Spelling suggestions: "subject:"responsesurface methodology"" "subject:"spoofsurface methodology""
11 |
Discrimination of Retained Solvent Levels in Printed Food-Packaging Using Electronic Nose SystemsVan Deventer, David 03 October 2001 (has links)
The expanding role of electronic nose instrumentation, as a quality-monitoring tool for food-packaging materials, is examined and reviewed. The food industry is interested in determining the applicability of using an electronic nose for odor analysis of retained printing solvent levels in packaging. Three electronic nose systems were optimized for this application and their performance assessed. These include the FOX 3000, the Cyranose 320, and the QMB6.
Response surface methodology was used to generate 2nd order models of sensor response as a function of system and experimental parameters for the three electronic nose systems. Forty-seven of 50 sensor models generated were found to be significant at an a-level of 0.05. Optimum settings, that allowed adequate signals to be obtained for the full range of examined retained solvents levels, were selected for the remaining work using these models.
Performance analyses of these systems, which use three leading sensor technologies, showed that the conducting polymer sensor technology demonstrated the most discriminatory power. All three technologies proved able to discriminate among different levels of retained solvents. Each complete electronic nose system was also able to discriminate between assorted packaging having either conforming or non-conforming levels of retained solvents. Each system correctly identified 100% of unknown samples. Sensor technology had a greater effect on performance than the number of sensors used. Based on discriminatory power and practical features, the FOX 3000 and the Cyranose 320 were superior. The results indicate that electronic nose instrumentation can be used as a complimentary discriminatory tool in quality control. / Master of Science
|
12 |
Development of molecular distillation based simulation and optimization of refined palm oil process based on response surface methodologyTehlah, N., Kaewpradit, P., Mujtaba, Iqbal M. 16 July 2017 (has links)
Yes / The deodorization of the refined palm oil process is simulated here using ASPEN HYSYS.
In the absence of a library molecular distillation (MD) process in ASPEN HYSYS, first, a single flash
vessel is considered to represent a falling film MD process which is simulated for a binary system
taken from the literature and the model predictions are compared with the published work based
on ASPEN PLUS and DISMOL. Second, the developed MD process is extended to simulate the
deodorization process. Parameter estimation technique is used to estimate the Antoine’s parameters
based on literature data to calculate the pure component vapor pressure. The model predictions
are then validated against the patented results of refining edible oil rich in natural carotenes and
vitamin E and simulation results were found to be in good agreement, within a 2% error of the
patented results. Third, Response Surface Methodology (RSM) is employed to develop non-linear
second-order polynomial equations based model for the deodorization process and the effects of
various operating parameters on the performance of the process are studied. Finally, an optimization
framework is developed to maximize the concentration of beta-carotene, tocopherol and free fatty
acid while optimizing the feed flow rate, temperature and pressure subject to process constrains.
The optimum results of feed flow rate, temperature, and pressure were determined as 1291 kg/h,
147 C and 0.0007 kPa respectively, and the concentration responses of beta- carotene, tocopherol and
free fatty acid were found to be 0.000575, 0.000937 and 0.999840 respectively. / Prince of Songkla University, Songkhla, Thailand for providing financial support (Grant code: PSU2554-022)
|
13 |
Design of a nanoplatform for treating pancreatic cancerManawadu, Harshi Chathurangi January 1900 (has links)
Doctor of Philosophy / Department of Chemistry / Stefan H. Bossmann / Pancreatic cancer is the fourth leading cause of cancer-related deaths in the USA. Asymptomatic early cancer stages and late diagnosis leads to very low survival rates of pancreatic cancers, compared to other cancers. Treatment options for advanced pancreatic cancer are limited to chemotherapy and/or radiation therapy, as surgical removal of the cancerous tissue becomes impossible at later stages. Therefore, there's a critical need for innovative and improved chemotherapeutic treatment of (late) pancreatic cancers. It is mandatory for successful treatment strategies to overcome the drug resistance associated with pancreatic cancers. Nanotechnology based drug formulations have been providing promising alternatives in cancer treatment due to their selective targeting and accumulation in tumor vasculature, which can be used for efficient delivery of chemotherapeutic agents to tumors and metastases. The research of my thesis is following the principle approach to high therapeutic efficacy that has been first described by Dr. Helmut Ringsdorf in 1975. However, I have extended the use of the Ringsdorf model from polymeric to nanoparticle-based drug carriers by exploring an iron / iron oxide nanoparticle based drug delivery system. A series of drug delivery systems have been synthesized by varying the total numbers and the ratio of the tumor homing peptide sequence CGKRK and the chemotherapeutic drug doxorubicin at the surfaces of Fe/Fe₃O₄-nanoparticles. The cytotoxicity of these nanoformulations was tested against murine pancreatic cancer cell lines (Pan02) to assess their therapeutic capabilities for effective treatments of pancreatic cancers. Healthy mouse fibroblast cells (STO) were also tested for comparison, because an effective chemotherapeutic drug has to be selective towards cancer cells. Optimal Experimental Design methodology was applied to identify the nanoformulation with the highest therapeutic activity. A statistical analysis method known as response surface methodology was carried out to evaluate the in-vitro cytotoxicity data, and to determine whether the chosen experimental parameters truly express the optimized conditions of the nanoparticle based drug delivery system. The overall goal was to optimize the therapeutic efficacy in nanoparticle-based pancreatic cancer treatment. Based on the statistical data, the most effective iron/iron oxide nanoparticle-based drug delivery system has been identified. Its Fe/Fe₃O₄ core has a diameter of 20 nm. The surface of this nanoparticle is loaded with the homing sequence CGKRK (139-142 peptide molecules per nanoparticle surface) and the chemotherapeutic agent doxorubicin (156-159 molecules per surface), This nanoplatform is a promising candidate for the nanoparticle-based chemotherapy of pancreatic cancer.
|
14 |
Modelling of physical vapour deposition (PVD) process on cutting tool using response surface methodology (RSM)Abd Rahman, M. N. January 2009 (has links)
The Physical Vapour Deposition (PVD) magnetron sputtering process is one of the widely used techniques for depositing thin film coatings on substrates for various applications such as integrated circuit fabrication, decorative coatings, and hard coatings for tooling. In the area of coatings on cutting tools, tool life can be improved drastically with the application of hard coatings. Application of coatings on cutting tools for various machining techniques, such as continuous and interrupted cutting, requires different coating characteristics, these being highly dependent on the process parameters under which they were formed. To efficiently optimise and customise the deposited coating characteristics, PVD process modelling using RSM methodology was proposed. The aim of this research is to develop a PVD magnetron sputtering process model which can predict the relationship between the process input parameters and resultant coating characteristics and performance. Response Surface Methodology (RSM) was used, this being one of the most practical and cost effective techniques to develop a process model. Even though RSM has been used for the optimisation of the sputtering process, published RSM modelling work on the application of hard coating process on cutting tool is lacking. This research investigated the deposition of TiAlN coatings onto tungsten carbide cutting tool inserts using PVD magnetron sputtering process. The input parameters evaluated were substrate temperature, substrate bias voltage, and sputtering power; the out put responses being coating hardness, coating roughness, and flank wear (coating performance). In addition to that, coating microstructures were investigated to explain the behaviour of the developed model. Coating microstructural phenomena assessed were; crystallite grain size, XRD peak intensity ratio I111/I200 and atomic number percentage ratio of Al/Ti. Design Expert 7.0.3 software was used for the RSM analysis. Three process models (hardness, roughness, performance) were successfully developed and validated. The modelling validation runs were within the 90% prediction interval of the developed models and their residual errors compared to the predicted values were less than 10%. The models were also qualitatively validated by justifying the behaviour of the output responses (hardness, roughness, and flank wear) and microstructures (Al/Ti ratio, crystallographic peak ratio I111/1200, and grain size) with respect to the variation of the input variables based on the published work by researchers and practitioners in this field. The significant parameters that influenced the coating hardness, roughness, and performance (flank wear) were also identified. Coating hardness was influenced by the substrate bias voltage, sputtering power, and substrate temperature; coating roughness was influenced by sputtering power and substrate bias; and coating performance was influenced by substrate bias. The analysis also discovered that there was a significant interaction between the substrate temperature and the sputtering power which significantly influenced coating hardness, roughness, and performance; this interaction phenomenon has not been reported in previously published literature. The correlation study between coating characteristics, microstructures and the coating performance (flank wear) suggested that the coating performance correlated most significantly to the coating hardness with Pearson coefficient of determination value (R2) of 0.7311. The study also suggested some correlation between coating performance with atomic percentage ratio of Al/Ti and grain size with R2 value of 0.4762 and 0.4109 respectively.
|
15 |
Granulats à base de boues de phosphates : transformations thermiques, propriétés physiques et application / Aggregates based phosphate sludge : thermal transformations, physical properties, and applicationLoutou, Mohamed 21 November 2015 (has links)
Des agrégats à base des boues de phosphate de la zone de Gantour ( Youssoufia,Maroc) sont cuits à des températures comprises entre 900 et 1200°C, et examinés par différentes techniques (DRX, MEB, analyses thermique et dilatométrique, et spectroscopie d’impédance). Les propriétés physiques des agrégats (retrait, absorption d’eau et résistance à la compression) sont mesurées et corrélées, dans certains cas, aux facteurs expérimentaux(température, temps de cuisson, teneur de l’additif), et ce en utilisant la méthodologie de la recherche expérimentale.Les agrégats amendés à l’argile smectitique sont le siège de formation de la gehlénite. Dans ce cas, la fluorapatite a partiellement résisté au traitement thermique, et a été le siège d’une ségrégation localisée. Les mesures d'impédance ont bien mis en évidence l'étape principale du frittage, lequel s’est produit par écoulement de la masse fondue. En se basant sur les valeurs de la densité, les granulats cuits à 900 et à 1100°C pouvaient bien être considérés comme des agrégats légers.Les études menées sur les agrégats des mélanges : argile kaolinitique-boue, cendre boue,et argile kaolinitique-cendre-boue ont montré la présence de la labradorite, et d’une masse fondue, qui semblait se former, entre autres, de la fusion de la fluorapatite. Par ailleurs,l'utilisation de la méthodologie de la recherche expérimentale a permis d'évaluer le poids des effets des facteurs expérimentaux sur les propriétés physiques des agrégats. Des granulats légers (1,02 < densité < 2,1 g/cm3) et résistants sont préparés avec succès dans les conditions expérimentales adoptées. Les granulats ayant le meilleur rapport résistance / densité sont ceux du mélange ternaire.Concernant le volet application, les résultats ont montré que l’utilisation des agrégats en construction est possible et que l’association d’agrégats légers au sol a permis d’activer la croissance des plants de la luzerne. D’un autre côté, l'absorption du phosphore par les racines(1,45 mg/g maximum) des plantes était meilleure dans le cas du mélange contenant de l’argile. / Phosphate sludge generated from beneficiation plants of Moroccan phosphate rocks was investigated at the range [900-1200°C] by X-ray diffraction, scanning electron microscopy, thermal analysis dilatometric analysis and impedance spectroscopy. Mixtures of the phosphates ludge and amendments such as a swelling clay (up to 30 wt.% of the clay), a kaolinitic clay (up to 40 wt.% of the sludge) and a fly ash (65.5 wt.% of the ash) were investigated and their properties (shrinkage, density, water absorption and compressive strength) were measured as a function of temperature and clay addition. The results showed that gehlénite neoformed from lime of decomposed carbonates and breakdown products of clay minerals in the first mixture while labradorite/anorthite was the only neoformed phase in the other blends. Also fluoroapatite (original mineral) resisted heating until fusion in almost samples. A new approach based on the methodology of the experimental design was adopted to assess the effect of the processing factors on the studied properties. The measured properties were mainly controlled by temperature, and the effect of clay addition was less regular. Considering the mixtures densities lightweight agglomerates can be produced at specific conditions. On the other hand, the release ability of phosphorus by LWAs in the presence ofalfalfa plants has been performed. It was found that due to the release of phosphorus by soil embedded pellets the growth of alfalfa plants improved. The sintering process of blends of phosphate sludge and a naturally occurring clay material (0-30 wt.%) was investigated in the range 650-1100°C by using impedance spectroscopy. The results showed that the sintering process was effective between 750 and 1000°C and occurred by melt flow.
|
16 |
Aplicação de técnicas fatoriais de planejamento no desenvolvimento de um modelo de avaliação da oxidação em óleos e emulsões / Application of factorial design techniques on the development of an assessment model of the oxidation in bulk oils and emulsionsBranco, Gabriel Favalli 19 August 2011 (has links)
A estabilidade oxidativa em óleos e emulsões é influenciada pela ação simultânea de diversos fatores. Entretanto, a avaliação do efeito antioxidante de novos compostos tem sido conduzida utilizando-se valores fixos para esses fatores. Portanto, o objetivo deste estudo foi aplicar técnicas fatoriais para desenvolver modelos de oxidação lipídica nos quais os principais fatores pudessem variar simultaneamente. A oxidação de óleo de linhaça removido de seus componentes minoritários, determinada pela concentração de hidroperóxidos e malonaldeído (TBARS), foi avaliada em função da variação conjunta da temperatura (40 - 60 oC), concentração de ferro (0,0 - 1,0 mmol/L FeSO47H2O) e de ascorbil palmitato (0,0 - 1,5 mmol/L). Os maiores valores observados para os marcadores foram obtidos a 40oC, sendo altamente dependentes da relação \"ferro / ascorbil palmitato\". Adicionando-se 1,4707 mmol/L de ferro e 1,5839 mmol/L de ascorbil palmitato, a amplitude de formação de hidroperóxidos aumentou em 57%. Uma emulsão foi preparada com 1% do mesmo óleo de linhaça removido de seus componentes minoritários, utilizando-se um emulsificante aniônico sob alta pressão. A variação da temperatura, pH e concentração de ferro, cobre, ácido ascórbico, ascorbil palmitato e cloreto de sódio nos marcadores químicos da oxidação (hidroperóxidos e TBARS) foi avaliada através de um planejamento fracionário do tipo Plackett-Burman para seleção de variáveis. A seguir, o efeito das concentrações de ferro (0,0 - 1,0 mmol/L FeSO47H2O), ácido ascórbico (0,0 - 2,0 mmol/L) e pH (3,0 - 7,0) na estabilidade oxidativa das emulsões foi avaliado utilizando-se um Delineamento Composto Central. Os maiores valores dos marcadores foram obtidos adicionando-se 0,885 mmol/L de ferro e 1,700 mmol/L de ácido ascórbico à emulsão mantida a 30ºC sob pH 5,51. A atividade antioxidante de seis compostos foi avaliada em ambos os modelos (óleo puro e emulsão), sendo que uma melhor discriminação entre as amostras foi observada nos sistemas otimizados. A utilização de técnicas fatoriais mostrou-se eficiente na avaliação conjunta de vários fatores que influenciam a estabilidade oxidativa de óleos e emulsões, e proporcionou um melhor poder de discriminação na atividade antioxidante de compostos naturais e artificiais. / The oxidative stability in bulk oils and emulsions is affected by many factors. However, assessment of the antioxidant effect of new compounds has been carried out under fixed conditions. Thus, the objective of this study was to apply factorial techniques to develop lipid oxidation models in which the main factors vary simultaneously. Oxidation of flaxseed oil stripped of its minor components determined by the concentration of hydroperoxides and malonaldehyde (TBARS) was evaluated according to the combined variation of temperature (40 - 60 oC), iron concentration (0,0 - 1,0 mmol/L FeSO47H2O) and ascorbyl palmitate concentration (0,0 - 1,5 mmol/L). The highest observed values to these markers were obtained at 40oC, being greatly dependent on the \"iron / ascorbyl palmitate\" ratio. Addition of 1,4707 mmol/L of iron and 1,5839 mmol/L of ascorbyl palmitate increased the hydroperoxide formation by 57%. An emulsion was prepared with 1% of the same stripped flaxseed oil and an anionic emulsifier under high pressure. The variation of temperature, pH and iron, copper, ascorbic acid, ascorbyl palmitate and sodium chloride concentration on the chemical markers of oxidation (hydroperoxides and TBARS) was evaluated using a Plackett-Burman design to screen the variables. Following, the effect of iron concentration (0,0 - 1,0 mmol/L FeSO47H2O), ascorbyl palmitate concentration (0,0 - 2,0 mmol/L) and pH (3.0 - 7,0) on the oxidative stability of the emulsion was evaluated using a Central Composite Design. The highest observed values to these markers were obtained adding 0,885 mmol/L of iron and 1,700 mmol/L of ascorbic acid to the emulsion under 30ºC and pH 5,51. The antioxidant activity of six compounds was evaluated using both models (bulk oil and emulsion), in which a better discrimination was observed for the samples in the optimized systems. The application of factorial techniques was efficient on the joint assessment of several factors that affect the oxidative stability of oils and emulsions, and provided a better discrimination power on the antioxidant activity of natural and artificial compounds.
|
17 |
Utilização de diferentes substratos para a produção de etanol, levana e sorbitol por Zymomonas mobilisErnandes, Fernanda Maria Pagane Guereschi [UNESP] 03 July 2009 (has links) (PDF)
Made available in DSpace on 2014-06-11T19:31:03Z (GMT). No. of bitstreams: 0
Previous issue date: 2009-07-03Bitstream added on 2014-06-13T20:21:44Z : No. of bitstreams: 1
ernandes_fmpg_dr_sjrp.pdf: 1963066 bytes, checksum: 42dcae2ecfe9dfb358788c6490a13653 (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / O principal produto da fermentação de açúcares por Zymomonas mobilis é o etanol quando glicose e frutose são utilizadas como fontes de carbono. Entretanto, quando sacarose é empregada na fermentação, o rendimento do etanol diminui devido à formação de subprodutos como levana, sorbitol, acetaldeído, ácido acético, pequenas quantidades de alguns álcoois superiores e fenol. A utilização de produtos agroindustriais, como o caldo e melaço de cana-deaçúcar, é uma alternativa para reduzir o custo final dos produtos de fermentação devido à disponibilidade de aquisição e composição química desses substratos. Este trabalho teve como objetivo utilizar substratos alternativos e otimizar as condições de fermentação para a produção de etanol, levana e sorbitol por Zymomonas mobilis CCT 4494. Também foi considerado o efeito da variação do substrato e de sais minerais adicionados nos meios de produção (sintético, caldo e melaços de cana-de-açúcar). Para a obtenção dos produtos de fermentação, foi aplicada a metodologia de superfície de resposta, seguindo um planejamento fatorial do tipo 27-2, de acordo com o modelo proposto por Box e Hunter, onde as variáveis independentes estudadas foram: pH inicial do meio de cultivo, temperatura de incubação, concentração do substrato e efeito da adição de KCl, K2SO4, MgSO4, CaCl2. Durante a realização das fermentações foi observado que a bactéria Zymomonas mobilis CCT 4494 se adaptou nos meios de fermentação contendo altas concentrações de sacarose e suportou a variação do pH e da temperatura de fermentação. O aumento da concentração da fonte de carbono favoreceu a formação dos produtos levana e etanol, entretanto, não houve produção de sorbitol. O meio sintético proporcionou maior rendimento de levana e etanol, enquanto que, os meios alternativos caldo e melaços de cana-de-açúcar... / The main product from fermentation of sugars by Zymomonas mobilis is ethanol when glucose and fructose are used as carbon sources. However, when sucrose is used in the fermentation medium, ethanol yield decreases due to the formation of by-products such as levan, sorbitol, acetaldehyde, acetic acid, small amounts of some superior alcohols and phenol. The use of agro industrial by products, such as sugarcane juice and molasses, is an alternative to reduce the final cost of fermentation products due to the constant availability and to the chemical composition of these by substrates. This study had the aim of using alternative substrates and of optimizing fermentation conditions for the production of ethanol, levan and sorbitol by Zymomonas mobilis CCT 4494. The effect of variation of substrate and mineral salts added to the production media (synthetic, sugarcane juice and molasses) was also considered. To obtain the fermentation products, response surface methodology was employed, following a 27-2 factorial planning, according to the model proposed by Box and Hunter, where the independent variables studied were: initial medium pH, incubation temperature, substrate concentration and effect of the addition of KCl, K2SO4, MgSO4, CaCl2. During the fermentations, it was noted that the bacteria Zymomonas mobilis CCT 4494 well adapted in the media containing high concentrations of sucrose and tolerated pH and temperature variations. The increase of carbon source concentration favored the formation of levan and ethanol, however, there was no sorbitol production. The synthetic medium offered higher levan and ethanol yield, whereas alternative media sugarcane juice and molasses, favored cellular growth. Among the independent variables analyzed with the best medium (synthetic) for biosynthesis of the biopolymer and ethanol, the ones that significantly (p<0.05) affected were KCl, K2SO4, CaCl2... (Complete abstract click electronic access below)
|
18 |
Aplicação de técnicas fatoriais de planejamento no desenvolvimento de um modelo de avaliação da oxidação em óleos e emulsões / Application of factorial design techniques on the development of an assessment model of the oxidation in bulk oils and emulsionsGabriel Favalli Branco 19 August 2011 (has links)
A estabilidade oxidativa em óleos e emulsões é influenciada pela ação simultânea de diversos fatores. Entretanto, a avaliação do efeito antioxidante de novos compostos tem sido conduzida utilizando-se valores fixos para esses fatores. Portanto, o objetivo deste estudo foi aplicar técnicas fatoriais para desenvolver modelos de oxidação lipídica nos quais os principais fatores pudessem variar simultaneamente. A oxidação de óleo de linhaça removido de seus componentes minoritários, determinada pela concentração de hidroperóxidos e malonaldeído (TBARS), foi avaliada em função da variação conjunta da temperatura (40 - 60 oC), concentração de ferro (0,0 - 1,0 mmol/L FeSO47H2O) e de ascorbil palmitato (0,0 - 1,5 mmol/L). Os maiores valores observados para os marcadores foram obtidos a 40oC, sendo altamente dependentes da relação \"ferro / ascorbil palmitato\". Adicionando-se 1,4707 mmol/L de ferro e 1,5839 mmol/L de ascorbil palmitato, a amplitude de formação de hidroperóxidos aumentou em 57%. Uma emulsão foi preparada com 1% do mesmo óleo de linhaça removido de seus componentes minoritários, utilizando-se um emulsificante aniônico sob alta pressão. A variação da temperatura, pH e concentração de ferro, cobre, ácido ascórbico, ascorbil palmitato e cloreto de sódio nos marcadores químicos da oxidação (hidroperóxidos e TBARS) foi avaliada através de um planejamento fracionário do tipo Plackett-Burman para seleção de variáveis. A seguir, o efeito das concentrações de ferro (0,0 - 1,0 mmol/L FeSO47H2O), ácido ascórbico (0,0 - 2,0 mmol/L) e pH (3,0 - 7,0) na estabilidade oxidativa das emulsões foi avaliado utilizando-se um Delineamento Composto Central. Os maiores valores dos marcadores foram obtidos adicionando-se 0,885 mmol/L de ferro e 1,700 mmol/L de ácido ascórbico à emulsão mantida a 30ºC sob pH 5,51. A atividade antioxidante de seis compostos foi avaliada em ambos os modelos (óleo puro e emulsão), sendo que uma melhor discriminação entre as amostras foi observada nos sistemas otimizados. A utilização de técnicas fatoriais mostrou-se eficiente na avaliação conjunta de vários fatores que influenciam a estabilidade oxidativa de óleos e emulsões, e proporcionou um melhor poder de discriminação na atividade antioxidante de compostos naturais e artificiais. / The oxidative stability in bulk oils and emulsions is affected by many factors. However, assessment of the antioxidant effect of new compounds has been carried out under fixed conditions. Thus, the objective of this study was to apply factorial techniques to develop lipid oxidation models in which the main factors vary simultaneously. Oxidation of flaxseed oil stripped of its minor components determined by the concentration of hydroperoxides and malonaldehyde (TBARS) was evaluated according to the combined variation of temperature (40 - 60 oC), iron concentration (0,0 - 1,0 mmol/L FeSO47H2O) and ascorbyl palmitate concentration (0,0 - 1,5 mmol/L). The highest observed values to these markers were obtained at 40oC, being greatly dependent on the \"iron / ascorbyl palmitate\" ratio. Addition of 1,4707 mmol/L of iron and 1,5839 mmol/L of ascorbyl palmitate increased the hydroperoxide formation by 57%. An emulsion was prepared with 1% of the same stripped flaxseed oil and an anionic emulsifier under high pressure. The variation of temperature, pH and iron, copper, ascorbic acid, ascorbyl palmitate and sodium chloride concentration on the chemical markers of oxidation (hydroperoxides and TBARS) was evaluated using a Plackett-Burman design to screen the variables. Following, the effect of iron concentration (0,0 - 1,0 mmol/L FeSO47H2O), ascorbyl palmitate concentration (0,0 - 2,0 mmol/L) and pH (3.0 - 7,0) on the oxidative stability of the emulsion was evaluated using a Central Composite Design. The highest observed values to these markers were obtained adding 0,885 mmol/L of iron and 1,700 mmol/L of ascorbic acid to the emulsion under 30ºC and pH 5,51. The antioxidant activity of six compounds was evaluated using both models (bulk oil and emulsion), in which a better discrimination was observed for the samples in the optimized systems. The application of factorial techniques was efficient on the joint assessment of several factors that affect the oxidative stability of oils and emulsions, and provided a better discrimination power on the antioxidant activity of natural and artificial compounds.
|
19 |
Modelovanje i optimizacija procesa mikrofiltracije suspenzija pšeničnog skroba / Modeling and optimization of wheat starch suspensions microfiltrationIkonić Bojana 29 July 2011 (has links)
<p>Cilj ovog rada je ispitivanje uticaja procesnih<br />parametara (transmembranski pritisak, protok i<br />koncentracija suspenzije) na vrednost fluksa<br />permeata, sa i bez prisustva statičkog mešača,<br />tokom procesa mikrofiltracije suspenzija<br />pšeničnog skroba na keramičkim membranama<br />različitih veličina pora (200 nm i 500 nm).<br />Mikrofiltracija je izvođena u uslovima<br />recirkulacije i koncentrisanja napojne suspenzije.<br />Za modelovanje zavisnosti procesa mikrofiltracije<br />suspenzija skroba od procesnih parametara<br />primenjen je postupak odzivne površine.<br />Ispitivanjem mikrofiltracije suspenzija pšeničnog<br />skroba na membranama sa različitim srednjim<br />prečnikom pora (200 i 500 nm) uočeno je da sa<br />povećanjem veličine pora vrednost fluksa<br />permeata opada.<br />U posmatranom eksperimentalnom opsegu<br />procesnih parametara postignuto je relativno<br />povećanje stacionarnog fluksa od 25% do 50% u<br />uslovima recirkulacije napojne suspenzije, dok je<br />u uslovima koncentrisanja napojne suspenzije<br />relativno povećanje srednjeg fluksa iznosilo od<br />20% do 80%. Porast fluksa do kojeg dolazi<br />postavljanjem statičkog mešača u kanal membrane</p><p>uslovljen je uspostavljanjem turbulentnih uslova<br />proticanja i karakterističnog kretanja fluida duž<br />kanala membrane, koja je posledica<br />karakterističnog povezivanja helikoidnih<br />elemenata Kenics statičkog mešača.<br />Kako u uslovima recirkulacije napojne smeše,<br />tako i u uslovima koncentrisanja, vrednost<br />relativne specifične potrošnje energije zavisi skoro<br />isključivo od vrednosti protoka napojne smeše. Sa<br />povećanjem protoka specifična potrošnja energije<br />u prisustvu statičkog mešača naglo raste i<br />relativno povećanje protoka nije dovoljno da bi<br />kompenzovalo gubitak hidrauličke snage. U<br />opsegu protoka od 80 do 100 L/h su obezbeđene<br />pozitivne vrednosti relativne promene specifične<br />potrošnje energije, te je upotreba statičkog mešača<br />opravdana sa ekonomskog aspekta.<br />Optimizacija eksperimentalnih uslova urađena je<br />postupkom istovremene maksimizacije fluksa<br />permeata u sistemima sa statičkim mešačem i<br />relativne promene specifične potrošnje energije.<br />Optimalni uslovi izvođenja procesa mikrofiltracije<br />suspenzija pšeničnog skroba u uslovima<br />recirkulacije napojne suspenzije ukazuju da je<br />proces potrebno izvoditi pri maksimalnoj<br />vrednosti transmembranskog pritiska od 0,9 bara,<br />protocima od 85 do 100 L/h i koncentraciji od 5<br />do 6 g/L.<br />Optimalni uslovi izvođenja procesa mikrofiltracije<br />suspenzija pšeničnog skroba u uslovima<br />koncentrisanja napojne suspenzije ukazuju da je<br />proces potrebno izvoditi pri vrednosti<br />transmembranskog pritiska od 0,85 do 0,9 bara,<br />protocima od 85 do 100 L/h i koncentraciji od 5<br />do 7 g/L.<br />Pored ispitivanja na laboratorijskoj<br />aparaturi, cilj ovog rada je bio i ispitivanje uticaja<br />procesnih parametara na proces mikrofiltracije<br />suspenzija skroba u poluindustrijskim uslovima<br />(na jednokanalnoj i višekanalnoj membrani<br />srednjeg prečnika pora 200 nm), odnosno šireg<br />opseg vrednosti transmembranskog pritiska i<br />protoka suspenzije na pomenute odzive u<br />uslovima koncentrisanja napojne suspenzije.</p> / <p> The aim of this study was to investigate the effect of<br /> process parameters (transmembrane pressure, flow<br /> rate and suspension concentration) on the permeate<br /> flux in the system with and without the presence of<br /> static mixer. Microfiltration of wheat starch<br /> suspensions was performed in recirculation and<br /> concentration mode using ceramic membranes with<br /> different pore size (200 nm and 500 nm). Response<br /> surface methodology was applied for modeling<br /> cross-flow microfiltration of starch suspensions.<br /> During investigation of starch suspension<br /> microfiltration process on membranes with different<br /> pore size diameter (200 and 500 nm) it was<br /> observed that with increasing pore size the permeate<br /> flux declined.<br /> In the experimental range of process parameters,<br /> flux increase had values between 25% and 50% in<br /> recirculation mode, while in concentration mode<br /> this improvement was in range between 20% and 80%. The increase in flux that occurs by placing a</p> <p> static mixer in the membrane channel was caused<br /> by the establishment of turbulent flow conditions<br /> and the characteristic flow of fluid along the<br /> membrane channel, which is a consequence of the<br /> characteristic geometry of Kenics static mixer.<br /> Both in recirculation and concentration mode, the<br /> reduction of specific energy consumption depends<br /> almost exclusively on the value of the suspension<br /> flow rate. Specific energy consumption increased<br /> rapidly with increasing flow rate in the presence of<br /> static mixers and flux improvement is not high<br /> enough to compensate the loss of hydraulic<br /> dissipated power. The flow rate in the range from<br /> 80 to 100 L/h provided positive values of the<br /> reduction of specific energy consumption and the<br /> use of static mixers was justified from the<br /> economical point of view.<br /> Optimization of experimental conditions was done<br /> by a procedure of simultaneous maximization of<br /> permeate flux in systems with static mixers and<br /> reduction of specific energy consumption. Optimal<br /> conditions of the wheat starch suspension<br /> microfiltration in recirculation mode indicate that<br /> the process should be conducted at the maximum<br /> value of transmembrane pressure of 0.9 bar, flow<br /> rates from 85 to 100 L/h and concentration of 5 to 6<br /> g/L.<br /> Optimal conditions of the wheat starch suspension<br /> microfiltration in concentration mode indicate that<br /> the process should be conducted when the value of<br /> transmembrane pressure from 0.85 to 0.9 bar, flow<br /> rates from 85 to 100 L/h and concentration of 5 to 7<br /> g/L.<br /> Apart from investigations in laboratory conditions,<br /> the aim of this study was to examine the influence<br /> of process parameters on the starch suspensions<br /> microfiltration in the pilot plant (one channel and<br /> multichannel membrane with pore diameter 200<br /> nm) and wider range of transmembrane pressure<br /> and suspension flow rate on the mentioned<br /> responses in concentration mode.</p>
|
20 |
Robust design using sequential computer experimentsGupta, Abhishek 30 September 2004 (has links)
Modern engineering design tends to use computer simulations such as Finite Element Analysis (FEA) to replace physical experiments when evaluating a quality response, e.g., the stress level in a phone packaging process. The use of computer models has certain advantages over running physical experiments, such as being cost effective, easy to try out different design alternatives, and having greater impact on product design. However, due to the complexity of FEA codes, it could be computationally expensive to calculate the quality response function over a large number of combinations of design and environmental factors. Traditional experimental design and response surface methodology, which were developed for physical experiments with the presence of random errors, are not very effective in dealing with deterministic FEA simulation outputs. In this thesis, we will utilize a spatial statistical method (i.e., Kriging model) for analyzing deterministic computer simulation-based experiments. Subsequently, we will devise a sequential strategy, which allows us to explore the whole response surface in an efficient way. The overall number of computer experiments will be remarkably reduced compared with the traditional response surface methodology. The proposed methodology is illustrated using an electronic packaging example.
|
Page generated in 0.0717 seconds