The master’s thesis contains a complete design scheme of the heating system for a family house after additional thermal insulation of some structures. In the first part, we will learn about the house and the climatic conditions. In the next section there is the calculation of the overall heat transfer coefficients for building structures and also of the heat losses of the building before and after additional insulation. In the next section there is a selection of the temperature gradient, radiators, heat proposal for an option with a single source as well as for an option with two sources. The pressure losses through each element were calculated and hydraulic balancing using the thermo-regulation valves was performed. In the conclusion the safety components were checked and the total costs of both the implementation and the drawing documentation were assessed.

This thesis is theoretically described heating surfaces, radiators and regulation valves. There are also described their features, advantages and disadvantages and division according to design. The aim of the work is determine the dynamics characteristics of heating surfaces and radiators including control valves, which are parts of measurement panel. Based on the measurement are determined appropriate characteristics of which are calculated values for regulating. The result of this study can serve as a guide to the practical measurement method of dynamics characteristics of the real-working heating systems, or serve as a template for the settings according to the measured data.

This dissertation is divided into three parts. The first part deals with the use of waste heat in the theoretical plane, where methods and possibilities of using this heat are described. Part Two, which is computational, deals with the suggestion of heating industrial halls with an adjacent, mostly office, building in two variants, then it goes on to also deal with the concept of equal pressure forced ventilation, a proposal of air curtains and preparation of hot water, where the heat source is a boiler. In the last part an experiment took place which investigated the conversion efficiency of thermal to electric energy.

The master’s thesis contains design for heat insulation of a family house for purpose of reducing the heat loss, adding a new room and complete design of heating system. First part is introducing the house, followed by calculating the heat loss for the original building. Next step proposes the heat insulation of constructions, design for the new room and recalculating the modified heat loss including comparison with the original values. Another part is dealing with the design of the heating system, providing calculations of the power requirement and the pressure loss of underfloor heating and panel radiators. After that there was the selection of the heat pump, bivalent heat source, choice of storage tank and solution for domestic water heating. In the last part the security components were checked, drawing documentation were created and attached and the calculation of return on investment was made.

This master’s thesis elaborates a design of water heating and heating system for a building of a rehabilitation center in Horný Hričov. The theoretical section describes operational efficiency of gas boilers and associated calculation methods. The experimental section covers measurements of condensing gas boiler at various temperatures of heating water conducted in university laboratory. Operational efficiency was then calculated using indirect method based on the measurement results. Subsequently, calculated values and values measured by an operational efficiency analyzer were compared. The comparison revealed minor deviations in operational efficiency values and different values of condensing heat utilization between the calculations and the analyzer results. The analytical section of the thesis consists of complex designs of two versions of the heating system and the water heating. The first design version uses condensing gas boilers as a heat source while the second version uses a water-air heat pump instead. The project section of the thesis is executed in the scope for a building permit and consists of a technical report and a design documentation.

The subject of the diploma thesis is accumulation tanks in heating systems. The first part introduces the topic of thermal energy storage and types of accumulation tanks. The second part describes two specific options of heating the building of the boarding house and the restaurant with the use of storage tanks in the heating system. A gas condensing boiler is designed as a heat source in one variant and a pellet boiler in the other variant. The third part deals with experimental measurements, in which the accumulation tank with the installation for better stratification of hot water and the accumulation tank without the installation are compared.

The subject of this diploma thesis is the design of heating and hot water in the administrative building in Zlin on Jižní Svahy. The building has five floors above ground and one underground floor. There are designed two variants of heat source for heating and hot water (transfer sta-tions and gas boiler). Part A solves water quality in heating systems. Part B deals with design of the heating system, hot water heating, insurance and facility expansion, technical report and drawings heating in the building. The last part C is the experimental measurement of the quality of heating water in the CZT systems.

Theme of diploma thesis is the heating of the indoor swimming pool. The thesis is departed to three parts. In the first part, there is a theoretical solution indoor climate of swimming pool. In the second part, there is a calculation solution of the project. Project solves heating of the indoor swimming pool. The last part is an experimental part. Theme of the experiment is measurement of temperature and relative humidity of the swimming pool.

This diploma thesis deals with efficiency of heat sources and indirect heating of hot water. First part of this thesis is about heating of hot water, particulary indirect heating of hot water and it is all summarized in theoretical knowledge section. Second part deals with central heating and indirect heating of hot water in four floor flat house. The heat source for this object is cascade of two gas condensing boilers. In this building there are mostly used panel radiators. In the last, third part, I experimentaly deal with operational efficiency of heating sources with heating of hot water.

This work deals with the determination of the operational efficiency of solid fules boilers for their inclusion in the relevant emission class according to ČSN EN 303-5. Two steel boilers of the same manufacturer, type and performance but of different ages, were measured. The experimental measurments in the real operation of the boilers were carrien out during the combustion of two types of fuels, namely brown coal and spruce wood.The operational efficiency of the monitored sources was calculated from the measured data using both direct and undirect methods. The found efficiency of the boilers corresponds to the expected values, due to their construction, age and the way of using individual components and regulations. In the project part of this work there is a proposal of heating of the family house for the condition of the building before and after the insulation. The calculation was made for the solid fuel boiler and heat pump. The building is heated by radiators and floor heating. The design of the whole system, technical report and project documentation were prepared for each variant.