Mounted ill. Offprint of the author's journal article in pocket. Includes bibliographies.

published_or_final_version / Botany / Master / Master of Philosophy

Urban soils are often contaminated with trace metals and the toxicity of the metals depends, in part, on their speciation in soil solutions. The objectives of this project were to estimate the metal speciation in urban soils and to evaluate the predictability of soil metal pools on plant uptake. The chemical speciation of Cd, Cu, Ni, Pb and Zn was estimated by using the Windermere Humic Aqueous Model (WHAM). In soil solutions, Cd, Ni and Zn were present mainly as free ions when the solutions were acidic and their organic complexes were dominant as the pH was over 7.5. The other two metals mostly formed complexes with organic ligands. The activities of Cd2+, Cu2+, Ni2+, Pb2+ and Zn 2+ were affected by soil pH and total soil metal burdens. All five metals were under-saturated with respect to the minerals which could potentially control the metal solubility. / Metal uptake by plants in the contaminated railway yards was generally not correlated with free, dissolved and total soil metal pools. A pot experiment demonstrated better correlations between the metal pools and the metal content in wild chicory. Multiple regression analysis showed that the metals in the leaves and roots of wild chicory could be adequately predicted by the soil total metals and soil properties such as pH and exchangeable Ca.

Mounted ill. / Offprint of the author's journal article in pocket / Includes bibliographies / xiii, 248 leaves, [50] leaves of plates, [3] folded leaves : ill. (some col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Thesis (Ph.D.)--University of Adelaide, 1985

No description available.

This thesis is part of a broader project that examines three different approaches to evaluating trace metal contamination in urban brownfields: the measure of total soil metals; calculating bioavailable metals; and the use of species as bioindicators of trace metals in soils. Chapter 1 discusses the problems inherent in each approach such as; inconsistent results due to differences in techniques, extrapolation from laboratory to field, and the influence of species differences and environmental conditions. Chapter 2 is a site description measuring biodiversity, community structure and activity of three urban brownfields. The site description was used to select organisms that were subsequently evaluated for their usefulness as bioindicators of trace metals (chapter 3). Of the three plant species used (dandelion, bladder campion, and chicory), dandelion has the possibility of being a suitable bioindicator of Cd, Ni, and Zn, while bladder campion may be suitable for evaluating Cd, Ni, Pb, and Zn.

No description available.

Due to mining activities, the natural vegetation cover in Gatumba area was removed and replaced either by crops or bare wasteland with reduced available arable land. The main aim of the study was to assess the impact of the mining activities on the plant mineral uptake and the dynamics of the vegetation. The vegetation in this area under investigation was diversified and heterogeneous. Trace element concentrations in soils were similar to those in plant parts but some elements were highly concentrated in soils than in plants. According to the bioaccumulation factors of the analyzed trace elements in plant parts, two categories of plants were identified, and these are excluders and accumulators. No toxic levels of the evaluated trace elements were found in the analyzed plant samples. As a recommendation for the adaptation of plants to Gatumba mining environment, the most useful plant species for the revegetation/restitution of the technosols should be Sesbania sesban, Crotalaria dewildemaniana and Tithonia diversifolia subject to further experiments on trace elements bioaccumulation and organic matter production / Environmental Sciences / M.A. Science (Environmental Sciences)

M. Tech. (Department of Chemical Engineering, Faculty of Engineering and Technology), Vaal University of Technology / Fenton oxidation is classified into two processes, homogeneous and heterogeneous. Homogeneous Fenton oxidation process, have been shown to be efficient in the degradation of organic pollutants. However, it was shown to have limitations which can be addressed by the heterogeneous Fenton oxidation. Despite the high efficiency of the heterogeneous Fenton oxidation process in the degradation of recalcitrant organic pollutants, the currents synthesis trends of the heterogeneous Fenton catalyst have been proven to be time and energy constraining, since it involves the multi-step were the activated carbon have to be prepared first then co-precipitate the iron oxide on the activated carbon. However, as much as the heterogeneous Fenton catalyst has been proven to have high catalytic activity towards degradation of organic pollutants, these catalysts have some limitations, such limitations include metal ions being leached from the catalyst support into the treated water causing catalyst deactivation and a secondary pollution to the treated water. In this thesis, these catalysts have been applied in the degradation of recalcitrant organic pollutants such as methylene blue and phenols. This study focuses on the single step synthesis of iron oxide nanoparticles supported on activated carbon, were carbonaceous material is impregnated with iron salt then pyrolysed via microwave heating. Microwave power and the amount of iron salt were optimized. The prepared activated carbon-iron oxide composites were applied to the degradation of 2-nitrophenol (2-NP) and methylene blue (MB). Methylene blue was used as a model compound due to the fact that it is easier to monitor the degradation process with UV-Vis as compared to 2-nitrophenol . 2-nitrophenol the additional step for the adjustment of pH is required since nitrophenols are colorless in color at lower pH. The characterization showed that the microwave power and the amount of the iron precursor have an influence on the porosity and surface functional groups of the activated carbon. Further it was vi observed that microwave power and iron precursor influnces the amount of iron oxide formed on the surface of the support. It was also observed that the activated carbon-iron oxide composite have the catalytic effects on the Fenton oxidation process of MB and 2-NP. The parameters such as H2O2, pH, catalyst dose, initial concentration, temperature affect the degradation of both MB and 2-NP. Kinetics studies showed that Fenton is a surface driven reaction since the results fitted the pseudo first order model. The thermodynamics parameters also showed that the reaction is endothermic, spontaneous and is randomized. This implies that the reaction of the degradation of MB and 2-NP is feasible and the catalysts prepared have high catalytic activity. MB and 2-NP were degraded to smaller organic molecules (carboxylic acids). The stability of the catalyst observed to decrease as the number of cycles increased, this is due to the leaching of iron ions from the support material. Hence it was concluded that the activated carbon-iron oxide composite was successfully synthesized and had the high catalytic activity for the degradation of MB and 2-NP.

Due to mining activities, the natural vegetation cover in Gatumba area was removed and replaced either by crops or bare wasteland with reduced available arable land. The main aim of the study was to assess the impact of the mining activities on the plant mineral uptake and the dynamics of the vegetation. The vegetation in this area under investigation was diversified and heterogeneous. Trace element concentrations in soils were similar to those in plant parts but some elements were highly concentrated in soils than in plants. According to the bioaccumulation factors of the analyzed trace elements in plant parts, two categories of plants were identified, and these are excluders and accumulators. No toxic levels of the evaluated trace elements were found in the analyzed plant samples. As a recommendation for the adaptation of plants to Gatumba mining environment, the most useful plant species for the revegetation/restitution of the technosols should be Sesbania sesban, Crotalaria dewildemaniana and Tithonia diversifolia subject to further experiments on trace elements bioaccumulation and organic matter production / Environmental Sciences / M.A. Science (Environmental Sciences)