1 |
Influência dos plastificantes alternativos ao dioctil ftalato nas propriedades de compostos de poli (cloreto de vinila)Mattana, Mônica January 2017 (has links)
O poli(cloreto de vinila) - PVC é considerado um polímero muito versátil devido à possibilidade deste ser formulado mediante a incorporação de aditivos, alterando suas características originais. Plastificantes a base de ftalatos, como o di(2-etilhexil) ftalato (DOP) são os mais utilizados, porém, existem regulamentações que estão restringindo a sua utilização, intensificando-se os estudos com possíveis alternativos. Desta forma, este trabalho visa avaliar a influência de plastificantes de diferentes naturezas nas propriedades físicas, mecânicas, térmicas e reológicas do PVC plastificado. Para formulação dos compostos foi utilizado a resina Norvic SP1000 produzida via suspensão, com VK65 e portanto, propícia para aplicações de materiais flexíveis, além disso, para cada composto utilizou-se uma dosagem de 60 pcr de sete diferentes plastificantes: DOP, considerado como referência para comparação dos resultados, diisononil ciclohexano (DINCH), di(2-etilhexil) ciclohexanoato (DOCH), di(2-etilhexil) adipato (DOA), di(2-etilhexil) tereftalato (DOTP), óleo de soja epoxidado (OSE) e plastificante de óleos vegetais (DIMIT) Neste estudo foram efetuadas avaliações nos compostos como, gelificação e fusão, reologia via reômetro de placas paralelas, densidade, índice de fluidez entre outras para compreender a influência de cada plastificante no processamento do composto e várias caracterizações no produto final como estabilidade térmica dos compostos via TGA, Metrastat, propriedades óticas, propriedades mecânicas como dureza Shore A, tração, resistência a abrasão, resiliência, envelhecimento em câmara UV assim como ensaios de exsudação dos plastificantes. Os resultados indicam comportamentos distintos do PVC em função da natureza química do plastificante utilizado. O plastificante DIMIT possui boa estabilidade térmica, porém os resultados de cor e parâmetros de processamento foram insatisfatórios quando comparados ao DOP, já os plastificantes OSE e DOA apresentaram bons resultados para as propriedades avaliadas. Conclui-se que dentre os plastificantes analisados não foi possível determinar qual seria o melhor para substituição direta do DOP considerando toda a gama de produtos flexíveis de PVC, contudo esse trabalho colabora para a avaliação e seleção do melhor plastificante com base nos requisitos de cada aplicação do produto. / The poly (vinyl chloride) - PVC is a very versatile polymer due to the possibility of being formulated by incorporating additives, which can change the resin characteristics. Plasticizers composed of phthalates, such as di(2-ethylhexyl) phthalate (DOP), are the most used, however, there are regulations restricting the use of this kind of plasticizers, intensifying studies with possible replacement alternatives. In this way, the objective of this work is to evaluate the influence of plasticizers from different sources in PVC, mainly physical, mechanical thermal stability, and rheological properties in the plasticized PVC. In the formulation of the compounds it was used the resin Norvic SP1000, product with VK65 and produced by suspension, suitable for flexible materials applications. In addition, it was used 60 phr of seven different plasticizers for each compound: DOP, considered as reference for all results, cyclohexane diisononyl (DINCH), di(2-ethylhexyl) cyclohexanoate (DOCH), di(2-ethylhexyl) adipate (DOA), di(2-ethylhexyl) terephthalate (DOTP), epoxidized soybean oil (OSE) and plasticizer produced from vegetable oils (DIMIT). In this study, the compounds were evaluated with many characterization analyzes, such as gelling and melting point in a torque rheometer, rheology by parallel plate rheometer, density, melt flow index in order to understand the influence of each plasticizer on the material processing Some characterizations in the final product as thermal stability through TGA, Metrastat, optical and mechanical properties such as hardness Shore A, tensile strength, abrasion resistance, resilience, aging in UV chamber as well as exudation tests. The results indicate different behaviors of PVC depending on the chemical nature of the plasticizer used. Results indicate that the DIMIT plasticizer had good thermal stability, but the color and processability results were unsatisfactory when compared to the DOP. In the other hand, the OSE and DOA presented good results for the evaluated properties. It can be concluded that among the plasticizers analyzed it wasn´t possible to determine the best for direct DOP replacement considering the entire range of flexible PVC products. However, this work contributes to the evaluation and selection of the best plasticizer based on the requirements of each application.
|
2 |
Compósitos de PVC reforçados com fibra de vidro: uso de técnicas de processamento convencionais da indústria brasileira. / Glass fiber reinforced PVC composites: use of conventional processing techniques currently employed in the Brazilian industry.Murilo de Barros Feltran 15 February 2008 (has links)
Este trabalho apresenta o estudo da incorporação de fibra de vidro curta em composto rígido de poli(cloreto de vinila) - PVC - por meio de equipamentos e técnicas de processamento convencionais da indústria brasileira. Foram avaliadas as influências de: a) tamanho de fibra de vidro (tipo E), b) dosagem de fibra de vidro, c) dosagem de dióxido de titânio (TiO2) e d) a temperatura de processamento nas propriedades físicas, térmicas, mecânicas e na adesão entre matriz polimérica e fibra de vidro (analisada por Microscopia Eletrônica de Varredura). O custo-benefício dos compósitos foi calculado por meio de Índices de Mérito para os modos de carregamento mecânico encontrados nos tubos pressurizados para água fria (Cilindro com Pressão Interna) e perfis rígidos utilizados em construção civil (Barra em Flexão), dado o grande uso de PVC nestas aplicações. Entre os resultados obtidos, destaca-se o aumento de 45% no módulo de elasticidade para os compósitos com 20% de fibra de vidro moída que, para algumas aplicações, pode apresentar uma relação custo-benefício bastante favorável. / This work presents the impact of the short glass fiber incorporation in rigid PVC compound through conventional processing techniques currently employed in the Brazilian industry. It were studied the influences of a) glass fiber geometry (E type), b) glass fiber content, c) titanium dioxide content and d) processing temperature in the physical, mechanical and thermal properties. The adhesion conditions between polymeric matrix and glass fiber was analyzed by scanning electron microscopy (SEM). Cost-benefit relation of composites was evaluated using materials index technique for mechanical conditions found in pressurized water pipes (cylinder with internal pressure) and in building construction profiles (beam loaded in bending). The results attained suggested that, in some cases, the mechanical properties enhancement (such as the increase of 45% in the modulus of elasticity for composites containing 20% of glass fiber) and the processing techniques required to produce it can present an interesting cost-benefit relation.
|
3 |
Compósitos de PVC reforçados com fibra de vidro: uso de técnicas de processamento convencionais da indústria brasileira. / Glass fiber reinforced PVC composites: use of conventional processing techniques currently employed in the Brazilian industry.Feltran, Murilo de Barros 15 February 2008 (has links)
Este trabalho apresenta o estudo da incorporação de fibra de vidro curta em composto rígido de poli(cloreto de vinila) - PVC - por meio de equipamentos e técnicas de processamento convencionais da indústria brasileira. Foram avaliadas as influências de: a) tamanho de fibra de vidro (tipo E), b) dosagem de fibra de vidro, c) dosagem de dióxido de titânio (TiO2) e d) a temperatura de processamento nas propriedades físicas, térmicas, mecânicas e na adesão entre matriz polimérica e fibra de vidro (analisada por Microscopia Eletrônica de Varredura). O custo-benefício dos compósitos foi calculado por meio de Índices de Mérito para os modos de carregamento mecânico encontrados nos tubos pressurizados para água fria (Cilindro com Pressão Interna) e perfis rígidos utilizados em construção civil (Barra em Flexão), dado o grande uso de PVC nestas aplicações. Entre os resultados obtidos, destaca-se o aumento de 45% no módulo de elasticidade para os compósitos com 20% de fibra de vidro moída que, para algumas aplicações, pode apresentar uma relação custo-benefício bastante favorável. / This work presents the impact of the short glass fiber incorporation in rigid PVC compound through conventional processing techniques currently employed in the Brazilian industry. It were studied the influences of a) glass fiber geometry (E type), b) glass fiber content, c) titanium dioxide content and d) processing temperature in the physical, mechanical and thermal properties. The adhesion conditions between polymeric matrix and glass fiber was analyzed by scanning electron microscopy (SEM). Cost-benefit relation of composites was evaluated using materials index technique for mechanical conditions found in pressurized water pipes (cylinder with internal pressure) and in building construction profiles (beam loaded in bending). The results attained suggested that, in some cases, the mechanical properties enhancement (such as the increase of 45% in the modulus of elasticity for composites containing 20% of glass fiber) and the processing techniques required to produce it can present an interesting cost-benefit relation.
|
4 |
Influência dos plastificantes alternativos ao dioctil ftalato nas propriedades de compostos de poli (cloreto de vinila)Mattana, Mônica January 2017 (has links)
O poli(cloreto de vinila) - PVC é considerado um polímero muito versátil devido à possibilidade deste ser formulado mediante a incorporação de aditivos, alterando suas características originais. Plastificantes a base de ftalatos, como o di(2-etilhexil) ftalato (DOP) são os mais utilizados, porém, existem regulamentações que estão restringindo a sua utilização, intensificando-se os estudos com possíveis alternativos. Desta forma, este trabalho visa avaliar a influência de plastificantes de diferentes naturezas nas propriedades físicas, mecânicas, térmicas e reológicas do PVC plastificado. Para formulação dos compostos foi utilizado a resina Norvic SP1000 produzida via suspensão, com VK65 e portanto, propícia para aplicações de materiais flexíveis, além disso, para cada composto utilizou-se uma dosagem de 60 pcr de sete diferentes plastificantes: DOP, considerado como referência para comparação dos resultados, diisononil ciclohexano (DINCH), di(2-etilhexil) ciclohexanoato (DOCH), di(2-etilhexil) adipato (DOA), di(2-etilhexil) tereftalato (DOTP), óleo de soja epoxidado (OSE) e plastificante de óleos vegetais (DIMIT) Neste estudo foram efetuadas avaliações nos compostos como, gelificação e fusão, reologia via reômetro de placas paralelas, densidade, índice de fluidez entre outras para compreender a influência de cada plastificante no processamento do composto e várias caracterizações no produto final como estabilidade térmica dos compostos via TGA, Metrastat, propriedades óticas, propriedades mecânicas como dureza Shore A, tração, resistência a abrasão, resiliência, envelhecimento em câmara UV assim como ensaios de exsudação dos plastificantes. Os resultados indicam comportamentos distintos do PVC em função da natureza química do plastificante utilizado. O plastificante DIMIT possui boa estabilidade térmica, porém os resultados de cor e parâmetros de processamento foram insatisfatórios quando comparados ao DOP, já os plastificantes OSE e DOA apresentaram bons resultados para as propriedades avaliadas. Conclui-se que dentre os plastificantes analisados não foi possível determinar qual seria o melhor para substituição direta do DOP considerando toda a gama de produtos flexíveis de PVC, contudo esse trabalho colabora para a avaliação e seleção do melhor plastificante com base nos requisitos de cada aplicação do produto. / The poly (vinyl chloride) - PVC is a very versatile polymer due to the possibility of being formulated by incorporating additives, which can change the resin characteristics. Plasticizers composed of phthalates, such as di(2-ethylhexyl) phthalate (DOP), are the most used, however, there are regulations restricting the use of this kind of plasticizers, intensifying studies with possible replacement alternatives. In this way, the objective of this work is to evaluate the influence of plasticizers from different sources in PVC, mainly physical, mechanical thermal stability, and rheological properties in the plasticized PVC. In the formulation of the compounds it was used the resin Norvic SP1000, product with VK65 and produced by suspension, suitable for flexible materials applications. In addition, it was used 60 phr of seven different plasticizers for each compound: DOP, considered as reference for all results, cyclohexane diisononyl (DINCH), di(2-ethylhexyl) cyclohexanoate (DOCH), di(2-ethylhexyl) adipate (DOA), di(2-ethylhexyl) terephthalate (DOTP), epoxidized soybean oil (OSE) and plasticizer produced from vegetable oils (DIMIT). In this study, the compounds were evaluated with many characterization analyzes, such as gelling and melting point in a torque rheometer, rheology by parallel plate rheometer, density, melt flow index in order to understand the influence of each plasticizer on the material processing Some characterizations in the final product as thermal stability through TGA, Metrastat, optical and mechanical properties such as hardness Shore A, tensile strength, abrasion resistance, resilience, aging in UV chamber as well as exudation tests. The results indicate different behaviors of PVC depending on the chemical nature of the plasticizer used. Results indicate that the DIMIT plasticizer had good thermal stability, but the color and processability results were unsatisfactory when compared to the DOP. In the other hand, the OSE and DOA presented good results for the evaluated properties. It can be concluded that among the plasticizers analyzed it wasn´t possible to determine the best for direct DOP replacement considering the entire range of flexible PVC products. However, this work contributes to the evaluation and selection of the best plasticizer based on the requirements of each application.
|
5 |
Influência dos plastificantes alternativos ao dioctil ftalato nas propriedades de compostos de poli (cloreto de vinila)Mattana, Mônica January 2017 (has links)
O poli(cloreto de vinila) - PVC é considerado um polímero muito versátil devido à possibilidade deste ser formulado mediante a incorporação de aditivos, alterando suas características originais. Plastificantes a base de ftalatos, como o di(2-etilhexil) ftalato (DOP) são os mais utilizados, porém, existem regulamentações que estão restringindo a sua utilização, intensificando-se os estudos com possíveis alternativos. Desta forma, este trabalho visa avaliar a influência de plastificantes de diferentes naturezas nas propriedades físicas, mecânicas, térmicas e reológicas do PVC plastificado. Para formulação dos compostos foi utilizado a resina Norvic SP1000 produzida via suspensão, com VK65 e portanto, propícia para aplicações de materiais flexíveis, além disso, para cada composto utilizou-se uma dosagem de 60 pcr de sete diferentes plastificantes: DOP, considerado como referência para comparação dos resultados, diisononil ciclohexano (DINCH), di(2-etilhexil) ciclohexanoato (DOCH), di(2-etilhexil) adipato (DOA), di(2-etilhexil) tereftalato (DOTP), óleo de soja epoxidado (OSE) e plastificante de óleos vegetais (DIMIT) Neste estudo foram efetuadas avaliações nos compostos como, gelificação e fusão, reologia via reômetro de placas paralelas, densidade, índice de fluidez entre outras para compreender a influência de cada plastificante no processamento do composto e várias caracterizações no produto final como estabilidade térmica dos compostos via TGA, Metrastat, propriedades óticas, propriedades mecânicas como dureza Shore A, tração, resistência a abrasão, resiliência, envelhecimento em câmara UV assim como ensaios de exsudação dos plastificantes. Os resultados indicam comportamentos distintos do PVC em função da natureza química do plastificante utilizado. O plastificante DIMIT possui boa estabilidade térmica, porém os resultados de cor e parâmetros de processamento foram insatisfatórios quando comparados ao DOP, já os plastificantes OSE e DOA apresentaram bons resultados para as propriedades avaliadas. Conclui-se que dentre os plastificantes analisados não foi possível determinar qual seria o melhor para substituição direta do DOP considerando toda a gama de produtos flexíveis de PVC, contudo esse trabalho colabora para a avaliação e seleção do melhor plastificante com base nos requisitos de cada aplicação do produto. / The poly (vinyl chloride) - PVC is a very versatile polymer due to the possibility of being formulated by incorporating additives, which can change the resin characteristics. Plasticizers composed of phthalates, such as di(2-ethylhexyl) phthalate (DOP), are the most used, however, there are regulations restricting the use of this kind of plasticizers, intensifying studies with possible replacement alternatives. In this way, the objective of this work is to evaluate the influence of plasticizers from different sources in PVC, mainly physical, mechanical thermal stability, and rheological properties in the plasticized PVC. In the formulation of the compounds it was used the resin Norvic SP1000, product with VK65 and produced by suspension, suitable for flexible materials applications. In addition, it was used 60 phr of seven different plasticizers for each compound: DOP, considered as reference for all results, cyclohexane diisononyl (DINCH), di(2-ethylhexyl) cyclohexanoate (DOCH), di(2-ethylhexyl) adipate (DOA), di(2-ethylhexyl) terephthalate (DOTP), epoxidized soybean oil (OSE) and plasticizer produced from vegetable oils (DIMIT). In this study, the compounds were evaluated with many characterization analyzes, such as gelling and melting point in a torque rheometer, rheology by parallel plate rheometer, density, melt flow index in order to understand the influence of each plasticizer on the material processing Some characterizations in the final product as thermal stability through TGA, Metrastat, optical and mechanical properties such as hardness Shore A, tensile strength, abrasion resistance, resilience, aging in UV chamber as well as exudation tests. The results indicate different behaviors of PVC depending on the chemical nature of the plasticizer used. Results indicate that the DIMIT plasticizer had good thermal stability, but the color and processability results were unsatisfactory when compared to the DOP. In the other hand, the OSE and DOA presented good results for the evaluated properties. It can be concluded that among the plasticizers analyzed it wasn´t possible to determine the best for direct DOP replacement considering the entire range of flexible PVC products. However, this work contributes to the evaluation and selection of the best plasticizer based on the requirements of each application.
|
6 |
Modelling and optimisation of flexible PVC compound formulation for mine cablesFechter, Reinhard Heinrich January 2017 (has links)
The thermal stability, fire retardancy and basic mechanical properties, as a function of the mass fractions of the poly(vinyl chloride) (PVC) compound ingredients, can be modelled using 2nd order Scheffé polynomials. The empirical models for each response variable can be determined using statistical experimental design. The particular models for each response variable, which are selected for predictive ability using k-fold cross validation, can be interpreted using statistical analysis of the model terms. The statistical analysis of the model terms can reveal the synergistic or antagonistic interactions between ingredients, some of which have not been reported in literature. The interaction terms in the models also mean that the effect of a certain ingredient is dependent on the mass fractions of the other ingredients. Sensitivity analysis can be used to examine the overall effect of a change in a particular formulation on the response variables. The empirical models can be used to minimise the cost of the PVC compound by varying the formulation. The optimum formulation is a function of the costs of the various ingredients and the limits which are placed on the response variables. To analyse the system as a whole, parametric analysis can be used. The number of different parametric analyses which can be done is very large and depends on the specific questions which need to be answered. Parametric analysis can be used to gain insight into the complex behaviour of the system with changing requirements, as a decision making tool in a commercial environment or to determine the completeness of the different measuring techniques used to describe the thermal stability and fire retardancy of the PVC compound. Statistical experimental design allows for the above methods to be used which leads to significant time and labour savings over attempting to reach the same conclusions using the traditional one-factor-at-a-time experiments with changes in the phr of an ingredient. It is recommended that the data generated for this investigation is analysed in more detail using the methods outlined for this investigation. This can be facilitated by making the analysis of the data (and therefore the data itself) more accessible through a usable interface. The data set itself can also be expanded to include new ingredients requiring very few additional experiments. If a PVC compound that contains none of the ingredients that were used in this investigation is of interest a new separate data set needs to be generated. This can be done by following the same procedure used in this investigation. In fact the method that is used in this investigation can be generalised to optimise the proportions of the ingredients of any mixture. / Dissertation (MEng)--University of Pretoria, 2017. / Chemical Engineering / MEng / Unrestricted
|
7 |
PROCESSING AND KINETIC STUDIES OF THE REACTIVE BLENDS OF POLY(VINYL CHLORIDE) AND THERMOPLASTIC POLYURETHANESBaena, Johanna January 2006 (has links)
No description available.
|
8 |
Glucose Levulinates as Bio-plasticizers / Glukos levulinater som biobaserade mjukningsmedelXuan, Wenxiang January 2017 (has links)
Glucose, as the most plentiful sugar in nature, is a renewable resource and possesses excellent record in health safety. Levulinic acid is a platform chemical which plays an important role in biomass transformation and reactive intermediates. Both glucose and levulinic acid can be produced by biomass conversion with green processing techno logies. Due to the rising needs for bio-based, eco-friendly and non-toxic plasticizers, glucose levulinates as bio plasticizers were synthesized from glucose and levulinic acid, by utilizing microwave radiation or conventional condensation reaction (direct-heating method ). Acid number for the reaction liquor was measured by acid-base titration to follow the decrease of acid groups due to the reaction and the trend in the acid number within reaction time displayed the process of esterification and possible sensitivity of the reaction rate to reaction scale. It showed that microwave radiation had superior ability in enhancing reaction speed but it was also more sensitive to reaction scale and generated more diverse prod ucts than the direct-heating method. Besides, the process of reaction and formation of ester bonds was followed and confirmed by FT IR. The achieved levulinate products were extracted by 2-pro panol and ethyl acetate. The practices showed several serio us problems in 2-propanol extraction, including high dosage required for NaCl and solvent and difficulties in purification. The ethyl acetate proved to be a suitable solvent for this study and the extrac ted product s from the Con-24hrs and Micro-3/4/5/6/7hrs were characterized by 1H NMR, 13C N :tvlR. and LDI-MS. The results from spectrum suggested the presence of GL,. and G J .'l. type of levulinates. That means the glucose levulinates were successfully synthesized although the dehydration side reaction of glucose was inevitable leading to the generation of glucosidic bonds. In addition, BG (mixture of glucose and glycosidic levulinates) was evaluated by so lution casting of starch and PVC. In order to minimize the microbial contaminations in solution casting of starch, a modified method was raised and applied. The results showed that 40% BG had goo d miscibility with starch and the conclusion was further proved by DSC measurements, while the BG performed poor miscibility with PVC.
|
9 |
Fatigue of Polymers in the Roller Head Raceway of Extracorporeal CircuitsBednarski Spiwak, Allison Joan 05 December 2008 (has links)
No description available.
|
10 |
The Effects of Molecular Structure and Design on the Plasticizer Performance Through Coarse-Grained Molecular SimulationPanchal, Kushal January 2018 (has links)
Plasticizers are a commonly used additive used in the polymer industry to make the plastic more pliable by reducing the glass transition temperature, Tg and Young's modulus, Y. As the plasticizer aids in polymer process-ability and making it suitable for applications from industrial cables to sensitive medical equipment, the mechanism of plasticization is not fully understood. There are three theories used to explain plasticization: lubricity theory, gel theory, and free volume theory. The latter is a fundamental concept of polymer science that is used to calculate many polymer properties, but they all do not give a clear picture on plasticization. With molecular dynamics (MD) simulation, a coarse-grained (CG) model - which consist of a simple bead-spring model that generalizes particles as a bead and connects them via a finite spring – is used to explore the impact of plasticizer size throughout the polymer system. The interaction characteristics of the plasticizer is explored by representing the plasticizer molecules as a single bead of varying size. This gives better control on the variability of the mixture and pinpoint the significant contributions to plasticization. A path to understanding the the mechanism of plasticization will give insight in glass formation, and can later be used to find an optimal plasticizer architecture to minimize the migration of the additive by tuning the compatibility. Current results show a decoupling between the Tg and Y of the polymer-additive system. The overall understanding of finite-size effects shows: as additive of increasing size is added, the polymer free volume increases which in-turn would decrease the Y, but Tg is shown to increase because the polymer and additive are not as mobile to reduce caging effect of monomeric units. / Thesis / Master of Applied Science (MASc)
|
Page generated in 0.2752 seconds