Spelling suggestions: "subject:"photoelectrochemistry"" "subject:"fotoelectrochemistry""
1 |
Photo-electrochemical processes at the triple phase boundaryCollins, Andrew January 2012 (has links)
The main aim and ultimate final goal of the work carried out in this thesis is a drive towards a feasible system for light harvesting, which is in short, using the Sun’s energy to create electricity or a fuel for our energy requirements here on Earth. This work will see an approach using the triple phase boundary afforded by a microdroplet array. Although light harvesting is an ambition which has seen decades of work and uncountable man-hours, approaching it from the angle of utilizing the triple phase boundary between two immiscible liquids and a solid electrode is a new, and novel concept. Before any attempts towards a light harvesting technique can be made, we will need to have characterized and fully understood the mechanisms and nuances, both for dark and light processes, that are observed at the triple phase boundary. This initial process will start by selection of a suitable redox molecule, and exploring its reactivity in microdroplets under dark conditions. Once this has been achieved, an attempt can be made to use this knowledge, and implement it towards light harvesting. This will eventually include an attempt to couple photo-excited states with other molecules, this will be an important step if energy is ever able to be stored from such a system. This early phase will also see the need to employ many other techniques other than electrochemistry in an effort to aid in the understanding and characterization of the triple phase boundary at microdroplets. This will include travelling to other laboratories in search of specialized scientific skills and apparatus, such as electron paramagnetic resonance, or photocurrent spectroscopy. It will also see the need to build new equipment needed to conduct tests such as surface tension visualization, or new electrochemical cells for photocurrent measurement. In summary, this report will see initial characterization of the processes, both light and dark, that occur within the triple phase boundary of a microdroplet for a given redox molecule dissolved within. Early attempts at coupling excited states with other molecules are also explored. Serendipity has always played a part in scientific discovery and the work outlined in this report was no different. The choice of oil used for the organic phase microdroplet deposits yielded some interesting and unexpected results, and has been implicated as one of the key aspects of the photoreactions that have been explored.
|
2 |
Mixed metal oxide semiconductors and electrocatalyst materials for solar energy conversionBerglund, Sean Patrick 21 January 2014 (has links)
The sun is a vast source of renewable energy, which can potentially be used to satisfy the world's increasing energy demand. Yet many material challenges need to be overcome before solar energy conversion can be implemented on a larger scale. This dissertation focuses on materials used for solar energy conversion through photo-electrochemical (PEC) processes. It discusses methods for improving PEC materials, namely mixed metal oxide semiconductors, by nanostructuring, incorporation of additional elements, and application surface electrocatalysts. In this dissertation several material synthesis techniques are detailed. A high vacuum synthesis process known as reactive ballistic deposition (RBD) is used to synthesize nanostructured bismuth vanadate (BiVO₄), which is studied for PEC water oxidation. Additionally, ballistic deposition (BD) is used to incorporate Mo and W into nanostructured BiVO₄ to improve the PEC activity. An array dispenser and scanner system is used to incorporate metals into copper oxide (CuO) and copper bismuth oxide (CuBi₂O₄) and over 3,000 unique material compositions are tested for cathodic photoactivity. The system is also used to test 35 elements as single component metal oxides, mixed metal oxides, and dopants for titanium dioxide (TiO₂) for use in dye-sensitized solar cells (DSCs). Lastly, RBD is used to deposit tungsten semicarbide (W₂C) onto p-type silicon (p-type) substrates as an electrocatalyst for PEC proton reduction. In many cases, the synthesis techniques and new material combinations presented in this dissertation result in improved PEC performance. The materials are thoroughly assessed and characterized to gain insights into their nanostructure, chemical composition, light absorption, charge transport properties, catalytic activity, and stability. / text
|
3 |
Photo-dissociation de l'eau et photo-réduction du CO₂ assistées par co-catalyse moléculaire / Photo-electrochemical reduction of Water and Carbon Dioxide enhanced by molecular catalysisVillagra, Angel Eduardo 28 September 2016 (has links)
L’objectif principal de ce travail de thèse était de mettre en évidence et de mesurer l’effet co-catalytique de complexes moléculaires organo-métalliques à base de métaux de transition adsorbés sur des semi-conducteurs dopés photo-actifs vis-à-vis des réactions de photo-dissociation de l’eau et de photo-réduction du dioxyde de carbone, en en vue d’applications dans des cellules photochimiques et photo-électrochimiques. Nous avons tout d’abord identifié et sélectionné les matériaux (deux semi-conducteurs photo-actifs et deux co-catalyseurs moléculaires électroactifs) les plus adaptés (les résultats sont présentés dans le chapitre I). Nous avons ensuite conçu, développé et mis au point un bâti expérimental permettant la détection et le dosage en continu des produits de réaction lors des réactions d’intérêt (les résultats sont présentés dans le chapitre II). La détection des produits de réaction se fait à l’aide d’un chromatographe en phase gazeuse couplé au réacteur. Nous avons ensuite élaboré/synthétisé et mesuré les propriétés intrinsèques des matériaux sélectionnés (les résultats sont présentés dans le chapitre III). Finalement, nous avons mis en évidence l’activité co-catalytique des complexes utilisés et mesuré un ensemble d’indicateurs de performance tels que les cinétiques de réaction et les fréquences de « turn-over » (les résultats sont présentés dans le chapitre IV). / The main objective of this research work was to put into evidence the co-catalytic effect of organo-metallic molecular complexes containing transition metals as reactive centers, adsorbed at the surface of doped semiconductors with photo-activity with regard to water photo-dissociation and carbon dioxide photo-reduction, in view of practical applications in photochemistry and photo-electrochemistry. First, appropriate materials (two photoactive semiconductors and two molecular co-catalysts) have been identified and selected (results are presented in chapter I). Then, we have designed, constructed and optimized a specific test bench that can be used for the continuous detection and titration of reaction products (results are presented in chapter II). Product analysis was achieved by coupling a gas-phase chromatograph to the photo-electrochemical reactor. Then, photoactive semiconductors and molecular co-catalysts have been elaborated/synthesized and their intrinsic properties have been measured (results are presented in chapter III). Finally, the co-catalytic activity of molecular complexes has been put into evidence and several performance indicators such as reaction kinetics and turn-over frequency have been measured (results are presented in chapter IV).
|
4 |
Aqueous dye sensitized solar cellsRisbridger, Thomas Arthur George January 2013 (has links)
Dye sensitized solar cells (DSSCs) have typically been produced using organic liquids such as acetonitrile as the electrolyte solvent. In real world situations water can permeate into the cell through sealing materials and is also likely to be introduced during the fabrication process. This is a problem as the introduction of water into cells optimized to use an organic solvent tends to be detrimental to cell performance. In this work DSSCs which are optimized to use water as the main electrolyte solvent are produced and characterized. Optimization of aqueous DSSCs resulted in cells with efficiencies up to 3.5% being produced. In terms of characterization, it is generally seen in this work that aqueous DSSCs produce a lower photocurrent but similar photovoltage compared to DSSCs made using acetonitrile and reasons for this are examined in detail. The decreased ability of the aqueous electrolyte to wet the nanoporous TiO2 compared to an acetonitrile electrolyte is found to be a key difficulty and several possible solutions to this problem are examined. By measuring the photocurrent output of aqueous cells as a function of xy position it can be seen that there is some dye dissolution near to the electrolyte filling holes. This is thought to be linked to pH and the effect of 4-tert-butylpyridine and may also decrease the photocurrent. It is found that there is little difference between the two types of cells in terms of the conduction band position and the reaction of electrons in the semiconductor with triiodide in the electrolyte, explaining the similarity in photovoltage. By altering the pH of the electrolyte in an aqueous cell it is found to be possible to change the TiO2 conduction band position in the DSSC. This has a significant effect on the open circuit voltage and short circuit current of the cell, though the pH range available is limited by the fact that dye desorbs at high pH values.
|
Page generated in 0.0642 seconds