No description available.

No description available.

No description available.

Poly(vinylidene fluoride) PVDF is a semi-crystalline fluoropolymer that attracted researchers' attention more than a decade ago due to its remarkable properties, such as mechanical strength, thermal stability, chemical resistance, good processability, and excellent aging resistance. Due to these excellent properties, PVDF is applied in many applications such as membranes and filtration, biomedical applications, drug delivery, batteries, energy generation, energy storage, sensors, actuators, and energy harvesting applications. The dissertation was inspired by PVDF’s outstanding properties and applications. First of all, the effect of chain topology of on the crystallization and polymorphism between linear and star PVDF homopolymers were studied. Well-defined linear and stars PVDF homopolymers architectures were synthesized by reversible addition−fragmentation chain transfer (RAFT) polymerization. The non-isothermal crystallization study showed an increase in the amount of ferroelectric β-phase with respect to the paraelectric α-phase as the number of arms in the PVDF stars increases. This finding is explained by the increased topological complexity in the stars of several arms, which leads to the preferential formation of the less thermodynamically stable ferroelectric β-phase. Moreover, the isothermal crystallization kinetics of the PVDF stars was faster than the linear PVDF as a result of their speedier nucleation. Secondly, we report the synthesis of poly(n-isopropylacrylamide)-b-poly(vinylidene fluoride) (PNIPAM-b-PVDF), amphiphilic block copolymers with linear and star architectures by RAFT sequential living polymerization. Due to the presence of a lower critical solution temperature (LCST) for PNIPAM (coil-globule transition around 32 °C), the synthesized PNIPAM-b-PVDF block copolymers have thermo-responsive behavior, therefore, potential application in the fabrication of thermo-responsive membranes. All fabricated membranes by nonsolvent-induced phase separation (NIPS) method exhibited thermo-responsive behavior with water permeability and PEG rejection experiments. Moreover, the several heating-cooling cycles showed that the thermal-responsive behavior of these membranes are reversible and stable. Finally, a suggested potential future work is given to synthesize other PVDF-based block copolymers via sequential living polymerizations.

No description available.

Fullerenhaltige Bulk-Heterojunction-Solarzellen auf Polymerbasis zeigen derzeit eine geringe Langzeitstabilität, die unter anderem auf der Entmischung der Bulkphasen beruht. In dieser Arbeit wurden daher auf neuartige Weise Blockcopolymere entwickelt, die zur Stabilisierung der Phasen dienen können. Ausgehend von Poly-3-hexylthiophen-Makroinitiatoren wurde ein zweiter Block mit reaktivem Comonomer polymerisiert, das zur Anbindung von reinem Fullerens bzw. von Fullerenderivaten diente. Die fullerenfunktionalisierten Polymere wurden in Modell-Systeme eingemischt und zeigten erste Verbesserungen bezüglich der Phasenstabilisierung.:1 Einleitung und Zielstellung 2 Grundlagen 2.1 Polymere Solarzellen 2.1.1 Theoretische Grundlagen und Funktionsweise 2.1.2 Materialien und Materialoptimierung 2.1.3 Stabilisierung der Blendmorphologien 2.2 Blockcopolymere – Eigenschaften und Aufbau 2.2.1 Kontrolliert radikalische Polymerisationen 2.2.2 Kumada-Catalyst Transfer Polycondensation 2.3 Fullerene – Eigenschaften und Funktionalisierung 3 Ergebnisse und Diskussion 3.1 Darstellung von Akzeptor-Polymeren 3.1.1 Synthese der Copolymere 3.1.2 Bingel-Reaktion 3.1.3 Polymeranaloge Reaktionen und Anbindung von Fullerenen an Copolymere 3.2 Synthesen von Donor-Akzeptor-Blockcopolymeren 3.2.1 Synthese und Charakterisierung des Makroinitiators und der Blockcopolymere 3.2.2 Polymeranaloge Reaktionen an Blockcopolymeren 3.3 Charakterisierung der Eigenschaften von Donor-Akzeptor-Blockcopolymeren in Blends 3.3.1 Blends mit fullerenhaltigen Blockcopolymeren 3.3.2 Blends mit azidfunktionalisiertem Blockcopolymer 3.3.3 Solarzellen-Tests 4 Zusammenfassung und Ausblick 5 Experimenteller Teil 5.1 Verwendete Chemikalien und Reagenzien 5.2 Geräte und Hilfsmittel 5.3 Synthesen niedermolekularer Verbindungen 5.4 Polymersynthesen 5.5 Polymeranaloge Reaktionen 6 Literaturverzeichnis Anhang

Nanoporous organic polymers, including hypercrosslinked polymers (HCPs), covalent organic frameworks (COFs), polymers of intrinsic microporosity (PIMs), and conjugated microporous polymers (CMPs) etc., are considered good candidates for potential gas storage and gas separation applications. Porosities and surface areas of a series of semirigid alternating copolymers, which contained tert-butyl carboxylate-functionalized stilbene or tert-butyl carboxylate-functionalized styrene, and maleic anhydride or tert-butyl carboxylate-functionalized phenyl maleimide, were investigated using nitrogen sorption/desorption isotherms at 77 K and molecular simulations. These alternating copolymers were found to have Brunauer-Emmett-Teller (BET) surface areas in the range of 20-40 m2/g. Surface areas of these alternating copolymers increased as the steric crowding of the polymer backbone increased, which was the result of introducing extra phenyl rings and/or N-phenyl substituent maleimide units. Surface areas were found to increase as the persistence length increased. A series of HCPs containing functionalized stilbene and N-substituted phenyl maleimide were synthesized via free radical suspension polymerization. The incorporation of these functionalized, chain stiffening, Tg enhancing comonomers raised the Tgs of precursor polymers before they were crosslinked. Surface areas of these HCPs, obtained from nitrogen adsorption/desorption isotherms at 77 K, were up to 1058 m2/g. However, the surface areas of these HCPs were systematically lower than the controls. The high rigidity of the polymer backbone, which was the result of incorporating Tg enhancing comonomer, likely affected the chain mobility of the precursor polymer, decreased the efficiency of post-crosslinking reactions, and thus resulted in lower surface areas. Amine-functionalized styrene/stilbene polymers were prepared via free radical polymerization or post-modification. Amine-containing silica-based sorbents were prepared using the impregnation method. Sorption of CO2 by these materials was tested using TGA and compared with control samples. Both high amine content and certain levels of surface area were found to be important for a sorbent to achieve high CO2 uptake. Highest CO2 uptake (12 wt%) under our testing condition in these materials was achieved by an amine-containing silica sorbent. / Ph. D.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

The synthesis of dipyridyl functionalized polysulfones with improved hydrophilicity, enhanced membrane morphology and excellent ATRP polymeric ligand properties was conducted by the following method: (a) the formation of lithiated polysulfone from unmodified polysulfone and the subsequent reaction with 2,2'-vinylidenedipyridine in tetrahydrofuran at -78 oC under argon atmosphere to afford the corresponding dipyridyl functionalized polysulfone. The stoichiometry of the reaction affects the degree of functionalization of the product. When equimolar amounts of 2,2'-vinylidenedipyridine are added to the lithiated polysulfone, the degree of functionalization obtained was 45%. However, the addition of 10% and 20% molar excess of 2,2'-vinylidenedipyridine to the corresponding lithiated polysulfone produced dipyridyl functionalized polysulfones with degrees of functionalization of 80% and 95%, respectively; and (b) the membranes obtained from unmodified polysulfone as well as dipyridyl functionalized polysulfones were characterized by atomic force microscopy, scanning electron microscopy, pure water permeation measurements and contact angle measurements. Amine chain end functionalized polystyrene and poly(methyl methacrylate) were prepared by Atom Transfer Radical Polymerization (ATRP) methods as follows: (a) •-Aminophenyl functionalized polystyrene was prepared in quantitative yields by ATRP methods using a new primary amine functionalized initiator adduct, formed in situ by the reaction of 1-(4-aminophenyl)-1-phenylethylene and (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst in diethyl ether at 110 oC, for the polymerization of styrene.(b) New •-bis(aminophenyl) and •,ω-tetrakis(aminophenyl) functionalized polymers were prepared in quantitative yields by the ATRP method using the following synthetic strategy: (i) the initiation of styrene polymerization with a new primary diamine functionalized initiator adduct, generated in situ by the reaction of stoichiometric amounts of 1,1-bis(4-aminophenyl)ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst, afforded •-bis(aminophenyl) functionalized polystyrene; and (ii) •-bis(aminophenyl) functionalized poly(methyl methacrylate) was prepared by the ATRP method using the primary diamine functionalized initiator adduct as initiator for methyl methacrylate polymerization; and (iii) well defined •,ω-tetrakis(aminophenyl) functionalized polystyrene was prepared by the post ATRP chain end modification reaction of •-bis(aminophenyl) functionalized polystyrene with 1,1-bis(4-aminophenyl)-ethylene at the completion of the polymerization reaction. (c) Similarly, •-bis(4-dimethylaminophenyl) functionalized polystyrene was prepared by using a new tertiary diamine functionalized initiator adduct, formed in situ by treatment of equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]-ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as the catalyst in diphenyl ether at 110 oC for the initiation of styrene polymerization by the ATRP method. Furthermore, the ATRP of methyl methacrylate, initiated by the new tertiary diamine functionalized initiator adduct, produced •-bis(4-dimethylaminophenyl) functionalized poly(methyl methacrylate). In addition, •,ω-tetrakis(4-dimethylaminophenyl) functionalized polystyrene was synthesized via a post ATRP chain end modification reaction of •-bis(4-dimethylaminophenyl) functionalized polystyrene with equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]ethylene at the completion of the polymerization process. vi Quantitative yields of the different amine functionalized polymers with predictable number average molecular weights (Mn = 1.3 x 103 – 16.4 x103 g/mol), narrow molecular weight distributions (Mw/Mn = 1.03 – 1.29) and controlled chain end functionality were obtained. Polymerization kinetics data was employed to determine the controlled/living character of each ATRP reaction leading to the formation of the different amine chain end functionalized polymers. The polymerization processes were monitored by gas chromatographic analyses. Polymerization kinetics measurements for all reactions show that the polymerizations follow first order rate kinetics with respect to monomer consumption. The number average molecular weight of the amine functionalized polymers increases linearly with percentage monomer conversion and polymers with narrow molecular weight distribution were obtained. The ATRP of styrene, catalyzed by a novel dipyridyl functionalized polysulfone/CuBr supported catalyst system, afforded well defined polystyrene with predictable number average molecular weight and narrow molecular weight distribution in a controlled/living free radical polymerization process. The substituted 1,1-diphenylethylene initiator precursor derivatives and the functionalized polymers were characterized by nuclear magnetic resonance spectrometry, fourier transform infrared spectroscopy, thin layer chromatography, column chromatography, size exclusion chromatography, non-aqueous titrations, differential scanning calorimetry and thermogravimetrical analysis. / Chemistry / M. Sc. (Chemistry)