At the heart of the field of photonics is the control of the reflection and transmission of light. Plasmonics looks at this problem of control of electromagnetic radiation in the context of surface plasmon polaritons (SPP). SPPs are propagating electromagnetic modes localized at the interfaces between media with positive and negative permittivities. Their excitation can accompany the enhancement of transmission, reflection, or absorption of EM radiation. There are a number of ways to excite SPPs and this work looks at several geometries and analyzes the transmission and reflection characteristics using a numerical approach based on the finite element method.<p> The first method of excitation is by incident evanescent wave that was totally internally reflected from an earlier interface. It is shown that an evanescent wave can excite SPPs and create resonant transmisison. It is also found that high values of dissipation limit transmission and instead create resonant absorption. The second method involves the modulation of the negative permittivity of the plasma slab itself. Numerical results are compared to analytical ones and are in good agreement because harmonics of the solution above the first are negligible. An investigation of transmission through a plasma slab with a single thin diffraction grating placed nearby follows. Analytical and numerical calculations show that a single thin grating is sufficient to create transmission resonance. It is found that for large values of diffraction grating modulation parameter, higher harmonics, usually not accounted for in analytical solutions, results in discrepancies between analytical and numerical results. The next geometry considered is of a plasma layer with only part of it having modulated permittivity. The presence of modulation of only part of the plasma layer is shown to create transmission and reflection resonances. By tailoring parameters of the system, it is shown how the resonant frequencies can be shifted. The final geometry considers a copper grating beside a plasma and transmission of a radio frequency wave. Even though the copper used here in this simulation is very absorbing, there are ranges of frequencies when transmission or reflection are enhanced.

At the heart of the field of photonics is the control of the reflection and transmission of light. Plasmonics looks at this problem of control of electromagnetic radiation in the context of surface plasmon polaritons (SPP). SPPs are propagating electromagnetic modes localized at the interfaces between media with positive and negative permittivities. Their excitation can accompany the enhancement of transmission, reflection, or absorption of EM radiation. There are a number of ways to excite SPPs and this work looks at several geometries and analyzes the transmission and reflection characteristics using a numerical approach based on the finite element method.<p> The first method of excitation is by incident evanescent wave that was totally internally reflected from an earlier interface. It is shown that an evanescent wave can excite SPPs and create resonant transmisison. It is also found that high values of dissipation limit transmission and instead create resonant absorption. The second method involves the modulation of the negative permittivity of the plasma slab itself. Numerical results are compared to analytical ones and are in good agreement because harmonics of the solution above the first are negligible. An investigation of transmission through a plasma slab with a single thin diffraction grating placed nearby follows. Analytical and numerical calculations show that a single thin grating is sufficient to create transmission resonance. It is found that for large values of diffraction grating modulation parameter, higher harmonics, usually not accounted for in analytical solutions, results in discrepancies between analytical and numerical results. The next geometry considered is of a plasma layer with only part of it having modulated permittivity. The presence of modulation of only part of the plasma layer is shown to create transmission and reflection resonances. By tailoring parameters of the system, it is shown how the resonant frequencies can be shifted. The final geometry considers a copper grating beside a plasma and transmission of a radio frequency wave. Even though the copper used here in this simulation is very absorbing, there are ranges of frequencies when transmission or reflection are enhanced.

京都大学 / 0048 / 新制・論文博士 / 博士(工学) / 乙第13010号 / 論工博第4135号 / 新制||工||1649(附属図書館) / 32938 / 京都大学大学院工学研究科都市環境工学専攻 / (主査)教授 髙橋 大弐, 教授 鉾井 修一, 教授 竹脇 出 / 学位規則第4条第2項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM