Spelling suggestions: "subject:"aphysical anda a.theoretical astrochemistry"" "subject:"aphysical anda a.theoretical semiochemistry""
161 |
Two-channel Kondo phases in coupled quantum dotsMitchell, Andrew Keith January 2009 (has links)
We investigate systems comprising chains and rings of quantum dots, coupled to two metallic leads. Such systems allow to study the competition between orbital and spin degrees of freedom in a nanodevice, and the effect this subtle interplay has on two-channel Kondo (2CK) physics. We demonstrate that a rich range of strongly correlated electron behaviour results, with non-Fermi liquid 2CK phases and non-trivial phase transitions accessible. We employ physical arguments and the numerical renormalization group (NRG) technique to analyse these systems in detail, examining in particular both thermodynamic and dynamical properties. When leads are coupled to either end of a chain of dots, we show that the resulting behaviour on low temperature/energy scales can be understood in terms of simpler paradigmatic quantum `impurity' models. An effective low-energy single-spin 2CK model is derived for all odd-length chains, while the behaviour of even-length chains is related fundamentally to that of the classic `two-impurity Kondo' model. In particular, for small interdot coupling, we show that an effective coupling mediated though incipient single-channel Kondo states drives all odd chains to the 2CK fixed point (FP) on the lowest temperature/energy scales. A theory is also developed to describe a phase transition in even chains. We derive an effective channel-anisotropic 2CK model, which indicates that the critical FP of such models must be the 2CK FP. This physical picture is confirmed using NRG for various chain systems. We also examine the effect of local frustration on 2CK physics in mirror-symmetric ring systems. The importance of geometry and symmetry is demonstrated clearly in the markedly different physical behaviour that arises in systems where two leads are either connected to the same dot, or to neighbouring dots. In the latter case, we show for all odd-membered rings that two distinct 2CK phases, with different ground state parities, arise on tuning the interdot couplings. A frustration-induced phase transition thus occurs, the 2CK phases being separated by a novel critical point for which an effective low-energy model is derived. Precisely at the transition, parity mixing of the quasidegenerate local trimer states acts to destabilise the 2CK FPs, and the critical FP is shown to consist of a free pseudospin together with effective single-channel spin quenching. While connecting both leads to the same dot again results in two parity-distinct phases, a simple level-crossing transition now results due to the symmetry of the setup. The proposed geometry also allows access to a novel ferromagnetically-coupled two-channel local moment phase. Driven by varying the interdot couplings and occurring at the point of inherent magnetic frustration, such transitions in ring structures provide a striking example of the subtle interplay between internal spin and orbital degrees of freedom in coupled quantum dot systems, and the resulting effect on Kondo physics.
|
162 |
A study of atom and radical kineticsHanning-Lee, Mark Adrian January 1990 (has links)
This thesis describes the measurement of rate constants for gas phase reactions as a function of temperature (285 ≤ T/K ≤ 850) and pressure (48 ≤ P/Torr ≤ 700). One or both reactants was monitored directly in real time, using time–resolved resonance fluorescence (for atoms) and u.v. absorption (for radicals). Reactants were produced by exciplex laser flash photolysis. The technique was used to measure rate constants to high precision for the following reactions under the stated conditions: • H+O2+He->HO2+He and H+O2−→OH+O, for 800 ≤ T/K ≤ 850 and 100 ≤ P/Torr ≤ 259. A time–resolved study was performed at conditions close to criticality in the H2–O2 system. The competition between the two reactions affected the behaviour of the system after photolysis, and the rate constants were inferred from this behaviour. • H+C2H4+He<-->C2H5+He (T = 800 K, 97 ≤ P/Torr ≤ 600). The reactions were well into the fall–off region at all conditions studied. At 800 K, the system was studied under equilibrating conditions. The study provided values of the forward and reverse rate constants at high temperatures and enabled a test of a new theory of reversible unimolecular reactions. The controversial standard enthalpy of formation of ethyl, DH0f,298 (C2H5), was determined to be 120.2±0.8 kJ mol−1. Master Equation calculations showed that reversible and irreversible treatments of an equilibrating system should yield the same value for both thermal rate constants. • H+C3H5+He->C3H6+He (T = 291 K, 98 ≤ P/Torr ≤ 600) and O+C3H5 −→ products (286 ≤ T/K ≤ 500, 48 ≤ P/Torr ≤ 348). Both reactions were pressure–independent, and the latter was also independent of temperature with a value of (2.0±0.2) ×10−10 cm3 molecule−1 s−1. • H+C2H2+He<-->C2H3+He (298 ≤ T/K ≤ 845, 50 ≤ P/Torr ≤ 600). At 845 K, both reactions were in the fall–off region; rate constants were used to determine the standard enthalpy of formation of vinyl, ¢H0f,298 (C2H3), as 293±7 kJ mol−1. The value of this quantity has until recently been very controversial. • H+CH4 <--> CH3+H2. The standard enthalpy of formation of methyl, DH0 f,298 (CH3), was determined by re–analysing existing kinetic data at T = 825 K and 875 K. A value of 144.7±1.1 kJ mol−1 was determined. Preliminary models were examined to describe the loss of reactants from the observation region by diffusion and pump–out. Such models, including diffusion and drift, should prove useful in describing the loss of reactive species in many slow–flow systems, enabling more accurate rate constants to be determined.
|
163 |
Quasiparticle interference in strongly correlated electronic systemsDerry, Philip January 2017 (has links)
We investigate the manifestation of strong electronic correlations in the quasiparticle interference (QPI), arising from the scattering of conduction electrons from defects and impurities in an otherwise translationally-invariant host. The QPI may be measured experimentally as the Fourier transform of the spatial modulations in the host surface density of states that result, which are mapped using a scanning tunnelling microscope. We calculate the QPI for a range of physically relevant models, demonstrating the effect of strong local electronic correlations arising in systems of magnetic impurities adsorbed on the surface of non-interacting host systems. In the first instance the effect of these magnetic impurities is modelled via the single Anderson impurity model, treated via numerical renormalization group (NRG) calculations. The scattering of conduction electrons, and hence the QPI, demonstrate an array of characteristic signatures of the many-body state formed by the impurity, for example due to the Kondo effect. The effect of multiple impurities on the QPI is also investigated, with a numerically-exact treatment of the system of two Anderson impurities via state-of-the-art NRG calculations. Inter-impurity interactions are found to result in additional scattering channels and additional features in the QPI. The QPI is then investigated for the layered transition metal oxide Sr2RuO4, for which strong interactions in the host conduction electrons give rise to an unconventional triplet superconducting state at T<sub>c</sub> ∼ 1.5K. The detailed mechanism for this superconductivity is still unknown, but electron-electron or electron-phonon interactions are believed to play a central role. We simulate the QPI in Sr<sub>2</sub>RuO<sub>4</sub>, employing an effective parametrized model consisting of three conduction bands derived from the Ru 4d t2g orbitals that takes into account spin orbit coupling and the anisotropy of the Ru t2g orbitals. Signatures of such interactions in the normal state are investigated by comparing these model calculations to experimental results. We also calculate the QPI in the superconducting state, and propose how experimental measurements may provide direct evidence of the anisotropy and symmetry of the superconducting gap, and thus offer insight into the pairing mechanism and the superconducting state.
|
164 |
Nucléation, Croissance et Morphologie de Nanoparticules d'Or et d'Or-Cuivre sur Support Rutile par la Théorie de la Fonctionnelle de la Densité / Nucleation, growth and morphology of gold and gold-copper nanoparticles on rutile support by density functional theoryIachella, Mathilde 14 October 2016 (has links)
Dans cette étude, la nucléation, la croissance, la morphologie et la réactivité de nanoparticules Au, Cu et AuCu sont examinées sur support rutile TiO2 (110) stoechiométrique, réduit et hydraté. En premier lieu, la nucléation a été modélisée via l’adsorption et la diffusion d’atomes Au et Cu, à l’aide de calculs de type théorie de la fonctionnelle de la densité (DFT), et de diagrammes d’énergie libre en condition réaliste.Les résultats DFT+U ont montré le rôle promoteur des espèces hydroxyles en surface sur la nucléation, en accord avec les mesures expérimentales de microscopie STM. Ensuite, les propriétés thermodynamiques de croissance et de coalescence de clusters Au et Cu (de 1 à 38 atomes) ont été étudiées par une approche systématique qui a déterminé précisément la stabilité relative d’un grand nombre de structures, tout en soulignant la différence de compétition nucléation/croissance entre les deux métaux. Pour des tailles de particules comprises entre 38 et 201 atomes, et des morphologies variées, la stabilité absolue d’agrégats purs Au et Cu et de nanoalliages AuCu a été évaluée à l’aide de calculs d’énergie de surface. Cette approche a révélé l’existence de relations linéaires entre composition chimique et stabilité. Enfin, la réactivité de nanoparticules Au, Cu et AuCu a été examinée suivant deux aspects : le dépôt de clusters de 38 atomes sur support rutile stoechiométrique, et l’adsorption du monoxyde de carbone à l’interface entre le métal et le support.Cette adsorption est une étape clé pour la réaction d’oxydation du CO ; un procédé important en catalyse hétérogène. / In this study, the nucleation, growth, morphology and reactivity of Au, Cu and AuCu nanoparticles have been examined on rutile TiO2 (110) stoiciometric, reduced and hydrated supports. First, the nucleation has been modeled via the adsorption and diffusion of Au and Cu atoms, thanks to density functional theory (DFT) calculations, and free energy diagrams in realistic conditions. DFT+U results have shown the promotor role of surface hydroxyl species on the nucleation, in agreement with STM experimental measurements.Then, the growth and coalescence thermodynamic properties for Au and Cu clusters (from 1 to 38 atoms) have been investigated with a systematic approach which has determinated precisely the relative stability for a large number of structures, and has underlined the difference for the competition between nucleation and growth between the two metals. For particles in the range 38-201 atoms and varied morphologies, the absolute stability of Au and Cu aggregates and AuCu nanoalloys has been evaluated through surface energy calculations. This approach has revealed the existence of linear relations between the chemical composition and the stability.Finally, the reactivity of Au, Cu and AuCu nanoparticles has been examined following two aspects : the deposition of 38 atoms clustered on the stoichiometric rutile support, and the adsorption of carbon monoxide at the interface between the metal and the support. This adsorption is a key step for the CO oxidation reaction ; an important process in heterogeneous catalysis.
|
165 |
The collision dynamics of OH(A)+H2Seamons, Scott Andrew January 2015 (has links)
This thesis presents a joint experimental and theoretical study of a bimolecular collision between OH(A) and H<sub>2</sub> diatoms. The study focuses on the relationship between the initial, <b><i>j</i></b>, and final rotational angular momentum, <b><i>j'</i></b>. This relationship is explored from both a scalar point of view by measuring rotational energy transfer (RET), and a vectorial viewpoint by considering the collisional depolarisation. The experimental technique used in this investigation, Zeeman quantum beat spectroscopy, is first demonstrated by applying it to the determination of the lab-frame orientation of OH(X) photofragments following the photolysis of H<sub>2</sub>O<sub>2</sub>. The H<sub>2</sub>O<sub>2</sub> is photolysed by circularly-polarised light at 248 nm, and Zeeman quantum beat spectroscopy probes the angular momentum orientation as a function of the photofragment spin-rotation level. The results of this experiment are compared with orientation parameters predicted by a simulation that couples the rotation of the parent molecule to the torsional motion during bond cleavage. The calculations from the model agree qualitatively with those from the experiment. The Zeeman quantum beat spectroscopy technique is then used to monitor the evolution of angular momentum polarisation of OH(A) radicals during collisions with H<sub>2</sub>. The technique allows for the determination of depolarisation cross sections for oriented and aligned distributions, as a result of collisions with H<sub>2</sub>. Alongside this, cross sections for collisional quenching to non-reactive OH(X)+H<sub>2</sub> and reactive H<sub>2</sub>O+H products are determined. By resolving the fuorescence with a monochromator the contributions to depolarisation from elastic collisions (the elastic depolarisation cross sections) are measured alongside cross sections for RET. Cross sections for total depolarisation and rotational energy transfer demonstrate only weak dependence on the rotational quantum number of the OH(A) radical, <i>N</i><sub>OH</sub>. Competing quenching processes that fall with <i>N</i><sub>OH</sub> are likely a considerable cause of this weak dependence. Furthermore, the polarisation of the angular momentum of OH(A) is randomised following RET. The elastic depolarisation cross sections make only a small contribution to the depolarisation and fall with increasing <i>N</i><sub>OH</sub>. Collectively these trends have not been seen previously in similar studies on OH(A) collisions with atomic colliders. For the theoretical calculations, a four-atom quasi-classical trajectory (QCT) method has been developed, utilising Lagrangian multipliers to fix the OH(A) and H<sub>2</sub> bonds. The calculations demonstrate that collisions involving the formation of complexes that survive for several rotational periods are prevalent in this collision system, and that these lead to large amounts of depolarisation. The calculations also demonstrate that RET in the H<sub>2</sub> diatom supports higher levels of RET in OH(A) than seen in previous triatomic systems. Additionally, when one diatom is depolarised the accompanying diatom is typically also depolarised. These trends, at least in part, are owed to the highly attractive and anisotropic potential energy surface (PES) describing the interaction. The QCT calculations overestimate the experimentally-measured cross sections by more than a factor of 2. The calculations are adiabatic and do not account for the non-adiabatic activity associated with this collision system, and this is likely one cause of the discrepancies. In an attempt to further account for this overestimation, alternative angular momentum binning approaches for the QCT calculations are developed, but with limited success. Further exploration of the topology of the PES used in the calculations suggests that inadequacies in this surface are a major contributor to the discrepancies.
|
166 |
Coherent transfer between electron and nuclear spin qubits and their decoherence propertiesBrown, Richard Matthew January 2012 (has links)
Conventional computing faces a huge technical challenge as traditional transistors will soon reach their size limitations. This will halt progress in reaching faster processing speeds and to overcome this problem, require an entirely new approach. Quantum computing (QC) is a natural solution offering a route to miniaturisation by, for example, storing information in electron or nuclear spin states, whilst harnessing the power of quantum physics to perform certain calculations exponentially faster than its classical counterpart. However, QCs face many difficulties, such as, protecting the quantum-bit (qubit) from the environment and its irreversible loss through the process of decoherence. Hybrid systems provide a route to harnessing the benefits of multiple degrees of freedom through the coherent transfer of quantum information between them. In this thesis I show coherent qubit transfer between electron and nuclear spin states in a <sup>15</sup>N@C<sub>60</sub> molecular system (comprising a nitrogen atom encapsulated in a carbon cage) and a solid state system, using phosphorous donors in silicon (Si:P). The propagation uses a series of resonant mi- crowave and radiofrequency pulses and is shown with a two-way fidelity of around 90% for an arbitrary qubit state. The transfer allows quantum information to be held in the nuclear spin for up to 3 orders of magnitude longer than in the electron spin, producing a <sup>15</sup>N@C<sub>60</sub> and Si:P ‘quantum memory’ of up to 130 ms and 1.75 s, respectively. I show electron and nuclear spin relaxation (T<sub>1</sub>), in both systems, is dominated by a two-phonon process resonant with an excited state, with a constant electron/nuclear T<sub>1</sub> ratio. The thesis further investigates the decoherence and relaxation properties of metal atoms encapsulated in a carbon cage, termed metallofullerenes, discovering that exceptionally long electron spin decoherence times are possible, such that these can be considered a viable QC candidate.
|
167 |
Methods, rules and limits of successful self-assemblyWilliamson, Alexander James January 2011 (has links)
The self-assembly of structured particles into monodisperse clusters is a challenge on the nano-, micro- and even macro-scale. While biological systems are able to self-assemble with comparative ease, many aspects of this self-assembly are not fully understood. In this thesis, we look at the strategies and rules that can be applied to encourage the formation of monodisperse clusters. Though much of the inspiration is biological in nature, the simulations use a simple minimal patchy particle model and are thus applicable to a wide range of systems. The topics that this thesis addresses include: Encapsulation: We show how clusters can be used to encapsulate objects and demonstrate that such `templates' can be used to control the assembly mechanisms and enhance the formation of more complex objects. Hierarchical self-assembly: We investigate the use of hierarchical mechanisms in enhancing the formation of clusters. We find that, while we are able to extend the ranges where we see successful assembly by using a hierarchical assembly pathway, it does not straightforwardly provide a route to enhance the complexity of structures that can be formed. Pore formation: We use our simple model to investigate a particular biological example, namely the self-assembly and formation of heptameric alpha-haemolysin pores, and show that pore insertion is key to rationalising experimental results on this system. Phase re-entrance: We look at the computation of equilibrium phase diagrams for self-assembling systems, particularly focusing on the possible presence of an unusual liquid-vapour phase re-entrance that has been suggested by dynamical simulations, using a variety of techniques.
|
168 |
Quantum cascade laser spectroscopy : developments and applicationsWalker, Richard James January 2011 (has links)
This thesis presents work examining the characteristics and applicability of quantum cascade lasers. An introduction is given explaining both the desire for a widely tunable, narrow bandwidth device working in the midinfrared, as well as detailing the ways in which quantum cascade lasers (QCLs) fulfill these requirements. The development and manufacture of QCLs are then discussed. The experimental section of this thesis is then split into three parts. Chapter 2 concerns the characterisation and application of several pulsed QCLs. The intrapulse mode of operation is employed and the effect of the resulting rapid frequency chirp upon molecular spectra is investigated in the form of rapid passage signals. The evolution of said rapid passage signals is then investigated as a function of chromophore pressure and identity, with different QCLs, chirp rates, and optical path lengths. The prospect of producing population transfer with chirped lasers is discussed. Chapters 3, 4, and 5 are then concerned with the application and characterisation of continuous wave QCLs. In these chapters a widely tunable commercially produced EC-QCL is utilised as well as two DFB QCLs, one of which is used in tandem with a home-made mount and temperature controller. In Chapter 3 a number of sensitive detection techniques are compared with the employment of wavelength modulation spectroscopy, long path cells and optical cavities, and the narrow bandwidth of QCLs utilised to determine a previously unknown spectral constant of DBr. Chapters 4 and 5 then utilise the high power of an external cavity quantum cascade laser in sub-Doppler Lamb-dip and polarisation spectroscopy measurements and then a pump-probe experiment. The laser linewidth is investigated on a millisecond timescale returning a current noise limited value of c.a. 2 MHz and the fundamental linewidth of the device investigated by altering the injection current. Chapter 5 is concerned with the pump-probe experiment, directly measuring the hot band absorption in a ladder like transition (R(6.5)$_\frac{1}{2}$ $v=1\leftarrow0$ and P(7.5)$_\frac{1}{2}$ $v=1\leftarrow0$). The Bennett peak in the hot band is observed with a DFB-QCL swept at $\sim 0.15$ MHz ns$^{-1}$ and is seen not just as a pump bandwidth limited lineshape, but as a highly velocity selected rapid passage signal. The effect of pressure, pump and probe scan rate and power upon this rapid passage signal is also studied. It is further noted that rapid thermalisation occurs within $v=1$ such that at pressures above c.a. 30 mTorr a broad NO doublet absorption is observed beneath the Bennett peak from which a total population transfer of c.a. $16 \%$ can be estimated. Finally an experiment is discussed in which this population transfer could be increased for use in secondary applications. Chapter 6 then presents initial measurements with two prototype pulsed 3.3 \si{\micro\metre} QCLs considering the prospects of such devices. A Fabry-P\'rot device is first studied using a Fourier transform spectrometer and temperature tuning used to produce a spectrum of the Q-branch of CH$_4$ around 3025 cm$^$. Experiments are then performed using a DFB QCL investigating the chirp rate of the system as an indicator of the rate of heat accumulation within the system. Heat management is of particular consideration when the sea-change is made from pulsed to continuous devices. For this device absorption spectra of two CH$_4$ transitions at 2971 cm$^$ are used to determine the chirp rate, which is found to be c.a. 1.8 GHz ns$^$, at least an order of magnitude higher than that of the longer wavelength pulsed devices considered in Chapter 2.
|
169 |
Computational electrochemistryMenshykau, Dzianis January 2012 (has links)
This thesis addresses simulation of electrochemical experiments, with an emphasis on processes of diffusional mass transport to electrode surface. Following system has been studied: • Applying theoretical modeling and experimentation is shown that even significant surface roughness produced by deliberate polishing or scratching is not sufficient to be distinguished in cyclic voltammetry experiments conducted under the usual conditions. In stripping voltammetry experiment the shape of the voltammograms strongly depends on the model of the electron transfer but is not always sensitive to the precise model of the electrode surface; the conditions under which this is the case are identified, and generic roughness effects on stripping voltammetry are quantified. Electrode roughness can have a significant effect on the stripping of the metals from the solid electrode especially in respect of the voltammetric waveshape. • We first consider two different models of electrodes covered with electroinactive layers: the electrode is covered with a uniform layer and the layer contains pinholes. Both models are simulated and then compared to identify conditions under which they can be distinguished. Next we propose generic model to predict the influence of electroactive layer on the cyclic voltammetric. The conditions under which deviation from the behavior of a planar electrode are predicted. • We first consider one electron, one proton and next two electron, two proton reduction of surface bound species. Two mechanisms of reaction are considered: stepwise and concerted. Voltammetry studied under the three regimes of protons mass transport: infinitely fast (fully buffered solution), infinitely slow (infinitely high surface coverage of electrode) and intermediate case of finite rate of diffusional mass transport to electrode surface. Types of voltammograms observed in each case are presented and discussed. • Theory of chronoamperometry on disc and ring-recessed microelectrodes and their arrays is reported. Three and four different regimes of transient current versus time can be observed at microelectrode arrays of disc and ring electrodes, accordingly. A generic, accurate and easy to use method of experimental chronoamperometric data analysis is proposed. It is shown that the method can be applied to the simultaneous measurement of D and nC in solution. • The fabrication, characterization, and use of arrays of ring-recessed disk generator-colector microelectrodes are reported. Experiments and simulations relating to time- of-flight experiments in which material electrogenerated at a disk is diffusionally transported to the ring are reported. We further study voltammetry of electrochemically active species which undergoes first and second order chemical reactions. Current transients are found to be sensitive to the diffusion coefficient of both the reduced and oxidised species as well as to the rate of the chemical reaction and its mechanism.
|
170 |
Monolayers of cationic surfactants at the air-water and oil-water interfacesKnock, Mona Marie January 2003 (has links)
Monolayers of the cationic surfactant hexadecyltrimethylammonium halide (CTAX, where X = F¯, Cl¯, Br¯, and I¯) have been studied at the air-water and oilwater interfaces. At the air-water interface, the effects of the halide counterion and the addition of counterion were investigated. Sum-frequency spectroscopy (SFS), ellipsometry, and surface tensiometry indicated that the counterion changed the efficiency and effectiveness of the surfactant, both decreasing in the order of Br¯> Cl¯>F¯. The addition of salt in the form of 0.1 M KX was found to reduce the cmc but had little effect on the limiting area per molecule attained at the cmc, which increased from 44 Å<sup>2</sup> for CTAB to 65 Å<sup>2</sup> for CTAC and ca. 94 Å<sup>2</sup> for CTAF. Neither SFS nor ellipsometry provided any firm evidence for specific effects of the halide ions on the structure of the surfactant monolayers. For CTAB monolayers in the absence of excess electrolyte, the effect of area per molecule on the sum-frequency (SF) spectra was studied. Mixed monolayers of CTAB and tetradecane at the air-water interface exhibit a first-order phase transition from a conformationally disordered to a conformationally ordered state as the temperature is lowered. The phase transition occurs ca. 11 °C above the bulk melting point of tetradecane. A new experimental arrangement is described for acquiring SF spectra from surfactants at the oil-water interface. The key features of this approach are the stabilisation of a thin oil film between a sapphire prism and an aqueous phase, and the use of total internal reflection to enhance the total signal and discriminate against signals from other interfaces in the system. With this new methodology, the first SF vibrational spectra of surfactant monolayers at an alkane-water interface were obtained. Surface tensiometry was used to characterise the monolayers further. The structure of CTAB monolayers at the hexadecane-water interface was determined by SFS and compared with monolayers of CTAB at the air-water interface. At low concentrations, CTAB/hexadecane showed the expected features in the C-H stretching region, characteristic of a conformationally disordered monolayer. As the bulk concentration approached the critical micelle concentration, the spectra changed to one characteristic of a more ordered, upright conformation. Ellipsometric measurements supported this conclusion. This qualitative structural change is not observed in analogous monolayers at the air-water interface or CCl<sub>4</sub>-water interface, or in surfactant solutions in contact with a hydrophobic solid surface.
|
Page generated in 0.0867 seconds