Non-contact life detection is a significant component of both civilian and military rescue applications. As a consequence, this interest has resulted in a very active area of research. The primary goal of this research is reliable detection of a human breathing signal. Additional goals of this research are to carry out detection under realistic conditions, to distinguish between two targets, to determine human breathing rate and estimate the posture. Range gating and Singular Value Decomposition (SVD) have been used to remove clutter in order to detect human breathing under realistic conditions. However, the information of the target range or what principal component contains target information may be unknown. DFT and Short Time Fourier Transform (STFT) algorithms have been used to detect the human breathing and discriminate between two targets. However, the algorithms result in many false alarms because they detect breathing when no target exists. The unsatisfactory performance of the DFT-based estimators in human breathing rate estimation is due to the fact that the second harmonic of the breathing signal has higher magnitude than the first harmonic. Human posture estimation has been performed by measuring the distance of the chest displacements from the ground. This requires multiple UWB receivers and a more complex system. In this thesis, monostatic UWB radar is used. Initially, the SVD method was combined with the skewness test to detect targets, discriminate between two targets, and reduce false alarms. Then, a novel human breathing rate estimation algorithm was proposed using zero-crossing method. Subsequently, a novel method was proposed to distinguish between human postures based on the ratios between different human breathing frequency harmonics magnitudes. It was noted that the ratios depend on the abdomen displacements and higher harmonic ratios were observed when the human target was sitting or standing. The theoretical analysis shows that the distribution of the skewness values of the correlator output of the target and the clutter signals in a single range-bin do not overlap. The experimental results on human breathing detection, breathing rate, and human posture estimation show that the proposed methods improve performance in human breathing detection and rate estimation.

Struck-by fatalities involving heavy equipment such as trucks and cranes accounted for 24.6% of the fatalities between 1997-2007 in the construction industry. Limited visibility due to blind spots and travel in reverse direction are the primary causes of these fatalities. Blind spots are spaces surrounding an equipment that are invisible to the equipment operator. Thus, a hazard is posed to the ground personnel working in the blind spaces of an equipment operator. This research presents a novel approach to intelligently identify potential hazards posed to workers operating near an equipment by determining the visible and blind space regions of an equipment operator in real-time. A depth camera is used to estimate the head posture of the equipment operator and continuously track the head location and orientation using Random Forests algorithm. The head posture information is then integrated with point cloud data of the construction equipment to determine both the visible and the blindspots region of the equipment operator using Ray-Casting algorithm. Simulation and field experiments were carried out to validate this approach in controlled and uncontrolled environment respectively. Research findings demonstrate the potential of this approach to enhance safety performance by detecting hazardous proximity situations.

京都大学 / 0048 / 新制・課程博士 / 博士(情報学) / 甲第21209号 / 情博第662号 / 新制||情||114(附属図書館) / 京都大学大学院情報学研究科知能情報学専攻 / (主査)教授 河原 達也, 教授 鹿島 久嗣, 教授 田中 利幸, 講師 吉井 和佳 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DFAM