No description available.

Organic electronics is the study of organic materials with electronic functionality and the applications of such materials. In the 1970s, the discovery that polymers can be made electrically conductive led to an explosion within this field which has continued to grow year by year. One of the attractive features of organic electronic materials is their inherent mechanical flexibility, which has led to the development of numerous flexible electronics technologies such as organic light emitting diodes and solar cells on flexible substrates. The possibility to produce electronics on flexible substrates like plastic or paper has also had a large impact on the field of printed, electronics where inks with electronic functionality are used for large area fabrication of electronic devices using classical printing methods, such as screen printing, inkjet printing and flexography. Recently, there has been a growing interest in the use of cellulose in organic and printed electronics, not only as a paper substrate but also as a component in composite materials where the cellulose provides mechanical strength and favorable 3D-microstructures. Nanofibrillated cellulose is composed of cellulose fibers with high aspect-ratio and diameters in the nanometer range. Due to its remarkable mechanical strength, large area-to-volume ratio, optical transparency and solution processability it has been widely used as a scaffold or binder for electronically active materials in applications such as batteries, supercapacitors and optoelectronics. The focus of this thesis is on flexible devices based on conductive polymers and can be divided into two parts: (1) Composite materials of nanofibrillated cellulose and the conductive polymer PEDOT:PSS and (2) patterning of vapor phase polymerized conductive polymers. In the first part, it is demonstrated how the combination of cellulose and conductive polymers can be used to make electronic materials of various form factors and functionality. Thick, freestanding and flexible “papers” are used to realize electrochemical devices such as transistors and supercapacitors while lightweight, porous and elastic aerogels are used for sensor applications. The second focus of the thesis is on a novel method of patterning conductive polymers produced by vapor phase polymerization using UV-light. This method is used to realize flexible electrochromic smart windows with high-resolution images and tunable optical contrast.

Radio frequency identification (RFID) and sensing are two key technologies enabling the Internet of Things (IoT). Development of RFID tags augmented with sensing capabilities (RFID sensor tags) would allow a variety of new applications, leading to a new paradigm of the IoT. Chipless RFID sensor technology offers a low-cost solution by eliminating the need of an integrated circuit (IC) chip, and is hence highly desired for many applications. On the other hand, printing technologies have revolutionized the world of electronics, enabling cost-effective manufacturing of large-area and flexible electronics. By means of printing technologies, chipless RFID sensor tags could be made flexible and lightweight at a very low cost, lending themselves to the realization of ubiquitous intelligence in the IoT era. This thesis investigated three construction methods of printable chipless RFID humidity sensor tags, with focus on the incorporation of the sensing function. In the first method, wireless sensing based on backscatter modulation was separately realized by loading an antenna with a humidity-sensing resistor. An RFID sensor tag could then be constructed by combining the wireless sensor with a chipless RFID tag. In the second method, a chipless RFID sensor tag was built up by introducing a delay line between the antenna and the resistor. Based on time-domain reflectometry (TDR), the tag encoded ID in the delay time between its structural-mode and antenna-mode scattering pulse, and performed the sensing function by modulating the amplitude of the antenna-mode pulse. In both of the above methods, a resistive-type humidity-sensing material was required. Multi-walled carbon nanotubes (MWCNTs) presented themselves as promising candidate due to their outstanding electrical, structural and mechanical properties. MWCNTs functionalized (f-MWCNTs) by acid treatment demonstrated high sensitivity and fast response to relative humidity (RH), owing to the presence of carboxylic acid groups. The f-MWCNTs also exhibited superior mechanical flexibility, as their resistance and sensitivity remained almost stable under either tensile or compressive stress. Moreover, an inkjet printing process was developed for the f-MWCNTs starting from ink formulation to device fabrication. By applying the f-MWCNTs, a flexible humidity sensor based on backscatter modulation was thereby presented. The operating frequency range of the sensor was significantly enhanced by adjusting the parasitic capacitance in the f-MWCNTs resistor. A fully-printed time-coded chipless RFID humidity sensor tag was also demonstrated. In addition, a multi-parameter sensor based on TDR was proposed.The sensor concept was verified by theoretical analysis and circuit simulation. In the third method, frequency-spectrum signature was utilized considering its advantages such as coding capacity, miniaturization, and immunity to noise. As signal collision problem is inherently challenging in chipless RFID sensor systems, short-range identification and sensing applications are believed to embody the core values of the chipless RFID sensor technology. Therefore a chipless RFID humidity sensor tag based on near-field inductive coupling was proposed. The tag was composed of two planar inductor-capacitor (LC) resonators, one for identification, and the other one for sensing. Moreover, paper was proposed to serve as humidity-sensing substrate for the sensor resonator on accounts of its porous and absorptive features. Both inkjet paper and ordinary packaging paper were studied. A commercial UV-coated packaging paper was proven to be a viable and more robust alternative to expensive inkjet paper as substrate for inkjet-printed metal conductors. The LC resonators printed on paper substrates showed excellent sensitivity and reasonable response time to humidity in terms of resonant frequency. Particularly, the resonator printed on the UV-coated packaging paper exhibited the largest sensitivity from 20% to 70% RH, demonstrating the possibilities of directly printing the sensor tag on traditional packages to realize intelligent packaging at an ultra-low cost. / <p>QC 20150326</p>

This thesis presents the implementation of some of the basic concepts of digital logic design in a fun and creative way with the help of paper electronics. This involves circuit building on paper using conductive tape or conductive ink and circuit components as electronics craft materials. Paper electronics toolkit called circuit sticker microcontroller which is deployed by a company named Chibitronics and AT89C51 microcontroller were used for the computational functioning of the circuits built on paper. This can be used to teach the fundamentals of digital logic design to the students in their early stage of studies in an attractive way and can help them them gain a better understanding. This thesis can also be helpful in grabbing the attention of high school students and motivate them towards choosing the engineering discipline for their higher studies.

Traditional fabrication methods used to manufacture biosensors for physiological, therapeutics, or health monitoring purposes are complex and rely on costly materials, which has hindered their adoption as single-use medical devices. The development of a new kind of wearable and implantable electronics relying on inexpensive materials for their manufacturing will pave the way towards the ubiquitous adoption of sticker-like health tracking devices.<div>One of growing and most promising applications for biosensors is the continuous health monitoring using mechanically soft, stretchable sensors. While these healthcare devices showed an excellent compatibility with human tissues, they still need highly trained personnel to perform multi-step, prolonged fabrication for several functioning layers of the device. In this dissertation, I propose low-cost, scalable, simple, and rapid manufacturing techniques to fabricate multifunctional epidermal and implantable sensors to monitor a range of biosignals including heart, muscle, or eye activity to characterizing of biofuids such as sweat. I have also used these devices as an implant to provide heat therapy for muscle regeneration and optical stimulation of neurons using optogenetics. These devices have also combined with those of triboelectric<br>nanogenerators to realize self-powered sensors for monitoring imperceptible mechanical biosignals such as respiratory and pulse rate.</div><div>Food health and safety has also emerged as another important frontier to develop biosensors and improve the human health and quality of life. The recent progresses on detecting microbial activity inside foods or their packages rely on development of highly functional materials. The existing materials for fabrication of food sensors, however,<br>are often costly and toxic for human health or the environment. In this dissertation, I proposed biocompatible food sensors using protein/PCL microfibers to reinforce the protein microfibrous structure in humid conditions and exploit their excellent hygroscopic properties to sense biogenic gas, as an indicator for early detection of food spoilage. Finally, my battery-free food sensors are capable of monitoring food safety with no need of extra measurement devices. Collectively, this dissertation proposes cost-effective solutions to solve human health issues, enabled by developing low-cost, functional materials and exploiting simple fabrication techniques.<br></div>