The realization of wavelength scale and sub-wavelength scale fabrication of integrated optical devices has led to a concurrent need for computational design tools that can accurately model electromagnetic phenomena on these length scales. This dissertation describes the physical, analytical, numerical, and software developments utilized for practical implementation of two particular frequency domain design tools: the modal method for multilayer waveguides and one-dimensional lamellar gratings and the Rigorous Coupled Wave Analysis (RCWA) for 1D, 2D, and 3D periodic optical structures and integrated optical devices. These design tools, including some novel numerical and programming extensions developed during the course of this work, were then applied to investigate the design of a few unique integrated waveguide and grating structures and the associated physical phenomena exploited by those structures. The properties and design of a multilayer, multimode waveguide-grating, guided mode resonance (GMR) filter are investigated. The multilayer, multimode GMR filters studied consist of alternating high and low refractive index layers of various thicknesses with a binary grating etched into the top layer. The separation of spectral wavelength resonances supported by a multimode GMR structure with fixed grating parameters is shown to be controllable from coarse to fine through the use of tightly controlled, but realizable, choices for multiple layer thicknesses in a two material waveguide; effectively performing the simultaneous engineering of the wavelength dispersion for multiple waveguide grating modes. This idea of simultaneous dispersion band tailoring is then used to design a multilayer, multimode GMR filter that possesses broadened angular acceptance for multiple wavelengths incident at a single angle of incidence. The effect of a steady-state linear loss or gain on the wavelength response of a GMR filter is studied. A linear loss added to the primary guiding layer of a GMR filter is shown to produce enhanced resonant absorption of light by the GMR structure. Similarly, linear gain added to the guiding layer is shown to produce enhanced resonant reflection and transmission from a GMR structure with decreased spectral line width. A combination of 2D and 3D modeling is utilized to investigate the properties of an embedded waveguide grating structure used in filtering/reflecting an incident guided mode. For the embedded waveguide grating, 2D modeling suggests the possibility of using low index periodic inclusions to create an embedded grating resonant filter, but the results of 3D RCWA modeling suggest that transverse low index periodic inclusions produce a resonant lossy cavity as opposed to a resonant reflecting mirror. A novel concept for an all-dielectric unidirectional dual grating output coupler is proposed and rigorously analyzed. A multilayer, single-mode, high and graded-index, slab waveguide is placed atop a slightly lower index substrate. The properties of the individual gratings etched into the waveguide's cover/air and substrate/air interfaces are then chosen such that no propagating diffracted orders are present in the device superstrate and only a single order is present outside the structure in the substrate. The concept produces a robust output coupler that requires neither phase-matching of the two gratings nor any resonances in the structure, and is very tolerant to potential errors in fabrication. Up to 96% coupling efficiency from the substrate-side grating is obtained over a wide range of grating properties.

Les filtres spectraux à réseaux résonants, ou GMRF (Guided-Mode Resonance Filters), sont une nouvelle génération de filtres à bande étroite et constituent une alternative très prometteuse aux filtres conventionnels multicouches Fabry-Pérot. Le pic de résonance d'un GMRF peut être très fin spectralement et de longueur d'onde de centrage accordable en fonction de l'angle d'incidence. Ces propriétés sont particulièrement importantes pour la spectroscopie. Les travaux antérieurs ont permis de mettre en œuvre une structure originale comportant deux réseaux 1D croisés. Les performances de ce filtre surpassent celles des filtres conventionnels par leur réponse spectrale subnanométrique, leur accordabilité, et leur capacité à s'affranchir de l'influence de la polarisation de l'onde incidente sous incidence oblique. Le but de ce travail est d'explorer les performances ultimes de ce type de dispositif en termes de résolution et taux de réjection, par une approche mêlant théorie, technologie et caractérisation. Nous présentons des résultats expérimentaux d'un filtre en réflexion indépendant de la polarisation, accordable sur 40 nm avec 8.3nm/° d'accordabilité, ayant une réflexion de 10-3 sur une plage de 90nm en dehors de la résonance et un facteur de qualité supérieur à 5000. / Guided Mode Resonance Filters ( GMRF ) are a new generation of narrowband optical filters and are a very promising alternative to conventional multilayer Fabry-Perot filters. The resonance peak of GMRF can be spectrally extremely thin and with a centering wavelength tunable according to the angle of incidence of the light. These properties are particularly important for spectroscopy. Previous works have helped to implement an original structure with two 1D crossed gratings. The performance of this filter overpasses those of conventional filters in their spectral subnanometric response, tunability and their ability to overcome the influence of the polarization of the incident wave under oblique incidence. The aim of this work is to explore the final performances of such devices in terms of resolution and rejection rate, thanks to an approach combining theory, fabrication technology and characterization. We present experimental results of a polarization independent reflective filter, tunable over 40nm with a tunability of 8.3nm / °, having a reflection of 10-3 on a 90nm range outside the resonance and a quality factor over 5000.