Spelling suggestions: "subject:"organisk kein"" "subject:"organiska kein""
81 |
De Novo Design and Characterization of Surface Binding Peptides - Steps toward Functional SurfacesNygren, Patrik January 2006 (has links)
The ability to create surfaces with well-defined chemical properties is a major research field. One possibility to do this is to design peptides that bind with a specific secondary structure to silica nanoparticles. The peptides discussed in this thesis are constructed to be random coil in solution, but are “forced” to become helical when adsorbed to the particles. The positively charged side-chains on the peptides strongly disfavor an ordered structure in solution due to electrostatic repulsion. When the peptides are introduced to the particles these charges will strongly favor the structure because of ion pair bonding between the peptide and the negatively charged nanoparticles. The peptide-nanoparticle system has been thoroughly investigated by systematic variations of the side-chains. In order to determine which factors that contributes to the induced structure, several peptides with different amino acid sequences have been synthesized. Factors that have been investigated include 1) the positive charge density, 2) distribution of positive charges, 3) negative charge density, 4) increasing hydrophobicity, 5) peptide length, and 6) by incorporating amino acids with different helix propensities. Moreover, pH dependence and the effect of different nanoparticle curvature have also been investigated. It will also be shown that the system can be modified to incorporate a catalytic site that is only active when the helix is formed. This research will increase our understanding of peptide-surface interactions and might be of importance for both nanotechnology and medicine.
|
82 |
Dinuclear Manganese Complexes for Artificial Photosynthesis : Synthesis and PropertiesAnderlund, Magnus January 2005 (has links)
This thesis deals with the synthesis and characterisation of a series of dinuclear manganese complexes. Their ability to donate electrons to photo-generated ruthenium(III) has been investigated in flash photolysis experiments followed by EPR-spectroscopy. These experiment shows several consecutive one-electron transfer steps from the manganese moiety to ruthenium(III), that mimics the electron transfer from the oxygen evolving centre in photosystem II. The redox properties of these complexes have been investigated with electro chemical methods and the structure of the complexes has been investigated with different X-ray techniques. Structural aspects and the effect of water on the redox properties have been shown. One of the manganese complexes has been covalently linked in a triad donor-photosensitizer-acceptor (D–P–A) system. The kinetics of this triad has been investigated in detail after photo excitation with both optical and EPR spectroscopy. The formed charge separated state (D––P–A+) showed an unusual long lifetime for triad based on ruthenium photosensitizers. The thesis also includes a study of manganese-salen epoxidation reactions that we believe can give an insight in the oxygen transfer mechanism in the water oxidising complex in photosystem II.
|
83 |
Development of New Synthetic Routes to Organoboronates by Catalytic Allylic Substitution and C-H bond FunctionalizationOlsson, Vilhelm January 2009 (has links)
This thesis describes the development of new catalytic methods for the synthesis and application of organometallic reagents, mainly focusing on allylboronic acid derivatives. Thus, palladium pincer-complex catalysis has been applied for extending the scope of palladiumcatalyzed borylation reactions in the synthesis of regio- and stereodefined functionalized allylboronic acid derivatives. These novel allylboronic acids were also employed as substrates in palladium catalyzed regioselective coupling reactions with iodobenzenes. We have also developed a new one-pot sequence based on preparation of allyl- and vinylboronates via catalytic carbon-hydrogen bond activation/borylation reactions. The synthetic scope of the reaction as well as mechanistic studies on the borylation process are presented. Finally, the synthesis of new chiral palladium pincer-complexes is described. These species were employed as catalysts in asymmetric electrophilic allyation of imines.
|
84 |
Nitration of Oxo-pyramidines and Oxo-imidazolesLanglet, Abraham January 2006 (has links)
This thesis is mainly focused on the reactions of oxo-pyrimidines and oxo-imidazoles with nitric acid in sulfuric acid and properties of the gem-dinitro products formed in this process. Low temperature nitrations of 2-methylimidazoles produced – in addition to the known 2-methyl-5(4)-nitroimidazole – 2-(dinitromethylene)-5,5-dinitro-4-imidazolidinone and parabanic acid. This tetranitro compound was also obtained via nitration of 2-methyl-4,4-dihydro-(1H)-5- imidazolone. Thermal decomposition of 2-(dinitromethylene)-5,5-dinitro-4-imidazolidinone yielded 2-(dinitromethylene)-4,5-imidazolidinedione, which also was the product from the nitration of the new compound 2-methoxy-2-methyl-4,5-imidazolidienedione. Treatment of 2- (dinitromethylene)-5,5-dinitro-4-imidazolidinone with aqueous ammonia resulted in the previously unknown 1,1-diamino-2,2-dinitroethylene (Paper I). The nitration of some 2-substituted pyrimidine-4,6-diones in sulfuric acid, which afforded previously unknown 5,5-gem-dinitro-pyrimidine-4,6-diones in high yields, was studied. Alloxane was prepared in a one-step procedure by thermal decomposition of 5,5-dinitrobarbituric acid in hot acetic acid. The gem-dinitro products were found to be easily attacked by nucleophiles with concomitant formation of gem-dinitroacetyl derivatives, which in turn could be further hydrolysed to salts of dinitromethane and triureas (Papers II and III). Nitration of 4,6-dihydroxypyrimidine in sulfuric acid yielded nitroform as the sole product. This behaviour was tentatively explained by the formation of an intermediate, 5,5-dinitro-4,6- dihydroxypyrimidine, which underwent hydrolysis in the nitrating acid into gem-dinitroacetyl formamidine. This compound was further nitrated in the same reaction mixture into trinitroacetylformamidine, which finally underwent hydrolytic cleavage into nitroform. It was also demonstrated that gem-dinitroacetylureas could produce nitroform upon nitration. The structures of the proposed trinitroacetylureas were confirmed by the isolation of one of their derivatives (Paper IV). / QC 20100907
|
85 |
Fabrication and Functionalization of Graphene and Other Carbon Nanomaterials in SolutionWidenkvist, Erika January 2010 (has links)
In the last decades several new nanostructures of carbon have been discovered, including carbon nanotubes (CNTs), and the recently discovered 2-dimensional graphene. These new materials exhibit extraordinary and unique properties—making them extremely interesting both for fundamental science and for future applications. It is, however, of crucial importance to develop new and improved fabrication and processing methods for these carbon nanomaterials. In this thesis the concept of applying solution chemistry and solution-based techniques to fabricate and to deposit graphene and other carbon nanomaterials is explored. An area-selective deposition method was developed for CNT and carbon-coated iron nanoparticles. By utilizing organic functionalization the properties of the nanomaterials were tuned, with the purpose to make them soluble in a liquid solvent and also enable them to selectively adsorb to non-polar surfaces. The first step of the functionalization process was an acid treatment, to introduce defects in the materials. This method was also used to create defects in so-called carbon nanosheets (CNS). The effect of the defect formation on the electric properties of the graphene-like CNS was studied; it was found that the resistance of the CNS could be reduced to 1/50 by acid treating of the sample. Also, the effect of the created defects on gas adsorption to the surface of the CNS has been investigated. This was done using atomic layer deposition (ALD) of TiO2 on the CNS, and a clear change in nucleation be-havior was seen due to the acid-treatment. Furthermore, a solution-based new method for fabrication of graphene was developed; this method combines intercalation of bromine into graphite with ultrasonic treatment to exfoliate flakes into a solvent. From the solvent the flakes can be deposited onto an arbitrary substrate. Several important parameters in the method were investigated in order to optimize the process. One important parameter proved to be the choice of solvent in all steps of the procedure; it was shown to influence sonication yield, flake size, and deposition results. Toluene was identified as a suitable solvent. A mild heat-treatment of the starting material was also identified as a way to increase the exfoliation yield. Using this method, fabrication of few-layer graphene sheets was achieved and areas down to 3 layers in thickness were identified—this is in the very forefront of current solution-based graphene fabrication techniques.
|
86 |
Photoswitchable Peptidomimetics : Synthesis and Photomodulation of Functional PeptidesVaredian, Miranda January 2008 (has links)
The secondary structure of peptides is of pivotal importance for their biological function. The introduction of photoswitchable moieties into the backbones of peptides provides a unique way of regulating their conformation using an external stimulus, i.e., light. This thesis addresses the design, synthesis, and conformational analysis of photoswitchable peptidomimetics (PSPM). Examples of photomodulation of their functional properties are given. PSPM were prepared by incorporation of stilbene and thioaurone chromophores (switches) into dipeptides. Synthetic schemes for preparing these chromophores have been developed. Their suitability for incorporation into peptidomimetics has been demonstrated, and the resulting PSPM have been subjected to photoisomerization as well as computational and spectroscopic conformational analysis. The chromophore’s potential as a β-hairpin inducer was particularly interesting. To investigate the factors that govern the formation of β-hairpins, a series of decapeptides were prepared. Turn regions consisting of amino acids or chromophores were combined with antiparallel peptide strands with hydrophobic side chains. Linear tryptophan zipper peptidomimetics and cyclic peptidomimetics with a second, hairpin-inducing turn region were particularly promising. Comparison between switches revealed that the more flexible stilbene is a better choice for upholding the β-hairpin conformation than the thioaurone. The catalytic properties of an artificial hydrolase with a helix-loop-helix structure can be improved by introducing a stilbene photoswitch into the loop region. Photoisomerization regulates the catalytic activity of this peptidomimetic, and provides a means to control its aggregation state. The activity of the enzyme Mycobacterium tuberculosis ribonucleotide reductase was realized by incorporating a stilbene moiety into a linear peptide. Here, one photoisomer proved to be an inhibitor at nM concentrations. A significantly lower effect was observed for the other isomer. Finally, the decomposition of thioaurones, mainly to thioflavonols and thiaindenes, under conditions used for solid-phase peptide synthesis has been mapped. These findings are expected to have implications for future use of this chromophore.
|
87 |
Synthetic Routes towards 2-thia-7,8-diaza-cyclopenta[l]phenanthrene and 1-thia-7,8-diaza-cyclopenta[l]phenanthrene for Molecular Electronics ApplicationsGrandin, Anna January 2009 (has links)
Electric current is known to flow through the π-bonds in oligothiophenes. In order to use them as molecular wires it is important to use a technique where the potential gradients can be generated and maintained in supramolecular networks. A solution to this problem can be the use of metal complexes as junction points within such a network. In this project pathways to synthesize 2-thia-7,8-diaza-cyclopenta[l]phenanthrene (1) and 1-thia-7,8-diaza-cyclopenta[l]phenanthrene (2) for use in molecular electronic devices have been investigated. 4-(5-Bromo-thiophen-2-yl)2,2’-bipyridine (3) was prepared via Kröhnke reaction from 3-(5-bromothiophene-2-yl)acrolein and 1-(2-Oxo-2-pyridine-2-yl-ethyl)-pyridinium iodide in an overall yield of 14 %. Several routes towards 2-thia-7,8-diaza-cyclopenta[l]phenanthrene (1) and 1-thia-7,8-diaza-cyclopenta[l]phenanthrene (2) were tested. Since the original planned pathway did not work, lack of time made it impossible to complete the series of experiments that were needed. The synthesis of 2-thia-7,8-diaza-cyclopenta[l]phenanthrene (1) is almost finished. Due to the solvation problems, after the decarboxylation step, the product could not be analyzed by 1H-NMR in a satisfactory manner. The product was sent for analysis. A number of experiments towards 1-thia-7,8-diaza-cyclopenta[l]phenanthrene (2) were tested but few of them worked as planned. There is a lot of work left to be done in the synthesis of this compound but the lack of time made it impossible. The chemistry that has been achieved is the synthesis of 1,10-phenanthroline-5,6-dione in the synthesis of 2-thia-7,8-diaza-cyclopenta[l]phenanthrene (1). The following Hinsberg thiophene synthesis probably worked but due to solvation problems the product could not be isolated. The final product after hydrolysis and decarboxylation of the remaining ester groups after the Hinsberg thiophene synthesis was tested but the results were difficult to confirm. In the synthesis of 1-thia-7,8-diaza-cyclopenta[l]phenanthrene (2) several attempts to make 3,4-diamino-N,N-diethyl-benzamide were made. The attack from the primary amines on the carbonyl carbon made it necessary to protect them. The attempt to synthesize 3,4-bis-acetylamino-N,N-diethyl-benzamide also failed, both the attempt directly from the carboxylic acid and through the acylchloride, even though the amines were protected.
|
88 |
Synthesis of Organic Chromophores for Dye Sensitized Solar CellsHagberg, Daniel January 2007 (has links)
<p>This thesis is divided into four parts with organic chromophores for dye sensitized solar cells as the common feature and an introduction with general concepts of the dye sensitized solar cells.</p><p>The first part of the thesis describes the development of an efficient organic chromophore for dye sensitized solar cells. The chromophore consists of a triphenylamine moiety as an electron donor, a conjugated linker with a thiophene moiety and cyanoacrylic acid as an electron acceptor and anchoring group. During this work a strategy to obtain an efficient sensitizer was developed. Alternating the donor, linker or acceptor moieties independently, would give us the tool to tune the HOMO and LUMO energy levels of the chromophores. The following parts of this thesis regard this development strategy.</p><p>The second part describes the contributions to the HOMO and LUMO energy levels when alternating the linker moiety. By varying the linker the HOMO and LUMO energy levels was indeed shifted. Unexpected effects of the solar cell performances when increasing the linker length were revealed, however.</p><p>The third part describes the investigation of an alternative acceptor group, rhodanine-3-acetic acid, in combination with different linker lengths. The HOMO and LUMO energy level tuning was once again successfully shifted. The poor electronic coupling of the acceptor group to the semiconductor surface proved to be a problem for the overall efficiency of the solar cell, however.</p><p>The fourth part describes the contributions from different donor groups to the HOMO and LUMO energy levels and has so far been the most successful in terms of reaching high efficiencies in the solar cell. A top overall efficiency of 7.1 % was achieved.</p>
|
89 |
Transition Metal Hydrides : Biomimetic Studies and Catalytic ApplicationsEkström, Jesper January 2007 (has links)
In this thesis, studies of the nature of different transition metal-hydride complexes are described. The first part deals with the enantioswitchable behaviour of rhodium complexes derived from amino acids, applied in asymmetric transfer hydrogenation of ketones. We found that the use of amino acid thio amide ligands resulted in the formation of the R-configured product, whereas the use of the corresponding hydroxamic acid- or hydrazide ligands selectively gave the S-alcohol. Structure/activity investigations revealed that the stereochemical outcome of the catalytic reaction depends on the ligand mode of coordination. In the second part, an Fe hydrogenase active site model complex with a labile amine ligand has been synthesized and studied. The aim of this study was to find a complex that efficiently catalyzes the reduction of protons to molecular hydrogen under mild conditions. We found that the amine ligand functions as a mimic of the loosely bound ligand which is part of the active site in the hydrogenase. Further, an Fe hydrogenase active site model complex has been coupled to a photosensitizer with the aim of achieving light induced hydrogen production. The redox properties of the produced complex are such that no electron transfer from the photosensitizer part to the Fe moiety occurs. In the last part of this thesis, the development of a protocol for the transfer hydrogenation of ketones to secondary alcohols without the involvement of transition metal catalysts is described. A variety of ketones were efficiently reduced in 2-propanol using catalytic amounts of alkali alkoxide under microwave irradiation.
|
90 |
NMR spectroscopy and MD simulations of carbohydratesSäwén, Elin January 2011 (has links)
Knowledge about the structure, conformation and dynamics of carbohydrates is important in our understanding of the way carbohydrates function in biological systems, for example in intermolecular signaling and recognition. This thesis is a summary of five papers studying these properties in carbohydrate-containing molecules with NMR spectroscopy and molecular dynamics simulations. In paper I, the ring-conformations of the six-membered rings of two carbaiduronic analogs were investigated. These carbasugars could potentially be used as hydrolytically stable mimics of iduronic acid in drugs. The study showed that the equilibrium is entirely shifted towards the 4C1 conformation. Paper II is an investigation of the conformational flexibility and dynamics of two (1→6)-linked disaccharides related to an oligosaccharide epitope expressed on malignant tumor cells. In paper III, the conformational space of the glycosidic linkage of an alfa-(1→2) linked mannose disaccharide present in N- and O-linked glycoproteins, was studied. A maximum entropy analysis using different priors as background information was used and four new Karplus equations for 3JC,C and 3JC,H coupling constants, related to the glycosidic linkage, were presented. Paper IV describes a structural elucidation of the exopolysaccharide (EPS) produced by Streptococcus thermophilus ST1, a major dairy starter used in yoghurt and cheese production. The EPS contains a hexasaccharide repeating unit of d-galactose and d-glucose residues, which is a new EPS structure of the S. thermophilus species. In paper V, the dynamics of three generations of glycodendrimers were investigated by NMR diffusion and 13C NMR relaxation studies. Three different correlations times were identified, one global correlation time describing the rotation of the dendrimer as a whole, one local correlation time describing the reorientation of the C-H vectors, and one correlation time describing the pulsation of a dendrimer branch.
|
Page generated in 0.0672 seconds