The purpose of this master thesis was to investigate how effiecient the extractionof radiofrequency quality metrics from digital video broadcast (DVB) streamscan become using software defined radio. Software defined radio (SDR) is a fairlynew technology that offers you the possibility of very flexible receivers and transmitters where it is possible to upgrade the modulation and demodulation overtime. Agama is interested in SDR for use in the Agama Analyzer, a widely deployedmonitoring probe running on top of standard services. Using SDR, Agama coulduse that in all deployments, such as DVB by cable/terrestrial/satellite (DVBC/T/S), which would simplify logistics. This thesis is an implementation of a SDR to be able to receive DVB-C. TheSDR must perform a number of adaptive algorithms in order to prevent the received symbols from being significantly different from the transmitted ones. Themain parts of the SDR include timing recovery, carrier recovery and equalization.Timing recovery performs synchronization between the transmitted and receivedsymbols and the carrier recovery performs synchronization between the carrierwave of the transmitter and the local oscillator in the receiver. The thesis discusses various methods to perform the different types of synchronizations andequalizations in order to find the most suitable methods.

In this dissertation an in-depth study was conducted into the design, implementation and evaluation of a QPSK-based receiver structure for application in a UMTS WCDMA environment. The novelty of this work lies with the specific receiver architecture aimed to optimise the BER performance when possibly sparse data streams are transmitted. This scenario is a real possibility according to Verd´u et al [1] and Hagenauer et al [2–6]. A novel receiver structure was conceptualised, developed and evaluated in both narrowband and wideband scenarios, where it was found to outperform conventional receivers when a sparse data stream is transmitted. In order to reach the main conclusions of this study, it was necessary to develop a realistic simulation platform. The developed platform is capable of simulating a communication system meeting the physical layer requirements of the UMTS WCDMA standard. The platform can also perform narrowband simulations. A flexible channel emulator was developed that may be configured to simulate AWGN channel conditions, frequency non-selective fading (either Rayleigh or Rician with a configurable LOS component and Doppler spread), or a full multipath scenario where each path has a configurable LOS component, Doppler spread, path gain and path delay. It is therefore possible to even simulate a complex, yet realistic, COST207-TU channel model. The platform is also capable of simulating MUI. Each interfering user has a unique and independent multipath fading channel, while sharing the same bandwidth. Finally, the entire platform executes all simulations in baseband for improved simulation times. The research outputs of this work are summarised below: <ul> <li>A parameter, the sparseness measure, was defined in order to quantify the level by which a data stream differs from an equiprobable data stream.</li> <li>A novel source model was proposed and developed to simulate data streams with a specified amount of sparseness.</li> <li>An introductory investigation was undertaken to determine the effect of simple FEC techniques on the sparseness of an encoded data stream.</li> <li>Novel receiver structures for both narrowband and wideband systems were proposed, developed and evaluated for systems where possibly sparse data streams may be transmitted.</li> <li>Analytic expressions were derived to take the effect of sparseness into account in communication systems, including expressions for the joint PDF of a BPSK branch, the optimal decision region of a detector in AWGN conditions as well as the BER performance of a communication system employing the proposed optimal receiver in both AWGN channel conditions as well as in flat fading channel conditions.</li> <li>Numerous BER performance curves were obtained comparing the proposed receiver structure with conventional receivers in a variety of channel conditions, including AWGN, frequency non-selective fading and a multipath COST207-TU channel environment, as well as the effect of MUI</li></ul>. AFRIKAANS : In hierdie verhandeling word ’n in-diepte studie gedoen rakende die ontwerp, implementasie en evaluasie van ’n KPSK-gebaseerde ontvanger struktuur wat in ’n UMTS WKVVT omgewing gebruik kan word. Die bydrae van hierdie werk lˆe in die spesifieke ontvanger argitektuur wat daarop mik om die BFT werksverrigting te optimeer wanneer yl data strome versend word. Hierdie is ’n realistiese moontlikheid volgens Verd´u et al [1] en Hagenauer et al [2–6]. ’n Nuwe ontvanger struktuur is gekonsepsualiseer, ontwikkel en evalueer vir beide noueband en wyeband stelsels, waar dit gevind is dat dit beter werksverrigting lewer as tradisionele ontvangers wanneer yl data strome versend word. Dit was nodig om ’n realistiese simulasie platform te ontwikkel om die belangrikste gevolgtrekkings van hierdie studie te kan maak. Die ontwikkelde platform is in staat om ’n kommunikasie stelsel te simuleer wat aan die fisiese laag vereistes van die UMTS WKVVT standaard voldoen. Die platform kan ook noueband stelsels simuleer. ’n Aanpasbare kanaal simulator is ontwikkel wat opgestel kan word om SWGR kanaal toestande, plat duining (beide Rayleigh of Ricies met ’n verstelbare siglyn komponent en Doppler verspreiding), sowel as ’n veelvuldige pad omgewing (waar elke unieke pad ’n verstelbare siglyn komponent, Doppler verspreiding, pad wins en pad vertraging het) te emuleer. Dit is selfs moontlik om ’n komplekse, maar steeds realistiese COST207-TU kanaal model te simuleer. Die platform het ook die vermo¨e om VGS te simuleer. Elke steurende gebruiker het ’n unieke en onafhanklike veelvuldige pad deinende kanaal, terwyl dieselfde bandwydte gedeel word. Laastens, alle simulasies van die platvorm word in basisband uitgevoer wat verkorte simulasie periodes verseker. Die navorsingsuitsette van hierdie werk kan as volg opgesom word: <ul> <li>’n Parameter, die ylheidsmaatstaf, is gedefin¨ýeer om dit moontlik te maak om die vlak waarmee die ylheid van ’n datastroom verskil van ’n ewekansige stroom te versyfer.</li> <li>’n Nuwe bronmodel is voorgestel en ontwikkel om datastrome met ’n spesifieke ylheid te emuleer.</li> <li>’n Inleidende ondersoek is onderneem om vas te stel wat die effek van VFK tegnieke op die ylheid van ’n enkodeerde datastroom is.</li> <li>Nuwe ontvanger strukture is voorgestel, ontwikkel en evalueer vir beide noueband en wyeband stelsels waar yl datastrome moontlik versend kan word.</li> <li>Analitiese uitdrukkings is afgelei om die effek van ylheid in ag te neem in kommunikasie stelsels. Uitdrukkings vir onder andere die gedeelte WDF van ’n BFVK tak, die optimale beslissingspunt van ’n detektor in SWGR toestande, sowel as die BFT werksverrigting van ’n kommunikasie stelsel wat van die voorgestelde optimale ontvangers gebruik maak, hetsy in SWGR of in plat duinende kanaal toestande.</li> <li>Talryke BFT werksverrigting krommes is verkry wat die voorgestelde ontvanger struktuur vergelyk met die konvensionele ontvangers in ’n verskeidenheid kanaal toestande, insluitend SWGR, plat duinende kanale en ’n veelvuldige pad COST207-TU kanaal omgewing, sowel as in die teenwoordigheid van VGS.</li></ul></p Copyright / Dissertation (MEng)--University of Pretoria, 2010. / Electrical, Electronic and Computer Engineering / unrestricted