The research outlined in this dissertation focuses on understanding the role of metal-sulfur interactions as applied to bioinorganic and organometallic systems. This metal-sulfur interaction is analyzed using both gas-phase photoelectron spectroscopy (PES) and density functional theory (DFT). Gas-phase photoelectron spectroscopy is the most direct probe of electronic structure and is used in these studies to probe the molecular orbital energy levels of these model compounds, giving rise to an understanding of the metal and sulfur orbital interactions and characters (i.e. is an orbital primarily metal or sulfur based). Using density functional theory, orbital energies, overlap, and characters can be calculated and complement the PES experiments allowing for a detailed understanding of the electronic structure. The first part of my dissertation explains the design and implementation of a dual source gas-phase ultraviolet/X-ray photoelectron spectrometer (UPS/XPS). This gas-phase UPS/XPS can be used to quantify the bonding/antibonding character of frontier molecular orbitals, with specific applications to metal-sulfur interactions, allowing for a thorough analysis of the metal-sulfur interaction. The second part of the dissertation explores using model complexes, of the type Cp₂V(dithiolate) (where Cp is cyclopentadienyl and dithiolate is 1,2-ethenedithiolate or 1,2-benzenedithiolate), along with PES and DFT calculations to investigate the role of the pyranopterindithiolate cofactor and the d¹ electron configuration in modulating the redox potential and electron transfer in the active sites of molybdenum enzymes. This study shows that the d¹ electronic configuration offers a low energy electron transfer pathway for the reoxidation of the active site molybdenum center. The third part of the dissertation explores the use of model compounds that specifically focus on iron-thiolate interactions in biological systems, and the effect of electronic energy matching and sterics on the oxidation potential of this interaction. This study has shown that the metal-sulfur interaction is sensitive to the orientation of the thiolate ligand, and that during oxidation an “electronic-buffering effect” makes assigning a formal oxidation state to the metal center almost meaningless. All of these studies illustrate how the thiolate ligand can modulate the electron density and oxidation potential of the metal-sulfur interaction and the implication of this interaction to biological electron transfer.

Molecular and cluster anions have been investigated using a newly built tandem time-of-flight mass spectrometer combined with photoelectron imaging system. Solvation particularly hydration is shown not only to stabilize metastable anions such as CO₂⁻ in their ground state and impede autodetachment but also to alter the dynamics in the excited states. For instance, the 355 nm photoelectron image of mass-selected CO₂⁻(H₂O)(m) evolves from anisotropic to isotropic as m increases indicating excited state decay via electron autodetachment. Dissociation channels open at m=2 at 266 nm, resulting in O−(H₂O)m-k and CO₂⁻(H₂O)(m-k) products, the later becoming dominant as m increases. The photoelectron imaging of (CS₂)₂⁻ has revealed the coexistence of four electronic isomers: CS₂⁻•CS₂ [C(s)(₂A′)] and three covalent C₂S₄⁻ [C₂ᵥ(²B₁), D(2h)(²B(3g)), and D(2d)( ²A₁)] structures. Water-mediated intermolecular interactions have been shown to facilitate the formation of the global minimum C₂ᵥ(²B₁) structure rather than the less stable local minima C(s)(₂A′) and D(2d)(²A₁) structures that are favored in the dry source condition. In the (CS2)(n)⁻, n ≥ 3 and (CS₂)₂⁻ (H₂O)(m), m > 0 clusters, the population of the C₂ᵥ(²B₁) structure diminishes drastically due to more favorable solvent interactions with the CS2 − monomercore. Photoexcitation of the (CS₂)₂⁻ also results in the formation of CS₂⁻ and C₂S₂⁻ at 532 nm, and C₂S₂⁻, CS₂⁻, CS₃⁻, S₂⁻, and S⁻ at 355 and 266 nm. The relative yields of C₂S₂⁻ is significantly higher when (CS₂)₂⁻ is formed under wet source condition suggesting C₂ᵥ(²B₁) structure as the origin of C₂S₂⁻. An abrupt decrease in the relative yield of C₂S₂⁻ is observed upon adding CS₂ or H₂O to (CS₂)₂⁻. The CS₂⁻ based clusters are the likely origin of the S− photoproduct, while CS₃⁻ is formed through the secondary S⁻+CS₂ reaction. Novel anions (CS₂O₂⁻ and CS₃O⁻) are observed in the CS₂+O₂+e⁻ reaction. The photoelectron imaging and photodissociation results of these and other anionic products are presented. In addition, CS₂⁻•O₂ ion-neutral complex is formed depending on the conditions in the ion source. Despite the positive electron affinity of O₂, no clear signature of O₂⁻•CS₂ ion-neutral complex is seen in the photoelectron image. CO₃⁻ ion is also formed abundantly as a result of CS₂+CO₂+O₂+e⁻ reaction.

No description available.

Molecular and cluster anions have been investigated using photoelectron velocity-map imaging spectroscopy to study the nature of electrons in radical species. We report a negative-ion photoelectron imaging study of benzonitrile and several of its hydrated, oxygenated, and homo-molecularly solvated cluster anions. The photodetachment transition from the unsolvated benzonitrile anion to the X̃¹A₁ state of the neutral peaks at 58 ± 5 meV. The electron affinity (EA) of the lowest excited electronic state of benzonitrile, ã³A₁, is determined as 3.41 ± 0.01 eV. The next excited state, the open-shell singlet ùA₁, is found about an electron-volt above the triplet, corresponding to a vertical detachment energy of 4.45 ± 0.01 eV. The step-wise and cumulative solvation energies of benzonitrile anions by several types of species were determined, including homo-molecular solvation by benzonitrile, hydration by 1–3 waters, oxygenation by 1–3 oxygen molecules, and mixed solvation by various combinations of O₂, H₂O, and benzonitrile. Ethylene has been shown to be a degradation product following the 1-e⁻ attachment to ethylene carbonate. As a solvent molecule for (O₂)^(□), our photoelectron imaging study shows a relatively small solvation energy of ≤0.24 eV for the expected 𝜋-𝜋 interaction in the ((O₂)^(□))(C₂H₄) cluster anion. The EA of the O₂(C₂H₄) cluster was measured at 0.69 ± 0.01 eV, while the 𝑋³A″ ← 𝑋²A″ photodetachment transition shows a 1400 ± 100 cm⁻¹ vibrational progression in the 1064 nm spectrum. Negative-ion photoelectron imaging was used to investigate the substituted carbene derivative of fluoroacetonitrile. We report a closed-shell singlet ground state for the cyanofluorocarbene, FCCN, with an adiabatic electron affinity EA = 2.081 ± 0.002 eV and a singlet-triplet gap of ΔEₛ₋ₜ = 0.42 ± 0.04 eV. The open-shell singlet ¹A″ state was also observed experimentally. We find that the experimentally measured ΔEₛ₋ₜ of FCCN agrees well with the general trend of similar carbenes. We report preliminary results on the photoelectron imaging of phenylcarbene, cyanophenylcarbene, and chlorophenylcarbene anions. Triplet phenylcarbene is observed to have an EA of ≤0.83 eV, considerably lower than the previously indirectly-determined value. Transitions to the singlet and triplet ground state of both cyanophenylcarbene and chlorophenylcarbene are observable, though unidentified bands make full assignment difficult. Cyanophenylcarbene is found to have a triplet ground-state, with a tentative EA of 2.04 eV. Chlorophenylcarbene is found to have a singlet ground-state. The phenyl-group is found to favor the singlet state slightly. The cyanofluoromethyl radical, FC(H)CN, was estimated to have an EA of 1.53 ± 0.08 eV, by a combination of experimental and theoretical results.. With similar methodology, we report the adiabatic electron affinity of the cyanobenzyl radical, EA(PhCHCN) = 1.90 ± 0.01 eV, and assign an upper limit of the EA for the chlorobenzyl radical, EA(PhCHCl) ≤ 1.12 eV. These values were used to estimate the C-H bond dissociation energy (BDE)s for these substituted methanes. Fluoroacetonitrile was found to have a BDE of D𝐻₁₉₈ = 90.7 ± 2.8 kcal mol^(□1). The C-H bond dissociation energies at the benzyl-α sites of the phenylmethanes are determined as 80.9 ± 2.3 kcal mol⁻¹ for benzyl nitrile and an upper limit of 84.2 kcal mol⁻¹ for benzyl chloride. These results are discussed in terms of substituent interactions in a simple MO framework and in relation to other similar molecules, including recently reported results for chloroacetonitrile. The 532 nm photoelectron spectrum of glyoxal provides the first direct spectroscopic determination of the adiabatic electron affinity, EA = 1.10(2) eV. This assignment is supported by a Franck-Condon simulation of the experimental spectrum that successfully reproduces the observed spectral features. The vertical detachment energy (VDE) of the glyoxal radical anion is determined as VDE = 1.30(4) eV. The EA of methylglyoxal is determined as ≤0.8 eV based on the signal-to-noise ratio of the 𝑋¹A′←𝑋²A″ transition, with a VDE = 1.28(4) eV. The EA of the a³A″ ← X²A″ and 𝐴¹A″ ← 𝑋²A″ transitions are determined as 3.28(3) eV and 3.614(5) eV respectively. The intrinsically short-lived ethylenedione molecule (OCCO) was observed and investigated using anion photoelectron spectroscopy. The adiabatic electron affinity of its ³Σg^(□) ground state is 1.936(8) eV. The vibrational progression with a 417(15) cm⁻¹ frequency observed within the triplet band corresponds to a trans-bending mode. Several dissociative singlet states are also observed, corresponding to two components of the ¹Δg state and the ¹Σg⁺ state. The experimental results are in agreement with the theory predictions and constitute the first spectroscopic observation and characterization of the elusive ethylenedione molecule. Two glyoxal derivatives related to the ethylenedione anion (OCCO⁻), ethynediolide (HOCCO⁻) and glyoxalide (OHCCO⁻), were studied. These anions provide access to the corresponding neutral reactive intermediates: the HOCCO and OHCCO radicals. In the HOCCO/OHCCO anion photoelectron spectrum, we identify several electronic states of this radical system and determine the adiabatic electron affinity of HOCCO as 1.763(6) eV. This result is compared to the corresponding 1.936(8) eV value for ethylenedione (OCCO). Initial attempts were made to detect and observe the dicyanoacetylene anion, NCCCCN⁻, by photoelectron imaging. While it is believed the experimental design path of H₂⁺ abstraction from fumaronitrile is sound, no spectral signature can be assigned to NCCCCN⁻. Calculations targeting the low-lying transitions from the anion indicate that the molecule should have a significantly positive electron affinity and at least the ground state should be accessible with the currently available laser sources. The cluster ion O₂(N₂O)⁻ of the same nominal mass as NCCCCN⁻ is identified as an interfering ion and ideas have been proposed for resolving this difficulty.

Organic aerosols are ubiquitous to the lower atmosphere and there is growing concern about their impact on climate and human health. These aerosols typically have multicomponent compositions that change over time in part due to oxidation by reactive trace gases, such as ozone. A current challenge to the atmospheric research community is to develop better methods of analysis of these particles. Photoelectron resonance capture ionization aerosol mass spectrometry (PERCI-AMS) is an online mass spectrometric method that has been applied to the analysis of organic aerosols. One of its key advantages is that it employs low energy (~ 0 eV) photoelectrons in the ion forming process, which has been shown to minimize fragmentation in the organic analytes, thus simplifying mass spectral interpretation. This dissertation focuses on the application of PERCI-AMS to the analysis of organic particles. Initial emphasis is placed on the heterogeneous reaction of gas phase ozone with liquid oleic acid particles. Products identified included carboxylic acids, aldehydes, and peroxides including alpha-acyloxyalkyl hydroperoxides polymers. The evidence of peroxidic products suggested the stabilization of carbonyl oxide intermediates (i.e. Criegee intermediates) that are formed during ozonolysis. Subsequent PERCI-AMS experiments investigated the reactivity of the stabilized Criegee intermediates. This included investigating the reaction of Criegee intermediates with unsaturated fatty acids and methyl esters. A novel ketone-forming reaction is described in these systems, suggesting the Criegee intermediates can react at a carbon-carbon double bond. Further PERCI-AMS experiments investigated the oxidative processing of particulate amines including octadecylamine and hexadecylamine. Ozonolysis of these amines resulted in strong NO2 - and NO3 - ion signals that increased with the ozone exposure and suggested a mechanism of progressive oxidation. Additionally, a strong ion signal was detected for NO3 -(HNO3), which is the ion core of the most important ion cluster series in the troposphere, NO3 -(HNO3)n(H2O)m. PERCI-AMS was applied to the analysis of ozonized mixed particles of amines with oleic acid or dioctyl sebacate. In the ozonolysis of the amines with oleic acid, products included imines and amides. The routes to the amides were shown to most likely arise from the reactivity of stabilized Criegee intermediates and/or secondary ozonides with the amines. There was also direct evidence of the formation of a surface barrier in the octadecylamine and oleic acid reaction system, which resulted in the retention of oleic acid at high ozone exposures. These experiments have fostered a better understanding of the analytical capacity of PERCI-AMS in assaying the reactivity of organic aerosols as well as giving a more accurate description of the heterogeneous chemistry of these challenging reaction systems. Suggestions for adaptations to PERCI-AMS and future experiments on

<p>Nanoporous dye-sensitized solar cells (DSSC) are promising devices for solar to electric energy conversion. In this thesis photoelectron spectroscopy (PES), x-ray absorption spectroscopy (XAS) and photovoltaic measurements are used for studies of the key interfaces in the DSSC. </p><p>Photovoltaic properties of new combinations of TiO₂/dye/hole-conductor heterojunctions were demonstrated and their interfacial structures were studied. Three different types of hole-conductor materials were investigated: Triarylamine derivatives, a conducting polymer and CuI. The difference in photocurrent and photovoltage properties of the heterojunction due to small changes in the hole-conductor material was followed. Also a series of dye molecules were used to measure the influence of the dye on the photovoltaic properties. Differences in both the energy-level matching and the geometric structure of the interfaces in the different heterojunctions were studied by PES. This combination of photovoltaic and PES measurements shows the possibility to link the interfacial electronic and molecular structure to the functional properties of the device. </p><p>Three effective dyes used in the DSSC, Ru(dcbpy)₂(NCS)₂, Ru(tcterpy)(NCS)₃ and an organic dye were studied in detail using PES and XAS and resonant core hole decay spectroscopy. The results gave information of the frontier electronic structure of the dyes and how the dyes are bonded to the TiO₂ surface. </p><p>Finally, the hole-conductor mechanism in a conducting polymer was investigated theoretically using semi-empirical and ab-initio methods. </p>

The photoelectron spectra of a series of ketone compounds have been investigated in the gas phase. Core ionization energies were measured to probe the effects of molecular size and connectivity number on core ionization energies. It was found that core ionization energies roughly decrease with increasing connectivity number as expected. However, subdividing into several categories based on the molecular type gives improved correlations. These results show both the effect of molecular size and that of bringing the polarizable group closer to the core ionized center. In some cases, compounds with the same connectivity number have different core ionization energies and, in others, compounds with different connectivity number have the same core ionization energies. These discrepancies indicate that the simple method for calculating connectivity numbers must be modified to reflect different molecular types. Other discrepancies indicate that this method does not correctly predict the effects of remote hydrogens or the effects of aromatic substituents, where conjugation may influence the relaxation energy. / Graduation date: 1995

Thesis (M.M.S.E.)--University of Delaware, 2006. / Principal faculty advisor: Robert L. Opila, Dept. of Materials Science. Includes bibliographical references.

Nanoporous dye-sensitized solar cells (DSSC) are promising devices for solar to electric energy conversion. In this thesis photoelectron spectroscopy (PES), x-ray absorption spectroscopy (XAS) and photovoltaic measurements are used for studies of the key interfaces in the DSSC. Photovoltaic properties of new combinations of TiO2/dye/hole-conductor heterojunctions were demonstrated and their interfacial structures were studied. Three different types of hole-conductor materials were investigated: Triarylamine derivatives, a conducting polymer and CuI. The difference in photocurrent and photovoltage properties of the heterojunction due to small changes in the hole-conductor material was followed. Also a series of dye molecules were used to measure the influence of the dye on the photovoltaic properties. Differences in both the energy-level matching and the geometric structure of the interfaces in the different heterojunctions were studied by PES. This combination of photovoltaic and PES measurements shows the possibility to link the interfacial electronic and molecular structure to the functional properties of the device. Three effective dyes used in the DSSC, Ru(dcbpy)2(NCS)2, Ru(tcterpy)(NCS)3 and an organic dye were studied in detail using PES and XAS and resonant core hole decay spectroscopy. The results gave information of the frontier electronic structure of the dyes and how the dyes are bonded to the TiO2 surface. Finally, the hole-conductor mechanism in a conducting polymer was investigated theoretically using semi-empirical and ab-initio methods.

Incorporation of nitrogen into ¢»-¢½ materials such as GaAsN and InGaAsN, have recently drawn much attention, due to the unique properties as well as potential device applications of such materials. The purpose of this thesis is to probe microscopic compositions and electronic structures in a series of N-based semiconductor compounds. For the material and electronic structure characterizations, X-ray photoelectron spectroscopy (XPS) with synchrotron radiation beam was adopted to analyze the sample quality under different growth and post-growth thermal annealing. Through detection of samples of InGaAsN in comparison with a series of samples of GaAsN, InAsN, InN, GaN, InGaAs and GaAs, the experimental result and analysis. Now X-ray photoelectron spectroscopy investigation on ¢»-¢½alloys containing a few percentage of nitrogen demonstrated the success of nitrogen incorporation. X-ray photoelectron spectroscopy investigation on InGaAsN films and curve fitting analysis, it can provide evidence of the existence of two principle N configurations, indicating the formation of N-In, N-Ga bonds. Through an estimation of the sample surface composition was made on the basis of the peak area: N-In/N-Ga larger than 3, it can provid direct evidence of the presence of preferential bonding of N to In. The incorporation of atomic nitrogen was added during the annealing. Right through X-ray photoelectron spectroscopy in annealed InGaAsN film can N-In and N-Ga bonds be observed to be increase, but N-In/N-Ga larger than 2, The bonds of atomic nitrogen is still N-Ga bonds.