Microcantilever arrays have been shown to be promising label-free nanomechanical sensing devices with high sensitivity. Two factors that affect the usefulness of microcantilevers in sensing scenarios are the sensitivity of the transduction method for measuring changes in microcantilever properties and the ability to create large compact arrays of microcantilevers. In this dissertation, we demonstrate that microcantilevers with an in-plane photonic transduction method are attractive because they maintain the sensitivity of the traditional laser beam reflection method while being scalable to simultaneous readout of large microcantilever arrays. First I demonstrate the integration of a compact waveguide splitter network with in-plane photonic microcantilevers which have amorphous silicon strip loading differential splitter and simultaneous microcantilever readout with an InGaAs line scan camera. A 16-microcantilever array is fabricated and measured. Use of a scaled differential signal yields reasonable correspondence of the signals from 7 surviving released microcantilevers in the array. The average sensitivity is 0.23 µm-1. To improve the sensitivity and consistency, and reduce fabrication difficulties, a new differential splitter design with 4 µm long double-step multimode rib waveguide is introduced. Furthermore, a modified fabrication process is employed to enhance the performance of the device. A new 16-microcanitiler array is designed and fabricated. The sensitivity of a measured 16-microcantilever array is improved to approximately 1 µm-1, which is comparable to the best reported for the laser reflection read out method. Moreover, most of the microcantilevers show excellent uniformity. To demonstrate large scale microcantilever arrays with simultaneous readout using the in-plane photonic transduction method, a 64-microcantilver array is designed, fabricated and measured. Measurement results show that excellent signal uniformiy is obtained for the scaled differential signal of 56 measured microcantilevers in a 64-array. The average sensitivity of the microcantilevers is 0.7 µm-1, and matches simulation results very well.

No description available.

In this dissertation, liquid crystal materials and devices are investigated in meeting the challenges for photonics and communications applications. The first part deals with polymer-stabilized liquid crystal (PSLC) materials and devices. Three polymer-stabilized liquid crystal systems are developed for optical communications. The second part reports the experimental investigation of a novel liquid-crystal-infiltrated photonic crystal fiber (PCF) and explores its applications in fiber-optic communications. The curing temperature is found to have significant effects on the PSLC performance. The electro-optic properties of nematic polymer network liquid crystal (PNLC) at different curing temperatures are investigated experimentally. At high curing temperature, a high contrast, low drive voltage, and small hysteresis PNLC is obtained as a result of the formed large LC micro-domains. With the help of curing temperature effect, it is able to develop PNLC based optical devices with highly desirable performances for optical communications. Such high performance is generally considered difficult to realize for a PNLC. In fact, the poor performance of PNLC, especially at long wavelengths, has hindered it from practical applications for optical communications for a long time. Therefore, the optimal curing temperature effect discovered in this thesis would enable PSLCs for practical industrial applications. Further more, high birefringence LCs play an important role for near infrared photonic devices. The isothiocyanato tolane liquid crystals exhibit a high birefringence and low viscosity. The high birefringence LC dramatically improves the PSLC contrast ratio while keeping a low drive voltage and fast response time. A free-space optical device by PNLC is experimentally demonstrated and its properties characterized. Most LC devices are polarization sensitive. To overcome this drawback, we have investigated the polymer-stabilized cholesteric LC (PSCLC). Combining the curing temperature effect and high birefringence LC, a polarization independent fiber-optical device is realized with over 30 dB attenuation, ~12 Vrms drive voltage and 11/28 milliseconds (rise/decay) response times. A polymer-stabilized twisted nematic LC (PS TNLC) is also proposed as a variable optical attenuator for optical communications. By using the polarization control system, the device is polarization independent. The polymer network in a PS TNLC not only results in a fast response time (0.9/9 milliseconds for rise/decay respectively), but also removes the backflow effect of TNLC which occurs in the high voltage regime.

Three-dimensional (3D) metal photonic crystals (MPCs) can exhibit interesting electromagnetic properties such as ultra-wide photonic or "plasmonic" band gaps, selectively tailored thermal emission, extrinsically modified absorption, and negative refractive index. Yet, optical-wavelength 3D MPCs remain relatively unexplored due to the challenges posed by their fabrication. This work explores the use of multi-photon direct laser writing (DLW) coupled with electroless metallization as a means for preparing MPCs. Multi-photon DLW was used to prepare polymeric photonic crystal (PC) templates having a targeted micron-scale structure and form. MPCs were then created by metallizing the polymeric PCs via wet-chemical electroless deposition. The electromagnetic properties of the polymeric PCs and the metallized structures were characterized using Fourier transform infrared spectroscopy. It is shown that metallization transforms the optical properties of the structures from those of conventional 3D dielectric PCs to those consistent with 3D MPCs that exhibit ultra-wide photonic band gaps. These data demonstrate that multi-photon DLW followed by electroless deposition provides a viable and highly flexible route to MPCs, opening a new path to metal photonic materials and devices.

In this research we study the effect of adding a single diffraction grating on top of a solar cell. We simulated the square diffraction grating, as well as triangular diffraction grating. The single square grating showed more favorable results, achieved 330% power improvement compared to 270% power improvement in the single triangular grating case. We simulated a triangle/triangle (top-bottom) and triangular/rectangular (top-bottom) grating cases. The Triangular grating achieved higher light absorption compared to rectangular grating. The best top grating was around 200nm grating period. We realized solar cell efficiency improvement about 42.4% for the triangular rectangular (top-bottom) grating. We studied the light transmitted power in a silicon solar cell using double diffraction triangular nano-grating. We simulated the solar cell behavior as it absorbs sunlight through its structure in various cases, results showed 270% increase of the weighted transmitted power when the top grating period (At) varies from 300nm to 800nm, and the bottom grating period (Ab) is at 500nm. We finally studied the effect of changing the location of the diffraction gratings with respect to the solar cell. We were able to increase the light efficiency by 120%. The study showed that the power absorbed by the solar cell is not sensitive to the grating location.

Pages viii, xii, xiv, 32, 110, 182, 188, 194 were blank and therefore omitted. / <p> The functional density of photonic integrated circuits can be significantly increased by stacking multiple waveguide layers. These vertically-integrated devices require optical couplers to switch light signals between their layers. In this thesis, optical coupling between two stacked silicon-on-insulator slab waveguides has been demonstrated with a coupling efficiency of 68±4%, obtained with a coupler length of 3535 μm. The main advantage of using a silicon-based material system for photonic integrated circuits is its compatability with existing electronics manufacturing processes, facilitating cost-effective fabrication and the monolithic integration of both photonics and electronics on a single device. </p> <p> Coupling between more complex silicon-on-insulator waveguide structures with lateral confinement was then demonstrated. The coupling ratio between stacked silicon rib wavelengths was measured to be 54±4%, while ratios of 71±4% and 93±4% were obtained for stacked channel waveguide and multimode interferometer-based couplers respectively. The corresponding coupler lengths for these three designs were 572 μm, 690 μm and 241 μm respectively. The sensitivity of these couplers to the input wavelength and polarization state has also been evaluated. These vertical-integrated couplers, along with other structures, have been thoroughly simulated, including their tolerance to fabrication errors. Novel fabrication processes used to demonstrate coupling in proof-of-concept devices have been developed, including an in-house wafer bonding procedure. </p> / Thesis / Doctor of Philosophy (PhD)

An active core fiber optic gas sensing technique has been developed by using a photonic crystal (PC) hollow core fiber (HCF) as a transducer and a tunable diode laser as a light source for multi-gas sensing. The intrinsic optical absorption signal of an analyte molecule in the near nfrared region is monitored for sensing C2H2,CO2 and NH3. Although the overtone absorptions are known to have low absorption cross-sections, this sensor can detect these gas components down to the parts-per-million (ppm) level by using a 1-meter hollow core fiber as a transducer. This sensor is an example of application of PC-HCF to gas sensor design. The sensitivity of this gas sensing technique can be improved by introducing periodic openings along the fiber, decreasing the hole diameter down to 0.5 mm and using a longer hollow optical fibers. Other advantages of this gas sensing technique include less interference, fast response and potential applications like high temperature, remote and corrosive gas sensing.

No description available.

No description available.

No description available.