Wheat (Triticum aestivum, L) and barley (Hordeum vulgare) are widely grown as winter annual grains in a double crop rotation with soybean (Glycine max, L. Merr.) in much of the U.S. Improved management strategies and the development cultivars that meet the quality requirements of higher value end-use markets is important to increase production and profitability of winter annual grains and the double crop rotation in the Eastern U.S. In Chapter I, fifteen commercially relevant winter wheat genotypes ranging in maturity were sown in a split-plot design (sowing date=main plot, genotype=subplot) at three different sowing dates (considered to be 'very early' (20-28 days before recommended), 'early (6-11 days before recommended)', or 'recommended') and replicated three times at eight environments (site-year) from 2015-2018 in VA and KY. Grain yield, tiller estimation, heading date, protein, and 1000-kernel weight were assessed for each yield plot. At all environments, sowing earlier in the fall achieved an earlier (P<0.05) heading date, while grain yields varied depending on environment and genotype. Genotype by sowing date interactions were non-significant (P<0.05) at five site-years and significant (P<0.05) at three site-years. Molecular markers can be associated with phenotypic traits via quantitative trait loci (QTL) mapping, these markers can be used by breeders in marker assisted selection (MAS) to indirectly select phenotypic traits that are difficult or expensive to measure. In Chapter II, the genetic architecture of end-use quality is investigated in two soft red winter wheat bi-parental (Pioneer '25R47' / 'Jamestown' and Pioneer '26R46' / 'Tribute'). Both populations were genotyped with a public 90,000 wheat iSelect SNP-Array, grown over two crop seasons at two Virginia sites, evaluated for quality traits at the USDA-ARS Soft Wheat Quality Lab (SWQL), and analyzed with QTL mapping. This chapter describes a total of 24 putative QTL that were identified on 13 different chromosomes and associated with grain characteristics, milling, and/or baking performance along with phenotypic data for both populations, other putative QTL, and transgressive progeny with exceptional flour yield and cookie diameters. A region on 3A (Qfy.vt.3A.Jtwn) is a strong candidate to be utilized for MAS in soft red winter wheat breeding programs as it explained 6.9-10.3% (Pioneer 25R47 / Jamestown) and 4.6-17.0% (Pioneer 26R46 / Tribute) of the phenotypic variation for flour yield. In Chapter III, malt quality genetic structure was investigated in two winter 'malt x feed' doubled haploid barley breeding populations. Both populations were genotyped with the iSelect InfiniumTM SNP assay consisting of 50,000 barley SNPs, grown in two to three Virginia environments (Blacksburg and Warsaw) during 2017 - 2019, and characterized for 11 phenotypic traits associated with malting quality. QTL mapping validated six previously reported regions (Mohammadi, et al., 2015, GrainGenes 3.0, 2019) that are strongly associated (LOD > 3.0) with relevant malt quality traits. Phenotypic variation for malt quality was largely and consistently explained by QTL on chromosomes 1H, 5H, and 7H in the Endeavor / VA09B-34 population and by two separate QTL on 1H in the Violetta / VA09B-34 population. A region on 4H corresponding with QDp.DiMo-4H, explained between 12.1 - 42.2% (Endeavor / VA09B-34) and 30.0 - 55.7% (Violetta / VA09B-34) of the phenotypic variation for diastatic power (DU). These QTL are recommended for MAS in order to aid breeding strategies that aim to select for improved malting characteristics in Eastern U.S. malt barley breeding material. / Doctor of Philosophy / Wheat (Triticum aestivum, L) and barley (Hordeum vulgare) are staple crops throughout the world, and are the third and fourth most produced cereals crop according to the FAO. Primarily grown for human consumption, wheat and barley provide a significant percentage of the nutritional requirements for the human populations. According to the United Nations, wheat contributes 20% of all calories consumed by humans. Barley is the primary ingredient used to make beer. Increased productivity of all cropping and livestock systems is required in order to feed a growing human population while also restoring and preserving natural ecosystems. This can be accomplished through breeding and improved cropping systems management. Planting of existing cropland more frequently is fundamental to the improvement of cropping system productivity. In much of the U.S. (southern two-thirds of the lower 48), annual winter grains such as wheat and barley can be grown over the winter and spring in between the typical corn (Zea mays subsp. mays) and soybean (Glycine max, L. Merr.) growing seasons. Therefore, producing three crops in two years, as opposed to only two. Only between 6 and 11 million acres are double cropped in the US annually, for perspective, in 2018, 89 million acres of both corn and soybeans, which can only grow in summer, were planted. Over half of the soybean (~45 million) acres in Midwestern and Southeastern states could support double cropping. This is a major opportunity to maximize output per unit area, freeing up less productive land to be restored as natural ecosystems, potentially increasing carbon sequestration and species biodiversity. Winter annual grains have a very similar composition (high carbohydrate, low protein and oil) to corn, and could fill similar end-use markets currently dominated by corn (i.e. ethanol or livestock feed). For double cropping to be more widely deployed, it must be more profitable. Increased profitability of growing three crops in two years as opposed to two must outweigh the added cost of planting, managing, harvesting, and marketing the additional winter crop. Therefore, it is important to investigate management strategies that could increase production per unit area and develop new winter annual cultivars with improved end-use characteristics in order to make the winter annual more desirable to the end-users. Chapter I investigates sowing winter wheat earlier in the fall (i.e. 1st week of Oct. or last week of Sept.) in order to achieve an earlier harvest in the spring and earlier soybean planting (yield decreases 0.5 to 1 bu/ac per day that sowing is delayed), while also offering other benefits such as better-established root systems going into winter, which improves water infiltration and reduces erosion. At all environments, sowing earlier in the fall achieved an earlier heading date, while grain yields varied depending on environment and genotype. Genotype by sowing date interactions were non-significant at five site-years and significant at three site-years. Chapters II and III investigate the genetic architecture of winter wheat and winter barley breeding populations for end-use quality traits (milling/baking and malting). This was done in order to identify molecular markers that could be used to screen breeding material for improved end-use quality. The markers could then be used to assist breeders in developing soft red winter wheat cultivars with greater flour yields/improved baking performance and winter malt barley cultivars that can be grown in the Eastern U.S. and are suitable for the craft beer market. Chapter II describes 24 genomic regions that influences milling/baking performance in two soft red winter wheat breeding populations. Chapter III describes 6 genomic regions that influence malting performance in two winter barley breeding populations.

Thesis (M.Sc. (Agriculture (Crop Science)) -- University of Limpopo, 2004. / Canon Collins Educational Trust of Southern Africa (CCETSA), and the National Research Foundation (NRF)

In general, yield reduction in most dryland maize growing areas of South Africa occur because seasonal rainfall distribution is erratic with annual variation that cannot be predicted accurately. Cultivar selection, planting date and plant density are other factors that consistently affect maize yield. Long growing season maize cultivars are higher yielding, particularly under conditions of good moisture and nutrient supply. However, as both moisture and nutrient availability becomes more limiting, yield tends to decline. Short growing season maize cultivars could yield more than long season counterparts because they can maximize the growing season and potentially reach the critical flowering stage before traditional midsummer droughts occur. The short growing season maize cultivars, which have only recently been developed, have traits, which can address the problem of reduced yield, which is ascribed to midsummer drought. There has been no previous effort to evaluate the effects of planting dates and plant densities on yield and yield components of these short and ultra-short growth period maize cultivars. This prompted research in the 2004/05 growing season. One field experiment was conducted at each of two selected areas (Bethlehem&Potchefstroom) in the “Maize Triangle” of South Africa. The aim was to evaluate the response of short and ultra-short growth period maize cultivars to planting dates and plant densities at two localities with distinct environmental conditions. The effects of planting date, plant density and cultivar on yield and yield components were investigated. Both yield and yield components were affected by planting date, plant density and cultivar at both localities. At both localities early and optimum planting dates as well as low and optimum plant densities promoted increases in yield components, which contributed to increased grain yield. As for the cultivars, PAN6017 proved to be the most consistent since it out-performed other cultivars in terms of both vegetative growth, yield components and grain yield at both localities. At both localities, plant height, leaf area index and dry matter yield were affected by both planting date and plant density, with optimum planting date and optimum plant density contributing to highest yield components and yield. PAN 6017 was superior to the other cultivars at all planting dates and plant densities at both localities. In order to make findings from a study such as this applicable to the “Maize Triangle”, more research on short and ultra-short growth period maize cultivars should be conducted over a wider range of locations and seasons. / Dissertation (M Inst Agrar (Agronomy))--University of Pretoria, 2007. / Plant Production and Soil Science / M Inst Agrar / unrestricted

Thesis (Ph.D. Agriculture (Plant Production)) -- University of Limpopo, 2022 / Livestock has evolved to serve as the foundation and backbone of human well-being, and it is an important component of South Africa's agricultural sector. The small stock such as sheep (Ovis aries) in Limpopo province has remained a significant and multifunctional livelihood strategy for the majority of the rural and resource-poor people. Factors such as population growth, urbanization, rising per capita income and changes in consumer tastes and preferences are all contributing to gradual increases in livestock product consumption and demand. According to the 2019 Abstract of Agricultural Statistics, South Africa is an importer of sheep and sheep products. If the sheep production industry in the province could pursue this opportunity and realize its full production potential then increased production could stimulate economic growth and development, particularly from the communal and smallholder sector. Objective one of the study seeks to describe the demographic and socio-economic characteristics of communal and smallholder sheep farmers, identify sheep feeding practices and describe the constraints that hinder the sustainable productive growth of communal and smallholder sheep systems. Data were collected from one hundred and twenty (120) sheep farmers using a structured questionnaire across three agro-ecological zones of Limpopo province. Results revealed that overall, the majority of sheep farmers were males (78%) and farmers were above 60 years old (48%). Mean sheep flock size differed significantly between communal (24.74) and smallholder (62.36) farmers. Indigenous crossbreeds were the dominant breed kept by communal (86%) and smallholder (77%) farmers. The majority of communal and smallholder farmers (90% and 96%, respectively) reared their sheep under an extensive system with rangelands as the main source of feed. As a result, they experience a critical feed gap during June and September, the mid-winter to early spring until the first rains. The findings of the study revealed that feed shortages and diseases were ranked as the first and second production constraints by sheep farmers in both the production systems. In rangeland-dependent feeding systems, insufficient feed to meet animal demands create a feed gap, which is a critical factor that limits sheep productivity and causes xxi land degradation through overgrazing. Improved forages have been widely advocated as a critical step toward resolving this challenge. However, the adoption and utilization of improved technologies such as on-farm forage legume production by these farmers have been very low, contributing to the province's low sheep productivity. An extension of objective one of this study used primary data which was collected from a sample of 120 sheep farmers to determine the factors that influence the adoption of on-farm forage legume production and the perceived barriers to adoption by communal and smallholder sheep farmers in the Limpopo province. A Probit regression model and Principal Component Analysis (PCA) were used to analyze the data. The study revealed that the adoption of on-farm forage production by communal and smallholder sheep farmers is influenced by several factors, including gender, farming experience, knowledge of forage legume production, source of income, membership in farmer associations, access to extension services and farm size. Farmer perceived barriers to adoption of on-farm forage legume production identified by this study were low institutional support, lack of resources, lack of knowledge, shortage of water and objectives of the farmer. It is therefore recommended that intensive and high-quality extension support in partnership with industry associations and stakeholders is required for communal and smallholder farmers to improve forage technology awareness, training and promote on-farm forage production to transform communal and smallholder sheep feeding practices. In the face of climate change, identifying forage species with a high potential to mitigate winter feed gap challenges under more variable climatic conditions is critical. Trifolium and Vicia species are forage legumes well known for producing high-quality forage, particularly protein, which is deficient in the majority of feed resources used for sheep feeding during the winter season. Climate change-induced stresses from rising temperatures, which these winter annual forage legumes are likely to face, necessitate agronomic and breeding approaches to improve their adaptability. Lack of knowledge on how these climate change mitigation approaches influence the productivity of winter annual forage legumes in the Pietersburg Plateau of Limpopo province prompted objective two of this study. A three-year field experiment laid in a split-split plot design with four replications was conducted to measure the effects of planting date, cultivar and harvest stage on the physiological traits associated with biomass production, forage quality, nodulation activity and xxii nutritive value of annual clover and vetch species. The results showed that the planting date and harvest stage had a significant effect on leaf gaseous exchange and biomass production. A non-significant effect of planting date on nutritive value was observed. Intercellular CO2 concentration, transpiration rate, stomatal conductance, instantaneous water use efficiency and intrinsic water use efficiency in cultivars increased with delayed planting, while a decrease in photosynthetic rate, shoot DM, root DM and nodule DM was observed. Overall among the cultivars, Resal, Alex, Elite, Laser and Dr Baumans showed more consistency in terms of leaf gaseous exchange, biomass production and quality traits under planting date 1 and varying harvest stages. Investment in the year-round fodder flow establishment with high-quality forages is important in supporting sustainable sheep production. Forage legume-grass rotation systems are important not only for green fodder production of high crude protein, mineral and vitamin content throughout the year but also for enhanced soil fertility to reduce the nitrogen (N) fertilizer requirements. Accurate estimates of forage yields on the farm are required for fodder flow planning to ensure the seasonal distribution of fodder throughout the year. Objective three of the study was a no-tillage, short-term rotation experiment conducted to determine the growth and nutritive value of forage sorghum, planted after the winter annual forage legumes in combination with nitrogen application and to validate the performance of the APSIM-grain sorghum crop model in simulating forage sorghum growth and biomass production under different N rates. The treatments were planting date (January and February) and N source from inorganic N fertilizer (0 kg N ha-1, 60 kg N ha-1, 120 kg N ha-1, 180 kg N ha-1) and forage legume N residues (Alex, Capello, Dr Baumans, Elite, Hanka, Laser, Linkarus, Opolska, Resal and Timok) arranged in a randomized complete block design with four replicates. The findings of this study showed a significant response of forage sorghum growth and nutritive value to planting date. Delayed planting reduced plant height (11%), stem diameter (18%), LAI (6.7%), chlorophyll content (18%), NDVI (2.5%), photosynthetic rate (38%) and biomass production (8%). Delayed planting further reduced crude protein, acid detergent fiber and N yield. Nitrogen source from inorganic N at 60 kg N ha-1, 120 kg N ha-1, 180 kg N ha-1 and residual N from annual clover and vetch cultivars had a significant effect on morphological, physiological, yield and nutritive value parameters of forage sorghum. xxiii Generally, legume N residue effects on all the studied parameters of forage sorghum were similar to the inorganic N fertilizer of 60 kg N ha-1. However, the effects differed widely according to the species and cultivar of the legume. Resal, Laser, Elite Capello and Dr Baumans N residue consistently showed greater effects than other legume residues. They consistently outperformed inorganic 60 kg N ha-1 on the most measured parameters. The results confirm that annual clover-forage sorghum and vetch-forage sorghum rotation have huge potential to reduce the cost and negative environmental effects associated with inorganic N use in forage prediction systems. Regarding the evaluation of the potential of the APSIM grain legume model to simulate forage legume DM and plant height, in general, the model performed well and accurately in predicting the shoot dry matter accumulation and plant height under 0 kg N ha-1, 60 kg N ha-1 and 120 kg N ha-1. However, it underestimated both these parameters at 180 kg N ha-1 implying that the application of N up to 180 kg N ha-1 is not necessary. APSIM-grain module was able to accurately predict forage biomass production under N rates up to 120 kg N ha-1 and it is therefore considered reliable to support the N nutrition in the forage sorghum fodder production systems. / University of Limpopo, research office under the UCDP program and National Research Foundation-Thuthuka

No description available.

No description available.

African leafy vegetables have been shown and suggested to have potential to contribute to human diets and alleviate malnutrition; however, their levels of utilisation are currently low especially in South Africa. This is because there is limited access to these crops due to low availability in the market. Limited access is attributed, in part, to the lack of commercialisation as a result of limited agronomic information describing optimum management options for these leafy vegetables. Availability of such information would contribute to successful commercialisation of these crops. The primary objective of this study was to establish optimum agronomic management factors for Amaranthus cruentus, Corchorus olitorius, Vigna unguiculata and Brassica juncea for irrigated commercial production in South Africa. Seeds of Amaranthus cruentus, Corchorus olitorius were obtained from the Agricultural Research Council seed bank; Vigna unguiculata were obtained from Hydrotech and Brassica juncea seeds were obtained from Stark Ayres. The project consisted of three field studies whose overall objective was to evaluate growth and yield responses of the selected African leafy vegetables to agronomic factors under irrigated commercial production. These field studies comprised of two single factors; summer trials (planting density and nitrogen on three selected crops) and a combined winter trial (nitrogen, irrigation, plant density and planting date on a winter crop). Chapter three (3) investigated the effect of plant density on growth, physiology and yield responses of Amaranthus cruentus, Corchorus olitorius and Vigna unguiculata to three plant densities under drip irrigated commercial production. The plant density levels of 100 000, 66 666 and 50 000 plants/ha were used in the 2011/12 and 2012/13 summer seasons. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Amaranthus cruentus and Corchorus olitorius showed better leaf quality at lower plant density of 50 000 plants ha-1 than at 66 666 plants ha-1 and 100 000 plants ha-1. These results are based on bigger leaves expressed as leaf area index (LAI), better colour expressed as chlorophyll (CCI) and higher biomass per plant observed in these crops at 50 000 plants ha-1 in comparison to 66 666 plants ha-1 and 100 000 plants ha-1. In Vigna unguiculata there were no responses observed in LAI and CCI. In Amaranthus cruentus, Corchorus olitorius and Vigna unguiculata fresh and dry mass yield of leaves were higher at 100 000 plants ha-1 compared to other treatments. In A. cruentus and C. olitorius, higher leaf quality parameters (CCI, plant height, leaf number, biomass per plant and LAI) indicated that these crops can perform better at lower densities of 50 000 than at 66 666 plants ha-1 and 100 000 plants ha-1 Therefore, using 50 000 plants ha- 1 is suitable for commercial production of A. cruentus and C. olitorius. In Vigna unguiculata, a plant density of 100 000 plants ha-1 produced the highest fresh and dry mass per unit area without compromising quality in terms of the leaf size (LAI) and colour (CCI). Therefore 100 000 plants ha-1 is a density recommended for commercial production in V. unguiculata.Chapter four (4) was conducted to investigate growth, physiology and yield responses of A. cruentus, C. olitorius and V unguiculata to nitrogen application under drip irrigated commercial production. Three nitrogen treatments levels were used viz. 0, 44 and 88 kg N ha- 1 in 2011/12 season and four nitrogen treatments levels viz. 0, 50, 100 and 125 kg N ha-1 were used in 2012/13 summer season. The nitrogen levels selected for each season were based on recommendations for Amaranthaceae species, Swiss chard (Beta vulgaris L.var cicla) derived from soil analysis of the trial (field) site. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Results showed that application of nitrogen at 44 kg N ha- 1 in 2011/12 summer season and 100 kg N ha-1 in 2012/13 summer season improved LAI, CCI, biomass per plants and yield in A. cruentus. A similar trend was observed in C. olitorius except that 44 kg N ha-1 improved stem fresh yield. Further increase in nitrogen fertiliser above 44 kg N ha-1 during the 2011/12 season and above 100 kg N ha-1 in 2012/13 summer season reduced leaf quality and yield in both crops. In V. unguiculata, nitrogen application showed a slight increase in yield values from 0 to 44 kg N ha-1 followed by decrease at 88 kg N ha-1 in 2011/12 summer season; however, this increase in yield was not significant. During the 2012/13 summer season, yield in terms of fresh weight was significantly (P<.001) reduced by applying nitrogen at various levels. However, leaf dry matter content increased significantly (P<.001) with increase in nitrogen from 0 kg up to 100 kg N ha-1, then remained unchanged at 125 kg N ha-1. Therefore, the current study recommends that C. olitorius and A. cruentus could be commercialised at 44 kg N ha-1 and 100 kg N ha-1 which were lower nitrogen application rates than those recommended for Amaranthaceae species. In V. unguiculata, 50 kg N ha-1 improved leaf number; however, this did not translate to any fresh yield advantage, implying that the optimum rate for nitrogen application might be lower than 50 kg N ha-1. Therefore, nitrogen rates less than the ones used in the current study are recommended for V. unguiculata. Chapter five (5) was conducted in winter and it was necessitated by observations made primarily in the previous studies which focused on the effects of single factors such as plant density, planting date and nitrogen deficits. Therefore, there was a need to address interactions between irrigation, nitrogen, spacing and planting date. The objective of this study was to evaluate growth, physiology and yield responses of Brassica juncea to different agronomic and management factors in the 2012 and 2013 seasons. The treatments were as follows: two planting dates in main plot (1 June and 18 July, 2012); two irrigation frequency in sub main plot (once and three times a week); three nitrogen levels (0, 50, 100 kg N ha-1) and three plant densities (133 333, 80 000, 50 000 plants ha-1) as subplots. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Results from this study showed a significant interaction effect on plant height, LAI, CCI and CF. Crops irrigated thrice or once a week with 50 kg N ha-1 combined with 50 000 plants ha-1 produced tall plants and bigger leaves (LAI) in the early planting date (1 June) compared to other combinations. Irrigating three times a week combined with nitrogen application at 100 or 50 kg N ha-1 improved CF for late planting date (18 July) in comparison to other combinations. Irrigating once a week combined with nitrogen application at 100 kg N ha-1 increased CCI. There was no significant interaction effect on yield. Application of nitrogen at 50 and 100 kg N ha-1 significantly (P>0.05) increased yield in early and late planting dates compared to the control (0 kg N ha-1), in 2012 and 2013 winter season. Irrigating three times a week led to a significant (P<0.05) increase in yield in the late planting date (18th July) and early planting date (1st June) in 2013 season. Higher plant density of 133 333 plants ha-1 resulted in significantly (P<0.05) higher yield in terms of fresh mass and leaf number in the late planting date 18 July in 2012 and 2013 seasons. However, leaf quality parameters such as leaf size and colour was compromised at 133 333 plants ha-1 relative to 50 000 plants ha-1. Therefore, farmers are recommended to plant early, apply 50 kg N ha-1, irrigate thrice a week and utilise a spacing of 50 000 plants ha-1. The current study indicates that growth and yield of traditional leaf vegetables can be optimised through improved agronomic practise. / Agriculture and Life Sciences / D. Litt. et. Phil. (Agriculture)

African leafy vegetables have been shown and suggested to have potential to contribute to human diets and alleviate malnutrition; however, their levels of utilisation are currently low especially in South Africa. This is because there is limited access to these crops due to low availability in the market. Limited access is attributed, in part, to the lack of commercialisation as a result of limited agronomic information describing optimum management options for these leafy vegetables. Availability of such information would contribute to successful commercialisation of these crops. The primary objective of this study was to establish optimum agronomic management factors for Amaranthus cruentus, Corchorus olitorius, Vigna unguiculata and Brassica juncea for irrigated commercial production in South Africa. Seeds of Amaranthus cruentus, Corchorus olitorius were obtained from the Agricultural Research Council seed bank; Vigna unguiculata were obtained from Hydrotech and Brassica juncea seeds were obtained from Stark Ayres. The project consisted of three field studies whose overall objective was to evaluate growth and yield responses of the selected African leafy vegetables to agronomic factors under irrigated commercial production. These field studies comprised of two single factors; summer trials (planting density and nitrogen on three selected crops) and a combined winter trial (nitrogen, irrigation, plant density and planting date on a winter crop). Chapter three (3) investigated the effect of plant density on growth, physiology and yield responses of Amaranthus cruentus, Corchorus olitorius and Vigna unguiculata to three plant densities under drip irrigated commercial production. The plant density levels of 100 000, 66 666 and 50 000 plants/ha were used in the 2011/12 and 2012/13 summer seasons. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Amaranthus cruentus and Corchorus olitorius showed better leaf quality at lower plant density of 50 000 plants ha-1 than at 66 666 plants ha-1 and 100 000 plants ha-1. These results are based on bigger leaves expressed as leaf area index (LAI), better colour expressed as chlorophyll (CCI) and higher biomass per plant observed in these crops at 50 000 plants ha-1 in comparison to 66 666 plants ha-1 and 100 000 plants ha-1. In Vigna unguiculata there were no responses observed in LAI and CCI. In Amaranthus cruentus, Corchorus olitorius and Vigna unguiculata fresh and dry mass yield of leaves were higher at 100 000 plants ha-1 compared to other treatments. In A. cruentus and C. olitorius, higher leaf quality parameters (CCI, plant height, leaf number, biomass per plant and LAI) indicated that these crops can perform better at lower densities of 50 000 than at 66 666 plants ha-1 and 100 000 plants ha-1 Therefore, using 50 000 plants ha- 1 is suitable for commercial production of A. cruentus and C. olitorius. In Vigna unguiculata, a plant density of 100 000 plants ha-1 produced the highest fresh and dry mass per unit area without compromising quality in terms of the leaf size (LAI) and colour (CCI). Therefore 100 000 plants ha-1 is a density recommended for commercial production in V. unguiculata.Chapter four (4) was conducted to investigate growth, physiology and yield responses of A. cruentus, C. olitorius and V unguiculata to nitrogen application under drip irrigated commercial production. Three nitrogen treatments levels were used viz. 0, 44 and 88 kg N ha- 1 in 2011/12 season and four nitrogen treatments levels viz. 0, 50, 100 and 125 kg N ha-1 were used in 2012/13 summer season. The nitrogen levels selected for each season were based on recommendations for Amaranthaceae species, Swiss chard (Beta vulgaris L.var cicla) derived from soil analysis of the trial (field) site. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Results showed that application of nitrogen at 44 kg N ha- 1 in 2011/12 summer season and 100 kg N ha-1 in 2012/13 summer season improved LAI, CCI, biomass per plants and yield in A. cruentus. A similar trend was observed in C. olitorius except that 44 kg N ha-1 improved stem fresh yield. Further increase in nitrogen fertiliser above 44 kg N ha-1 during the 2011/12 season and above 100 kg N ha-1 in 2012/13 summer season reduced leaf quality and yield in both crops. In V. unguiculata, nitrogen application showed a slight increase in yield values from 0 to 44 kg N ha-1 followed by decrease at 88 kg N ha-1 in 2011/12 summer season; however, this increase in yield was not significant. During the 2012/13 summer season, yield in terms of fresh weight was significantly (P<.001) reduced by applying nitrogen at various levels. However, leaf dry matter content increased significantly (P<.001) with increase in nitrogen from 0 kg up to 100 kg N ha-1, then remained unchanged at 125 kg N ha-1. Therefore, the current study recommends that C. olitorius and A. cruentus could be commercialised at 44 kg N ha-1 and 100 kg N ha-1 which were lower nitrogen application rates than those recommended for Amaranthaceae species. In V. unguiculata, 50 kg N ha-1 improved leaf number; however, this did not translate to any fresh yield advantage, implying that the optimum rate for nitrogen application might be lower than 50 kg N ha-1. Therefore, nitrogen rates less than the ones used in the current study are recommended for V. unguiculata. Chapter five (5) was conducted in winter and it was necessitated by observations made primarily in the previous studies which focused on the effects of single factors such as plant density, planting date and nitrogen deficits. Therefore, there was a need to address interactions between irrigation, nitrogen, spacing and planting date. The objective of this study was to evaluate growth, physiology and yield responses of Brassica juncea to different agronomic and management factors in the 2012 and 2013 seasons. The treatments were as follows: two planting dates in main plot (1 June and 18 July, 2012); two irrigation frequency in sub main plot (once and three times a week); three nitrogen levels (0, 50, 100 kg N ha-1) and three plant densities (133 333, 80 000, 50 000 plants ha-1) as subplots. Parameters measured included chlorophyll content index (CCI), chlorophyll fluorescence (CF), stomatal conductance (SC), leaf number, leaf area index (LAI) and biomass. Results from this study showed a significant interaction effect on plant height, LAI, CCI and CF. Crops irrigated thrice or once a week with 50 kg N ha-1 combined with 50 000 plants ha-1 produced tall plants and bigger leaves (LAI) in the early planting date (1 June) compared to other combinations. Irrigating three times a week combined with nitrogen application at 100 or 50 kg N ha-1 improved CF for late planting date (18 July) in comparison to other combinations. Irrigating once a week combined with nitrogen application at 100 kg N ha-1 increased CCI. There was no significant interaction effect on yield. Application of nitrogen at 50 and 100 kg N ha-1 significantly (P>0.05) increased yield in early and late planting dates compared to the control (0 kg N ha-1), in 2012 and 2013 winter season. Irrigating three times a week led to a significant (P<0.05) increase in yield in the late planting date (18th July) and early planting date (1st June) in 2013 season. Higher plant density of 133 333 plants ha-1 resulted in significantly (P<0.05) higher yield in terms of fresh mass and leaf number in the late planting date 18 July in 2012 and 2013 seasons. However, leaf quality parameters such as leaf size and colour was compromised at 133 333 plants ha-1 relative to 50 000 plants ha-1. Therefore, farmers are recommended to plant early, apply 50 kg N ha-1, irrigate thrice a week and utilise a spacing of 50 000 plants ha-1. The current study indicates that growth and yield of traditional leaf vegetables can be optimised through improved agronomic practise. / Agriculture and Life Sciences / D. Litt. et. Phil. (Agriculture)

Strategies to improve stem yield and juice quality in sweet sorghum were investigated in this study. Seed quality of sixty five accessions (landraces) from Botswana was investigated. Standard germination tests revealed that only 66% of the accessions had germination percentages in excess of 85%. The Accelerated Ageing test showed that only 50%of the 26 accessions had germination percentages above 80%. The results indicated that Botswana sweet sorghum seed quality is generally poor. Seed development and maturity observations demonstrated that maximum seed quality occurred 14 to 17 days after mass maturity (physiological maturity) and this coincided with maximum seed germination. These results suggest that harvesting sweet sorghum seed prior to mass maturity can lower seed quality. Farmers should, therefore be advised to select plants intended for seed harvesting and allow them to mature properly before the seeds are harvested. Differences in seed colour, shape and compactness of the inflorescences were observed amongst the 65 landraces collected from farmers in Botswana. Ten landraces were characterised and from the results it was evident that there was a range of genetic diversity which can be utilized in the improvement of the crop. Large panicles were characteristic of most sweet sorghum landraces, the effect of tiller, panicle and floret removal on juice quality was consequently studied. Removal of panicles and florets significantly improved juice quality whilst removal of tillers did not. Selection and breeding of genotypes with small panicles and male sterile varieties may improve juice quality and should be investigated. Effect of planting date, spacing and nitrogen were investigated. Early planting (October) resulted in increased stem yields but reduced juice quality. A 30 cm intra-row spacing resulted in high stem yields per plant and good juice quality. Nitrogen fertilisation increased stem yield and improved juice quality. On the bases of the results obtained from this study, early planting (October), application of 60 kg N ha-¹, and 30 cm intra-row spacing could be recommended for sweet sorghum production in pure stands. In pure stands yields of more than 37 000 stems (per hectare) of good quality can be attained. These could be sold at an estimated price of P2.00 (R2.25) per stem indicating the potential of sweet sorghum as a cash crop. However, its economic viability depends on the price elasticity in the supply - demand function. / Dissertation (PHD)--University of Pretoria, 2003. / Plant Production and Soil Science / unrestricted