Du, Xiaona. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2011. / Includes bibliographical references (leaves 65-74). / Abstracts in English and Chinese. / ABSTRACT --- p.i / 摘要 --- p.iii / ACKNOWLEDGEMENTS --- p.iii / TABLE OF CONTENTS --- p.iv / LIST OF FIGURES --- p.xi / LIST OF TABLES --- p.ix / Chapter CHAPTER ONE --- INTRODUCTION --- p.1 / Chapter 1.1 --- Background --- p.2 / Chapter 1.1.1 --- Development of portable devices --- p.2 / Chapter 1.1.2 --- Energy harvesting --- p.2 / Chapter 1.1.3 --- Piezoelectric energy harvesting --- p.5 / Chapter 1.1.4 --- Impact based piezoelectric energy harvester --- p.10 / Chapter 1.1.5 --- Operation of piezoelectric materials --- p.14 / Chapter 1.2 --- Research Objective --- p.16 / Chapter 1.3 --- Thesis Organization --- p.19 / Chapter CHAPTER TWO --- DESIGN AND MODELING OF AN EXTENDED ROTARY ENERGY HARVESTER --- p.20 / Chapter 2.1 --- Design Considerations of an Extended Rotary Energy Harvester --- p.20 / Chapter 2.2 --- Models of Rotary Energy Harvesters --- p.24 / Chapter 2.3 --- Simulation Results --- p.33 / Chapter 2.4 --- Chapter Summary --- p.37 / Chapter CHAPTER THREE --- "PROTOTYPE, TESTING AND OUTPUT POWER OF EXTENDED ROTARY ENERGY HARVESTER" --- p.38 / Chapter 3.1 --- Prototype and Experiment --- p.38 / Chapter 3.2 --- Output Power --- p.44 / Chapter 3.2.1 --- Maximum tip displacement on output power --- p.44 / Chapter 3.2.2 --- Rotational frequency on output power --- p.47 / Chapter 3.3 --- Chapter Summary --- p.50 / Chapter CHAPTER FOUR --- COMPARISON BETWEEN E-REH AND REH --- p.51 / Chapter 4.1 --- Force on Output Power --- p.52 / Chapter 4.2 --- Rotational Frequency on Output Power --- p.54 / Chapter 4.3 --- Comparison on Design Space --- p.59 / Chapter 4.4 --- Chapter Summary --- p.62 / Chapter CHAPTER FIVE --- CONCLUSION AND FUTURE WORK --- p.63 / Chapter 5.1 --- Conclusion --- p.63 / Chapter 5.2 --- Future Work --- p.64 / BIBLIOGRAPHY --- p.65

Masters Research - Master of Engineering (Research) / This thesis considers a number of related problems in the area of passive and semi-active vibration control of piezoelectric laminates. The thesis consists of three main parts. The first part of the thesis develops a mathematical model of a physical resonant system-piezoelectric laminated simply supported beam. It is essential to have a good understanding of the physical system so that the associated problems with passive and semi-active shunt damping can be addressed. The second part of the thesis is concerned with problems related with current passive shunt damping techniques using a single piezoelectric laminate. One of the current problems with multiple mode techniques is determining the correct resistive damping for each resonant mode. Therefore, a systematic method is presented for determining the optimal resistance elements by minimizing the H2 norm of the damped system. After the design process, shunt circuits are normally implemented using discrete resistors, capacitors and virtual inductors (Riordan Gyrators). The difficulty in constructing the shunt circuits and achieving reasonable performance has been an ongoing problem. A new approach to implementing piezoelectric shunt circuits is presented. A “synthetic impedance”, consisting of a voltage controlled current source and digital signal processor (DSP) system, is used to synthesize the terminal impedance of a required shunt network. The third part of the thesis is concerned with the semi-active vibration control of piezoelectric laminated. This part addresses a number of associated problems with the current passive shunt damping schemes. The foremost being the complexity of the shunt circuits required to dampen multiple modes. They generally act to minimize structural vibration at a specific frequency – which are rarely stationary. Therefore, a new broadband semi-active shunt technique for controlling multiple modes has been developed. The “negative capacitor” controller is proposed theoretically, and then validated experimentally. The negative capacitor is simular in nature to a passive shunt damper as it uses a single piezoelectric transducer to dampen multiple modes of a flexible structure.

A prototype acoustic streaming pump for microfluidic applications was developed. A novel integration scheme was devised based on the acoustic reflector concept. Numerical simulations were conducted to predict the flow patterns around the transducer. Ultrasound transducers using P(VDF-TrFE) as the piezoelectric element were fabricated using lithography-based microfabrication technology. Silicon channels were fabricated using anisotropic etching. A heat-press bonding technique was adopted to bond the transducers with the silicon chips using CYTOP fluoropolymer as the adhesive. The piezoelectric transducers were characterized to have a resonance frequency of 82 MHz. Micro-PIV experiments were performed in the near and far-fields of the ultrasonic transducer/pump. The near field experiments showed complex flow patterns that could enhance mixing. Estimates of the pumping pressure were obtained using transient flow velocities in the far-field. Conservative estimates indicate the total back pressure the micropump can pump against is 39 Pa. Future research directions were suggested.

A prototype acoustic streaming pump for microfluidic applications was developed. A novel integration scheme was devised based on the acoustic reflector concept. Numerical simulations were conducted to predict the flow patterns around the transducer. Ultrasound transducers using P(VDF-TrFE) as the piezoelectric element were fabricated using lithography-based microfabrication technology. Silicon channels were fabricated using anisotropic etching. A heat-press bonding technique was adopted to bond the transducers with the silicon chips using CYTOP fluoropolymer as the adhesive. The piezoelectric transducers were characterized to have a resonance frequency of 82 MHz. Micro-PIV experiments were performed in the near and far-fields of the ultrasonic transducer/pump. The near field experiments showed complex flow patterns that could enhance mixing. Estimates of the pumping pressure were obtained using transient flow velocities in the far-field. Conservative estimates indicate the total back pressure the micropump can pump against is 39 Pa. Future research directions were suggested.

Piezoelectric actuators have been developed in various forms ranging from discrete layered composites to functionally graded composites. These composite actuators are usually made up of differentially poled piezoelectric ceramics. This study presents analyses of thermo-electro-mechanical response of piezoelectric actuators having combinations of metal and ceramic constituents with through thickness gradual variations of the metal and ceramic compositions. This is done in order to achieve better performance. The piezoelectric ceramic constituent allows for electro-mechanical coupling response and higher resistance to elevated temperatures while the metal constituent provides more ductile composites. The gradual variation in the ceramic and metal composition helps to avoid high stress concentrations at the layer interfaces in composites. A functionally graded composite is analyzed with discrete layers of piezoelectric ceramic/metal composite. Each layer in the functionally graded composite has a fixed ceramic/metal composition. The governing equation for such a piezoelectric functionally composite beam is presented based on a multi-layer Euler-Bernoulli beam model and the overall displacement response of the beam under thermal, mechanical and electrical stimuli is predicted. The variation of this response is studied with respect to functional grading parameter, number of layers, thermal and electrical and mechanical stimuli applied. It is found that the displacement due to thermal and mechanical effects can be mitigated to some extent by the application of an electric field. It is also observed that layers of varying thickness may be assumed to model the functional grading more accurately i.e. use thinner layers where the grading changes rapidly and thicker layers where the grading changes gradually. In addition to the above parametric studies, the change in the material properties with temperature is also studied. It is found that the temperature-dependent material parameters are important when the actuators are subjected to elevated temperatures.

Over the past several years, there has been significant development in the field of applications for piezoelectric materials. This thesis focuses on using these materials in a piezohydraulic pump system. Piezopump systems typically operate by pushing fluid through check valves to produce positive fluid flow. The accompanying hydraulic system utilizes a control valve, hydraulic accumulator, and hydraulic actuator. The function of the piezopump is to convert the very small displacements of the piezoelectric stack actuators into useful work. This paper details the design, construction, and testing of four such possible pumping systems. The first system was a thin diaphragm piezo pump which utilized conventional check valves to rectify the flow. This pump was the next generation system in a series of piezopumps designed at Georgia Tech. Its peak performance with a driving voltage of 150V was a flowrate of 140 cc/min with a blocked pressure of 1.38 MPa (200 psi.). The key features of this system were its aluminum construction and ease of assembly. A new technology was developed which used a resonant fluid cavity to build usable pressure for a pumping system. Two half wave resonators were build to operate at frequencies of 20 kHz and 1 kHz. These systems produced good pressure during resonance, but attempts to rectify these high frequency pulses were unsuccessful. Rectification methods such as reed valves, vortex fluid diodes, and nozzle/ diffuser arrangements were discussed. A reed valve system was developed and tested. A fourth piezoelectric system was developed which used the driving elements and the reed valves originally designed for the resonant systems. This non resonant reed valve pump produced good results. This pump systems produced 338cc/min at a frequency of 400 Hz. It also produced a blocked pressure of 250 psi. There are many applications for these miniature high flow pumping systems. The technology in the reed valve pump is scalable, and the size of this particular system may be reduced dramatically to offer even more space saving potential.

In this thesis, the c-axis-oriented AlN films were deposited on piezoelectric substrates, lithium niobate (LiNbO3), ST-Quartz, and non-piezoelectric substrate, silicon (Si), by reactive rf magnetron sputtering. AlN films were deposited with the nitrogen concentration (N2/Ar+N2) of 20¡ã80%, the chamber pressure of 1¡ã15mTorr, the rf power of 200¡ã450W, the deposition time of 1~3 hours and the substrate temperature of 100¡ã400¢J. The correlation between growth parameters and piezoelectric coefficients will be investigated by XRD¡Bd33 and K2 analysis in this study. The experimental results showed that the values of d33 become larger as the intensity of X-ray is stronger. It can also be concluded that the smaller the FWHM of (002) XRD peak is, the larger the value of d33 is. With various sputtering parameters, the K2 values exhibit diversely. The multilayer structures of AlN/LiNbO3 and AlN/ST-Quartz both make lower values of K2. In general, by combining the higher K2 and d33 values of LiNbO3 and ST-Quartz with high wave velocity of AlN, the high-frequency with high performance SAW devices can be obtained.

Thesis (M.S.)--University of Kentucky, 2001. / Title from document title page. Document formatted into pages; contains x, 87 p. : ill. Includes abstract. Includes bibliographical references (p. 83-86).

Thesis (Ph.D.)--Drexel University, 2009. / Includes abstract and vita. Includes bibliographical references (leaves 172-181).

Thesis (M. Phil.)--University of Hong Kong, 1986.