21 |
P-WAVE EFIMOV PHYSICS FOR THREE-BODY QUANTUM THEORYYu-Hsin Chen (14070930) 09 November 2022 (has links)
<p> </p>
<p><em>P</em>-wave Efimov physics for three equal mass fermions with different symmetries has been modeled using two-body interactions of Lennard-Jones potentials between each pair of Fermi atoms, and is predicted to modify the long range three-body interaction potential energies, but without producing a real Efimov effect. Our analysis treats the following trimer angular momenta and parities, L<sup>Π</sup> = 0<sup>+</sup>,1<sup>+</sup>,1<sup>−</sup> and 2<sup>−</sup>, for either three spin-up fermions (↑↑↑), or two spin-up and one spin-down fermion (↑↓↑). Our results for the long range behavior in some of those cases agree with previous work by Werner and Castin and by Blume <em>et al.</em>, namely in cases where the s-wave scattering length goes to infinity. This thesis extends those calculated interaction energies to small and intermediate hyperradii comparable to the van der Waals length, and considers additional unitarity scenarios where the p-wave scattering volume approaches infinity. The crucial role of the diagonal hyperradial adiabatic correction term is identified and characterized. For the equal mass fermionic trimers with two different spin components near the unitary limit are shown to possess a universal van der Waals bound or resonance state near s-wave unitarity, when p-wave interactions are included between the particles with equal spin. Our treatment uses a single-channel Lennard-Jones interaction with long range two-body van der Waals potentials. While it is well-known that there is no true Efimov effect that would produce an infinite number of bound states in the unitary limit for these fermionic systems, we demonstrate that another type of universality emerges for the symmetry L<sup>Π</sup> = 1<sup>−</sup>. The universality is a remnant of Efimov physics that exists in this system at p-wave unitarity, and it leads to modified threshold and scaling laws in that limit. Application of our model to the system of three lithium atoms studied experimentally by Du, Zhang, and Thomas [Phys. Rev. Lett. <strong>102</strong>, 250402 (2009)] yields a detailed interpretation of their measured three-body recombination loss rates. </p>
|
22 |
An Approach to Mapping of Shallow Petroleum Reservoirs Using Integrated Conventional 3D and Shallow P- and SH-Wave Seismic Reflection Methods at Teapot Dome Field in Casper, WyomingOkojie-Ayoro, Anita Onohuome 17 November 2007 (has links) (PDF)
Using the famous Teapot Dome oil field in Casper, Wyoming, USA as a test case, we demonstrate how high-resolution compressional (P) and horizontally polarized shear (SH) wave seismic reflection surveys can overcome the limitations of conventional 3D seismic data in resolving small-scale structures in the very shallow subsurface (< 100-200 m (~328-656 ft)). We accomplish this by using small CMP intervals (5 ft and 2.5 ft, respectively) and a higher frequency source. The integration of the two high-resolution seismic methods enhances the detection and mapping of fine-scale deformation and stratigraphic features at shallow depth that cannot be imaged by conventional seismic methods. Further, when these two high-resolution seismic methods are integrated with 3D data, correlated drill hole logs, and outcrop mapping and trenching, a clearer picture of both very shallow reservoirs and the relationship between deep and shallow faults can be observed. For example, we show that the Shannon reservoir, which is the shallowest petroleum reservoir at Teapot Dome (depth to the top of this interval ranging from 76-198 m (250-650 ft)) can only be imaged properly with high-resolution seismic methods. Further, northeast-striking faults are identified in shallow sections within Teapot Dome. The strike of these faults is approximately orthogonal to the hinge of Teapot Dome. These faults are interpreted as fold accommodation faults. Vertical displacements across these faults range from 10 to 40 m (~33 to 131 ft), which could potentially partition the Shannon reservoir. The integration of 3D and high-resolution P-wave seismic interpretation helped us determine that some of the northeast-striking faults relate to deeper faults. This indicates that some deeper faults that are orthogonal to the fold hinge cut through the shallow Shannon reservoir. Such an observation would be important for understanding the effect on fluid communication between the deep and shallow reservoirs via these faults. Furthermore, the high-resolution seismic data provide a means to better constrain the location of faults mapped from drill hole logs. Relocation of theses faults may require re-evaluation of well locations as some attic oil may have not been drained in some Shannon blocks by present well locations. Therefore our study demonstrates how conventional 3D seismic data require additional seismic acquisition at smaller scales in order to image deformation in shallow reservoirs. Such imaging becomes critical in cases of shallow reservoirs where it is important to define potential problems associated with compartmentalization of primary production, hazard mitigation, enhanced oil recovery, or carbon sequestration.
|
23 |
Multi-Scale Neotectonic Study of the Clear Lake Fault Zone in the Sevier Desert Basin (Central Utah)Heiner, Brandon D. 21 January 2014 (has links) (PDF)
A multi-scale high-resolution geophysical and geological study was conducted in the Sevier Desert, central Utah, found within the Colorado Plateau-Basin and Range Transition Zone. The region is marked by with Quaternary volcanics and faulting as young as 660 yr B.P., with many fault scarps thought to have the potential for 7+ magnitude earthquakes. Three locations within the Sevier Desert which represent three different tectonic expressions of possible faulting at the surface were selected. These include a location found within surface sedimentation, a location with surface sedimentation and sub-surface basalts and a location with basalts, at the surface with very limited sedimentation. A suite of geophysical data were obtained including the use of P-wave, SH-wave, ground-penetrating radar (GPR). Auger holes, microprobe glass analysis, and mapping information were also completed in order to constrain and gain a more complete understanding of the sub-surface structure. These data were used to determine if there are sub-surface expressions of the possible surface scarps and if all the faults within the fault zone have the same structural style. The possible surface fault expressions were found to be connected to sub-surface fault expressions but with differing results within both sediments and basalts. Our data show that a multi-scale approach is needed to obtain a complete view of tectonic activity. The area faulting in the Sevier Desert penetrates at depth involving multiple complex styles that include some faulting that cuts recent lava flows and some that do not. The evidence also indicates that in at least some area faulting was episodic and others may be single events having implications on level of activity and hazard.
|
24 |
Modélisation de l’activité électrique des oreillettes avant et après ablation par cathéterSaha, Mirabeau 11 1900 (has links)
- Réalisé au centre de recherche de l'hospital du Sacré-Coeur de Montréal.
- Programme conjoint entre Université de Montréal et École Polytechnique de Montréal. / La fibrillation auriculaire (FA) est la forme d’arythmie la plus fréquente chez les êtres humains. Les mécanismes qui gouvernent l’initiation et les manifestations de cette maladie sont complexes, de nature dynamique, incluant des interactions à travers multiples échelles temporelles et spatiales dans les oreillettes. Ceci conduit très souvent à des manifestations imprévisibles et à des phénomènes qui émergent à l’échelle de l’organe, et qui se reflètent à l’échelle de tout le torse. Pour remédier à ce problème, on peut effectuer une ablation par cathéter, qui consiste à créer sur le tissu auriculaire des lésions linéaires qui bloquent et contraignent la propagation électrique. Parfois, ces lignes se reconnectent quelque temps après l’intervention, ce qui mène à des récidives, nécessitant ainsi une nouvelle intervention. Le but de ce projet est de modéliser un suivi de l’onde P post-opératoire pour détecter de manière non-invasive la reconnexion des lignes d’ablation et ainsi prédire les récidives de fibrillation auriculaire. À l’aide d’un modèle mathématique des oreillettes et du thorax, les ondes P sont simulées avant et après ablation, ainsi qu’après reconnexion de certaines lignes d’ablation. Les résultats montrent que la morphologie et les caractéristiques de l’onde P, ainsi que la carte d’activation sont affectées significativement par l’ablation et les reconnexions subséquentes. Ces différences sont plus facilement détectables lorsque les reconnexions naissent sur la veine pulmonaire inférieure gauche. Les changements sont plus importants pour les électrodes placées sur certaines zones du torse, notamment dans le dos. Ces nouvelles données aident actuellement à la conception d’une étude clinique pour valider l’approche. / Atrial fibrillation (AF) is the most common form of arrhythmia in humans. The mechanisms governing the initiation and manifestations of that disease are complex, dynamic in nature, including interactions across multiple spatial and temporal scales in the atria. This often leads to unpredictable manifestations and phenomena that arise at the level of the organ, and are reflected across the entire torso. To remedy that problem, catheter ablation can be carried out, which consists in creating linear lesions which block and force the electrical propagation in the atrial tissue. Sometimes these lines reconnect after the procedure, which leads to atrial fibrillation recurrence, thus requiring a new intervention. The purpose of this work is to model the monitoring of the postoperative P wave to detect non-invasively the reconnection of ablation lines and to predict atrial fibrillation recurrences. Using a mathematical model of the atria and thorax, the P waves are simulated before and after ablation, as well as after reconnection of some ablation lines. The results show that the morphology and the characteristics of the P wave as well as the activation map are significantly affected by the ablation lines and the subsequent reconnections. These differences are more easily detected when reconnections arise on the left inferior pulmonary vein. The changes are most important in electrodes placed in certain areas of the torso, notably in the back. These new data are helping to plan a clinical study to validate the approach.
|
25 |
Variações da estrutura da crosta, litosfera e manto para a plataforma Sul Americana através de funções do receptor para ondas P e S / Variations in the crustal, lithosphere and mantle structure for the South American platform using P- and S-waves receiver functionsBianchi, Marcelo Belentani de 29 August 2008 (has links)
Utilizamos neste trabalho duas metodologias distintas, a função do receptor com ondas P e a função do receptor com ondas S, para mapear variações da crosta e interfaces do manto (litosfera-astenosfera, 410 km e 660 km) em diferentes estações sismográficas na placa Sul-Americana. No estudo da interface litosfera-astenosfera, por ser o primeiro realizado nesta região, utilizamos as estações temporárias do IAG/USP em conjunto com as estações permanentes da rede mundial cobrindo toda a placa Sul-Americana. O estudo para as outras interfaces (Crosta-Manto, 410 km e 660 km) foi feito com caráter regional, buscando detalhar características da crosta e manto na região estável da placa. Para ambos os métodos os traços (sismogramas) foram rotacionados para o sistema LQT, deconvolvidos, agrupados por pontos de perfuração e por estações, e finalmente empilhados. Nos traços empilhados as fases convertidas de interesse (Ps, Ppps, Ppss+Psps e Sp) foram identificadas e interpretadas. Para a parte estável da placa obtivemos um valor médio de espessura da crosta de 39.4±0.6 km, variando desde 31.0±0.5 km para a província Borborema, até 41.3±1.0 km para a bacia do Paraná, onde aplicamos uma correção para descontar o efeito do sedimento. A razão de velocidade para a crosta, Vp/Vs, apresentou valores mais altos para a bacia do Paraná (~1.75±0.08) e região litorânea oriental (>1.74), enquanto que as regiões cratônicas (cráton São Francisco e Amazônico) apresentaram valores de Vp/Vs baixos (<1.72), chegando até 1.68. O valor médio de Vp/Vs para todas as estações analisadas foi de 1.73±0.02. As variações dos tempos para as interfaces do manto mostraram boa correlação com resultados de tomografia sísmica de outros trabalhos, indicando alterações de até 5% na velocidade das ondas sísmicas para o manto superior sob os crátons, uma deflexão de até 15 km na interface de 660 km para a região Sul da bacia do Paraná e se mostraram bem correlacionadas com as médias globais para as outras região estudadas. Por fim, a espessura da litosfera apresentou valores desde ~40 km, sob as regiões de ilhas oceânicas, até ~160 km, sob as regiões mais estáveis. Para as regiões oceânicas a espessura da litosfera se mostra correlacionada com a idade da placa. À medida que adentramos a parte continental, o limite litosfera-astenosfera se torna menos proeminente, atingindo profundidades maiores no interior dos continentes e menores para as regiões marginais. Para a zona de subducção, observamos duas possíveis litosferas, uma oceânica, subduzindo junto com a placa de Nazca, e outra pertencente à parte continental. / Two distinct methodologies, the P- and S-wave receiver functions, are used to map variations in the crustal parameters (thickness and Vp/Vs) and mantle interfaces (lithosphere-asthenosphere, 410 km and 660 km) on a number of different seismograph stations located in the South American plate. The results of the S receiver function for the lithosphere-asthenosphere boundary are the first of this kind ever performed in South American continent and showed the large scale variations of this interface. To perform this study we analyze data from various global permanent stations together with all available data from temporary stations operated by the IAG/USP during the last15 years. For both methods the traces (seismograms) were rotated to the LQT system, deconvolved, grouped by piercing points and stations, and finally stacked. In the stacked traces, the converted phases (Ps, Ppps, Ppss+Psps and Sp) were identified and interpreted. Inside the stable part of the plate we found a mean crustal thickness of 39.4±0.6 km, ranging from 31.0±0.5 km in Borborema Province up to 41.3±1.0 km in the Paraná Basin, where we applied a correction to remove the sediment effects on the crustal estimates. The crustal velocity ratios, Vp/Vs, showed higher values for the Paraná Basin (~1.75±0.08) and Ribeira belt (>1.74), while the cratonic regions (São Francisco and Amazon cratons) showed low values of Vp/Vs (<1.72), down to 1.68. The average Vp/Vs obtained for all stations was equal to 1.73±0.02. The observed times of the converted mantle phases presented a good correlation with other tomographic studies, indicating that the upper mantle for the cratonic roots may be characterized by a variation up to 5% in seismic velocities, a 15 km deflection in the South Paraná 660 km discontinuity (probably due to a decreased temperature caused by the subducted slab); for other regions the converted times were close to the global average. As a final result, the lithospheric thickness presented values ranging from ~40 km under oceanic islands, to ~160 km under the stable continental regions. We found that for the oceanic islands the thickness of the lithosphere is correlated with the age of the plate. When we go further inside the continents, the lithosphere-asthenosphere boundary becomes less sharp, reaching larger depths inside the continents and shallower depths near the continental margin. In the Andean subduction area, we observed two possibles lithospheres, one oceanic, subducting together with the Nazca plate, and another belonging to the Continent, parallel to the crust interface.
|
26 |
Sísmica de reflexão rasa multicomponente: Aquisição e inversão de tempos de trânsito e amplitudes / Shallow multicomponent reflection seismic: Acquisition, amplitude and traveltime inversionOleg Bokhonok 25 February 2011 (has links)
Neste trabalho avaliou-se a potencialidade do uso da sísmica rasa de reflexão multicomponente para investigação geológica-geotécnica. Foram abordados vários aspectos relacionados à aquisição dos dados sísmicos de reflexão multicomponente, com o objetivo de entender as vantagens e limitações do método para aplicação em investigações de subsuperfície rasa. Os ensaios de campo foram realizados em duas áreas, ambas em terrenos da Bacia Sedimentar de São Paulo, em área urbana da cidade de São Paulo. Para a interpretação dos dados sísmicos multicomponente foram investigados procedimentos para a inversão não-linear dos tempos de trânsito e das amplitudes. O testes realizados orientaram a escolha da aproximação não-hiperbólica mais apropriada para calculo dos tempos de trânsito visando à análise de velocidades do pacote acima do refletor. O estudo numérico desenvolvido para a inversão das amplitudes mostrou a viabilidade da estimativa das velocidades e densidades, acima e abaixo do refletor, empregando-se as equações de Zoeppritz para as ondas refletidas PP, PSv, SvP e SvSv, antes e depois do ângulo crítico. Dada a complexidade da inversão nao-linear das amplitudes, se fez necessário elaborar uma estratégia estocástica de otimização e desenvolver uma nova abordagem para análise da função objetivo multi-dimensional, garantindo confiabilidade ao resultado da inversão não-linear. Os resultados deste trabalho mostraram o potencial da sísmica de reflexão rasa multicomponente para caracterização geológica-geotécnica, possibilitando um melhor entendimento das camadas superficiais. / This thesis aims to evaluate the useful of the multicomponent seismic methods for shallow investigations, mainly its potential for the geotechnical and geological characterization of the nearsurface. Several aspects regarding the acquisition and processing data of multicomponent seismic data are discussed. They were based on data set acquired in the urban area of Sao Paulo city, Brazil. Two different areas were investigated. Both located in sedimentary terrains belonging to the Sao Paulo Sedimentary Basin. We present a non-linear travel time and seismic amplitude inversion scheme to quantitative interpretation of multicomponent seismic data. Several tests were performed to guide the choice of non-hyperbolic equation more suitable for travel time inversion aiming the velocity analysis above the reflector. A numerical experiment developed to solve the nonlinear inversion of seismic amplitudes showed the feasibility to estimate seismic interval velocities and layer densities above and below the reflector using the exact Zoeppritz equations for PP, PSv, SvP e SvSv reflected waves, before and after critical angle. Due to the apparent complexity of the nonlinear seismic amplitude inversion, it was necessary elaborate the strategy for stochastic optimization and develop a new approach to analyze the multi-dimensional objective function, with different implications for the accuracy and efficiency of the non-linear inversion. The study show the benefits of using the multicomponent seismic method for shallow geological-geotechnical characterization, improving the nearsurface understanding, once allows an integrated analyzes of a more complete record of the wave field.
|
27 |
Sísmica de reflexão rasa multicomponente: Aquisição e inversão de tempos de trânsito e amplitudes / Shallow multicomponent reflection seismic: Acquisition, amplitude and traveltime inversionBokhonok, Oleg 25 February 2011 (has links)
Neste trabalho avaliou-se a potencialidade do uso da sísmica rasa de reflexão multicomponente para investigação geológica-geotécnica. Foram abordados vários aspectos relacionados à aquisição dos dados sísmicos de reflexão multicomponente, com o objetivo de entender as vantagens e limitações do método para aplicação em investigações de subsuperfície rasa. Os ensaios de campo foram realizados em duas áreas, ambas em terrenos da Bacia Sedimentar de São Paulo, em área urbana da cidade de São Paulo. Para a interpretação dos dados sísmicos multicomponente foram investigados procedimentos para a inversão não-linear dos tempos de trânsito e das amplitudes. O testes realizados orientaram a escolha da aproximação não-hiperbólica mais apropriada para calculo dos tempos de trânsito visando à análise de velocidades do pacote acima do refletor. O estudo numérico desenvolvido para a inversão das amplitudes mostrou a viabilidade da estimativa das velocidades e densidades, acima e abaixo do refletor, empregando-se as equações de Zoeppritz para as ondas refletidas PP, PSv, SvP e SvSv, antes e depois do ângulo crítico. Dada a complexidade da inversão nao-linear das amplitudes, se fez necessário elaborar uma estratégia estocástica de otimização e desenvolver uma nova abordagem para análise da função objetivo multi-dimensional, garantindo confiabilidade ao resultado da inversão não-linear. Os resultados deste trabalho mostraram o potencial da sísmica de reflexão rasa multicomponente para caracterização geológica-geotécnica, possibilitando um melhor entendimento das camadas superficiais. / This thesis aims to evaluate the useful of the multicomponent seismic methods for shallow investigations, mainly its potential for the geotechnical and geological characterization of the nearsurface. Several aspects regarding the acquisition and processing data of multicomponent seismic data are discussed. They were based on data set acquired in the urban area of Sao Paulo city, Brazil. Two different areas were investigated. Both located in sedimentary terrains belonging to the Sao Paulo Sedimentary Basin. We present a non-linear travel time and seismic amplitude inversion scheme to quantitative interpretation of multicomponent seismic data. Several tests were performed to guide the choice of non-hyperbolic equation more suitable for travel time inversion aiming the velocity analysis above the reflector. A numerical experiment developed to solve the nonlinear inversion of seismic amplitudes showed the feasibility to estimate seismic interval velocities and layer densities above and below the reflector using the exact Zoeppritz equations for PP, PSv, SvP e SvSv reflected waves, before and after critical angle. Due to the apparent complexity of the nonlinear seismic amplitude inversion, it was necessary elaborate the strategy for stochastic optimization and develop a new approach to analyze the multi-dimensional objective function, with different implications for the accuracy and efficiency of the non-linear inversion. The study show the benefits of using the multicomponent seismic method for shallow geological-geotechnical characterization, improving the nearsurface understanding, once allows an integrated analyzes of a more complete record of the wave field.
|
28 |
Natural hydrate-bearing sediments: Physical properties and characterization techniquesDai, Sheng 27 August 2014 (has links)
An extensive amount of natural gas trapped in the subsurface is found as methane hydrate. A fundamental understanding of natural hydrate-bearing sediments is required to engineer production strategies and to assess the risks hydrates pose to global climate change and large-scale seafloor destabilization. This thesis reports fundamental studies on hydrate nucleation, morphology and the evolution of unsaturation during dissociation, followed by additional studies on sampling and pressure core testing.
Hydrate nucleation is favored on mineral surfaces and it is often triggered by mechanical vibration. Continued hydrate crystal growth within sediments is governed by capillary and skeletal forces; hence, the characteristic particle size d10 and the sediment burial depth determine hydrate morphologies in natural sediments. In aged hydrate-bearing sand, Ostwald ripening leads to patchy hydrate formation; the stiffness approaches to the lower bound at low hydrate saturation and the upper bound at high hydrate saturation. Hydrate saturation and pore habit alter the pore size variability and interconnectivity, and change the water retention curve in hydrate-bearing sediments.
The physical properties of hydrate-bearing sediments are determined by the state of stress, porosity, and hydrate saturation. Furthermore, hydrate stability requires sampling, handling, and testing under in situ pressure, temperature, and stress conditions. Therefore, the laboratory characterization of natural hydrate-bearing sediments faces inherent sampling disturbances caused by changes in stress and strain as well as transient pressure and temperature changes that affect hydrate stability. While pressure core technology offers unprecedented opportunities for the study of hydrate-bearing sediments, careful data interpretation must recognize its inherent limitations.
|
29 |
Variações da estrutura da crosta, litosfera e manto para a plataforma Sul Americana através de funções do receptor para ondas P e S / Variations in the crustal, lithosphere and mantle structure for the South American platform using P- and S-waves receiver functionsMarcelo Belentani de Bianchi 29 August 2008 (has links)
Utilizamos neste trabalho duas metodologias distintas, a função do receptor com ondas P e a função do receptor com ondas S, para mapear variações da crosta e interfaces do manto (litosfera-astenosfera, 410 km e 660 km) em diferentes estações sismográficas na placa Sul-Americana. No estudo da interface litosfera-astenosfera, por ser o primeiro realizado nesta região, utilizamos as estações temporárias do IAG/USP em conjunto com as estações permanentes da rede mundial cobrindo toda a placa Sul-Americana. O estudo para as outras interfaces (Crosta-Manto, 410 km e 660 km) foi feito com caráter regional, buscando detalhar características da crosta e manto na região estável da placa. Para ambos os métodos os traços (sismogramas) foram rotacionados para o sistema LQT, deconvolvidos, agrupados por pontos de perfuração e por estações, e finalmente empilhados. Nos traços empilhados as fases convertidas de interesse (Ps, Ppps, Ppss+Psps e Sp) foram identificadas e interpretadas. Para a parte estável da placa obtivemos um valor médio de espessura da crosta de 39.4±0.6 km, variando desde 31.0±0.5 km para a província Borborema, até 41.3±1.0 km para a bacia do Paraná, onde aplicamos uma correção para descontar o efeito do sedimento. A razão de velocidade para a crosta, Vp/Vs, apresentou valores mais altos para a bacia do Paraná (~1.75±0.08) e região litorânea oriental (>1.74), enquanto que as regiões cratônicas (cráton São Francisco e Amazônico) apresentaram valores de Vp/Vs baixos (<1.72), chegando até 1.68. O valor médio de Vp/Vs para todas as estações analisadas foi de 1.73±0.02. As variações dos tempos para as interfaces do manto mostraram boa correlação com resultados de tomografia sísmica de outros trabalhos, indicando alterações de até 5% na velocidade das ondas sísmicas para o manto superior sob os crátons, uma deflexão de até 15 km na interface de 660 km para a região Sul da bacia do Paraná e se mostraram bem correlacionadas com as médias globais para as outras região estudadas. Por fim, a espessura da litosfera apresentou valores desde ~40 km, sob as regiões de ilhas oceânicas, até ~160 km, sob as regiões mais estáveis. Para as regiões oceânicas a espessura da litosfera se mostra correlacionada com a idade da placa. À medida que adentramos a parte continental, o limite litosfera-astenosfera se torna menos proeminente, atingindo profundidades maiores no interior dos continentes e menores para as regiões marginais. Para a zona de subducção, observamos duas possíveis litosferas, uma oceânica, subduzindo junto com a placa de Nazca, e outra pertencente à parte continental. / Two distinct methodologies, the P- and S-wave receiver functions, are used to map variations in the crustal parameters (thickness and Vp/Vs) and mantle interfaces (lithosphere-asthenosphere, 410 km and 660 km) on a number of different seismograph stations located in the South American plate. The results of the S receiver function for the lithosphere-asthenosphere boundary are the first of this kind ever performed in South American continent and showed the large scale variations of this interface. To perform this study we analyze data from various global permanent stations together with all available data from temporary stations operated by the IAG/USP during the last15 years. For both methods the traces (seismograms) were rotated to the LQT system, deconvolved, grouped by piercing points and stations, and finally stacked. In the stacked traces, the converted phases (Ps, Ppps, Ppss+Psps and Sp) were identified and interpreted. Inside the stable part of the plate we found a mean crustal thickness of 39.4±0.6 km, ranging from 31.0±0.5 km in Borborema Province up to 41.3±1.0 km in the Paraná Basin, where we applied a correction to remove the sediment effects on the crustal estimates. The crustal velocity ratios, Vp/Vs, showed higher values for the Paraná Basin (~1.75±0.08) and Ribeira belt (>1.74), while the cratonic regions (São Francisco and Amazon cratons) showed low values of Vp/Vs (<1.72), down to 1.68. The average Vp/Vs obtained for all stations was equal to 1.73±0.02. The observed times of the converted mantle phases presented a good correlation with other tomographic studies, indicating that the upper mantle for the cratonic roots may be characterized by a variation up to 5% in seismic velocities, a 15 km deflection in the South Paraná 660 km discontinuity (probably due to a decreased temperature caused by the subducted slab); for other regions the converted times were close to the global average. As a final result, the lithospheric thickness presented values ranging from ~40 km under oceanic islands, to ~160 km under the stable continental regions. We found that for the oceanic islands the thickness of the lithosphere is correlated with the age of the plate. When we go further inside the continents, the lithosphere-asthenosphere boundary becomes less sharp, reaching larger depths inside the continents and shallower depths near the continental margin. In the Andean subduction area, we observed two possibles lithospheres, one oceanic, subducting together with the Nazca plate, and another belonging to the Continent, parallel to the crust interface.
|
30 |
Variações seculares de facies sedimentares de lama da plataforma continental de Cabo Frio (RJ)Cruz, Anna Paula Soares 11 May 2017 (has links)
Submitted by Biblioteca de Pós-Graduação em Geoquímica BGQ (bgq@ndc.uff.br) on 2017-05-11T16:44:42Z
No. of bitstreams: 1
CRUZ, A. P. S..pdf: 23384634 bytes, checksum: b417fd0517bbafbf4617a53288a634f4 (MD5) / Made available in DSpace on 2017-05-11T16:44:42Z (GMT). No. of bitstreams: 1
CRUZ, A. P. S..pdf: 23384634 bytes, checksum: b417fd0517bbafbf4617a53288a634f4 (MD5) / Conselho Nacional de Desenvolvimento Científico e Tecnológico / Universidade Federal Fluminense. Instituto de Química. Programa de Pós-Graduação em Geoquímica, Niterói, RJ / A análise conjugada das propriedades físicas dos se
dimentos, como a velocidade da
onda P, susceptibilidade magnética, porosidade e de
nsidade gama, com propriedades
geoquímicas como Carbono Orgânico Total e mineralog
ia dos sedimentos proporciona uma
melhor avaliação dos processos envolvidos, proveniê
ncia e fluxo de material sedimentar,
permitindo que as mudanças ambientais possam ser de
finidas. Os parâmetros físicos além de
serem capazes de quantificar a distribuição de espa
ço entre os poros, indicam alterações pós-
deposicionais. Dessa forma, este trabalho visa aval
iar as inter-relações existentes entre
parâmetros físicos de seções sedimentares para dete
rminação da origem do fluxo de materiais
ao longo da fácies de sedimentar depositado sobre a
plataforma continental de Cabo Frio.
Nesse sentido, pode-se notar que as variações de Vp
estão ligadas ao tamanho do grão, assim
como ao aumento no conteúdo orgânico e aumento no t
eor de água nos sedimentos marinhos.
Os valores de SM mostraram-se associados a assemblé
ia mineralógica e ao teor de água dos
testemunhos. Além disso, foi possível constatar que
a valência dominante da razão Fe
3+
/Fe
2+
,
foi o de Fe
3+
, que influenciou diretamente nos picos de SM. As p
ropriedades físicas definiram
seções nos diferentes box-core analisados, os quais
o BCCF10-01, 04 e 09, apresentaram
aumento de grãos finos, que pode estar relacionado
a hidrodinâmica local, e/ou aumento de
contribuição sedimentar alóctone entre 100 e 80 ano
s AP. Além disso, a assembléia de
minerais pesados indicou proveniência de rochas met
amórficas derivadas de metassedimentos
siliciclásticos, granitóides, rochas máficas e alca
linas pertencentes a própria região de Cabo
Frio e adjacências. Os maiores teores de minerais e
ncontrados no BCCF10-01 e BCCF10-13,
podem informar sobre a influência de correntes de f
luxo oeste, proveniente da baía de
Guanabara e de correntes de norte, provenientes dos
rios São João e Paraíba do Sul como
principais agentes de transporte dos particulados s
edimentares e minerais para a fácies
sedimentar de lama da plataforma de Cabo Frio. / The combined analysis of the physical properties of
sediments, such as the P-wave
velocity, magnetic susceptibility, porosity and gam
ma-density, with geochemical properties
such as Total Organic Carbon and mineralogy of sedi
ments provides a better assessment of
the processes involved, provenance and sedimentary
material flow, allowing environmental
changes can be defined.
The physical parameters in addition to being able t
o quantify the
distribution of space between the pores also indica
te pos-depositional changes. Thus, this
study aims to evaluate the interrelations between p
hysical parameters of sedimentary sections
to determine the source of the material flow along
the sedimentary faces deposited on the
continental shelf of Cabo Frio.
In this sense, it may be noted that variations in V
p are clearly
linked to the grain size, and an increase in organi
c content and increased water content in
marine sediments.
The MS values were associated with the mineral asse
mblage and water
content of the cores. In addition, it determined th
at the oxidation state of the dominant was
Fe
3+
, which directly influenced the peaks of MS.
Physical properties defined in the different
sections analyzed box-core, which the BCCF10-01, 04
and 09, showed an increase of fine
grains, which can be related to the local hydrodyna
mic or increased allochthonous sediment
contribution between 100 and 80 years BP.
In addition, the heavy mineral assemblage
indicated provenance of metamorphic rocks derived f
rom siliciclastic metasediments,
granitoids, mafic and alkaline rocks belonging to t
he region of Cabo Frio and surrounding
areas.
The highest minerals content found in BCCF10-01 and
BCCF10-13, can showed the
influence of flow west currents, from the Guanabara
Bay and currents of the north, from the
São João and Paraiba do Sul rivers as the main carr
iers of sedimentary particles and mineral
from mud faces of the Cabo Frio Shelf.
|
Page generated in 0.0622 seconds