Spelling suggestions: "subject:"reinforced concreteinformation."" "subject:"reinforced concretecomposition.""
21 |
Reliability assessment of flexural cracking resistance of reinforced concrete retaining structuresCho, Wah-fu, Gordon, 曹華富 January 1979 (has links)
published_or_final_version / Civil Engineering / Master / Master of Philosophy
|
22 |
The development of a field procedure for determining the chloride content of concrete and an analysis in the variability of the effective diffusion constantHerald, Stephen Estel January 1989 (has links)
During the initial phase of the investigation, four methods were selected for investigation from a review of literature sources,the specific ion probe, spectrophotometer, digital titrator, and Quantab titrator strips.
The initial results from the laboratory testing procedure and evaluation based on cost, speed, accuracy, and level of expertise required indicated the specific ion probe was more suitable for use in the field when compared to the remaining methods selected.
Effects of cement content and reaction temperature on the results obtained for the specific ion probe were also investigated. Results of the tests for the effects of cement content were somewhat inconclusive, but indicated more variability in the results as the amount of chloride present in the specimens increased. However, correlation between the increase in variability and i cement content was not indicated. The specific ion probe is affected by differences in temperature and the appropriate correction factor for the variation was determined.
Field validation of the procedure was undertaken to substantiate the findings from the laboratory investigation. This was accomplished by subjecting the specific ion probe to testing specimens from bridges located in different exposure groups within the United States. Four bridges were tested for chloride content in Pennsylvania. Following this initial phase, three bridges were tested in Virginia, Florida, and Wisconsin respectively.
An analysis of the variability in the effective diffusion constant for the bridges tested was also performed to determine any relationships which exist between different exposure groups and to determine effects of time. / Master of Science
|
23 |
Evaluation of Chloride Threshold for Steel Fiber Reinforced Concrete Composited in Aggressively Corrosive EnvironmentsUnknown Date (has links)
Highway drainage pipes utilize concrete reinforced with steel wire to help mitigate water,
earth, and traffic loads. Drainage pipes reinforced with zinc electroplated steel fibers
offer a lower steel alternative to traditional steel wire cage reinforcements. The objective
of the thesis research was to determine the physical and electrochemical characteristics of
zinc electroplated steel fiber corrosion propagation. Experimental programs include:
Fracture analysis of zinc electroplated steel fibers embedded in dry-cast concrete pipes
exposed to varying chloride concentrations; Visual analysis of zinc electroplated steel
fibers embedded in concrete exposed to varying chloride concentrations; Electrochemical
analysis of zinc electroplated steel fibers embedded in concrete exposed to varying
chlorides; Chloride threshold determination for zinc electroplated steel fibers immersed
in simulated pore solution. Between the four experimental programs the most significant
conclusion is that oxygen, moisture, and chlorides past the chloride threshold must be
present for corrosion to propagate significantly on the zinc electroplated steel fibers. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection
|
24 |
Concrete diffusivity and its correlation with chloride deposition rate on concrete exposed to marine environmentsUnknown Date (has links)
The aim of this study was to investigate the diffusion of chloride ions into concrete samples that were exposed in scenarios that simulate the splash, tidal, atmospheric, and immersed portions of a marine structure. To study the atmospheric deposition, the project also investigated the relationship between chloride ion deposition on the wet candle and its accumulation into concrete samples. Results from the wet candle experiment indicated that between 2% and 45% of the chlorides deposited per square meter of exposed area could be found within the concrete samples. After 6 months, slag G1a blocks showed the most resistance to chloride penetration in the tidal and splash simulations. After 10 months of exposure, fly ash samples had the slowest rates of diffusion in the tidal simulation while the fly ash + silica fume samples and the slag samples measured similar rates of diffusion within the tidal zone. After 90 days of curing, cylinders composed of 20% fly ash & 8% silica fume measured the highest average resistivity values and were found to be less vulnerable to chloride ion penetration than the 20% fly ash and the 50% slag concrete through rapid migration tests. / by Victor Anthony Echevarria. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
25 |
Experimental evaluation of the durability of fly ash-based geopolymer concrete in the marine environmentUnknown Date (has links)
The construction industry is increasingly turning to the use of environmentally friendly materials in order to meet the sustainable aspect required by modern infrastructures. Consequently, for the last two decades, the expansion of this concept, and the increasing global warming have raised concerns on the extensive use of Portland cement due to the high amount of carbon dioxide gas associated with its production. The development of geopolymer concretes offers promising signs for a change in the way of producing concrete. However, to seriously consider geopolymer binders as an alternative to ordinary Portland cement, the durability of this new material should be evaluated in any comparative analysis. The main purpose of this study was to evaluate the durability characteristics of low calcium fly ash-based geopolymer concretes subjected to the marine environment, compared to ordinary Portland cement concrete with similar exposure. To achieve this goal, 8 molar geopolymer, 14 molar geopolymer and ordinary Portland cement concrete mixes were prepared and tested for exposure in seawater. Compressive strengths in the range of 2900 to 8700 psi (20-60 MPa) were obtained. The corrosion resistance performance of steel-reinforced concrete beams, made of these mixes, was also studied, using an accelerated electrochemical method, with submergence in salt water. The test results indicated that the geopolymer concrete showed excellent resistance to chloride attack, with longer time to corrosion cracking, compared to ordinary Portland cement concrete. / by Jean-Baptiste Edouard. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web.
|
26 |
Estimativa da profundidade de carbonatação do concreto com o uso de redes neuraisCarlos Alberto Cavalcanti Martins 31 March 2011 (has links)
O fenômeno da carbonatação, como agente desencadeador do processo de corrosão de armaduras, assume especial importância quando as estruturas de concreto armado
estão expostas a ambientes urbanos e à atmosfera poluída de gases como o CO2. O controle da profundidade de carbonatação do concreto exige o uso de ferramentas
(modelos matemáticos) que representem o comportamento das variáveis que interagem no processo da carbonatação do concreto de forma clara e objetiva no sentido de auxiliar a compreensão do fenômeno. Nessa perspectiva, desenvolveram-se modelos computacionais que conjugam problemas complexos de modo simples. Entre esses modelos, citam-se as redes neurais artificiais, que têm inspiração no cérebro humano e que possuem a habilidade de aprender e generalizar possibilitando a resolução de problemas complexos. Neste trabalho é estudada a aplicação de redes
neurais artificiais do tipo Perceptron multicamadas, com base no algoritmo de aprendizado supervisionado backpropagation, com o objetivo de obter um mapeamento entre as variáveis de entrada do problema relação água/cimento,
distância do corpo de prova do mar e idade do corpo de prova e a variável de saída de interesse profundidade de carbonatação do concreto. Os resultados obtidos
validam que os modelos de redes neurais artificiais se constituem numa importante ferramenta de avaliação da profundidade de carbonatação do concreto armado / The phenomenon of carbonation as the triggering agent in the process of reinforcement corrosion is particularly important when concrete structures are exposed to urban environments and the atmosphere contamination with gases such as CO2. The concrete carbonation depth control requires the use of tools (mathematical models) that represent the behavior of the variables that interact in the process of concrete carbonation in a clear and objective way to help understand the phenomenon. In this perspective, computer models have been developed to combine complex problems in a simple way. Among those models are the artificial neural networks, which have been inspired on human nervous system and have the ability to learn and
generalize, making it possible to solve complex problems. This work studied the application of artificial neural networks like multilayer perceptron, based on
backpropagation, supervised learning algorithm in order to obtain a mapping between the input variables of the problem ─ the water/cement (w/c) ratio, body of proof
distance from the sea and age of the body of proof ─ and the output variable of interest ─ the depth of concrete carbonation. The results validate that the use of
artificial neural networks is an important tool to evaluate concrete carbonation
|
27 |
Avaliação de cloretos pelo método de aspersão de solução de nitrato de prataClério Bezerra de França 13 June 2011 (has links)
A corrosão por cloretos é considerada por muitos pesquisadores a mais severa das manifestações patológicas que atacam as armaduras. O objetivo principal deste trabalho é avaliar a presença de cloretos livres em concreto de
cimento Portland pelo método de aspersão de solução de nitrato de prata. A verificação de ataque por cloreto na estrutura é normalmente feita através de exames laboratoriais, demorados em que apresentam um custo muito alto. Pesquisando a aplicabilidade do método de aspersão de nitrato de prata in loco, em materiais à base de cimento Portland como indicador com capacidade de informar a
presença ou não de contaminação por cloretos, evitando assim de imediato o teste laboratorial. Para que os resultados destes ensaios tivessem credibilidade quanto à presença de cloretos livres nas amostras, foi realizado, paralelamente à aspersão de nitrato de prata, um acompanhamento das amostras através de ensaios eletroquímicos. Observou-se com os resultados experimentais da pesquisa que a
aplicabilidade do método de aspersão de solução de nitrato de prata vem a ser de grande relevância para o meio técnico, por ser um método qualitativo, de fácil aplicação, barato e provendo informações rápidas para que os profissionais da área
de engenharia possam diagnosticar com segurança as estruturas com corrosão contaminadas por cloreto / The corrosion by chlorides is considered by a number of researchers the most dangerous pathological manifestation attacking concrete reinforcements. The assessment of the attacks to the structure by sodium chloride is usually done in the laboratory, takes too long and costs too much. The.main reason for this work is to assess the presence of free chlorides in Portland cement concrete and mortar
through the silver nitrate aspersion method, which is justified by the fact that Our objective is to evaluate the applicability of the silver nitrate aspersion method in loco, in Portland-cement-based materials as indicators capable of showing the presence or not of contamination by chlorides, avoiding the immediate need for lab tests. So as to give credibility to the test for presence of free chlorides in the samples, these were checked by means of electrochemical tests in parallel with the silver nitrate
aspersion. The experimental results of these tests showed that the applicability of the silver nitrate aspersion method seems to be of great relevance in the technical
environment, as it is a qualitative method, easily applicable, inexpensive and capable of providing quick information so that professionals can safely diagnose the levels of chloride corrosion in the structures
|
28 |
Dégradation du béton armé sous actions sévères : Etude du comportement résiduel de l’adhérence à l’aide de la technique d’émission acoustique / Degradation of reinforced concrete under severe actions : Study of residual behaviour of adherence using acoustic emission techniqueNguyen, Nhan Hoa 04 December 2014 (has links)
De nos jours, le béton est le matériau de construction le plus utilisé dans le monde en raison de ses performances mécaniques, sa facilité de mise en oeuvre, son coût compétitif et sa « recyclabilité ». Toutefois, compte tenu de son caractère fragile en terme mécanique et de sa faible résistance à la traction, il est souvent renforcé par des armatures métalliques qui lui confèrent une bonne ténacité et une meilleure aptitude à supporter les efforts de traction. Ce composite béton-armature ne peut cependant assurer efficacement son rôle que si les deux composants sont étroitement liés l’un à l’autre. C’est donc dans la qualité de l’adhérence que réside l’efficacité du transfert des efforts entre les deux matériaux. Or, dès la mise en place des ouvrages en béton armé et pendant toute la durée de leur exploitation, différentes actions et agents agresseurs peuvent modifier la qualité de cette adhérence. Il peut s’agir de phénomènes naturels comme le gel/dégel et l’action du dioxyde de carbone atmosphérique, ou des sollicitations accidentelles comme l’incendie ou encore l’action de certains agents spécifiques comme les chlorures et les sulfates. Notre objectif dans cette thèse est de qualifier les modifications d’adhérence qui résultent de quatre types de sollicitations couramment rencontrées dans la vie des ouvrages en béton armé: l’effet des températures élevées, l’effet de la carbonatation, l’effet des cycles gel/dégel, l’effet de la corrosion. Nous évaluons la qualité de l’adhérence par la mesure de la résistance à l’arrachement et par l’analyse du comportement résiduel sous sollicitation mécanique. La technique d’émission acoustique est utilisée pour localiser en temps réel, l’endommagement du matériau sous sollicitation. Les applications de notre étude concernent non seulement les armatures et inserts classiques du béton armé mais aussi les nombreux dispositifs constructifs des structures mixtes acier – béton qui utilisent les liaisons par goujons pour relier les deux matériaux. / Nowadays, concrete is the most used construction material in the world because of its mechanical performances, its ability to be molded or cast, its competitive cost and its recyclability. However, concrete has a low ductility and a relatively low tensile strength compared to other construction materials. Therefore, concrete is often reinforced by steel rebars to improve the ductility and tensile strength. Nevertheless, to make reinforced concrete being highly efficient material, the two components need to be correctly bonded each to other. The bond quality the efficiency of the force transfer between rebar and concrete surrounding ensures. In fact, since the casting of concrete and during the service life of reinforced concrete structure, various actions such corrosion action, freeze/thaw attack and chemical attack etc. may affect the bond quality. The objective of this PhD research work is to qualify the changes of adhesion property causing by four types of action which frequently takes place in the service life of reinforced concrete structures: the effect of high temperatures, the effect of carbonation, the effect of cycles freeze/thaw, the effect of corrosion. The concrete-rebar bond quality is evaluated by doing pull-out tests under static mechanical action and measuring the bond strength and analyzing residual behaviour. Moreover, the acoustic emission technique is used to locate the cracks and evaluate the cracking evolution in real time. The founding of this study can be also extended to apply to other concrete-steel structures like composite structures in which headed studs are used to connect steel profiles to concrete.
|
29 |
Estimativa da profundidade de carbonatação do concreto com o uso de redes neuraisMartins, Carlos Alberto Cavalcanti 31 March 2011 (has links)
Made available in DSpace on 2017-06-01T17:57:31Z (GMT). No. of bitstreams: 1
dissertacao_carlos_alberto.pdf: 1579628 bytes, checksum: ac1de165bd37e65d9cb3872ad819860e (MD5)
Previous issue date: 2011-03-31 / The phenomenon of carbonation as the triggering agent in the process of reinforcement corrosion is particularly important when concrete structures are exposed to urban environments and the atmosphere contamination with gases such as CO2. The concrete carbonation depth control requires the use of tools (mathematical models) that represent the behavior of the variables that interact in the process of concrete carbonation in a clear and objective way to help understand the phenomenon. In this perspective, computer models have been developed to combine complex problems in a simple way. Among those models are the artificial neural networks, which have been inspired on human nervous system and have the ability to learn and
generalize, making it possible to solve complex problems. This work studied the application of artificial neural networks like multilayer perceptron, based on
backpropagation, supervised learning algorithm in order to obtain a mapping between the input variables of the problem ─ the water/cement (w/c) ratio, body of proof
distance from the sea and age of the body of proof ─ and the output variable of interest ─ the depth of concrete carbonation. The results validate that the use of
artificial neural networks is an important tool to evaluate concrete carbonation / O fenômeno da carbonatação, como agente desencadeador do processo de corrosão de armaduras, assume especial importância quando as estruturas de concreto armado
estão expostas a ambientes urbanos e à atmosfera poluída de gases como o CO2. O controle da profundidade de carbonatação do concreto exige o uso de ferramentas
(modelos matemáticos) que representem o comportamento das variáveis que interagem no processo da carbonatação do concreto de forma clara e objetiva no sentido de auxiliar a compreensão do fenômeno. Nessa perspectiva, desenvolveram-se modelos computacionais que conjugam problemas complexos de modo simples. Entre esses modelos, citam-se as redes neurais artificiais, que têm inspiração no cérebro humano e que possuem a habilidade de aprender e generalizar possibilitando a resolução de problemas complexos. Neste trabalho é estudada a aplicação de redes
neurais artificiais do tipo Perceptron multicamadas, com base no algoritmo de aprendizado supervisionado backpropagation, com o objetivo de obter um mapeamento entre as variáveis de entrada do problema relação água/cimento,
distância do corpo de prova do mar e idade do corpo de prova e a variável de saída de interesse profundidade de carbonatação do concreto. Os resultados obtidos
validam que os modelos de redes neurais artificiais se constituem numa importante ferramenta de avaliação da profundidade de carbonatação do concreto armado
|
30 |
Disseminação de íons cloreto na orla marítima do bairro de Boa Viagem, Recife-PE / Dissemination of chloride íons in marine edge of Boa Viagem quarter, Recife-PERonaldo Bezerra Pontes 30 March 2006 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Diante da exposição à névoa salina, as estruturas em concreto podem sofrer ataques por cloretos, provocando corrosão das armaduras. As peças com faces voltadas aos ventos dominantes estão mais suscetíveis, especialmente aquelas que possuem grande superfície em relação ao volume, como são os casos de pilares e vigas. Este trabalho tem como objetivo avaliar os níveis de agressividade marinha, na orla marítima do Bairro de Boa Viagem, Recife-PE, em função de sua distância em relação ao mar, medindo a taxa de deposição de cloretos, pelo método da vela úmida, tendo como apoio o monitoramento do ambiente. Os resultados indicam que os íons cloreto chegam à superfície das estruturas a distintos níveis de concentração, dependendo da distância em relação à sua fonte geradora, no caso, o mar. Conclui-se que a deposição de cloretos decresce, numa relação do tipo exponencial, à medida que há um aumento do distanciamento em relação ao mar, e que a agressividade é significativa até 400 m da orla marítima / Exposing concrete structures to the saline mist, they can suffer chlorides attacks and could cause reinforcement corrosion. The structures parts with faces directed to dominant winds are more susceptible, especially those with great surface in relation to the volume, such as pillars and beams. This work objective is to evaluate the level of marine aggressiveness, in marine edge of Boa Viagem quarter, Recife-PE, in function of the distance to the sea, measuring the value of chloride deposition, using the wet candle method, with the support of the environment management. The results indicate that chloride ions reach surface structure in different levels of concentration, depending on the distance from its origin, in this case, the sea. The conclusion is that chloride deposition decreases, in an exponential relation, when there is an increase of the distance to the sea, and that aggressiveness is significantly as far as 400 m from the marine edge
|
Page generated in 0.0954 seconds