A non-contacting steel plate conveyance system based on the linear induction motor scheme, which can provide lift and propulsive forces simultaneously, is proposed. It has the features of high power density, direct drive, simple mechanical structure, and being able to reduce the operation noise. A magnetic equivalent circuit method and electromagnetic theory incorporating with 3-D finite element analysis are involved to investigate the static and quasi-dynamic properties and confirm the electrical and mechanical designs. To realize the dynamic behavior and develop the closed-loop control, a proper stationary reference frame transformation of the system voltage equations is also introduced. By considering the practical operational environment, a fuzzy-based control structure integrated with remote optical measurement system has been established and implemented by a DSP-based controller combined with required peripheral circuits. The experimental results show the applicability of such control strategies. With the systematic procedures for design, analysis, and control provided in this dissertation, implementation feasibility of the proposed system can be conveniently demonstrated.

Les estimations des mouvements de soi provenant des signaux vestibulaires contribuent à la planification et l’exécution des mouvements volontaires du bras lorsque le corps se déplace. Cependant, comme les senseurs vestibulaires sont fixés à la tête alors que le bras est fixé au corps, les signaux vestibulaires doivent être transformés d’un système de référence centré sur la tête à un système centré sur le corps pour pouvoir contribuer de façon appropriée au contrôle moteur du bras. Le but premier de ce travail était d’étudier l’évidence d’une telle transformation. La stimulation galvanique vestibulaire (SGV) a été utilisée pour activer les afférences vestibulaires et simuler une rotation autour d’un axe naso-occipital fixe pendant que des sujets humains faisaient des mouvements du bras dans le plan horizontal, avec la tête dans différentes orientations. Une transformation des signaux vestibulaires implique que la SVG devrait simuler une rotation autour d’un axe horizontal lorsque la tête est droite et autour d’un axe vertical lorsque la tête est en flexion antérieure. La SGV devrait ainsi perturber les mouvements du bras en fonction de l’orientation de la tête. Nos résultats démontrent que les signaux vestibulaires contribuant aux mouvements d’atteinte sont effectivement transformés en un système de référence centrée sur le corps. Le deuxième but de ce travail était d’explorer les mécanismes utilisant ces signaux vestibulaires transformés. En comparant les effets de la SGV appliquée avant ou pendant les mouvements d’atteinte nous avons montré que les signaux vestibulaires transformés contribuent à des mécanismes de compensation distincts durant la planification des mouvements d’atteinte comparativement à l’exécution. / Vestibular signals provide self-motion estimates that contribute to the planning and execution of voluntary reaching movements during body motion. However, because the vestibular sensors are fixed in the head whereas the arm is fixed to the trunk vestibular signals must be transformed from a head-centered to a body-centered reference frame to contribute appropriately to limb motor control. The first goal of the current work was to investigate the evidence for such a transformation. To do so we used galvanic vestibular stimulation (GVS) to selectively activate vestibular afferents and simulate rotation about a fixed roughly naso-occipital axis as human subjects performed reaching movements with the head in different orientations. If vestibular signals that contribute to reaching are transformed to body-centered coordinates, then with the head upright GVS should simulate mainly tilt about an earth-horizontal axis (roll), whereas with the head pitched forward the same stimulus should simulate rotation about an earth-vertical axis (yaw). We therefore predicted that GVS should perturb horizontal-plane reach trajectories in a head-orientation dependent manner. Our results demonstrate that vestibular signals which contribute to reaching are indeed transformed to a body-centered reference frame. The second goal of this work was to explore the mechanisms that use these transformed vestibular signals. By comparing the effect of GVS applied during versus prior to reaching we also provide evidence that transformed vestibular signals contribute to distinct compensation mechanisms for body motion during reach planning versus execution.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-04-20T13:39:03Z No. of bitstreams: 1 pedromachadodealmeida.pdf: 13436160 bytes, checksum: 84c66613dade0766ae9ea2bdc8be9f91 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-04-20T14:45:37Z (GMT) No. of bitstreams: 1 pedromachadodealmeida.pdf: 13436160 bytes, checksum: 84c66613dade0766ae9ea2bdc8be9f91 (MD5) / Made available in DSpace on 2017-04-20T14:45:37Z (GMT). No. of bitstreams: 1 pedromachadodealmeida.pdf: 13436160 bytes, checksum: 84c66613dade0766ae9ea2bdc8be9f91 (MD5) Previous issue date: 2011-04-29 / Esta dissertação apresenta uma estratégia de controle para sistemas de geração fotovoltaicos, de único estágio, trifásicos, conectados à rede elétrica de distribuição. São desenvolvidos modelos matemáticos para representar as características dinâmicas dos painéis fotovoltaicos, do conversor fonte de tensão (VSC -“Voltage Source Converter”) e da rede de distribuição. A modelagem do sistema de geração disperso (SGD) é feita no sistema de coordenadas síncrono (dq), fornecendo um sistema de equações diferenciais que pode ser usado para descrever o comportamento dinâmico do sistema quando as tensões da rede estão equilibradas ou desequilibradas. O conversor é controlado no modo de corrente, através da estratégia de modulação vetorial (Space Vector Modulation - SVM). São projetadas duas malhas de controle em cascata para controlar o conversor estático. A malha interna controla a corrente injetada na rede enquanto que a externa controla a tensão no barramento CC do conversor. O controle da tensão CC permite rastrear o ponto de máxima potência do painel PV além de controlar a quantidade de potência ativa injetada na rede CA. Um método ativo de detecção de ilhamento baseado na injeção de corrente de sequência negativa é incorporado ao sistema de controle. Resultados de simulações digitais obtidos com o programa ATP (Alternative Transient Program ) são utilizados para validar os modelos matemáticos e as estratégias de controle. Finalmente, um protótipo experimental de pequena escala é montado em laboratório. Todo o sistema de controle do protótipo experimental foi implementado no DSP TMS320F28212. Os resultados obtidos demonstram o funcionamento do sistema e podem ser usados para validar a estratégia de controle utilizada. / This dissertation presents a control strategy for a single-stage, three-phase, photovoltaic systems to be connected to a distribution network. Mathematical models are developed to represent the dynamic characteristics of the photovoltaic panels, the voltage-source converter (VSC) and the distribution network. The modeling of the dispersed generation system (DGS) is done in the synchronous reference frame (dq), providing a system of differential equations that describes the dynamic behavior of the system when the network voltages are balanced or unbalanced. The converter is controlled in current mode through the space vector modulation (SVM) strategy. Two control loops are designed to control the static converter. The inner loop controls the injected current into the network while the external loop controls the converter DC bus voltage. The DC voltage regulator allows to track the PV maximum power point and to control the active power injected into the AC grid. An active islanding detection method based on negative-sequence current injection is incorporated into the control system. Digital simulations results obtained with Alternative Transients Program (ATP) is used to validate the mathematical models and the control strategies. Finally, a small-scale experimental prototype is implemented in the laboratory. The whole control system of the experimental prototype was programmed in DSP TMS320F2812 of Texas Instruments. The results demonstrate that the operation of the system can be used to validate the applied control strategy.