Solution-processed organic field effect transistors (OFETs) have emerged in recent years as promising contenders to be part of electronic and optoelectronic circuits owing to their compatibility with low-cost high throughput roll-to-roll manufacturing technology. The stringent performance requirements for OFETs in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require the performance of single crystal-based OFETs, but these suffer from major scale-up challenges. To achieve device performance approaching that of single crystals with scalable, high throughput and industry-compatible solution coating of OFETs requires understanding and ultimately controlling the crystallization of organic semiconductors (OSCs), and producing very low defect-density thin films. In this thesis, we develop an understanding of the process-structure-property-performance relationship in OSCs that bring fresh insights into the nature of solution crystallization and lead to novel ways to control OSC crystallization, and finally help achieve fabrication of high-performance OFETs by scalable, high throughput and industry-compatible blade coating method. We probe the solution crystallization of OSCs by employing a suite of ex & in situ characterization techniques. This leads us to an important finding that OSC molecules aggregate to form a dense amorphous intermediate state and nucleation happens from this intermediate state during blade coating under a wide window of coating conditions. This phenomenon resembles the so-called two-step nucleation model. Two-step nucleation mediates the crystallization of a wide range of natural and synthetic products ranging from soft materials, such as proteins, biominerals, colloids and pharmaceutical molecules, to inorganic compounds. We go on to show that this nucleation mechanism is generally applicable to achieve formation of high-quality polycrystalline films in a variety of small molecule OSCs and their polymer blends. This phenomenon results in highly textured and well-connected domains, which exhibit reduced interfacial and bulk trap-state densities, helping raise the carrier mobility by one to two orders of magnitude in OFETs in comparison to direct nucleation. We extend the understanding developed for solution crystallization of various acenes and thiophene-based small molecule OSCs to the high-performance benzothieno-benzothiophene (BTBT) based small molecule OSCs. On this end, we develop protocols to fabricate high-quality thin films of BTBT based OSCs by blade coating at industrially compatible coating speeds (>100 mms-1). These films show massive single-domains with very few apparent defects when crystallized via multiple liquid-crystalline phases in two-step nucleation conditions, resulting in an average carrier mobility of ~10 cm2V-1s-1. To sum up, this thesis develops an understanding of OSC solution crystallization and efficient protocols to control polycrystalline thin film quality for high-performance OFETs. These protocols involve a combination of two-step nucleation pathway, solvent mixtures, polymer blends and device-manufacturing conditions. Our efforts enable to realize high-performance OFETs based on high-quality polycrystalline OSC thin films at industry-compatible conditions.

Despite significant advances in the field of organic electronic devices, a complete and thorough theoretical understanding of their operation is still missing. This study aims to deepen the understanding of the underlying physics of organic field-effect transistors (OFETs) through analytical modeling, numerical device simulations and experimental validations of contact-induced performance improvements and traps. The thesis presents a comprehensive methodology for reliable parameter extraction for the contact resistance of OFETs using conventional extraction methods originally developed for silicon-based transistors. A benchmarking strategy is proposed for accurate and reliable parameter extraction, involving a comparative study of different extraction techniques to ensure the most precise results. The study investigates the experimentally proven performance gain of OFETs with contact engineering on oxidized metal electrodes. Theoretical analysis is performed to identify the root causes of the observed performance enhancement, providing valuable insight into the underlying physics of contact engineering and its impact on OFET performance. In addition, the thesis explores the impact of dynamic trapping on highfrequency transistor performance and presents innovative methods for characterizing traps. Through the use of TCAD simulations, a comprehensive study of the internal quantities of organic transistors is conducted. The study provides a critical step towards developing a physics-based compact model for OFETs that can capture the essential physics of the device. Overall, this thesis provides comprehensive guidelines for reliable parameter extraction and performance improvement of OFETs. It makes significant contributions to the understanding of their underlying physics and lays the foundation for the development of physics-based compact models for OFETs, which could potentially revolutionize the field of organic electronics.

The work carried out in this thesis systematically investigates the correlation between microstructures and electronic properties of organic semiconductors. The major directions that were pursued in this thesis are: (i) studies on structure-property relationship by rational design and synthesis of monodisperse oligomers with varying chain-lengths (ii) role of electronic properties and aggregation (microstructures) in governing singlet fission (SF). In the first part of the thesis, the optical, structural and charge transport properties of Diketopyrrolopyrrole (DPP)-based oligomers, as a function of the chain length, has been discussed. The energy bands became wider with an increase in chain length and a gain in backbone electron affinity was observed, with an offset in microstructural order. With an increase in chain length, the tendency to form intramolecular aggregates increased as compared to intermolecular aggregates due to the onset of backbone conformational defects and chain folding. An insight into the solid-state packing and microstructural order has been obtained by steady-state and transient spectroscopy, grazing incidence small angle x-ray scattering (GISAXS), atomic force microscopy (AFM) and transmission electron microscopy (TEM) studies. The charge-carrier mobilities varied in accordance with the degree of microstructural order as: dimer > trimer > pentamer. A library of DPP-DPP based trimers was also generated by modifying the donor chromophore (phenyl, thiophene and selenophene) in the oligomer backbone. Highest n-channel mobility of ~0.2 cm2V-1s-1 was obtained which validated that: (a) the effect of solid-state packing predominates the effect of backbone electronic structure on charge carrier mobility. Although oligomers possess lesser backbone defects than polymers in general, their charge carrier mobilities were not comparable to that of 2DPP-OD-TEG polymer, which forms highly oriented and isotropic edge-on crystallites/microstructures in the thin film, shows high n-channel mobility of 3 cm2V-1s-1 and band-like transport ;(b) although delocalized electronic states are achieved at greater chain lengths, the degree of solid-state microstructural order drastically reduces which leads to lower charge carrier mobilities; (c) conformational collapse resulted in lower electron mobilities and an increase in ambipolarity. The later part of the thesis debates on the relative contribution of electronic structure and aggregation (microstructures) in governing singlet fission (SF). Motivated by the recent SF model in carotenoid aggregates, a DPP-DPP based oligomer was synthesized by incorporating a vinylene bridge to imbue “polyene” character in the chromophore. Transient Spectroscopy (TA) measurements were carried out to monitor the formation of triplet states in the oligomer and to probe the occurrence of singlet fission. Although the oligomer exhibits “polyene” character like a typical “carotenoid aggregate”, it did not show singlet fission because of the additional stabilization of the singlet (S1) state which reduces the ∆EST. This study rationalized the importance of judicious control of band structures as well as microstructures to observe the SF phenomenon in this category of chromophores. The novel synthetic protocol provides the scope to tailor DPP-DPP based materials with desired effective conjugation lengths and side chains and can foreshow great prospects for future generation of organic electronics.

Organic semiconducting polymers are widely employed in organic electronics such as organic photovoltaics (OPVs), organic field-effect transistors (OFETs) and organic light emitting diodes (OLEDs). Their remarkable mechanical and charge transport properties as well as solution processability allow low-cost fabrication of light-weight and flexible devices. Among them indacenodithiophene (IDT)-based materials are promising candidates for application in organic electronics. Due to their low energetic disorder, extended conjugation and high electron density the IDT-based polymers show high field-effect mobilities and high absorption coefficients. However, their synthesis suffers from long reaction sequences and is often accomplished using toxic materials. Commercialization requires development of more efficient and sustainable reaction pathways to ease tailoring of structures and to limit molecular defects. Herein, the development of new synthetic pathways towards IDT-based polymers is presented in which all C-C coupling steps are achieved by C-H activation – an atom-economic alternative to conventional transition-metal catalyzed cross couplings. Two different strategies were established to synthesize a series of well-defined IDT-based homo- and copolymers with different side chain patterns and varied molecular weights. The first way starts by synthesis of a precursor polymer and subsequent cyclization affording IDT homopolymers. In the second approach, cyclized IDT monomers were prepared first and then polymerized using direct arylation polycondensation (DAP) yielding IDT homo- and copolymers. The synthetic pathways were optimized in terms of maximizing molecular weights and limiting defect structures. While the first pathway enables synthesis of well-defined homopolymers, the latter is the method of choice for preparation of IDT-based copolymers in high yields and adjustable molecular weights. The polymers were further characterized in detail by optical, thermal, electrical and morphological analyses. OFETs as well as all-polymer solar cells (all-PSCs) were fabricated to investigate the influence of structural modifications and molecular weight on their optoelectronic performance. Thus, this thesis provides a comprehensive study of the structure-property correlations of IDT-based polymers and simplified synthetic protocols for the design and preparation of donor-acceptor copolymers in the future.

The Thesis reports charge transport studies on conducting polymers, polymer carbon nanotube composites and organic semiconductor devices. Conducting and semiconducting polymers consisting of π-conjugated chains have attracted considerable attention as they combine the optoelectronic properties of semiconductors with mechanical properties and processing advantages of plastics. The chemical/electrochemical/photodoping of these semiconducting polymers can tune the Fermi levels and conductivity in a controlled way, and hence the properties of devices can be easily tailored to suit in several applications. Carbon nanotube (CNT) is another another novel promising material for electronic/optoelectronic applications. Lately there has been a great interest in developing composites of polymer and CNTs to utilize the advantages of both CNTs and polymers. The inclusion of CNTs in polymers improves the mechanical, electrical and thermal properties since the aspect ratio (ratio of length to diameter) is very large, as well its density is rather low. The Thesis consists of 6 chapters. First chapter is a brief introduction of general and transport properties of conducting polymers and polymer-carbon nanotube composites. In Chapter 2, the sample preparation and experimental techniques used in this work are discussed. The charge transport in poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) is presented in Chapter 3. Chapter 4 focuses on the transport measurements in the polymer-CNT composite samples. Chapter 5 elaborates the ac and dc characterization of organic field-effect transistors (OFETs). And chapter 6 presents the conclusion and future directions of the work that has been presented in the Thesis. Chapter 1: In the scientific and technological revolution of the last few years, the study of high performance materials has been steadily increasing including the study of carbon-based materials. Conducting polymers have special properties that are interesting for this new technology. The charge transport in conjugated polymers is important to optimize the performance of devices. The discovery of CNTs with exceptional thermal, mechanical, optical, electrical and structural properties has facilitated the synthesis of new type of nanocomposites with very interesting properties. Nanocomposites represent a guest-host matrix consisting of easily processible functionalized conjugated polymer as host, incorporating CNTs as fillers with versatile electronic and magnetic properties, which provide a wide range of technological applications. To optimize their electrical properties it is essential to understand the charge transport mechanism in detail. Chapter 2: The multi-wall carbon nanotubes (MWNTs) grown by thermal chemical vapor deposition (CVD) are mixed with a 1:1 mixture of 98% H2SO4 and 70% HNO3 to produce sulfonic acid functionalized multi-wall carbon nanotubes (s-MWNTs). The s-MWNTs are dispersed in a solution of Nafion by ultrasonication and then cast on a glass substrate and slowly dried by moderate heating to obtain the composite films. Polyaniline (PANI)-MWNT composites were obtained by carrying out the chemical synthesis of nanofibrilar PANI in the presence of CNTs. This water dispersible PANIMWNT composite contains well segregated MWNTs partially coated by nanofibrilar PANI. The ac and dc charge transport measurements suggest hopping transport in these materials. OFETs are fabricated with pentacene, poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT) and poly(3-hexylthiophene) (P3HT) as active materials. A novel technique is used to characterize the acphotoresponse of these OFETs. Chapter 3: Charge transport studies on PEDOT-PSS have been carried out and found that it correlates with the morphology. The dc conductivity of PEDOT–PSS shows enhanced delocalization of the carriers upon the addition of dimethyl sulfoxide (DMSO) and this is attributed to the extended chain conformation. PEDOT-PSS is known to form a phase-segregated material comprising highly conducting PEDOT grains that are surrounded by a sea of weakly ionic-conducting PSS and a wide variation in the charge transport properties of PEDOT-PSS films is attributed to the degree of phasesegregation of the excess insulating polyanion. The magnetotransport and temperature dependent ac transport parameters across different conducting grades of PEDOT-PSS processed with DMSO were compared. Depending on the subtle alterations in morphology, the transport at low temperatures is shown to vary from the hopping regime (Baytron P) to critical regime of the metal-insulator transition (Baytron PH510) There is a significant positive magnetoresistance (MR) for P–films, but this is considerably less in case of PH510-film. From the low temperature ac conductance it is found that the onset frequency for PH510 is nearly temperature independent, whereas in P type it is strongly temperature dependent, again showing the superior transport in PH510. The presence of ‘shorter network connections’ together with a very weak temperature dependence down to ~ 5 K, suggest that the limitation on transport in PH510 arises from the connectivity within the PEDOT-rich grain rather than transport via the PSS barriers. Chapter 4: DC and AC charge transport properties of Nafion s-MWNT and PANI-MWNT composites are studied. Such a detailed investigation is required to optimize the correlation among morphology and transport properties in these composites towards applications in field-effect transistors, antistatic coating, electromagnetic shielding, etc. The conductivity in Nafion s-MWNT shows a percolative transport with percolation threshold pc = 0.42 whereas such a sharp percolation is absent in PANI-MWNT composite since the conduction via PANI matrix smears out the onset of rapid increase in conductivity. Three-dimensional variable range hopping (VRH) transport is observed in Nafion s-MWNT composites. The positive and negative MR data on 10 wt. % sample are analyzed by taking into account forward interference mechanism (negative MR) and wave-function shrinkage (positive MR), and the carrier scattering is observed to be in the weak limit. The electric-field dependence, measured to high fields, follows the predictions of hopping transport in high electric-field regime. The ac conductivity in 1 wt. % sample follows a power law: ( )  A s , and s decreases with increasing temperature as expected in the correlated barrier hopping (CBH) model. In general, Mott’s VRH transport is observed in PANI-MWNT samples. It is found that the MWNTs are sparingly adhered with PANI coatings, and this facilitates inter-tube hopping at low temperatures. The negative MR of MWNT-PANI composites suggest that the electronic transport at low temperatures is dominated by MWNT network. AC impedance measurements at low temperatures with different MWNT loading show that ac conductivity become temperature independent as the MWNT content increases. The onset frequency for the increase in conductivity is observed to be strongly dependent on the MWNT weight percentage, and the ac conductivity can be scaled onto a master curve given by  ( )  0[1 k( 0 )s ]. Chapter 5: Organic field-effect transistors (OFETs) based on small molecules and polymers have attracted considerable attention due to their unique advantages, such as low cost of fabrication, ease of processing and mechanical flexibility. Impedance characterization of these devices can identify the circuit elements present in addition to the source-drain (SD) channel, and the bottlenecks in charge transport can be identified. The charge carrier trapping at various interfaces and in the semiconductor can be estimated from the dc and ac impedance measurements under illumination. The equivalent circuit parameters for a pentacene OFET are determined from low frequency impedance measurements in the dark as well as under light illumination. The charge accumulation at organic semiconductor–metal interface and dielectric semiconductor interface is monitored from the response to light as an additional parameter to find out the contributions arising from photovoltaic and photoconductive effects. The shift in threshold voltage is due to the accumulation of photogenerated carriers under SD electrodes and at dielectric–semiconductor interface, and also this dominates the carrier transport. Similar charge trapping is observed in an OFET with PBTTT as the active material. This novel method can be used to differentiate the photophysical phenomena occurring in the bulk from that at the metal-semiconductor interface for the polymer. Chapter 6: The conclusions from the various works presented in the thesis are coherently summarized in this chapter. Thoughts for future directions are also summed up.