Orientador: Carlos Alberto dos Reis Filho / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-10T09:10:45Z (GMT). No. of bitstreams: 1 Nadalin_EvertonZaccaria_M.pdf: 2191420 bytes, checksum: 38decb6d182261bd5e5fc2df03ad1b9a (MD5) Previous issue date: 2007 / Resumo: Este trabalho está relacionado com o problema da pesagem de um bovino criado em campo aberto, não confinado, destinado ao corte. O conhecimento da evolução contínua do peso do animal é de grande importância neste ramo de negócios e uma solução tecnicamente satisfatória, de custo aceitável e de tecnologia proprietária, certamente representa uma significativa contribuição ao Brasil. Uma solução idealizada, que é a meta maior do projeto em que este trabalho se enquadra, prevê o uso de um dispositivo instalado nas patas do animal, contendo um sensor de pressão ou de impacto e uma unidade eletrônica local que condiciona, digitaliza e armazena os sinais do sensor. Além disto, a unidade eletrônica transmite estes dados através de uma rede de comunicação de dados sem fio e de baixo consumo de energia para centrais de coleta e processamento estrategicamente situadas na área em que o gado se desenvolve. Tal sistema viabiliza, deste modo, acumular no tempo as informações de cada pisada de cada animal. O sinal produzido por um sensor em conseqüência do impacto de cada pisada é influenciado por diversos parâmetros, dentre os quais o peso do animal. Sendo assim, é impossível estabelecer uma relação direta e exclusiva entre o sinal do sensor e o peso. Entretanto, os valores acumulados destes sinais descrevem uma função de múltiplas variáveis que pode ser tratada juntamente com algumas informações complementares sobre o ambiente, buscando-se o isolamento da variável peso. Para isto, uma abordagem adequada prevê o desenvolvimento ou adoção de um modelo do mecanismo de movimentação do animal e o tratamento numérico dos dados acumulados aplicando filtragens e buscas de correlações. Trata-se, portanto, de uma solução de natureza multidisciplinar, que exige uma aliança de conhecimentos complementares para a sua realização. Coube ao presente trabalho, desenvolvido no âmbito da engenharia eletrônica, a implementação de uma etapa preliminar e necessária que consiste de um sistema de caracterização de pisadas constituído de um conjunto de sensores piezoelétricos, uma interface que permite a transferência dos dados destes sensores a um computador e um ambiente de software através do qual foram testados algoritmos para a verificação de correlação entre os sinais associados às pisadas e o peso do agente. São frutos deste trabalho um sistema de coleta automática dos sinais de pisadas, que permitiu a captura de sinais com sensores instalados tanto numa plataforma fixa como num sapato tênis, e um estudo comparativo dos resultados obtidos de tratamentos numéricos distintos aplicados aos dados experimentais / Abstract: This work deals with the problem of weighting non-confined cattle raised in open field for meat production. The knowledge of the continuous weight change of the animal is of great importance in this business field. Therefore, a technically satisfactory solution, with acceptable price and customized technology, certainly represents a significant contribution to Brazil. The idealized solution, which is the major goal to be pursued by the project in which this work takes part, considers the use of a device placed into the animal¿s hooves. It would contain a pressure or impact sensor and a local electronic unit, which conditions, digitizes and stores the signals received from the sensor. The electronic unit also transmits this data through a low-energy wireless communication network to reception and processing stations placed strategically around the area where the cattle raises. Such a system enables accumulating data about the steps of each animal throughout time. Several parameters, including the animal¿s weight, influence the signal produced by a sensor as a consequence to the impact of a step. Therefore, it is impossible to establish a direct and exclusive relation between the signal given by the sensor and the weight. Nevertheless, the accumulated data of these signals describe a multiple variable function that can be treated together with some complementary information about the environment, seeking the isolation of the weight variable. An adequate approach predicts the development or use of a model of the animal¿s locomotion mechanism and the numeric treatment of the accumulated data by applying filtering and seeking correlations. The multidisciplinary nature of this solution demands an alliance of complementary knowledge for its accomplishment. This work, developed in the scope of electrical engineering, implemented a necessary and preliminary stage that consists of: a step characterization system, made of a set of piezoelectric sensors, an interface that allows transferring data from the sensors to a computer and a software environment, in which algorithms were tested to verify the correlation between the signals associated to the steps and the agent¿s weight. The main result of this work are a system that performs automatic collecting of steps, which allowed the capture of the signals with sensors installed both on a fixed platform and inside tennis shoes, and the comparative study of the results of different numerical treatments applied to the experimental data / Mestrado / Eletrônica, Microeletrônica e Optoeletrônica / Mestre em Engenharia Elétrica

This diploma thesis deals with the application of three methods to limit resonances of critical frequencies and with a description of their influence on speed control loop of linear drive. The first damping method involved the use of an electro-magnetic tilger attached to the structure of stand on critical locations. The second method involved the use of a jerk decoupling in linear direct drives. A Cauer-filter that was activated in the controller of linear motor was added to both methods. The appropriate measuring technique for these frequencies was systematically analysed and selected. Further in this document models of mechanical structure and controlling are described. Matlab®/Simulink® software was used for the data processing and the modification of models according to the real structure.

The door lock - a key function in every modern home, as well as a product which is today undergoing drastic change. The digital revolution has not left the door lock untouched, and there is today a wide variety of digital door locks utilizing technologies ranging from touch displays to fingerprint readers. The premises of the project was to try a different approach to the digital door lock and implement it schoolyard-style using a secret knock sequence, set by the user. The secret sequence would consist of two elements, both a rhythmical and a positional pattern. To unlock the door, the user would therefore need to simultaneously knock the correct rhythm and knock at the correct positions. To record and analyze the knock vibrations, piezo electric sensors connected to an Arduino Uno were used. To unlock the door, a small servo motor, two gears and a timing belt were used to turn the lock turning knob . Despite a short time frame and hardships due to the limitations caused by the coronavirus outbreak, a fully functional prototype which fulfilled both reliability and consistency was achieved. It could with good consistency recognize the test sequence, which was the intro rhythm to ”We Will Rock You” knocked in a square pattern. But even with flawless functionality, the conclusion would have been the same. The security of the system may be exceptional from a technical perspective, but it falls flat when the human factor is taken into account. The ability for a potential burglar to simply watch as one executes the secret knock is too much of a security hazard for the system to ever be considered as a competitor to other alternatives. The usage of the system is therefore better suited for applications where the thrill of using the product is more important than the actual security of it. / Dörrlåset - en grundläggande funktion i varje modernt hem, och samtidigt en produkt som idag genomgår drastisk förändring. Som resultat av den digitala revolutionen finns det idag en uppsjö av olika digitala dörrlås som utnyttjar allt från touchskärmar till fingeravtrycksläsare. Syftet med projektet var att testa en annorlunda tappning på det digitala dörrlåset, och förverkliga något många hade drömt om i barndomen - ett dörrlås aktiverat genom ett eget hemligt knackningsmönster. Det hemliga knackningsmönstret skulle då bestå av både ett rytmiskt och ett positionellt mönster. Därmed skulle den som ville öppna dörren behöva knacka både rätt rytm, och på rätt ställen på dörren. För att spela in och analysera vibrationerna från knackningarna användes piezoelektriska sensorer kopplade till en Arduino Uno. Mekanismen som styrde själva upplåsningen bestod av en liten servomotor, två kugghjul och en kuggrem som kopplade samman det hela. Trots en begränsad tidsram och motgångar orsakade av coronaviruset lyckades en fullt fungerande prototyp med hög pålitlighet färdigställas. Den kunde med hög tillförlitlighet känns igen testsekvensen, som var introrytmen till ”We Will Rock You” knackat i mönstret av en kvadrat. Men även med felfri prestanda hade slutsatsen varit densamma. Säkerheten för systemet må vara exeptionell ur ett rent tekniskt perspektiv, men den faller platt när den mänskliga faktorn tas med i beräkningen. Risken att en potentiell inbrottstjuv helt enkelt tittar på när någon knackar det hemliga mönstret är för stor för att systemet någonsin skulle kunna betraktas som en seriös konkurrent till andra digitala dörrlås. Produkten är därmed bäst lämpad för användningsområden där nöjet av att använda den är av högre prioritet än själva säkerheten.