The topic of this diploma thesis is „Philosophy of improving quality in marketing“. The aim of the thesis is new concept of customer’s satifaction evaluation in the company Pekárny a cukrárny Náchod, a.s, analyse of actual situation of customer’s satifaction evaluation in the company, suggestions for it’s improvement and creation of new questionary for monitoring customer’s satifaction in the company.

<p>Consumers are negatively impacted by the increasingly high rate of product returns. In 2020, an estimated $428 billion in merchandise were returned to retailers post-purchase with $25.3 billion being fraudulent returns (NRF.com). Previous research has stated that consumers undergo various negative emotional and cognitive mechanisms when returning and identified reasons as to why consumers return purchases such as product failure, dissatisfaction, and regret (Lee, 2015). Specifically, regret occurs when an individual second-guesses a chosen product due to the realization that the benefits of the unchosen product outweigh the original choice, which elicits uncomfortable feelings (Zeelenberg et al., 1998). However, how does the process of product acquisition and the outcome of the purchasing decision affect post-purchase consumer regret? The purpose of this study is to investigate how the process of expending consumer resources (e.g., time vs. money) to acquire a product and the outcome of inconsistent product attitudes and behaviors (e.g., cognitive dissonance) can affect post-purchase consumer regret (PPCR). In this mixed factorial design, participants viewed scenarios that presented the ‘time’ and ‘money’ spent in acquiring their chosen product and were asked to read a product review that either elicited low or high dissonant feelings. It was hypothesized that consumers would experience greater PPCR when dissonance is high, and the time spent to acquire the product is primed. The interaction effect was not supported; however, an ad hoc analysis revealed that a consumer experienced less PPCR when dissonance is high, and the time spent to acquire the product is highly convenient. The current findings highlight the importance of understanding the process and outcome of purchase on post-purchase evaluations.</p>

Social responsibility and ethics have been shown to have a positive influence on consumer behavior, however the vast majority of related research has measured this relationship indirectly through scenario analysis of hypothetical firms rather than consumers' perceptions of real-world firms. This dissertation focused on a real-world application of the theory. Each hypothesis that specified a positive relationship was supported. These results show that Brand Social Responsibility Image not only positively influences Brand Loyalty, but also influences the perception of both Product Quality and Service Quality. Concurrently, it was found that both Product and Service Quality Image influenced Brand Loyalty. When controlling for the effect of other variables, some of the relationships proved to be weaker than expected. There were three hypotheses that tested the moderating effect of Inclination to Reward Brand Social Responsibility Image. The moderating influence of Inclination to Reward Brand Social Responsibility Image (RSRI) on the relationships between Brand Social Responsibility Image (BSRI) and Product Quality Image and between BSRI and Brand Loyalty were greatest for low levels of BSRI. Consumers rated Product Quality Image and Brand Loyalty lowest under conditions of L-BSRI and H-RSRI. Alternatively, when BSRI was high, both high and low treatments of RSRI resulted in similar sample means for both Product Quality Image and Brand Loyalty (i.e., minimal moderating effect). Inclination to Reward Brand Social Responsibility Image (RSRI) appeared to moderate the relationship between Brand Social Responsibility Image (BSRI) and Service Quality Image at high levels of BSRI. In other words, the perception of service quality was relatively high when both BSRI and RSRI were viewed as being high. Under conditions of H-BSRI and L-RSRI, Service Quality Image was substantially lower. Under conditions of L-BSRI, there was very little difference between L- and H-RSRI. / Ph. D.

Driven by the highly cyclical nature of their increasingly commoditised product offerings, many capital goods manufacturers are seeing the benefits of delivering services integrated with their core product offerings. Whilst existing research is almost unanimous in advocating the value of a servitization strategy, understanding how these product-service systems (PSSs) can be developed and delivered remains a significant challenge. The closely related PSS field, which has its heritage in the environmental and social science disciplines, is more mature in this area and a number of models have been proposed. The research reported within this thesis contributes to knowledge by investigating whether the approaches to PSS development, reported within the PSS literature, reflects the PSS development practice of servitized manufacturers. More specifically, soft systems methodology was used to explore the delivery of PSSs within the UK railway industry in order to gain an understanding of the implications for developing new PSSs. With this understanding, the existing approaches to PSS development were evaluated with respect to one servitized manufacturer through an in-depth single case study. The findings highlighted a number of significant differences between the practice of the servitized manufacturer and the literature. A survey was used to investigate whether the differences were generalisable to a larger sample of servitized manufacturers. The findings point towards the simplification of the reported phases within PSS development and the inclusion of a number of previously unreported processes and activities. Based on these results a new model of PSS development is proposed to better reflect the practice of servitized manufacturers. The model, consisting of four phases and seventeen processes, was operationalised in the form of a workbook and tested through application. Applying the workbook resulted in the successful creation of a number of new PSS concepts.

This thesis explores the conditions under which traditional Small and Medium Enterprises (SMEs) can be involved in the design of sustainable Product Service Systems (PSS). The integration between design and Information and Communication Technologies (ICT) in the context of sustainable business development was used to define the space for this exploration. The research was carried out through a case study with a group of Colombian Manufacturing SMEs. As a result of the case study a business framework was developed to guide the design of sustainable PSS. In order to establish the basis of the research a review of the literature on sustainable business development, ICT, design, product service systems and SMEs was carried out. This review brought to light the main features of a sustainable PSS and the challenges associated with its design. These challenges were further investigated in the context of SMEs with a scoping study involving a group of 38 Colombian SMEs. Additionally, 36 PSS already on the market were analysed to identify the possible relationships between design and ICT, and to determine how they could contribute to develop sustainable PSS. The scoping study and the analysis of the 36 PSS gave structure to the case study with a second group of Colombian Manufacturing SMEs. This case study aimed to build understanding of the connection between the characteristics of these SMEs and the main features of a sustainable PSS. As a result of this case study a set of concepts, drivers and barriers to take into account to design sustainable PSS formed the basis of a business framework developed and validated in the final part of the research. The business framework proposed can help to understand the resources and changes needed to develop a sustainable PSS, reducing the uncertainty that it may cause. The integration between product and service design and ICT is used in the framework to outline the areas of opportunity in the design of sustainable PSS. This business framework developed as a result of the research promises to be a helpful tool for organisations working to support the transformation of SMEs toward competitive and sustainable business models using as a basis the integration between product and service design and ICT. Despite the Colombian context the results and outcomes of this research are described in general terms to be applicable in other contexts around the world working with SMEs in the design of sustainable PSS.

The growth of the service sector, after the Second World War, represented one of the changes brought by the Third Industrial Revolution. Nowadays, the service sector makes up the bulk of today’s economies around the world. However, too much emphasize on the development of the service sector, can be harmful for the economies in the long run. Therefore, the manufacturing sector should not be neglected, but developed along with the service sector. During the past decades, the manufacturing and the service sectors “worked” alongside through the servitization. The product and service integrations that manufacturers are offering, not only create additional value for the products, but also allow the manufacturers to expand their market share, gain higher revenues, attract new customers, etc. The development of the new technologies have enhanced and stimulated the product and service integration, which creates additional value. The additional created value is not beneficial only for the companies, but also for the customers, since it increases the customers’ satisfaction. Moreover, due to the creation of hi-tech products, the manufacturers include expertise and training as part of the integrated offers, which is a benefit plus for the customers.

Då stora förändringar skett på den svenska bankmarknaden de senaste 30 åren, dels på grund av den finansiella avregleringen men även som följd av den tekniska utveckligen, har konkurrenssituationen stärkts. Antalet banker som konkurrerar om kunderna har ökat och bankerna måste därför arbeta hårt för att både behålla befintliga samt få nya kunder.Kunderna utsätts regelbundet för marknadsföringskampanjer där de lockas med diverse erbjudanden samt av nya eller utvecklade tjänster. Bankerna försöker finna sätt att tillhandhålla något som kan höja värdet av tjänsten/produkten för kunden.Samtidigt är kunderna på bankmarknaden lojala mot sina banker och förhållandevis få kunder byter bank, oavsett huruvida de är nöjda med den bank de har eller inte. Konkurrensverket gör bedömningen att trots de goda valmöjligheterna för konsumenterna och den starka konkurrensen bland bankerna är konsumentrörligheten väldigt trög i Sverige.Syftet med den här uppsatsen har varit att undersöka vilka preferenser konsumenter värdesätter i valet av sin bank, samt ur ett kundperspektiv beskriva de viktigaste delarna i ett erbjudande. Detta har undersökts genom att kvalitativt datamaterial har samlats in samt analyserats.I undersökningen har vi arbetat utifrån två problemformuleringar som rör vilka betydelsefulla delar som bör ingå i ett bankerbjudande samt vilka kvalitetsfaktorer som är mest betydelsefulla för den enskilda konsumenten. Problemformuleringarna har besvarats utifrån den empiri som samlats in genom kvalitativa intervjuer med nio respondenter.I resultatet kan vi se att endast ett fåtal av respondenterna kan tänka sig att byta bank om de får ett bra erbjudande från en konkurrerande bank. Kunderna värdesätter en hög servicenivå och anser att det är mycket viktigt att kunna ha förtroende samt känna tillit till sin bank.

Context: Current unsustainable practices have resulted in the depletion of natural resources and a prevailing material scarcity. Urban Mining has emerged in this context and suggests the “mining” of cities or other sources in urban areas to retrieve valuable resources. It raises the topic of how urban mining as a market segment of the construction industry is like today and in the future.  Objective: The thesis sets out to study what firms in the urban mining market segment desires in terms of needs and priorities. Furthermore, what could be prioritized in the future (2030), what future scenarios could be expected and what implications these can have on organizations within the segment and on the construction industry.  Method: A foresight methodology was applied as a framework for the research design. Interview with representatives from 10 firms, including observations of their operations, resulted in a number of mutual needs shared across the urban mining segment. These were prioritized in relative importance based on a questionnaire of 67 respondents representing 44 different firms in Sweden. A combination of these studies and a review of technology trends further enabled the extrapolation of future scenarios.  Results: The findings shows that firms within the urban mining market segment prioritizes and emphasizes needs related concerns in optimization, cost control, safety, environmental and social care today. Needs related to safety, environmental and social care are indicated to remain top prioritized as a result of the future market circumstances. A holistic and lifecycle approach in urban mining practices was deemed of low priority today but was indicated to grow significantly in relative importance in the future.  Conclusion: Technology, urbanization and globalization indicates stricter and more competitive market circumstances in the future. Especially related to safety, lifecycle consideration, environmental, and social care. The research suggests that firms concerned and those operating within the urban mining segment may need to undergo transformational changes in their organization to meet what the market segment expects in the future. Moreover, the findings opens up the possibility for actors and stakeholders concerned with the construction industry to proactively go into a desired future by knowing how the future market could unfold. / Stanford University, ME310: Urban Mining

Aim: The purpose of this study is to identify factors that can attract customers to buy online and help the grocers to improve their online grocery services to retain and obtain customers. Design/Methodology/Approach: A qualitative method was used, based on triangulation methodology including observation and interviews of manager and employees. Quantitative data was collected by handing out questionnaire to 204 potential customers and 30 existing customers. Findings: The study shows that product and service quality, time saving and convenience, web page layout, customers’ trust in grocers (service providers), store image and advertising are the important factors that customers consider when they decide to use online grocer service. E- grocers also need to consider these factors when they start online grocery service. Suggestions for Future Research: An extensive study with large population sample and co- operation from other companies can help to generalize the results. Future studies can be extended to include drive-in and shared reception box service method, and consider the cost for the customers in e-grocery sector.

Background - Consumer individualisation is a growing challenge in the fashion industry, yet it is also an area of great potential as well as a way to dampen over-consumption. The potential lays in how fashion brands can find ways to steer consumption towards a circular economy and utilise their platform to create meaningful connections with its consumers. Today the fashion industry is looking at options to the traditional take-make-dispose model where non-renewable resources are used at an ever-increasing rate. The Swedish fashion retailer Monki together with Re:textile decided to investigate if servitization could turn the above mentioned linear model into a more sustainable, circular model. They set out to develop an in-store concept where customers could customise their garments instantaneously and this formed the basis of a project brief and a Business Model Canvas which both served as the foundation and starting point of the presented research.   Purpose - The purpose of the research is to develop and test a product extension service business model that utilises a direct to garment printer to mass customise jeans in-store. The said purpose is divided into three perspectives: the design-, service provider - and customer perspective , covering four cornerstones of the Business Model Canvas. The different perspectives with their separate, but related, research questions will be unified again in the conclusion.   Methodology - To fulfill the purpose, the thesis research is relying on abductive reasoning through systematic combining, while implementing a mixed methods approach. Systematic combining works well in extensive and diversified research where the researchers shift from one type of research activity to another in a quest to match empirical observations with theory, thus, the ultimate objective of systematic combining is matching theory with reality until both come close enough to form a functional outcome. Throughout the study, both qualitative and quantitative studies are conducted through action research, a customer case study as well as experimental research in order to fulfill the purpose of the thesis.   Findings and Discussion - The conclusions and recommendations that are presented in the form of an updated Business Model Canvas all derive from the research conducted incorporating the three perspectives that have guided the thesis through all of its stages namely the design, service provider and customer perspective. A product service extension business model is proposed as a solution to the project brief that serves as a foundation for the research. The results of the research all point to the conclusion that it is indeed possible to implement the product service extension successfully. Tests relating to the customer as well as the service provider perspective have proven themselves implementable due to low overall printing costs and fast print time enhancing the customer shopping experience. Together with an indication of product satisfaction as well as creating a strong customer-product connection through the co-design experience it contributes to a circular economy. Furthermore, the overall consistent printing costs, as well as the insignificant time differences in the experiments total time, support the implementation of a PSS in a retail setting.   Research Limitations - This research is confined to, and based on, the Monki and Re:textilebrief as well as a Business Model Canvas so therefore, no other ideas than the ones stated in the brief have been explored. The research´s inferences are limited to the given conditions as well as a laboratory setting. Further, the experimental research study will only test pocket shaped artwork on 100 percent cotton denim jeans using a Brother GTX 4 printer as a chosen direct to garment printer. The scope of the customer case study can be described as surveying as well as observing 40 of the visitors of the 2018 Fashion days and Exit at the Swedish School of Textiles while they test the proposed PSS in a mock-up retail store setting without an actual sales transaction.   Further Research - The next logical step would be to run the tests in a real-life retail store as opposed to the laboratory setting. After the proposed product service extension is implemented at scale POS data could be gathered in order to establish the customers’ true willingness to participate in the customisation experience in-store. Additionally, a longitudinal continuation of the study would give answers to some of the indications arising from the case study, such as whether the mass customisation could truly serve as a brand strengthening activity or lead to an extended garment lifecycle in reality.