Thesis (Ph.D.)--Drexel University, 2009. / Includes abstract and vita. Includes bibliographical references (leaves 259-273).

Styrenic block copolymer thermoplastic elastomers are one of the most widely used thermoplastic elastomers (TPEs) today. The focus of this research is to fundamentally understand the structure-processs-property relationships in these materials. Deformation behavior of the block copolymers with cylindrical and lamellar morphologies has been investigated in detail using unique techniques like deformation calorimetry, transmission electron microscopy (TEM), combined in-situ small angle x-ray and wide angle x-ray scattering (SAXS/WAXS). The research involves the study of structural changes that occur at different length scales along with the energetics involved upon deformation. The structural changes in the morphology of these systems on deformation have been investigated using combined SAXS/WAXS setup. Small angle x-ray scattering probed the changes at the nano-scale of polystyrene (PS) cylinders, while wide angle x-ray scattering probed the changes at molecular length scales of the amorphous/crystalline domains of the elastomeric mid-block in these systems. TEM analysis of the crosslinked elastomers (by UV curing) further confirms the interpretation of structural details as obtained from SAXS upon deformation. New structural features at both these length scales have been observed and incorporated into the overall deformation mechanisms of the material. Characteristic structural parameters have been correlated to differences in their mechanical response in the commercially relevant cylindrical block copolymers. Effect of various process conditions and thermal treatments has been investigated. The process conditions affect the structure at both micro-scopic (grain size) and nano-scopic (domain size) length scales. A correlation has been obtained between a mechanical property (elastic modulus) and an easily measurable structural parameter (d-spacing). Effect of various phase transitions such as order-to-order transition has been studied. Selective solvents can preferentially swell one phase of the block copolymer relative to other and thus bring a change in morphology. Such kinetically trapped structures when annealed at higher temperature try to achieve their thermodynamic equilibrium state. Such changes in morphology significantly affect their tensile and hysteretic response. In another work it has been shown that by carefully compounding these styrenic block copolymers having different morphologies, it is possible to completely disrupt the local scale order and remove the grain boundaries present in these materials. Finally, a new test technique has been developed, by modifying an existing Charpy device to test polymeric films at a high strain rate. A custom designed load-cell is used for force measurements which imposes harmonic oscillations on a monotonic loading signal. The data obtained from this device can be used to analyze visco-elastic response of polymeric films at frequencies much higher than the conventional dynamic mechanical analyzer (DMA).

Inorganic-polymer hybrid materials have a high potential to enable major advances in material performance in a wide range of applications. This research focuses on characterizing and tailoring the physics and chemistry of inorganic-polymer interfaces in fabricating high-performance zeolite-polymer mixed-matrix membranes for energy-efficient gas separations. In addition, the topic of novel metal nanoparticle-coated polymer microspheres for optical applications is treated in the Appendix. In zeolite/polymer mixed-matrix membranes, interfacial adhesion and interactions between dope components (zeolite, polymer and solution) play a crucial role in determining interfacial morphology and particle dispersion. The overarching goal is to develop accurate and robust tools for evaluating adhesion and interactions at zeolite-polymer and zeolite-zeolite interfaces in mixed-matrix membrane systems. This knowledge will be used ultimately for selecting proper materials and predicting their performance. This project has two specific goals: (1) development of an AFM methodology for characterizing interfacial interactions and (2) characterization of the mechanical, thermal, and structural properties of zeolite-polymer composites and their correlation to the zeolite-polymer interface and membrane performance. The research successfully developed an AFM methodology to determine interfacial interactions, and these were shown to correlate well with polymer composite properties. The medium effect on interactions between components was studied. We found that the interactions between two hydrophilic silica surfaces in pure liquid (water or NMP) were described qualitatively by the DLVO theory. However, the interactions in NMP-water mixtures were shown to involve non-DLVO forces arising from bridging of NMP macroclusters on the hydrophilic silica surfaces. The mechanism by which nanostructured zeolite surfaces enhanced in zeolite-polymer interfacial adhesion was demonstrated to be reduced entropy penalties for polymer adsorption and increased contact area. ¡¡¡¡¡¡Metal nanoparticle (NP)-coated polymer microspheres have attracted intense interest due to diverse applications in medical imaging and biomolecular sensing. The goal of this project is to develop a facile preparation method of metal-coated polymer beads by controlling metal-polymer interactions. We developed and optimized a novel solvent-controlled, combined swelling-heteroaggregation (CSH) technique. The mechanism governing metal-polymer interaction in the fabrication was determined to be solvent-controlled heteroaggregation and entanglement of NPs with polymer, and the optical properties of the metal/polymer composite beads were shown to make them useful for scattering contrast agent for biomedical imaging and SERS (Surface-Enhanced Raman Scattering) substrates.

This research addresses and illuminates a little understood region of miscible polymer mixtures and demonstrates a new means of separating wax from such blends. The method, termed Deformation Induced Phase Segregation potentially eliminates need of toxic processing solvents for wax removal or recovery in these types of blends. Previous theories of polymer combinations address them exclusively as solutions or as blends, two independent classes having very different behaviors. This study provides bridge connecting these two classes by identifying crossover points between them and the behaviors exhibited therein. The blends of this form were found to be semi-miscible, forming a homogenous phase in the melt but a two-phase system in the solid, with the rheological behavior influenced by the polymer's molecular weight and architecture. It also demonstrates practical promise of this regime by introducing a mechanical compression process to separate the wax phase from such a type of blend. This process potentially permits production of ultra-high molecular weight polyethylene (UHMwPE) films and fibers by melt processing, thereby obviating need of otherwise essential but expensive and environmentally unfriendly toxic solvents.

No description available.

There are two general ways to introduce functionalities into a polymeric structure: functionalization of the monomeric units before polymerization and postfunctionalization of the preformed polymer. Building libraries of polymers with different functionalities can be completed with significantly less effort by the second method, as each postfunctionalization of a single batch of polymeric backbone can involve as little as one synthetic step. One method of building a polymeric backbone for postfunctionalization involves the synthesis of hyperbranched conjugated polymers (HCPs) from AB2 monomeric units. A polymer formed from n AB2 monomeric units should contain n reactive B groups, which act as sites of functionalization. Utilizing this principle, two different hyperbranched poly(phenylene vinylene-phenylene ethynylene) scaffolds were synthesized and studied in both their inherent properties and functionalization. The first HCP synthesized was compared against a monomeric cruciform model and a linear polymer with a similar structure. The hyperbranched polymer has red-shifted absorption and emission in comparison to the cruciform model and linear polymer. The HCP quenches paraquat more efficiently than the linear polymer by a factor of about two, suggesting a greater rate of energy transfer. The functionalization of HCPs was studied; iodine groups decorating the HCPs were replaced with terminal alkynes by Pd-catalyzed coupling, providing a library of 24 differently functionalized HCPs. Elemental analyses of the postfunctionalized polymers show nearly complete substitution of the iodine groups. The postfunctionalized polymers show increased fluorescence compared to the original iodine decorated polymers, due to the loss of the heavy atom effect inducing iodine groups. The emissions of the postfunctionalized polymers in solution show a strong dependence on the groups attached to the conjugated structures, with emission maxima ranging from 505 nm to 602 nm; quantum yields range from 0.7% to 25%. Solid-state emission studies show stronger and more red-shifted spectra compared to emissions observed in solution.