Abstract The work deals with the experimental study of ferroelectric (FE) performance scaling for nanometer-sized devices. In the emerging and advanced devices, it is desirable to couple FE performance with other functions. This requires integration of nanoscale FEs with other materials, which is especially promising in epitaxial heterostructures. Such heterostructures inevitably possess a large lattice mismatch, the effect of which on FE properties is unknown and is in the focus of the present work. In the study, heteroepitaxial thin and ultrathin films and superlattices of ABO3-type perovskite structure FEs were used, with A = Pb, Ba, Sr, K, and N, and B = Ti, Zr, Nb, and Ta. FE domains and local polarization switching were explored on the nanometer scale using piezoresponse force microscopy. The experiment was modified that allowed achieving images with high contrast and lateral resolution, and also allowed analysis of nanodomains in lateral capacitor configuration. Local properties were related to a macroscopic response. For this, the method of simultaneous on-wafer low-frequency impedance measurements was optimized allowing studies of thin and ultrathin (to 5 nm) films in a broad range of conditions and regimes. Experimental studies have reveled phenomena which cannot be explained in the frame of the existing theories. The observed new effects are important for applications such as multistate memory devices, storage capacitors, and FE tunnel junction devices.

No description available.

No description available.

No description available.

The need to exploit the large fibre bandwidth and increase the reach has seen the application of the Raman fibre amplifier (RFA) become indispensable in modern light wave systems. The success and resilience of RFAs in optical communication is deeply rooted in their unique optical properties and new technologies which have allowed the amplifier to come of age. However, the full potential of RFAs in optical communication and other applications are yet to be realized. More so are its polarization properties which still remain largely unexploited and have not been fully understood. In this work, fundamental issues regarding distributed RFA have been investigated with the aim of acquiring a better understanding of the amplifier polarization characteristics which have potential applications. In particular the effects of polarization mode dispersion (PMD) and polarization dependent loss (PDL) have been demonstrated both by simulation and experiment. The possibility of Raman polarization pulling in single mode fibres (SMFs) has also been addressed. Polarization sensitivity of RFA has been known for a long time but the clear manifestation of it has become evident in the advent of modern low PMD fibre. Unlike EDFAs which make use of special doped fibre, RFAs require no special fibre for operation. Besides, RFA uses a very long length of fibre and as such the fibre polarization characteristics come into play during amplification. In the demonstrations presented in this thesis a fibre of PMD coefficient < 0.05 pskm-1/2 was regarded as low PMD fibre while one having coefficient ≥ 0.05 pskm-1/2 was categorized to have high PMD unless otherwise stated. Several experiments were performed to evaluate the RFA gain characteristics with respect to fibre PMD and the system performance in the presence of noise emanating from amplified spontaneous emission (ASE). Analysis of Raman gain statistics was done for fibres of low and high PMD coefficients. The statistics of PDG and on-off gain were eventually used to demonstrate the extraction of PMD coefficients of fibres between 0.01- 0.1 pskm-1/2 using a forward pumping configuration. It was found that, at increasing pump power a linear relationship exists between forward and backward signal gain on a dB scale. The interaction of PDL and Raman PDG in the presence of PMD were observed at very fundamental level. It was found the presence of PDL serves to reduce the available on-off gain. It was also established that the presence of PMD mediates the interaction between PDG/PDL. When PMD is high it reduces PDG but the presence of PDL introduces a wavelength dependent gain tilting for WDM channels. Further analysis revealed that signal polarization is influenced by the pump SOP due to the pulling effect which is present even at moderate pump power.

This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.

Introduction: Increased activation of inflammatory pathways is associated with elevated metabolic stress, which leads to a constellation of metabolic pathologies like fatty liver, insulin resistance and atherosclerosis. Interferon regulatory factor 2 binding protein 2 (IRF2BP2) is a novel transcription co-factor that binds to and inhibits two main pro-inflammatory transcription factors, IRF2 and NFAT1. IRF2BP2 genetic variants are also linked to increased human serum cholesterol level in GWAS studies. Therefore, we hypothesized that IRF2BP2 may inhibit macrophage polarization to pro-inflammatory phenotype and considering the remarkable overlap between inflammatory and metabolic sensors, alter their metabolic function. We sought to determine if specific ablation IRF2BP2 in the mouse myeloid lineage (IRF2BP2MKO) leads to development of metabolic symptoms and alters the risk of atherosclerosis. Results: Our results indicate that IRF2BP2 ablation impairs macrophage polarization to the anti-inflammatory phenotype. IRF2BP2MKO bone marrow derived macrophages (BMDM) show increased oxidized LDL-cholesterol uptake and decreased cholesterol efflux. Also, mice with specific ablation of IRF2BP2 in macrophages are more susceptible to obesity, insulin resistance and hepatic steatosis compared to control mice, when fed high fat diet (HFD). However, LDLR-/- mice transplanted with IRF2BP2MKO bone marrow demonstrate similar extent of atherosclerotic lesions compared to LDLR-/- mice transplanted with control bone marrow, reflecting increased IRF2BP2MKO macrophage apoptosis. Conclusion: In conclusion, this is the first study to identify the metabolic and inflammatory functions of IRF2BP2 protein in macrophages, with important implications in metabolic syndrome and atherosclerosis.

The capability to map anthropogenic aerosol quantities and properties over land can provide significant insights for climate and environmental studies on global and regional scales. One of the primary challenges in aerosol information monitoring is separating two signals measured by downward-viewing airborne or spaceborne instruments: the light scattered from the aerosols and light reflected from the Earth's surface. In order to study the aerosols independently, the surface signal needs to be subtracted out from the measurements. Some observational modalities, such as multispectral and multiangle, do not provide enough information to uniquely define the Earth's directional reflectance properties for this task due to the high magnitude and inhomogeneity of albedo for land surface types. Polarization, however, can provide additional information to define surface reflection. To improve upon current measurement capabilities of aerosols over urban areas, Jet Propulsion Laboratory developed the Multiangle SpectroPolarimetric Imager (MSPI) that can accurately measure the Degree of Linear Polarization to 0.5%. In particular, data acquired by the ground-based prototype, GroundMSPI, is used for directional reflectance studies of outdoor surfaces in this dissertation. This work expands upon an existing model, the microfacet model, to characterize the polarized bidirectional reflectance distribution function (pBRDF) of surfaces and validate an assumption, the Spectral Invariance Hypothesis, on the surface pBRDF that is used in aerosol retrieval algorithms. The microfacet model is commonly used to represent the pBRDF of Earth's surface types, such as ocean and land. It represents a roughened surface comprised of randomly oriented facets that specularly reflect incoming light into the upward hemisphere. The analytic form of the pBRDF for this model assumes only a single reflection of light from the microfaceted surface. If the incoming illumination is unpolarized, as it is with natural light from the Sun, the reflected light is linearly polarized perpendicular to the plane that contains the illumination and view directions, the scattering plane. However, previous work has shown that manmade objects, such as asphalt and brick, show a polarization signature that differs from the single reflection microfacet model. Using the polarization ray-tracing (PRT) program POLARIS-M, a numerical calculation for the pBRDF is made for a roughened surface to account for multiple reflections that light can experience between microfacets. Results from this numerical PRT method shows rays that experience two or more reflections with the microfacet surface can be polarized at an orientation that differs from the analytical single reflection microfacet model. This PRT method is compared against GroundMSPI data of manmade surfaces. An assumption made regarding the pBRDF for this microfacet model is verified with GroundMSPI data of urban areas. This is known as the Spectral Invariance Hypothesis and asserts that the magnitude and shape of the polarized bidirectional reflectance factor (pBRF) is the same for all wavelengths. This simplifies the microfacet model by assuming some surface parameters such as the index of refraction are spectrally neutral. GroundMSPI acquires the pBRF for five prominent region types, asphalt, brick, cement, dirt, and grass, for day-long measurements on clear sky conditions. Over the course of each day, changing solar position in the sky provides a large range of scattering angles for this study. The pBRF is measured for the three polarimetric wavelengths of GroundMSPI, 470, 660, and 865nm, and the best fit slope of the spectral correlation is reported. This investigation shows agreement to the Spectral Invariance Hypothesis within 10% for all region types excluding grass. Grass measurements show a large mean deviation of 31.1%. This motivated an angle of linear polarization (AoLP) analysis of cotton crops to isolate single reflection cases, or specular reflections, from multiple scattering cases of light in vegetation. Results from this AoLP method show that specular reflections off the top surface of leaves follow the Spectral Invariance Hypothesis.

Astronomical instruments dedicated to the study of Cosmic Microwave Background polarization are in need of optics with very low systematic effects such as beam shape and cross-polarization in an optical configuration. With the demand for millimetre wave larger focal planes comprising thousands of pixels, these systematic effects have to be minimal across the whole focal surface. In order to reach the instrument requirements such as resolution, cross-polarization and beam ellipticity, new optical configurations with well-understood components have to be studied. Refractive configurations are of great importance amongst the potential candidates. The aim is to bring the required technology to the same level of maturity that has been achieved with well-understood existing ones. This thesis is focused on the study of such optical components for the W-band spectral domain. Using optical modelling with various software packages, combined with the manufacture and accurate experimental characterization of some prototype components, a better understanding of their performance has been reached. To do so, several test set-ups have been developed. Thanks to these new results, full Radio-Frequency refractive systems can be more reliably conceived.

La méiose ovocytaire comprend une succession de deux divisions cellulaires, sans phase intermédiaire de réplication de l'ADN, permettant l'haploïdisation du gamète femelle en vue de la fusion des génomes parentaux lors de la fécondation. Le caractère fortement asymétrique de ces divisions permet l'expulsion du matériel génétique surnuméraire, dans de petits globules polaires, tout en conservant l'essentiel des ressources cytoplasmiques qui seront nécessaires au développement précoce de l'embryon. De nombreuses études réalisées sur l'ovocyte de souris ont mis en évidence les capacités intrinsèques du gamète à rompre sa symétrie en positionnant son fuseau de manière excentrée à proximité du cortex. En se positionnant de la sorte le fuseau induit, via un gradient de Ran-GTP porté par les chromosomes, une polarisation du cortex ovocytaire qui permettra de restreindre le site d'émission des futurs globules polaires. Cette polarisation se caractérise notamment par une forte accumulation de filaments d'actines dépendante du facteur de nucléation Arp2/3. Nos travaux nous ont permis de mettre en évidence le rôle de Cdc42-GTP, via l'activation de N-WASP, comme intermédiaire entre le gradient de Ran-GTP et la polymérisation polarisée des filaments d'actine. Nous nous sommes également intéressés à la localisation des protéines ERM (Ezrin Radixin Moesin), connues pour favoriser la formation des microvillosités membranaires. Dans l'ovocyte, les microvillosités et les ERM sont toutes deux exclues du cortex polarisé et nous avons pu démontrer le rôle de Ran-GTP dans ce processus. Enfin, nous avons étudié la localisation du réseau d'acto-myosine cortical lors de la deuxième division méiotique qui nécessite la rotation du fuseau de l'ovocyte de souris. Nos résultats révèlent l'existence de deux sous-populations de myosine 2 corticale, l'une dépendante de la chromatine (Ran-GTP/Cdc42-GTP) et l'autre dépendante du fuseau central (Ect2/RhoA). / Oocyte meiosis is accomplished through two successive rounds of cellular divisions, without DNA replication, allowing for gamete haploidization necessary for parental genome fusion after fertilization. These divisions are highly asymmetric and allow extra-DNA expulsion, in small polar bodies, while retaining most of the cytoplasmic resources needed for early embryo development. Studies in mouse oocyte have demonstrated the capabilities of the gamete to autonomously break his symmetry by positioning the spindle near the cortex. By doing so, the spindle is able to induce a cortical polarization that is dependent on a Ran-GTP gradient emanating from the chromosomes. This polarization will be necessary for delimiting extrusion sites of the future polar bodies. A polarized accumulation of Arp2/3 actin filaments is one of the most evident features of oocyte polarization. We have shown that polarization of Cdc42-GTP, trough N-WASP activation, is an essential intermediate between Ran-GTP and the polarized polymerization of actin filaments. We also investigated ERM (Ezrin Radixin Moesin) proteins localization that are known to promote microvilli assembly. According to our data, microvilli and ERM are excluded from the polarized cortex in a Ran-GTP dependent manner. Finally, we studied cortical acto-myosin dynamics during the second meiotic division which requires spindle rotation. We demonstrated the existence of two cortical myosin 2 sub-populations which depend either on chromosomes (Ran-GTP/Cdc42-GTP) or on the central spindle (Ect2/RhoA).