Thesis(M.S.)--Auburn University, 2005. / Abstract. Vita. Includes bibliographic references (p.97-102).

Mémoire (M.Ress.Renouv.)--Université du Québec à Chicoutimi, 1999. / Document électronique également accessible en format PDF. CaQCU

The purpose of this thesis is to explore the creative process behind Southland Paper Mills, the South's first newsprint factory. The thesis describes the conditions leading to the need for southern newsprint. It then chronicles, through the use of company records, the difficult challenges southern newsprint pioneers faced. The thesis follows the company history from the gem of an idea during the mid 1930's through the first decade of the Southland's existence. The paper concludes with the formative years of the company in the 1940's.

No description available.

The objective of this investigation was to utilise water pinch analysis as a tool for the optimisation of fresh water use in an integrated pulp and paper mill. The investigation was carried out at Mondi Paper in Merebank, south of Durban. The pulp and paper manufacturing process is a large consumer of fresh water and minimising the amount of fresh water used in the processes is beneficial from both a cost and environmental point of view. There are examples of mills which have "closed" their water systems to the extent that fresh water make up is minimal and most of the water is recycled and reused in a closed loop. These examples provide guidance on the basis of proven methods for reducing water consumption in the pulp and paper industry and can be used as a reference for mills wishing to reduce water consumption by making use of tried and tested methods. This investigation sought to provide an alternative method to identifying potential savings in fresh water consumption by making use of water pinch analysis. This was done at Mondi Paper by analysing individual parts of the mill and then a larger section of the mill which included both pulp and paper production. Flow rates of water streams and fibre content in those streams were obtained from plant data, where available, and this data was used to produce.a mass balance using the Linnhoff-March software, Water Tracker. The balance produced using Water Tracker provided the missing flow and fibre content data and this data was used as the input for the Linnhoff-March software, Water Pinch , to perform the water pinch analysis. The results achieved when analysing the individual parts of the mill did not demonstrate potential for significant savings in fresh water consumption, however the analysis of the integrated section of the mill identified a potential reduction in fresh water. It was found that the application of a single contaminant analysis to the larger section of the mill identified a possible reduction in the freshwater requirement of 8.1% and a reduction in effluent generated of 5.4%. This is a savings of R1 548 593 per annum based on 2003 costs of fresh water and effluent disposal. This analysis was conducted using the most simplified representation possible to produce meaningful results in order to evaluate the effectiveness of water pinch analysis in optimising the fresh water consumption in an integrated pulp and paper mill. It is demonstrated that water pinch analysis is potentially a useful tool in determining the minimum fresh water requirement of a site. / Thesis (M.Sc.Eng.)-University of Natal, Durban, 2003.

The overall objective of the research conducted and described in this thesis was to develop an environmentally relevant bioassay to assess the effects of complex effluents on a sentinel fish species. A short-term fathead minnow (FHM) reproductive bioassay was utilized to assess the effects of industrial effluents on multiple levels of biological organization (sub-organismal to population endpoints). The FHM bioassay was tested in both lab and on-site investigations using an artificial stream system. The incorporation of trophic-transfer into the bioassay was also developed to quantify the importance of contaminated food as a source of exposure. This work was conducted in two key phases. Phase I focused on testing and developing the FHM bioassay, in the lab and on-site with pulp mill effluent (PME), to firstly document response patterns and, secondly, to conduct an investigation of cause study. Phase II focused on developing the trophic-transfer system to document responses to metal mine effluent (MME) in the lab and on-site in an artificial stream system. Development of the trophic-transfer system was also conducted during this phase to compare responses to standard water-only exposures. <p>In Phase I, exposure to PME in both the lab and field studies resulted in disruptions in egg production and spawning events. By focusing on identifying response patterns I was able to determine that the effects observed were indicative of an estrogenic response. I was also able to identify a process stream that was the potential cause of responses observed after exposure to final effluent. Isolation of this process stream will assist the mill in developing approaches for future mitigation. The results from this research will also provide additional data for the environmental effects monitoring (EEM) program for pulp and paper and investigation of cause studies on a national basis. <p> In Phase II, in both the field and laboratory investigations, significant decreases in reproductive output (egg production and spawning events) were observed in the water-only system exposures. Significant decreases in hatching success and increases in deformities were observed in the trophic-transfer system only, suggesting that the combination of both food and water was important in assessing the effects on the F1 generation. Overall, the responses in the trophic-transfer system were not comparable between the lab and field studies. In the lab study, significant decreases in reproductive output occurred, compared to the field study where significant increases in egg production and spawning events occurred. In addition, the effects on the F1 generation in the field study were not as severe as those observed in the lab investigation. It was concluded that the presence of reference water and the environment within the trophic-transfer system were responsible for this reduction in toxicity. <p> Phases I and II of this research have made significant contributions to artificial stream development within Canada for the assessment of industrial effluents and their effects on aquatic biota. The results from these studies have also demonstrated that environmentally relevant testing is essential if we are to accurately assess effects on aquatic biota. Future development and application of this bioassay should be towards developing a standardized approach for not only assessing the effects of industrial effluents in a comparative manner, but also in investigation of cause studies.

The overall objective of the research conducted and described in this thesis was to develop an environmentally relevant bioassay to assess the effects of complex effluents on a sentinel fish species. A short-term fathead minnow (FHM) reproductive bioassay was utilized to assess the effects of industrial effluents on multiple levels of biological organization (sub-organismal to population endpoints). The FHM bioassay was tested in both lab and on-site investigations using an artificial stream system. The incorporation of trophic-transfer into the bioassay was also developed to quantify the importance of contaminated food as a source of exposure. This work was conducted in two key phases. Phase I focused on testing and developing the FHM bioassay, in the lab and on-site with pulp mill effluent (PME), to firstly document response patterns and, secondly, to conduct an investigation of cause study. Phase II focused on developing the trophic-transfer system to document responses to metal mine effluent (MME) in the lab and on-site in an artificial stream system. Development of the trophic-transfer system was also conducted during this phase to compare responses to standard water-only exposures. <p>In Phase I, exposure to PME in both the lab and field studies resulted in disruptions in egg production and spawning events. By focusing on identifying response patterns I was able to determine that the effects observed were indicative of an estrogenic response. I was also able to identify a process stream that was the potential cause of responses observed after exposure to final effluent. Isolation of this process stream will assist the mill in developing approaches for future mitigation. The results from this research will also provide additional data for the environmental effects monitoring (EEM) program for pulp and paper and investigation of cause studies on a national basis. <p> In Phase II, in both the field and laboratory investigations, significant decreases in reproductive output (egg production and spawning events) were observed in the water-only system exposures. Significant decreases in hatching success and increases in deformities were observed in the trophic-transfer system only, suggesting that the combination of both food and water was important in assessing the effects on the F1 generation. Overall, the responses in the trophic-transfer system were not comparable between the lab and field studies. In the lab study, significant decreases in reproductive output occurred, compared to the field study where significant increases in egg production and spawning events occurred. In addition, the effects on the F1 generation in the field study were not as severe as those observed in the lab investigation. It was concluded that the presence of reference water and the environment within the trophic-transfer system were responsible for this reduction in toxicity. <p> Phases I and II of this research have made significant contributions to artificial stream development within Canada for the assessment of industrial effluents and their effects on aquatic biota. The results from these studies have also demonstrated that environmentally relevant testing is essential if we are to accurately assess effects on aquatic biota. Future development and application of this bioassay should be towards developing a standardized approach for not only assessing the effects of industrial effluents in a comparative manner, but also in investigation of cause studies.

No description available.

Thesis (Ph.D) -- McMaster University, 1997. / Includes bibliographical references. Also available via World Wide Web.

Dissertation (M.Sc. (Chemical engineering)) -- University of Pretoria, 2008. / Includes bibliographical references (p. 42-52)