Submitted by Carolina Neves (carolinapon@uefs.br) on 2016-08-09T01:01:22Z No. of bitstreams: 1 Karine_Souza_de_Almeida_Dissertacao_Final.pdf: 13569698 bytes, checksum: 81752dfa3be4ee9493654f5c61524c5a (MD5) / Made available in DSpace on 2016-08-09T01:01:22Z (GMT). No. of bitstreams: 1 Karine_Souza_de_Almeida_Dissertacao_Final.pdf: 13569698 bytes, checksum: 81752dfa3be4ee9493654f5c61524c5a (MD5) Previous issue date: 2016-05-24 / Funda??o de Amparo ? Pesquisa do Estado da Bahia - FAPEB / By using the Orthogonal Frequency Division Multiplexing (OFDM), it is possible to transmit by a channel a more robust signal and less susceptible to interferences. When such technique, based on orthogonal subcarriers, is combined with the use of propagation models, which are relevant tools for simulating the signal behavior in respect to environmental parameters and antenna configurations, it is feasible to have an evaluation about the performance of these systems, improving their project phase. Therefore, this work presents the use of OFDM technique applied to two propagation models: a two-ray geometric model and a microcellular model adapted to the Paulista Avenue, S?o Paulo, SP, having as objective the analysis of a mobile communication system through Bit Error Rate (BER). In the developed application using the MAtrix LABoratory (MATLAB) software, the mobile communication system based on OFDM admits several scenarios during the simulation, so that scenarios are related to positioning of the antennas, heights, type of modulation, size of the bit sequence to be sent, and others. The adopted OFDM architecture has been the IFFT/FFT and based on it, the system performs the transmission and reception of a bit set through a channel with interference by using different digital modulations, making appropriate comparisons. / Atrav?s da utiliza??o da t?cnica de Multiplexa??o por Divis?o de Frequ?ncias Ortogonais (OFDM, do ingl?s, Orthogonal Frequency Division Multiplexing), ? poss?vel transmitir por um canal um sinal mais robusto e menos propenso a interfer?ncias. Quando tal t?cnica, baseada na utiliza??o de subportadoras ortogonais, ? aliada ao uso de modelos de propaga??o, que s?o ferramentas relevantes para a simula??o do comportamento do sinal em rela??o aos par?metros do ambiente e as configura??es das antenas, ? poss?vel ter uma avalia??o a respeito do desempenho desses sistemas, melhorando a fase de projeto dos mesmos. Sendo assim, este trabalho apresenta o uso da t?cnica OFDM aplicada a dois modelos de propaga??o: um modelo geom?trico de dois raios e um modelo microcelular adaptado para a Avenida Paulista, S?o Paulo, SP, possuindo como objetivo a an?lise de um sistema de comunica??o m?vel atrav?s do c?lculo da Taxa de Erro de Bit (BER, do ingl?s, Bit Error Rate). Na aplica??o desenvolvida utilizando o software MATLAB (MATrix LABoratory), o sistema de comunica??o m?vel baseado em OFDM assume diversos cen?rios durante as simula??es, de forma que esses cen?rios s?o relacionados ao posicionamento das antenas, alturas, tipo de modula??o, tamanho da sequ?ncia de bits a ser enviada, entre outras. A arquitetura OFDM adotada foi a IFFT/FFT e baseado nela, o sistema realiza a transmiss?o e a recep??o de um conjunto de bits por um canal com interfer?ncias utilizando diferentes modula??es digitais, fazendo as devidas compara??es.

Made available in DSpace on 2016-04-04T18:31:27Z (GMT). No. of bitstreams: 1 Eduardo Pinto de Oliveira.pdf: 2067309 bytes, checksum: 3dc805f0ad9724f8d04d0359795ed071 (MD5) Previous issue date: 2009-02-13 / The objective of this work is to present the metrics of performance evaluation in Broadband Wireless Access (BWA). To achieve this goal it was necessary to build a Framework of network management customized to the equipment used. It was applied the knowledge in signals propagation of radio frequency (RF), radio planning of cellular systems, network management and statistical analyses. In the realization of the tests for the data collect it was configured a setup of tests with one Radio Base Station (BTS) and two Remote Stations (RS) located in the Pontif?cia Universidade Cat?lica de Campinas (PUC Campinas). It was used a technology commercially named as Pre-Wireless Interoperability of Multiple Accesses (Pre-WiMAX), operating in 5.8 GHz. This technology uses Orthogonal Frequency Division Multiplexing (OFDM) as multiplex technique and Carrier Sense Multiple Access (CSMA) as an access control to the media. In the development, it is presented a set of metrics related to the signals propagation by RF. The data collect was executed using the Simple Network Management Protocol (SNMP). The performance evaluation has considered the measures realized and its analytic and statistic treatments for a long time. By using the results of the measures, it was built the metrics that allow the evaluation of the performance in this network type, such as: link efficiency, throughput, bit error rate (BER), frame error rate (FER) and packet error rate (PER), among others. The work, as a whole, presents a strategy of practical evaluation applicable to BWA networks, creating indicators for decision-makings. To validate and complement the work it was done an Quality of Service (QoS) evaluation according to the International Telecommunication Union - Telecommunication sector (ITU-T) and the International Engineering Task Force (IETF) comparing the results with and without prioritization of Voice over Internet Protocol (VoIP) service . / O objetivo deste trabalho ? apresentar m?tricas de avalia??o de desempenho em Broadband Wireless Networks (BWA). Para atingir este objetivo foi necess?ria a constru??o de um Framework de ger?ncia de redes customizado aos equipamentos utilizados. Foram aplicados os conhecimentos de propaga??o de sinais de r?dio freq??ncia (RF), planejamento de sistemas celulares, gerenciamento de redes e an?lise estat?stica. Na realiza??o dos testes para a coleta de dados foi configurado um setup de testes com uma Esta??o R?dio Base (ERB) e duas Esta??es Remotas (ER), localizadas na Pontif?cia Universidade Cat?lica de Campinas (PUC Campinas). Para a valida??o da metodologia foi utilizada uma tecnologia denominada comercialmente como Pre-Wireless Interoperability of Multiple Accesses (Pre-WiMAX), operando em 5.8 GHz. Esta tecnologia utiliza Orthogonal Frequency Division Multiplexing (OFDM) como t?cnica de multiplexa??o e Carrier Sense Multiple Access (CSMA) como controle de acesso ao meio. No desenvolvimento ? apresentado um conjunto de m?tricas, referentes ? propaga??o de sinais por RF. A coleta de dados foi efetuada utilizando Simple Network Management Protocol (SNMP). A avalia??o de desempenho considerou as medidas realizadas e o seu tratamento anal?tico e estat?stico por longos per?odos de tempo. Com a utiliza??o dos resultados de medidas, foram constru?das as m?tricas que permitem avaliar o desempenho deste tipo de rede, tais como: efici?ncia de link, throughput, bit error rate (BER), frame error rate (FER), packet error rate (PER), entre outras. O trabalho como um todo apresenta uma estrat?gia de avalia??o pr?tica e aplic?vel a redes BWA, criando indicadores para tomadas de decis?o. Para validar e complementar o trabalho foi efetuada uma avalia??o de Quality of Service (QoS) segundo a International Telecommunication Union Telecommunication sector (ITU-T) e a International Engineering Task Force (IETF) com a compara??o de resultados sem e com prioriza??o do servi?o Voice over Internet Protocol (VoIP).

Made available in DSpace on 2014-12-17T14:55:26Z (GMT). No. of bitstreams: 1 FranciscoAA_Capa_ate_11.pdf: 7331054 bytes, checksum: 95b093e73afc9c2e5df63a5d0c5b2c6b (MD5) Previous issue date: 2005-07-06 / A 2.5D ray-tracing propagation model is proposed to predict radio loss in indoor environment. Specifically, we opted for the Shooting and Bouncing Rays (SBR) method, together with the Geometrieal Theory of Diffrartion (GTD). Besides the line-of-sight propagation (LOS), we consider that the radio waves may experience reflection, refraction, and diffraction (NLOS). In the Shooting and Bouncing Rays (SBR) method, the transmitter antenna launches a bundle of rays that may or may not reach the receiver. Considering the transmitting antenna as a point, the rays will start to launch from this position and can reach the receiver either directly or after reflections, refractions, diffractions, or even after any combination of the previous effects. To model the environment, a database is built to record geometrical characteristics and information on the constituent materials of the scenario. The database works independently of the simulation program, allowing robustness and flexibility to model other seenarios. Each propagation mechanism is treated separately. In line-of-sight propagation, the main contribution to the received signal comes from the direct ray, while reflected, refracted, and diffracted signal dominate when the line-of-sight is blocked. For this case, the transmitted signal reaches the receiver through more than one path, resulting in a multipath fading. The transmitting channel of a mobile system is simulated by moving either the transmitter or the receiver around the environment. The validity of the method is verified through simulations and measurements. The computed path losses are compared with the measured values at 1.8 GHz ftequency. The results were obtained for the main corridor and room classes adjacent to it. A reasonable agreement is observed. The numerical predictions are also compared with published data at 900 MHz and 2.44 GHz frequencies showing good convergence / Este trabalho apresenta um modelo 2,5D de tra?ado de raios para predi??o de propaga??o em ambientes interiores (indoor). Especificamente, optou-se pelo M?todo dos Raios For?ados (SBR) em combina??o com a Teoria Geom?trica da Difra??o (GTD). Considera-se que, al?m de propaga??o em visada direta (LOS), podem ocorrer os mecanismos de reflex?o, refra??o e difra??o (NLOS). No M?todo dos Raios For?ados (SBR), a antena transmissora lan?a um feixe de raios que pode ou n?o alcan?ar o receptor. Considerando a antena transmissora como elemento pontual, os raios s?o lan?ados dessa posi??o, podendo alcan?ar o receptor diretamente ou mediante reflex?es, refra??es, difra??es, ou pela combina??o dessas modalidades de propaga??o. Para o modelamento do ambiente, um banco de dados ? constru?do para armazenar as caracter?sticas geom?tricas e informa??es dos materiais constituintes do cen?rio. O banco de dados funciona independentemente do programa de simula??o, possibilitando robustez ? implementa??o e maior flexibilidade para a representa??o de outros ambientes. Cada mecanismo de propaga??o ? tratado separadamente. Na propaga??o em linha de visada, o raio direto oferece maior contribui??o ao sinal recebido, enquanto o raio refletido, refratado e difratado apresentam maior influ?ncia quando a propaga??o ocorre com obstru??o. Neste caso, o sinal transmitido alcan?a o receptor por diversas trajet?rias, ocorrendo desvanecimento por m?ltiplos percursos. O canal de transmiss?o, no sistema m?vel, ? simulado deslocando-se o transmissor ou o receptor ao longo do ambiente. A valida??o do m?todo ? verificada atrav?s de simula??es e medi??es. As perdas de percurso calculadas s?o comparadas com os valores medidos, na freq??ncia de 1,8 GHz. Os resultados s?o obtidos para ambientes de corredor e salas de aula adjacentes. Uma boa converg?ncia ? observada. Os resultados num?ricos deste trabalho s?o tamb?m comparados com os dispon?veis na literatura especializada, na freq??ncia de 900 MHz e 2,44 GHz, mostrando boa concord?ncia

Made available in DSpace on 2016-04-04T18:31:29Z (GMT). No. of bitstreams: 1 Andre Peternela-2.pdf: 13622452 bytes, checksum: 1f9ac13f6b6653f2fc960f59cfecd1e2 (MD5) Previous issue date: 2009-12-11 / This paper proposes a new Propagation Model that considers lateral diffraction in buildings for signal-level point-multipoint predictions. A review of existing theories of diffraction is presented, as well as topics of analysis of electromagnetic signals propagation and propagation models. In the sequence the assumptions of the proposition of the diffraction and propagation model are discussed in order to justify the proposed model. Finally comparative theoretical and experimental results are presented about this new model. / Este trabalho prop?e um novo Modelo de Propaga??o que considera difra??o lateral em edif?cios para predi??es de n?vel de sinal ponto-multiponto. S?o apresentadas as teorias de difra??o existentes, assim como t?picos de an?lise da propaga??o de sinais eletromagn?ticos e modelos de propaga??o. Com as bases te?ricas s?o discutidas as premissas da proposi??o do modelo de difra??o e propaga??o que justificam o modelo proposto neste trabalho. Por fim s?o apresentados resultados te?ricos comparativos e experimentais deste novo modelo.

Made available in DSpace on 2014-12-17T14:55:23Z (GMT). No. of bitstreams: 1 RonaldoAM.pdf: 2082162 bytes, checksum: 2dd11d30b856b23cf429317a1e68bfbe (MD5) Previous issue date: 2006-06-12 / In this dissertation new models of propagation path loss predictions are proposed by from techniques of optimization recent and measures of power levels for the urban and suburban areas of Natal, city of Brazilian northeast. These new proposed models are: (i) a statistical model that was implemented based in the addition of second-order statistics for the power and the altimetry of the relief in model of linear losses; (ii) a artificial neural networks model used the training of the algorithm backpropagation, in order to get the equation of propagation losses; (iii) a model based on the technique of the random walker, that considers the random of the absorption and the chaos of the environment and than its unknown parameters for the equation of propagation losses are determined through of a neural network. The digitalization of the relief for the urban and suburban areas of Natal were carried through of the development of specific computational programs and had been used available maps in the Statistics and Geography Brazilian Institute. The validations of the proposed propagation models had been carried through comparisons with measures and propagation classic models, and numerical good agreements were observed. These new considered models could be applied to any urban and suburban scenes with characteristic similar architectural to the city of Natal / Nesta tese novos modelos de predi??o de perda de percurso de propaga??o s?o propostos a partir de t?cnicas de otimiza??es recentes e de medi??es de n?veis de pot?ncias obtidas para as ?reas urbana e suburbana de Natal, cidade do Nordeste Brasileiro. Estes novos modelos s?o: (i) um modelo estat?stico que foi implementado baseado na adi??o de estat?sticas de 2a. ordem para a pot?ncia e a altimetria do relevo ao modelo de perdas lineares; (ii) um modelo com redes neurais artificiais que usou o treinamento do algoritmo backpropagation, a fim de obter a equa??o de perdas de propaga??o; (iii) um modelo baseado na t?cnica dos trajetos aleat?rios, que considera a aleatoriedade da absor??o e do caos do meio ambiente e que seus par?metros desconhecidos para a equa??o de perdas de propaga??o s?o determinados atrav?s de uma rede neural. A digitaliza??o do relevo das ?reas urbanas e suburbanas de Natal foi realizada atrav?s do desenvolvimento de programas computacionais espec?ficos e foram usados os mapas existentes no Instituto Brasileiro de Geografia e Estat?stica. As valida??es dos modelos propostos de predi??o de perda de propaga??o foram realizadas atrav?s de compara??es com medidas e modelos cl?ssicos de propaga??o, obtendo-se boas concord?ncias num?ricas. Estes novos modelos poder?o ser aplicados a qualquer cen?rio urbano e suburbano com caracter?sticas arquitet?nicas semelhantes ? cidade de Natal