériau, contrairement au régime nanoseconde. Un banc d'endommagement laser femtoseconde a été développé et appliqué à l'étude du comportement des couches minces diélectriques. Le caractère déterministe de l'endommagement femtoseconde a été confirmé sur les substrats et les couches minces. Nous montrons de plus que les couches minces sont le siège d’effets transitoires, capables d’affecter le seuil d’endommagement, lorsque la densité d’électrons libres atteint une valeur critique. Un modèle dynamique a été développé afin de prendre en compte ces effets. Son efficacité à prédire l’évolution du seuil d’endommagement en fonction de la durée de l’impulsion a été démontrée expérimentalement. Les tests d’endommagement menés sur des monocouches HfO2 montrent une dépendance du seuil d’endommagement avec la technique de dépôt. Par ailleurs le comportement linéaire du seuil d’endommagement en fonction de la largeur de bande interdite a été confirmé pour les oxydes purs. Enfin nous présentons la première étude exhaustive sur la tenue au flux de mixtures d'oxydes, menée en collaboration avec le centre laser de l’Université de Vilnius, Lituanie et le Laser Zentrum Hannover LZH, Allemagne. / The laser damage is the result of a laser-matter interaction leading to the physical degradation of the optics, causing a deterioration of their optical function. This is one factor limiting the development of high power lasers and their applications. In dielectric materials and sub-picosecond regime, this phenomenon is based on non-linear processes and depends on the intrinsic properties of the material, as opposed to the nanosecond regime. A bench dedicated to the measurement of laser damage threshold has been developed and applied to study the behavior of optical dielectric thin films at 1030nm. The deterministic nature of sub-picosecond damage was evidenced on the substrates and thin films. A predictive model based on photo-ionisation and avalanche effects was developed for interpretation of the measurements. This model is specific to the case of multilayer optical effects since interference effects and transient response of the films are taken into account. Its effectiveness in predicting the evolution of the damage threshold as a function of pulse duration on HfO2 films. Moreover, the linear behavior of the damage threshold with the band gap has been experimentally observed for oxide materials and described by the model. Finally we present the first exhaustive study on the optical resistance of oxides mixtures, conducted in collaboration with the University of Vilnius, Lithuania, and the Laser Zentrum Hannover LZH, Germany.

La tenue au flux des traitements de surfaces optiques constitue aujourd'hui un enjeu majeur pour le développement des lasers de puissance à courtes durées d'impulsion. L’étude des interactions laser-matière en régime sub-picoseconde a montré que l’initiation de l'endommagement laser est le résultat de processus d’excitation fortement non-linéaires (photoionisation, ionisation par impact et avalanche électronique). Dans cette thèse, un dispositif de tests multiparamétriques a été développé pour l’étude de la tenue au flux des composants optiques. Différentes études expérimentales ont été menées sur des matériaux diélectriques, en couche mince ou en matériau massif, afin d’apporter des données nouvelles sur les matériaux couches minces assez peu étudiés dans la littérature. L’étude de l’influence de la longueur d’onde a révélé différentes phases de prédominance des processus d’ionisation. L’influence du nombre de tirs à différentes longueurs d’ondes aussi a été étudiée, en considérant différentes techniques de dépôt de couches minces. L’interprétation de ces résultats expérimentaux est soutenue par un modèle de simulation numérique que nous présentons en détail dans le manuscrit. Une place, non moins importante, a été accordée dans notre travail à la métrologie de l’endommagement. Nous avons proposé et appliqué l’utilisation d’un dispositif original de mesure quantitative de phase pour l’analyse des processus d’endommagement. Et pour terminer nous avons développé un système de microscopie pompe-sonde afin de pousser les investigations sur les processus en jeu lors de l’interaction laser-matière en régime sub-picoseconde. / Laser fluence resistance of optical surfaces is a major challenge for the development of high power and short duration pulse lasers. Studies on laser matter interactions show that the damage initiation is the result of highly nonlinear excitation process such as photoionization, impact ionization and electronic avalanche. In this PhD thesis we focused on the study of the damage and the response of materials after this initiation and their dependence with laser parameters, this in order to better understand the complex mechanisms of damage, identify laws of relevant scales for applications, and enable new optical design with higher laser resistance and lifetimes. A multi parametric experimental testing setup was developed for studying laser resistance of optical components. To collect new data on thin film materials damage dependences, which have been less studied in the literature, different experimental studies have been conducted on dielectrics, in coating or bulk form. The study of the dependency of damage with laser wavelength reveals different ranges characterized by the electronic processes occurring during the interaction. We have considered also the effect of multiple pulse irradiations, with different wavelengths and on coatings realized by different technologies. All these experimental results have been discussed with the help of a numerical simulation model we have developed and presented in this thesis. We have also proposed an original method based on optical phase difference measurement for damage characterization and study. We finished with some experiments on the time resolved microscopy measurements and investigations of damage processes.

Ultraprecision single point diamond turning is required to produce parts with sub-nanometer surface roughness and sub-micrometer surface profiles tolerances. These parts have applications in the optics industry, where tight form accuracy is required while achieving high surface finish quality. Generally, parts can be polished to achieve the desired finish, but then the form accuracy can easily be lost in the process rendering the part unusable. Currently, most mid to low spatial frequency surface finish errors are inspected offline. This is done by physically removing the workpiece from the machining fixture and mounting the part in a laser interferometer. This action introduces errors in itself through minute differences in the support conditions of the over constrained part on a machine as compared to the mounting conditions used for part measurement. Once removed, the fixture induced stresses and the part’s internal residual stresses relax and change the shape of the generally thin parts machined in these applications. Thereby, the offline inspection provides an erroneous description of the performance of the machine. This research explores the use of a single, high resolution, capacitance sensor to quickly and qualitatively measure the low to mid spatial frequencies on the workpiece surface, while it is mounted in a fixture on a standard ultraprecision single point diamond turning machine after a standard facing operation. Following initial testing, a strong qualitative correlation exists between the surface profiling on a standard offline system and this online measuring system. Despite environmental effects and the effects of the machine on the measurement system, the capacitive system with some modifications and awareness of its measurement method is a viable option for measuring mid to low spatial frequencies on a workpiece surface mounted on an ultraprecision machine with a resolution of 1nm with an error band of ±5nm with a 20kHz bandwidth. / Thesis / Master of Applied Science (MASc)