No description available.

No description available.

Metal-Organic Frameworks (MOFs), a class of porous materials realized via reticular construction of a plethora of organic linkers and metal nodes, have emerged as excellent candidates for light-harvesting compositions (LHC), photo or electrocatalysis. This is due to their ability to organize chromophores and metal nodes with desired functionalities, and remarkable porosity that allows efficient mass transfer of reactants and electrolytes. Recent studies have shown intriguing delocalized excited state of the orderly organized pigments in MOFs. Furthermore, the accessible pores/channels allow it to host complementary optical/redox active species within the frameworks by means of de novo or postsynthetic functionalization, as a manner for MOF compositions to integrate functionalities beyond photosensitizer, such as photo/electrocatalytic sites. In such multi-component assemblies, profound understanding of charge transfer and separation process is crucial to make the designed LHC efficient. Therefore, we could adopt chromophoric MOFs as a scaffold to systematically investigate photoinduced charge transfer by installing judiciously selected redox moieties into MOFs, whose unique electronic properties could define distinct electronic interplay with MOFs. From an aspect of further applications, photo-generated electrons can be utilized more efficiently by an external electric field applied on MOF films, which prolongs the charge-separation lifetime. For this purpose, sufficient electrical conductivity is necessary to allow charges delivered across the MOF film. Considering a large energy mismatch between the majority of traditional metal nodes including metal oxo clusters and carboxylic based struts, charge transport is defined by a slow hopping process, which hinders the harvesting of relatively short-lived separated charges. Hence, developing neoteric linkage chemistry is critically needed to overcome the charge-transport challenge.Keeping these points in mind, the scope of this dissertation mainly focuses on unraveling the fundamental principles of photoinduced charge transfer and separation, ground-state charge transport boosted by nontraditional coordination chemistry and incorporation of complementary redox species, and their substantial correlation with MOF-based photocatalysis, electrocatalysis and photoelectrocatalysis. The first chapter lays the foundational knowledge regarding generic properties (chemical and physical) of MOFs, and adopted typical postsynthetic functionalization method, namely, solvent-assisted ligand incorporation (SALI), and other physical processes including photoinduced charge and energy transfer among components within MOFs, and mechanism of electron transport, that has so far been understood, in MOFs driven by an external electric field and commonly used approaches to measure that. Chapter two and three reveal the rule to control photoinduced charge transfer in MOF compositions prepared by the installation of a series of zinc porphyrins possessing gradient excited-state and frontier-orbital energy that can define distinct charge-transfer driving force into the mesopore of a photosensitizing MOF, NU-1000. These compositions show potential for their utilization as artificial light-harvesting assemblies. Chapter four highlights new design for solid porous CO2 reduction catalysts realized by introducing cobalt phthalocyanine into NU-1000. Importantly, we interpreted the catalytic activity from the aspect of charge transport efficiency, by comparing with catalysts constituted by NU-1000 and different molecular catalysts. To harvest the photo-generated electrons, an external electric field can be applied on MOF films deposited on transparent electrodes under photoexcitation, for which sufficient electrical conductivity is a must. Therefore, in chapter five, a new semiconducting coordination polymer framework was developed by employing a novel carbodithioate group for the linkage with nickel(II) that extends in three dimensions, which shows enhanced, electrical conductivity (i.e. 10-6 – 10-7 S cm-1) in contrast to traditional carboxylate-based MOFs due to a more delocalized electronic feature of the carbodithioate-nickel cluster. More importantly, its unique electronic properties, especially a long-lived charge-separation state captured by transient-absorption technique, could alleviate the compromise between electrical conductivity and charge separation (resulted from bandgap) of light-harvesting material. We then extend this binding group to chromium(III), as introduced in chapter 6, leading to a paramagnetic 3D coordination polymer with metallic conductivity as opposed to its nickel counterpart.

No description available.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第25015号 / 工博第5192号 / 新制||工||1991(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 古川 修平, 教授 生越 友樹, 教授 杉安 和憲 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

No description available.

No description available.

Metal-Organic Frameworks (MOFs) are hybrid materials and are acknowledged as an important class of functional solid-state materials with high scientific interest in academia and industry alike. Their modular nature in terms of structural and compositional diversity, tunability, high surface area, and controlled pore size renders MOFs as the ideal candidate to address various persistent challenges pertaining to gas storage/separation, catalysis, drug delivery, and smart sensing. Through the field of reticular chemistry, targeted structures can be constructed through multiple design approaches, based on preselected building blocks prior to the assembly process. This thesis illustrates the merit of the supermolecular building layer (SBL) approach for the rational construction and discovery of highly connected and porous MOFs based on rare earth cations. Specifically, the emphasis of this study is on (i) the rational design and synthesis of 3-periodic MOFs based on SBLs pillared by ditopic ligands through post-synthetic modification (PSM) and in situ reactions. (ii) The investigation of the mixed-ligand system with different lengths and geometry of ditopic ligands on the isolation of metal clusters with distinct pore sizes. (iii) Gaining an overall insight into the exploration of different synthetic pathways that control the assembly of rare earth MOFs.

The threat of chemical warfare agent (CWA) attacks has persisted into the 21st century due to the actions of terror groups and rogue states. Traditional filtration strategies for soldier protection rely on high surface area activated carbon, but these materials merely trap CWAs through weak physisorption. Metal-organic frameworks (MOFs) have emerged as promising materials to catalyze the degradation of CWAs into significantly less toxic byproducts. The precise synthetic control over the porosity, defect density, and chemical functionality of MOFs offer exciting potential of for use in CWA degradation as well as a wide variety of other applications. Developing a molecular-level understanding of gas-MOF interactions can allow for the rational design of MOFs optimized for CWA degradation. Our research investigated the fundamental interfacial interactions between CWA simulant vapors, specifically sulfur mustard (HD) simulants, and zirconium-based MOFs (Zr-MOFs). Utilizing a custom-built ultrahigh vacuum chamber with infrared spectroscopic and mass spectrometric capabilities, the adsorption mechanism, diffusion energetics, and diffusion kinetics of HD simulants were determined. For 2-chloroethyl ethyl sulfide (2-CEES), a widely used HD simulant, infrared spectroscopy revealed that adsorption within Zr-MOFs primarily proceeded through hydrogen bond formation between 2-CEES and the bridging hydroxyls on the secondary building unit of the MOFs. Through the study of 1-chloropentane and diethyl sulfide adsorption, we determined that 2-CEES forms hydrogen bonds through its chlorine atom likely due to geometric constraints within the MOF pore environment. Temperature-programmed desorption experiments aimed at determining desorption energetics reveal that 2-CEES remain adsorbed within the pores of the MOFs until high temperatures, but traditional methods of TPD analysis fail to accurately measure both the enthalpic and entropic interactions of 2-CEES desorption from a single adsorption site. Infrared spectroscopy was able to measure the diffusion of adsorbates within MOFs by tracking the rate of decrease in overall adsorbate concentrations at several temperatures. The results indicate that 2-CEES diffusion through the pores of the MOFs is a slow, activated process that is affected by the size of the pore windows and presence of hydrogen bonding sites. We speculate that diffusion is the rate limiting step in the desorption of HD simulants through Zr-MOFs at lower temperatures. Stochastic simulations were performed in an attempt to deconvolute TPD data in order to extract desorption parameters. Finally, a combination of vacuum-based and ambient-pressure spectroscopic techniques were employed to study the reaction between 2-CEES and an amine-functionalized MOF, UiO-66-NH2. Although the presence of water adsorbed within UiO 66 NH2 under ambient conditions may assist in the reactive adsorption of 2-CEES, the reaction proceeded under anhydrous conditions. / Doctor of Philosophy / Chemical warfare agents (CWAs) are some of the most toxic chemicals on the planet and their continued use by terror groups and rogue nations threaten the lives of both civilians and the warfighter. Our work was motivated by a class of high surface area, highly porous materials that have shown the ability to degrade CWAs, specifically mustard gas, into less harmful byproducts. By determining the adsorption mechanism (how and where mustard gas “sticks” to the material), diffusion rates (how quickly mustard gas can travel through the pores of to reach the binding sites), and desorption energies (how strongly mustard gas “sticks” to the binding sites), we can alter the structure of these materials and to efficiently trap mustard gas and render it harmless. In the research described in this dissertation, we examined these fundamental interactions for a series of molecules that mimic the structure of mustard gas. and linear alkanes within several metal-organic frameworks with varying pore size. We observed the size of the pore environment affects the orientation that a given molecule sticks to binding sites as well as how quickly these compounds diffuse through the MOF. While the majority of these studies were conducted in a low-pressure environment that eliminated the presence of gas molecules in the atmosphere, research that exposed a MOF to a mustard gas mimic in an ambient environment demonstrated that gas molecules present in the atmosphere, especially water, can greatly impact the chemical interactions between mustard gas and zirconium-based MOFs.