Spelling suggestions: "subject:"deals time systems"" "subject:"dealt time systems""
11 |
Processor pipelines and static worst-case execution time analysis /Engblom, Jakob, January 2002 (has links)
Diss. Uppsala : Univ., 2002.
|
12 |
SysMon – A framework for monitoring and measuring real-time propertiesPettersson, Andreas, Nilsson, Fredrik January 2012 (has links)
ABB SA Products designs and manufactures complex real-time systems. The real-time properties of the system are hard to measure and test especially in the long run, e.g. monitoring a system for months out in the real environment. ABB have started developing their own tool called JobMon for monitoring timing requirements, but they needed to measure more properties than time and in a more dynamic way than JobMon is constructed today. The tool must be able to measure different kind of data and be able to be monitor as long as the system itself. This thesis first does a survey and evaluation on existing commercial tools and if there exists a tool that can be integrated to the system and fulfill all demands. Different trace recorders and system monitoring tools are presented with its properties and functions. The conclusion is that there is no such tool and the best solution is to design and develop a new tool. The result is SysMon, a dynamic generic framework for measuring any type of data within a real-time system. The main focus for measuring during this thesis is time measurements, but no limits or assumptions of data types are made, and during late steps of the development new types of measurements are integrated. SysMon can also handle limits for measurements and, if required, take pre-defined actions e.g. triggering a logging function and saving all information about the measurement that passed the limit. The new tool is integrated to the system and evaluated thoroughly. It is an important factor to not steal too much resource from the system itself, and therefore a measurement of the tool’s intrusiveness is evaluated. / ABB SA Products designar och konstruerar komplexa realtidssystem. Realtidsegenskaperna för systemen är svåra att mäta och testa, speciellt under långa tidsperioder, t.ex. under drift i dess riktiga miljö under månader av online tid. ABB SA Products har börjat utvecklat ett eget verktyg, JobMon, för att kunna övervaka och mäta egenskaper i form av tid. Men behovet är större än att endast mäta tid och alla möjliga slags data behöver övervakas och utvärderas. Det här examensarbetet gör först en undersökning och utvärdering av existerande kommersiella verktyg och om det redan finns ett verktyg som uppfyller alla krav. Olika tracerecorders och systemövervakningsverktyg är presenterade med dess egenskaper och funktioner. Slutsatsen är till sist att det inte finns något existerande verktyg och att den bästa lösningen är att utveckla ett nytt verktyg. Resultatet är SysMon, ett dynamisk generisk ramverk för att mäta vilken form av data som helst. Huvudfokus under examensarbetet är tidsmätningar, men inga antaganden om vilka datatyper som kan användas görs. Under den senare delen av examensarbetet implementeras också en ny typ av mätning i system ticks. SysMon kan också hantera gränser för mätningar och, om nödvändigt, exekvera fördefinierade funktioner, t.ex. trigga en loggning och spara nödvändig information om mätningen som överskred gränsen. Det nya verktyget blir integrerat i systemet och testat noggrant. Det är viktigt att verktyget inte tar för mycket resurser från det normala systemet och därför utförs även en utvärdering av hur resurskrävande verktyget är.
|
13 |
Execution time analysis for dynamic real-time systemsZhou, Yongjun January 2002 (has links)
No description available.
|
14 |
Parallelizing Trusted Execution Environments for Multicore Hard Real-Time SystemsMishra, Tanmaya 05 June 2019 (has links)
Real-Time systems are defined not only by their logical correctness but also timeliness. Modern real-time systems, such as those controlling industrial plants or the flight controller on UAVs, are no longer isolated. The same computing resources are shared with a variety of other systems and software. Further, these systems are increasingly being connected and made available over the internet with the rise of Internet of Things and the need for automation. Many real-time systems contain sensitive code and data, which not only need to be kept confidential but also need protection against unauthorized access and modification. With the cheap availability of hardware supported Trusted Execution Environments (TEE) in modern day microprocessors, securing sensitive information has become easier and more robust. However, when applied to real-time systems, the overheads of using TEEs make scheduling untenable. However, this issue can be mitigated by judiciously utilizing TEEs and capturing TEE operation peculiarities to create better scheduling policies. This thesis provides a new task model and scheduling approach, Split-TEE task model and a scheduling approach ST-EDF. It also presents simulation results for 2 previously proposed approaches to scheduling TEEs, T-EDF and CT-RM. / Master of Science / Real-Time systems are computing systems that not only maintain the traditional purpose of any computer, i.e, to be logically correct, but also timeliness, i.e, guaranteeing an output in a given amount of time. While, traditionally, real-time systems were isolated to reduce interference which could affect the timeliness, modern real-time systems are being increasingly connected to the internet. Many real-time systems, especially those used for critical applications like industrial control or military equipment, contain sensitive code or data that must not be divulged to a third party or open to modification. In such cases, it is necessary to use methods to safeguard this information, regardless of the extra processing time/resource consumption (overheads) that it may add to the system. Modern hardware support Trusted Execution Environments (TEEs), a cheap, easy and robust mechanism to secure arbitrary pieces of code and data. To effectively use TEEs in a real-time system, the scheduling policy which decides which task to run at a given time instant, must be made aware of TEEs and must be modified to take as much advantage of TEE execution while mitigating the effect of its overheads on the timeliness guarantees of the system. This thesis presents an approach to schedule TEE augmented code and simulation results of two previously proposed approaches.
|
15 |
Real-Time Embedded Software Modeling and Synthesis using Polychronous Data Flow LanguagesKracht, Matthew Wallace 01 April 2014 (has links)
As embedded software and platforms become more complicated, many safety properties are left to simulation and testing. MRICDF is a formal polychronous language used to guarantee certain safety properties and alleviate the burden of software development and testing. We propose real-time extensions to MRICDF so that temporal properties of embedded systems can also be proven. We adapt the extended precedence encoding technique of Prelude and expand upon current schedulability analysis techniques for multi-periodic real-time systems. / Master of Science
|
16 |
An Integrated Real-Time and Security Scheduling Framework for CPSKansal, Kriti 18 May 2023 (has links)
In the world of real-time systems (RTS), security has often been overlooked in the design process. However, with the emergence of the Internet of Things and Cyber-Physical Systems, RTS are now frequently used in interconnected applications where data is shared regularly.
Unfortunately, this increased connectivity has also led to a larger attack surface. As a result, it is crucial to redesign RTS to not only meet real-time requirements but also to be resilient to threats. To address this issue, we propose a new real-time security co-design task model, and an accompanying scheduling framework, where schedulability can be used to indicate whether both real-time and security requirements are met. Our algorithm is designed to be flexible, allowing different security mechanisms to be used along with real-time tasks. Specifically, we augment the frame-based task model by introducing an n-dimensional security matrix, which serves as a powerful tool to enable our approach. This matrix clearly indicates which defense mechanisms are available for each task in the system by storing the worst-case execution times of tasks. Then, we transform the problem of maximizing security, subject to schedulability, into a variant of the knapsack problem. To make this approach more practical, we implement a fully polynomial time approximation scheme (FPTAS) that reduces the time complexity of solving the knapsack problem from a pseudo-polynomial to a fully polynomial. We also experiment with a greedy-heuristic approach and compare the results of both algorithms. / Master of Science / Real-time systems are computer systems that need to respond to events in a timely manner.
In the past, these systems were designed without much consideration for security. However, with the increasing use of interconnected devices and systems, it has become important to make sure that real-time systems are secure and protected against malicious attacks. To address this issue, we propose a new approach for designing real-time systems that prioritizes security from the very beginning. Our approach allows for different security tasks to be executed depending on the system's needs, and we use a two-dimensional security matrix to help with this. We also introduce a way to solve the security problem that is faster and more efficient than previous methods. Our experimental results show that our new approach significantly reduces the time and effort required to solve the security problem while still producing good results.
|
17 |
ARCHITECTURE-AWARE HARD-REAL-TIME SCHEDULING ON MULTI-CORE ARCHITECTURESShekhar, Mayank 01 December 2014 (has links)
The increasing dependency of man on machines have led to increase computational load on systems. The increasing computational load can be handled to some extent by scaling up processor frequencies. However, this approach has hit a frequency and power wall and the increasing awareness towards green computing discourages this solution. This leads us to use multi-core architectures. Due to the same reason, real-time systems are also migrating from single-core towards multi-core systems. While multi-core systems provide scalable high computational power, they also expose real-time systems to several challenges. Most of these challenges hamper the key property of real-time systems, i.e., predictability. In this work, we address some challenges imposed by multi-core architectures on real-time systems. We propose and evaluate several scheduling algorithms and demonstrate improved predictability and performance over existing methods. A unifying them in all our algorithms is that we explicitly consider the effects of architectural factors on the scheduling and schedulablity of real-time programs. As a case study, we use Tilera's TilePro64 platform as an example multi-core platform and implement some of our algorithms on this platform. Through this case study, we derive several useful conclusions regarding performance, predictability and practical overheads on a multi-core architecture.
|
18 |
Certification of real-time performance for dynamic, distributed real-time systemsHuh, Eui-Nam January 2002 (has links)
No description available.
|
19 |
Software engineering : testing real-time embedded systems using timed automata based approachesAbou Trab, Mohammad January 2012 (has links)
Real-time Embedded Systems (RTESs) have an increasing role in controlling society infrastructures that we use on a day-to-day basis. RTES behaviour is not based solely on the interactions it might have with its surrounding environment, but also on the timing requirements it induces. As a result, ensuring that an RTES behaves correctly is non-trivial, especially after adding time as a new dimension to the complexity of the testing process. This research addresses the problem of testing RTESs from Timed Automata (TA) specification by the following. First, a new Priority-based Approach (PA) for testing RTES modelled formally as UPPAAL timed automata (TA variant) is introduced. Test cases generated according to a proposed timed adequacy criterion (clock region coverage) are divided into three sets of priorities, namely boundary, out-boundary and in-boundary. The selection of which set is most appropriate for a System Under Test (SUT) can be decided by the tester according to the system type, time specified for the testing process and its budget. Second, PA is validated in comparison with four well-known timed testing approaches based on TA using Specification Mutation Analysis (SMA). To enable the validation, a set of timed and functional mutation operators based on TA is introduced. Three case studies are used to run SMA. The effectiveness of timed testing approaches are determined and contrasted according to the mutation score which shows that our PA achieves high mutation adequacy score compared with others. Third, to enhance the applicability of PA, a new testing tool (GeTeX) that deploys PA is introduced. In its current version, GeTeX supports Control Area Network (CAN) applications. GeTeX is validated by developing a prototype for that purpose. Using GeTeX, PA is also empirically validated in comparison with some TA testing approaches using a complete industrial-strength test bed. The assessment is based on fault coverage, structural coverage, the length of generated test cases and a proposed assessment factor. The assessment is based on fault coverage, structural coverage, the length of generated test cases and a proposed assessment factor. The assessment results confirmed the superiority of PA over the other test approaches. The overall assessment factor showed that structural and fault coverage scores of PA with respect to the length of its tests were better than the others proving the applicability of PA. Finally, an Analytical Hierarchy Process (AHP) decision-making framework for our PA is developed. The framework can provide testers with a systematic approach by which they can prioritise the available PA test sets that best fulfils their testing requirements. The AHP framework developed is based on the data collected heuristically from the test bed and data collected by interviewing testing experts. The framework is then validated using two testing scenarios. The decision outcomes of the AHP framework were significantly correlated to those of testing experts which demonstrated the soundness and validity of the framework.
|
20 |
Structural System-Level Testing of Embedded Real-Time SystemsSundmark, Daniel January 2008 (has links)
<p>People make mistakes. Software engineers are no exception to this fact. When software engineers make mistakes, these manifest in the form of buggy software - a major problem in today's industry. The existence of bugs is commonly detected using testing, the process of executing the software and checking if its behaviour complies with the specification. As limitations in time make testing of the entire software behaviour impracticable, testers need to make informed decisions on how to test the software to detect as many bugs as possible.</p><p>In the realm of real-time systems (RTSs), software testing is made more difficult by non-deterministic factors such as interaction with the surrounding environment, (pseudo)parallelism, and timing requirements. Furthermore, RTS testing suffers from behaviour-altering perturbation from the instrumentation inserted in the system to keep track of test progress (i.e., probe effects).</p><p>In our work, we analyse the main test criteria used for traditional software testing in order to see which of these scale to, and assist in, system-level testing of multi-tasking RTSs. We focus on one of these criteria, the all definition-use paths coverage criterion, as it highlights a central aspect of non-deterministic task interaction, and investigate what is specifically required for applying this criterion to testing of multi-tasking RTSs. Further, we examine the possibility of using execution replay for probe effect-free test monitoring. We evaluate this approach in real industrial settings by means of case studies.</p><p>The contributions of this thesis are twofold: First, the use of structural test criteria in RTS system-level testing is facilitated by two different analysis methods. Second, the probe effect is handled by recording non-deterministic events during run-time, and by using this recording to create a monitorable deterministic replica of the first execution. By these contributions, this thesis shows how the non-determinism of multi-tasking RTSs can be handled during system-level testing.</p>
|
Page generated in 0.0948 seconds