The road transport sector, dominated by internal combustion engines, accounts for as high as 23% of annual carbon emissions and is considered the major area where urgent carbon reduction strategies are required. Natural gas is considered one of the intermediate fuels to reduce carbon emissions before net carbon neutral solutions can be achieved. Methane (CH4), a major constituent of natural gas, has the highest hydrogen-to-carbon ratio among the naturally occurring hydrocarbons, and the CO2 emission from natural gas combustion is around 25% less than diesel combustion. Lean combustion shows promises for improved engine efficiency, thereby reducing carbon emissions for a given required power output. However, igniting lean natural gas mixtures requires high ignition energy, beyond the capability of spark ig nition. The pre-chamber combustion (PCC) concept can provide the required ignition energy with relatively simple components. While most pre-chamber designs found in the literature are bulky and require extensive cylinder head modifications or complete engine redesign, the narrow-throat pre-chamber design can readily fit the diesel injector pockets of most heavy-duty engines without the need for substantial hardware modifications. The unique pre-chamber design is significantly different from the contemporary pre-chamber geometries, and its engine combustion phenomena and operating characteristics are largely unknown. This thesis work investigates the effect of important pre-chamber dimensions, such as the volume, nozzle hole diameter, and throat diameter, on the engine operating characteristics and emission trends. The experiments focus on the lean operation with excess air ratios (λ) exceeding 1.6, which can be achieved by auxiliary fuel injection into the pre-chamber. The air-fuel mixture formation process inside the pre-chamber is also investigated by employing 1-D and 3-D CFD simulations, where the engine experiments provided the boundary conditions. From the simulation results, a correlation between the injected and the trapped fuel in the pre-chamber is proposed by theoretical scavenging models to estimate the air-fuel ratio in the pre-chamber with high accuracy. Although the studies largely rely on thermodynamic engine experiments, the 1-D engine simulation implements the engine studies in estimating the mixture composition and heat transfer losses from the engine.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第23882号 / 工博第4969号 / 新制||工||1776(附属図書館) / 京都大学大学院工学研究科機械理工学専攻 / (主査)教授 黒瀬 良一, 教授 中部 主敬, 教授 岩井 裕 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

There is a great interest to develop biomass combustion systems for industrial and utility applications. Improved biomass energy conversion systems are designed to provide better combustion efficiencies and environmental friendly conditions, as well as the fuel flexibility options in various applications. The gas derived from the gasification process of biomass is considered as one of the potential candidates to substitute traditional fuels in a combustion process. However, the gascomposition from the gasification process may have a wide range of variation depending on the methods and fuel sources. The better understanding of the combustion features for the Gasified Biomass Gas(GBG) is essential for the development of combustion devices to be operated efficiently and safely at the user-end. The objective of the current study is therefore aiming to achieve data associated with the combustion features of GBG fuel for improving the efficiency and stability of combustion process. The numerical result is achieved from the kinetic models of premixed combustion with a wide range of operating ranges and variety of gas compositions. The numerical result is compared with experimental data to provide a better understanding of the combustion process for GBG fuel. In this thesis the laminar flame speed and ignition delay time of the GBG fuel are analyzed, using 1-D premixed flame model and constant volume model respectively. The result from different kinetics are evaluated and compared with experimental data. The influences of initial temperature, pressure and equivalence ratio are considered, as well as the variation of gas compositions. While the general agreement is reached between the numerical result and experimental data for laminarflame speed prediction, deviations are discovered at fuel-rich region and increased initial temperature. For the ignition delay time, deviations are found in the low-temperature and low pressure regime. The empirical equations considering the influence of initial temperature,pressure and equivalence ratio are developed for laminar flame speed and ignition delay times. The influence of major compositions such as CO, H2 and hydrocarbons are discussed in details in the thesis. Furthermore, a simplified kinetic model is developed and optimized based on the evaluation of existing kinetics for GBG fuel combustion. The simplified kinetic model is expected to be used for simulating the complexc ombustion process of GBG fuel in future studies. / <p>QC 20150511</p>

The prevalence of gas turbines operating in primarily lean premixed modes is predicated on the need for lower emissions and increased efficiency. An enhancement in the mixing process through the introduction of swirl in the combustion reactants is also necessary for flame stabilization. The resulting lean swirling flames are often characterized by a susceptibility to feedback between velocity, pressure and heat release perturbations with a potential for unstable self-amplifying dynamics. The existing literature on combustion dynamics is predominantly dedicated to premixed flame configurations motivated by power generation and propulsive gas turbine applications. In the present research effort, an investigation into the response of atmospheric, non-premixed swirling flames to acoustic perturbations at various frequencies (fp = 0-315Hz) and swirl intensities (S=0.09 and S=0.34) is carried out. The primary objective of the research effort is to broaden the scope of fundamental understanding in flame dynamics in the literature to include non-premixed swirling flames. Applications of the research effort include control strategies to mitigate the occurrence of thermoacoustic instabilities in future power generation gas turbines. Flame heat release is quantitatively measured using a photomultiplier with a 430nm bandpass filter for observing CH* chemiluminescence which is simultaneously imaged with a phase-locked CCD camera. Acoustic perturbations are generated with a loudspeaker at the base of an atmospheric co-flow burner with resulting velocity oscillation amplitudes, u'/Uavg in the 0.03-0.30 range. The dependence of flame dynamics on the relative richness of the flame is investigated by studying various constant fuel flow rate flame configurations. The effect of varying fuel flow rates on the flame response is also examined using with dynamic time-dependent fuel supply rates over the data acquisition period. The Particle Image Velocimetry (PIV) method is used to study the isothermal flow field associated with acoustic pulsing. The acoustic impedance, wavelet analysis, Rayleigh criteria and phase conditioning methods are used to identify fundamental mechanisms common to highly responsive flame configurations.

No description available.

No description available.

No description available.

No description available.

No description available.

[EN] The main objective of this thesis is the analysis and comprehension of the association of two different combustion concepts (premixed and diffusive combustion) on the pollutant emissions and engine performance in a mid-size Diesel engine. The evaluation is performed at mid and high load conditions, where the implementation of premixed combustion is generally challenging. The association of the two combustion modes is hard to attain in a conventional Diesel engine, especially the preparation of the premixed charge with early pilot injection. Therefore, the approach followed during the study has been divided in two main steps: first, the bibliography on the subject is reviewed and two strategies avoiding the main issues mentioned in the literature are grossly evaluated in order to estimate their potential for emission reduction. Second, a deeper study of the combustion processes and emissions formation is performed, focusing only on the partially premixed combustion strategies that actually have the potential for emissions reduction. Along the second part of the study, the association of premixed and diffusive combustion is evaluated together with variation of conventional calibration parameters such as the intake oxygen concentration (via exhaust gas recirculation), the boost pressure and the start of the main injection timing, at different engine speed and load conditions. A cross analysis of the results obtained is performed in order to understand the key reasons that permit the reduction of the pollutant emissions with this strategy. In a final part of the thesis, the partially premixed combustion strategies studied are confronted with the challenges they might face when really considered for their introduction in a production engine (oil-dilution, noise...) to finally conclude on their technological potential. / [ES] El objetivo principal de la Tesis es el an álisis y la comprensi ón de la asociaci ón de dos conceptos de combusti ón diferentes (combusti ón en premezcla y por difusi ón) en las emisiones contaminantes y las prestaciones en un motor Diesel de cilindrada media. La evaluaci ón se realiza en condiciones de media y alta carga, en la cuales la implementaci ón de una combusti ón premezclada es generalmente complicada. La asociaci ón de los dos modos de combusti ón es dif cil de conseguir en un motor Diesel convencional, especialmente la preparaci ón de la carga premezclada con inyecci ón piloto adelantada. Por esa raz ón, el estudio se divide en dos partes principales: primero se revisa la bibliograf ía acerca del tema, centrando la atenci ón en dos estrategias que permiten evitar los principales problemas evocados en la literatura, determinando su potencial para la reducci ón de las emisiones contaminantes. En un segundo lugar, se realiza un estudio m as profundo de los procesos de combusti ón y de formaci ón de contaminantes, centr ándose únicamente en las estrategias de combusti ón parcialmente premezclada que sí tienen el potencial para reducir las emisiones contaminantes. En la segunda parte del estudio, se aborda la asociaci ón de combustiones premezclada y por difusi ón junto con la variaci ón de par ametros de calibraci on convencionales como la concentraci ón de ox ígeno en la admisi ón (por medio de recirculaci ón de los gases de escape), la presi ón de sobrealimentaci ón y el inicio de la inyecci ón principal, en diferentes condiciones de r egimen y de carga del motor. El an álisis cruzado de los resultados se realiza con el af án de entender las razones claves de los procesos que permiten la reducci ón de las emisiones contaminantes con esta estrategia. Como etapa final de esta tesis, se confrontan las estrategias de combusti ón parcialmente premezclada estudiadas con los problemas a los cuales podr ían llevar si realmente se considerar a su implementaci ón y un motor de serie (diluci ón de aceite, ruido...) para finalmente concluir sobre su potencial tecnol ógico. / [CA] L'objectiu principal de la tesi es l'an alisi i la comprensi o de l'associaci o de dos conceptes de combusti o diferents (combusti o en premescla i per difusi o) en les emissions contaminants i les prestacions en un motor Di esel de cilindrada mitjana. L'avaluaci o es realitza en condicions de mitja i alta c arrega, en las quals la implementaci o d'una combusti o premesclada es generalment complicada. L'associaci o dels dos modes de combusti o es dif cil d'aconseguir en un motor Di esel convencional, especialment la preparaci o de la c arrega premesclada amb injecci o pilot avan cada. Per eixa ra o, l'estudi es divideix en dos parts principals: primer es revisa la bibliogra a sobre el tema, centrant l'atenci o en dos estrat egies que permeten evitar els principals problemes evocats en la literatura, determinant el seu potencial per a la reducci o de les emissions contaminants. En un segon lloc, es realitza un estudi m es profund dels processos de combusti o i de formaci o de contaminants, centrant-se unicament en les estrat egies de combusti o parcialment premesclada que si que tenen el potencial per a reduir les emissions contaminants. En la segona part de l'estudi, s'aborda l'associaci o de combustions premesclada i per difusi o junt amb la variaci o de par ametres de calibratge convencionals com la concentraci o d'oxigen en l'admissi o (per mitj a de recirculaci o dels gasos d'escapament), la pressi o de sobrealimentaci o i l'inici de la injecci o principal, en diferents condicions de r egim i de c arrega del motor. L'an alisi creuat dels resultats es realitza amb l'afany d'entendre les raons claus dels processos que permeten la reducci o de les emissions contaminants amb esta estrat egia. Com a etapa final d'esta tesi, es confronten les estrat egies de combusti o parcialment premesclada estudiades amb els problemes als quals podrien portar si realment es consideraria la seua implementaci o en un motor de s erie (diluci o d'oli, soroll...) per a finalment concloure sobre el seu potencial tecnol ogic. / Arthozoul, SJL. (2016). Study of the association of premixed and diffusive combustion processes on the combustion and pollutant emissions in a mid-size Diesel engine [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/63262