Spelling suggestions: "subject:"piezoelectric resonator"" "subject:"apiezoelectric resonator""
1 |
Měření náhradního obvodu piezoelektrického rezonátoru / Measurment of Equivalent Circuit of Piezoelectric ResonatorVomočil, Vojtěch January 2010 (has links)
This theis deals with the general overview of the piezoelectric theory, focused both on the mathematical description and on the attributes of piezoelectric materials. It further focuses on the description of piezoelectric resonators with a more detailed explantation of their equivalent scheme and measurement methods of its single elements. The practical part of the thesis rests on the proposal of a measurement apparatus which will serve to measuring the equivalent circuit piezoelectric resonator elements. The realization of the apparatus and its functionality testing are described. In the experimental part of the thesis, the measured rates are processed and levels of the electric equivalent circuit elements of the used piesoelectric resonator for the basic and the two higher closest resonance frequency are set. The measured results are compiled into a standard measurement protocol. This thesis should place basics to the growing laboratory. It should also be a source of necessary theoretical and practical information for this lab.
|
2 |
Piezo-on-Silicon Microelectromechanical ResonatorsHumad, Shweta 12 July 2004 (has links)
This thesis reports on the use of sputter-deposited zinc-oxide as a transduction mechanism to actuate and sense single crystal silicon (SCS) microelectromechanical (MEMS) resonators. Low frequency prototypes of piezo-on-silicon resonators with operating frequencies in the range of hundreds of kHz were implemented using micromechanical single crystal silicon clamped-clamped beam resonators. The resonators reported here extend the frequency of this technology into very high frequency (VHF range) by using in-plane length extensional bulk resonant modes. This thesis outlines the design, implementation and characterization of high-frequency single crystal silicon (SCS) block resonators with piezoelectric electromechanical transducers. The resonators are fabricated on 4m thick SOI substrates and use sputtered ZnO as the piezo material. The centrally supported block resonators operate in their first and higher order length extensional bulk modes with high quality factor (Q). Measurement results are in good agreement with the developed ANSYS simulations.
|
3 |
CMOS kompatibilní piezoelektrický rezonátor s FET strukturou pro řízení vlastností grafenové monovrstvy / CMOS compatible piezoelectric resonator with FET structure for graphene monolayer properties modulationGablech, Imrich January 2018 (has links)
Práce je zaměřena na výzkum nové struktury umožňující charakterizaci fyzikálních vlastností grafenu při přesně řízených podmínkách. Návrh spojuje MEMS piezoelektrický rezonátor spolu s Hall Bar/FET strukturou. Tento přístup umožňuje měnit vlastnosti grafenu odděleně nebo společně dvěma metodami. Mechanický způsob je založen na relativní deformaci způsobené rezonátorem, na kterém je umístěna grafenová monovrstva. Navrhovaná struktura umožňuje měřit vlastnosti grafenu vyvolané pouze změnou mechanického pnutí a frekvencí nucených kmitů bez vlivu vnějšího elektrického pole. Druhý přístup přidává možnost ovládat fyzikální vlastnosti grafenu pomocí elektrického pole FET struktury. Tato technika využívá grafenovou monovrstvu jako laditelný sensor pro molekulární detekci. Měření koncentrace v jednotkách ppb není konstrukčně ničím limitováno. Realizované frekvenčně laditelné piezoelektrické MEMS rezonátory s monovrstvou grafenu budou využitelné v mnoha oblastech pro detekci na molekulové úrovni. Výsledné struktury budou vyrobeny v souladu s požadavky na bio- a CMOS kompatibilitu.
|
4 |
Design and phase-noise modeling of temperature-compensated high frequency MEMS-CMOS reference oscillatorsMiri Lavasani, Seyed Hossein 18 May 2010 (has links)
Frequency reference oscillator is a critical component of modern radio transceivers. Currently, most reference oscillators are based on low-frequency quartz crystals that are inherently bulky and incompatible with standard micro-fabrication processes. Moreover, their frequency limitation (<200MHz) requires large up-conversion ratio in multigigahertz frequency synthesizers, which in turn, degrades the phase-noise. Recent advances in MEMS technology have made realization of high-frequency on-chip low phase-noise MEMS oscillators possible.
Although significant research has been directed toward replacing quartz crystal oscillators with integrated micromechanical oscillators, their phase-noise performance is not well modeled. In addition, little attention has been paid to developing electronic frequency tuning techniques to compensate for temperature/process variation and improve the absolute frequency accuracy.
The objective of this dissertation was to realize high-frequency temperature-compensated high-frequency (>100MHz) micromechanical oscillators and study their phase-noise performance. To this end, low-power low-noise CMOS transimpedance amplifiers (TIA) that employ novel gain and bandwidth enhancement techniques are interfaced with high frequency (>100MHz) micromechanical resonators. The oscillation frequency is varied by a tuning network that uses frequency tuning enhancement techniques to increase the tuning range with minimal effect on the phase-noise performance. Taking advantage of extended frequency tuning range, and on-chip temperature-compensation circuitry is embedded with the sustaining circuitry to electronically temperature-compensate the oscillator. Finally, detailed study of the phase-noise in micromechanical oscillators is performed and analytical phase-noise models are derived.
|
Page generated in 0.0826 seconds