No description available.

No description available.

No description available.

No description available.

No description available.

Traffic congestion is increasingly becoming a severe problem in many large cities around the world. The problem is more complex in developing countries where cities are growing at a much faster rate than those in the developed world. Advanced Traffic Management Systems (ATMS) are one of the Intelligent Transport Systems (ITS) technologies that have been recommended and used as a tool to ease congestion problems in many large cities in the developing world. However, it is unknown how specific local conditions commonly observed in these cities, such as poor lane discipline and complex road user interactions, affect the performance of these systems. GETRAM (Generic Environment for Traffic Analysis and Modeling) was used in this research as a tool to develop microscopic traffic simulation models for the city of Bandung in Indonesia. The field data in this research, comprising throughputs, queue lengths and travel times, were collected during peak and off peak periods from all 90 signalised intersections connected to SCATS (Sydney Co-ordinated Adaptive Traffic System). This field data is believed to comprise one of the largest sets of “real world” data available for the development and validation of microscopic traffic simulation models. Two data sets were collected for this research: the first was used to develop and calibrate the simulation model and the second was used for validation. A number of statistical tests were used to determine the adequacy of the model in replicating traffic conditions. The results of statistical tests clearly showed that all of the calibrated and validated models reproduced field conditions with an acceptable degree of confidence. Therefore, the models were accepted as accurate and valid replications of the “real world”. The validated models were then used to evaluate the performance of SCATS which was implemented in Bandung in June 1997 as a pilot project. The results of comparative evaluation of the models under SCATS and under the Fixed Time control (without SCATS) demonstrated that SCATS did not necessarily always produce better results than the Fixed Time control. Furthermore, the performance of SCATS was strongly influenced by specific local conditions in the city. The multiple regression method was used to investigate the relationship between the traffic performance measures and significant basic variables. Based on this analysis, the main findings were: first, throughput was found to increase at intersections with higher v/c (volume to capacity) ratios. Second, throughput was found to decrease at intersections with higher numbers of phases and movements, longer widths of leg intersections, and farther distances to adjacent intersections. Third, queue length was found to increase at intersections with higher numbers of phases and movements. Based on the above findings, a number of improvements were recommended to enhance the performance of SCATS. This research also used traffic simulation to evaluate the impacts of these recommended improvements in increasing the performance of SCATS. The main findings from this evaluation were: first, restricted number of phases and movements at selected intersections substantially increased the traffic flow (78%) and decreased the queue length (by 55 to 67%) at the intersection. Second, making leg intersections wider—without physically building additional road capacity but by changing the stream with higher road hierarchy and higher v/c ratio from a two-way road into a one-way road—has a great impact on enhancing the performance of SCATS. Traffic flows were found to increase between 7 and 106%, and queue lengths were found to markedly decrease between 77 and 100% at all the suggested intersections. Third, the application of SCATS at intersections which are not closely spaced was not effective. Therefore, it is recommended that intersections which are not closely spaced remain under the Fixed Time control. The results and findings from this study provide road authorities in developing countries with an appreciation and enhanced understanding of the factors that influence the performance of traffic management systems in cities with similar characteristics to those in Bandung. These findings will also assist traffic engineers determine the best practices for the implementation of advanced traffic control systems in their cities.

No description available.

No description available.

Traffic congestion is increasingly becoming a severe problem in many large cities around the world. The problem is more complex in developing countries where cities are growing at a much faster rate than those in the developed world. Advanced Traffic Management Systems (ATMS) are one of the Intelligent Transport Systems (ITS) technologies that have been recommended and used as a tool to ease congestion problems in many large cities in the developing world. However, it is unknown how specific local conditions commonly observed in these cities, such as poor lane discipline and complex road user interactions, affect the performance of these systems. GETRAM (Generic Environment for Traffic Analysis and Modeling) was used in this research as a tool to develop microscopic traffic simulation models for the city of Bandung in Indonesia. The field data in this research, comprising throughputs, queue lengths and travel times, were collected during peak and off peak periods from all 90 signalised intersections connected to SCATS (Sydney Co-ordinated Adaptive Traffic System). This field data is believed to comprise one of the largest sets of “real world” data available for the development and validation of microscopic traffic simulation models. Two data sets were collected for this research: the first was used to develop and calibrate the simulation model and the second was used for validation. A number of statistical tests were used to determine the adequacy of the model in replicating traffic conditions. The results of statistical tests clearly showed that all of the calibrated and validated models reproduced field conditions with an acceptable degree of confidence. Therefore, the models were accepted as accurate and valid replications of the “real world”. The validated models were then used to evaluate the performance of SCATS which was implemented in Bandung in June 1997 as a pilot project. The results of comparative evaluation of the models under SCATS and under the Fixed Time control (without SCATS) demonstrated that SCATS did not necessarily always produce better results than the Fixed Time control. Furthermore, the performance of SCATS was strongly influenced by specific local conditions in the city. The multiple regression method was used to investigate the relationship between the traffic performance measures and significant basic variables. Based on this analysis, the main findings were: first, throughput was found to increase at intersections with higher v/c (volume to capacity) ratios. Second, throughput was found to decrease at intersections with higher numbers of phases and movements, longer widths of leg intersections, and farther distances to adjacent intersections. Third, queue length was found to increase at intersections with higher numbers of phases and movements. Based on the above findings, a number of improvements were recommended to enhance the performance of SCATS. This research also used traffic simulation to evaluate the impacts of these recommended improvements in increasing the performance of SCATS. The main findings from this evaluation were: first, restricted number of phases and movements at selected intersections substantially increased the traffic flow (78%) and decreased the queue length (by 55 to 67%) at the intersection. Second, making leg intersections wider—without physically building additional road capacity but by changing the stream with higher road hierarchy and higher v/c ratio from a two-way road into a one-way road—has a great impact on enhancing the performance of SCATS. Traffic flows were found to increase between 7 and 106%, and queue lengths were found to markedly decrease between 77 and 100% at all the suggested intersections. Third, the application of SCATS at intersections which are not closely spaced was not effective. Therefore, it is recommended that intersections which are not closely spaced remain under the Fixed Time control. The results and findings from this study provide road authorities in developing countries with an appreciation and enhanced understanding of the factors that influence the performance of traffic management systems in cities with similar characteristics to those in Bandung. These findings will also assist traffic engineers determine the best practices for the implementation of advanced traffic control systems in their cities.

Os acidentes de trânsito são uma das principais causas de morte e invalidez no mundo inteiro, e projeções indicam que sua participação entre essas causas tende a aumentar no futuro. Estima-se que o fator humano contribua para a ocorrência de mais de 90% dos acidentes, e grande parte desta contribuição advém do comportamento. Nesta dissertação de mestrado, buscou-se identificar e caracterizar medidas de segurança de trânsito conforme sua influência em inibir o cometimento de infrações à legislação de trânsito por parte dos motoristas. Para tanto, foram conduzidas uma pesquisa qualitativa e uma pesquisa quantitativa. A pesquisa qualitativa, realizada através da técnica de Grupos Focados, foi utilizada para identificar as principais infrações de trânsito que contribuem para a ocorrência de acidentes, além de coletar subsídios para a elaboração da pesquisa quantitativa. Esta, por sua vez, consistiu na aplicação de um questionário auto-relatado a motoristas de automóvel da cidade de Porto Alegre. Como resultado, a pesquisa qualitativa indicou que as infrações que mais contribuem para os acidentes são a embriaguez, o excesso de velocidade e o avanço de sinal vermelho de semáforo. A pesquisa quantitativa permitiu concluir que as medidas de segurança de trânsito que mais influenciam os motoristas a não cometerem infrações de trânsito são aquelas relacionadas à restrição de direitos, como apreensão do veículo ou suspensão da habilitação, e à possibilidade de ser flagrado pelas autoridades. Por outro lado, as campanhas de conscientização na mídia demonstraram ser o tipo de medida com menor potencial para influenciar o comportamento dos motoristas. / Road traffic crashes are one of the main causes of death and disability worldwide, and it is believed that their share among these causes will grow in the future. The human factor contributes to over 90% of traffic crashes, and a great part of this contribution originates from human behaviour. This master’s thesis aimed to identify and characterize road safety measures according to their influence on driver behaviour, regarding the commitment of traffic offences. In order to do that, a qualitative and a quantitative survey were carried on. The qualitative survey was made with the Focus Group technique and was used to identify the traffic offences that contribute the most to road crashes, as well as to collect information to help preparing the quantitative survey. The last consisted in applying a self-reported questionnaire to automobile drivers from Porto Alegre, Brazil. As a result, the qualitative survey indicated that speeding, drunk driving and red light crossing are the traffic offences that contribute the most to road crashes. The quantitative survey allowed to conclude that the road safety measures with more influence on drivers, so they do not commit traffic offences, are those related to their rights restriction, like vehicle seizure or driver’s licence suspension, and to the possibility of being caught by authorities. On the other hand, road safety campaings on the media seemed to be the kind of measure with the smallest potential to influence driver behaviour.