Spelling suggestions: "subject:"detention curve"" "subject:"detention kurve""
41 |
Natural hydrate-bearing sediments: Physical properties and characterization techniquesDai, Sheng 27 August 2014 (has links)
An extensive amount of natural gas trapped in the subsurface is found as methane hydrate. A fundamental understanding of natural hydrate-bearing sediments is required to engineer production strategies and to assess the risks hydrates pose to global climate change and large-scale seafloor destabilization. This thesis reports fundamental studies on hydrate nucleation, morphology and the evolution of unsaturation during dissociation, followed by additional studies on sampling and pressure core testing.
Hydrate nucleation is favored on mineral surfaces and it is often triggered by mechanical vibration. Continued hydrate crystal growth within sediments is governed by capillary and skeletal forces; hence, the characteristic particle size d10 and the sediment burial depth determine hydrate morphologies in natural sediments. In aged hydrate-bearing sand, Ostwald ripening leads to patchy hydrate formation; the stiffness approaches to the lower bound at low hydrate saturation and the upper bound at high hydrate saturation. Hydrate saturation and pore habit alter the pore size variability and interconnectivity, and change the water retention curve in hydrate-bearing sediments.
The physical properties of hydrate-bearing sediments are determined by the state of stress, porosity, and hydrate saturation. Furthermore, hydrate stability requires sampling, handling, and testing under in situ pressure, temperature, and stress conditions. Therefore, the laboratory characterization of natural hydrate-bearing sediments faces inherent sampling disturbances caused by changes in stress and strain as well as transient pressure and temperature changes that affect hydrate stability. While pressure core technology offers unprecedented opportunities for the study of hydrate-bearing sediments, careful data interpretation must recognize its inherent limitations.
|
42 |
Experimental Study on the Engineering Properties of GelfillAbdul-Hussain, Najlaa 29 March 2011 (has links)
Gelfill (GF) is made of tailings, water, binder and chemical additives (Fillset, sodium silicate gel). The components of GF are combined and mixed on the surface and transported (by gravity and/or pumping) to the underground mine workings, where the GF can be used for both underground mine support and tailings storage.
Thermal (T), hydraulic (H), and mechanical (M) properties are important performance criteria of GF. The understanding of these engineering properties and their evolution with time are still limited due to the fact that GF is a new cemented backfill material.
In this thesis, the evolution of the thermal, hydraulic, mechanical, and microstructural properties of small GF samples are determined. Various binder contents of Portland cement type I (PCI) are used. The GF is cured for 3, 7, 28, 90, and 120 days. It is found that the thermal, hydraulic and mechanical properties are time-dependent or affected by the degree of binder hydration index. Furthermore, a relationship is found between the compressive strength and the saturated hydraulic conductivity of the GF samples.
The unsaturated hydraulic properties of GF samples have also been investigated. The outcomes show that unsaturated hydraulic conductivity is influenced by the degree of binder hydration index and binder content, especially at low suction ranges. Simple functions are proposed to predict the evolution of air-entry values (AEVs), residual water content, and fitting parameters from the van Genuchten model with the degree of hydration index (α). Furthermore, two columns are built to simulate the coupled thermo-hydro-mechanical (THM) behaviour of GF under drained and undrained conditions. The obtained results from the GF columns are compared with the small samples. It is observed that the mechanical properties, hydraulic properties (suction and water content), and temperature development are strongly coupled. The magnitude of these THM coupling factors is affected by the size of the GF. The findings also show that the mechanical, hydraulic and thermal properties of the GF columns are different from samples cured in plastic moulds.
|
43 |
Estudo Experimental da Camada de Cobertura do Aterro Morro do Céu, Niterói - RJ. / Experimental Study of Landfill Morro do Céu, Niterói - RJ, Cover Layer.Taísa Ferreira Lopes dos Santos 26 March 2009 (has links)
Este trabalho apresenta uma revisão bibliográfica sobre os conceitos de solos não saturados e
descreve os diversos tipos de camada de cobertura usadas em aterro de resíduos sólidos urbanos.
Apresenta trabalhos científicos que contemplam curvas características de solos tropicais
brasileiros. Caracteriza o solo usado antigamente como camada de cobertura do Aterro Morro do
Céu e este solo com adição de 5% de bentonita. Determina a curva característica desses dois
solos pelo Método do Papel Filtro e pela Placa de Sucção e, em seguida, Placa de Pressão. As
curvas obtidas por esses métodos apresentaram diferenças. A adição da bentonita no solo teve
como objetivo avaliar o desempenho do mesmo. O solo com adição de bentonita apresentou
maior plasticidade, menor permeabilidade e maior capacidade de retenção de água no solo.
Apresenta a modelagem de camadas monolíticas, camadas monolíticas evapotranspirativas,
barreiras capilares, barreiras capilares evapotranspirativas através do uso do Programa
VADOSE/W como ferramenta para aferição. / This study is a review about unsatured soils concepts and describes some types of soil cover
systems used in landfills. It presents scientific works about Brazilian tropical soils Water
Retention Curve. It characterizes the soil that was used as a cover layer system used at Morro do
Céu landfill and the same soil with addition of 5% of bentonite. It determinates the soil water
retention curve by Filter Paper Method and Suction Plate and, after that, Pressure Plate. The
curves obtained by these two methods showed differences. The objective of the addition of the
bentonite in the soil is to evaluate its performance. The soil with the addition of bentonite shows
higher plasticity, lower hydraulic conductivity and higher moisture storage. It presents the
modeling of monolithic covers, evapotranspirative monolithic covers, capillary barriers and
evapotranspirative capillary barriers by the use of VADOSE/W Program as a tool for gauging.
|
44 |
Monitoramento e modelagem da recarga freática em técnica de drenagem compensatória / Monitoring and modeling of groundwater recharge using a compensatory drainage techniqueSírio, Daniel de Lima Nascimento 23 August 2013 (has links)
Made available in DSpace on 2016-06-02T20:00:55Z (GMT). No. of bitstreams: 1
5728.pdf: 4886967 bytes, checksum: 9a66021bc6eec94037ca58204cb8fb84 (MD5)
Previous issue date: 2013-08-23 / Financiadora de Estudos e Projetos / Stormwater flooding in urban centers today is the direct result of ground impermeabilization and the ineffective dimensioning of stormwater drainage systems. In order to control these events, innovative low impact stormwater drainage facilities are used in Brazil, which are efficient in controlling sharp peak flows in urban watersheds without, however, affecting the aesthetic appearance of the landscape in these environments. The purpose of this study is to model and estimate the volume of water infiltrated into the soil where a compensatory stormwater drainage system is inserted, which can contribute to groundwater recharge. Modeling was performed by means of a physical storage method and storage variation in soil using a tensiometer, and in digital form using the Hydrus 2D/3D software package. The monitored drainage system and the digitally designed system consist of a water retention basin, a ditch or filter, and an infiltration trench. Groundwater recharge was estimated based on soil analyses, geophysical investigations, flow measurements, and rainfall data, in addition to data collected during 454 days of continuous monitoring of the system by means of tensiometers installed on-site, rain gauges, and the construction of bimodal soil water retention curves using the filter paper method. The moisture content at different depths, the zero water flow plane, and the volumes moving in the soil matrix were calculated based on the identification of the soil water content and matric potential, the hydraulic conductivity in saturated conditions at the monitored depths, and the soil s characteristic curves. The results of the Soil Water Retention Curves (SWRC) and soil moisture content were negligible starting from a depth of 80cm. However, the groundwater recharge rate estimated by the tensiometer method and by the Hydrus digital model was about 45% of the total volume of rainfall. / Atualmente, eventuais problemas de enchentes e inundações, são causas diretas da impermeabilização de áreas nos centros urbanos e do ineficaz dimensionamento da drenagem pluvial nas cidades. No intuito de se controlar estes eventos, equipamentos de drenagem de baixo impacto são inovadoras no Brasil e eficientes no controle de vazões de pico acentuadas em bacias urbanas, sem sobretudo, renunciar à estética e à paisagem nestes ambientes. Neste trabalho objetivou-se modelar e estimar o volume de água infiltrado no solo, onde um sistema de drenagem pluvial compensatória está inserido, que é capaz de contribuir com a recarga freática. A modelagem foi realizada por meio do método de armazenamento e variação da armazenagem no solo com utilização de tensiômetro e de forma digital utilizando-se do software Hydrus 2D/3D. O sistema de drenagem monitorado e o diagramado digitalmente são constituídos de uma bacia de retenção de água, uma vala ou filtro gramado e uma trincheira de infiltração. Na tentativa de estimar a recarga freática realizaram-se, conjuntamente, análises de solo, investigações geofísicas, medidas de vazão, coleta de dados de chuva, além do monitoramento contínuo em 454 dias do sistema através da instalação de tensiômetros no local, pluviógrafos, além da construção de curvas bimodais de retenção de água nos solos por meio do método do papel filtro. A partir da identificação dos potenciais mátricos do solo, da condutividade hidráulica em condições saturadas para as profundidades monitoradas e da obtenção das curvas características do solo, foi possível calcular o teor de umidade em diferentes profundidades, identificar o plano de fluxo zero e calcular os volumes em movimento na matriz do solo. Os resultados obtidos pela verificação das Curvas de Retenção de Água no Solo (CRAs) e umidades de campo foram pouco expressivos a partir de 80cm de profundidade, entretanto, a recarga estimada obtida pelo método dos tensiômetros e pelo modelo digital Hydrus ficou em torno de um valor médio de 45% do volume total precipitado.
|
45 |
COMPORTAMENTO FÍSICO DE UM LATOSSOLO SOB INTEGRAÇÃO LAVOURA - PECUÁRIA / PHYSICAL BEHAVIOR OF A OXOSOL UNDER CROP-LIVESTOCK INTREGATIONKunz, Marcelo 20 March 2009 (has links)
Soil compaction under traffic of animals has become an increasingly significant problem in soils used
for crop-livestock integration. The objective of this study was to determine the effect of integration
crop-livestock and different soil management systems on their attributes water and mechanical and
relate them to the development and productivity of soybean. The specific objectives were: to
investigate the effect of the absence of animal trampling on the water and mechanical attributes of soil
and growth of soybean; to evaluate susceptibility to soil compaction by the parameters of the compressibility of the soil; determine the relationship of permeability to air with the tension of the water and soil pore space; evaluate the relationship between plant growth and water content; evaluate the residual effect of chiseling. The experiment was installed in 2007, in a commercial agricultural area in the municipality of Ibirubá (RS). The soil of the place is classified as Oxisol. Bulk density (Ds), macroporosity (Ma), microporosity (Mi) total porosity (Pt) resistance to penetration (RP) and soil
moisture (θ), emergence and plant height, root growth and yield of soybean were evaluated. The experimental design was randomized blocks with three replications. The treatments were: tillage without grazing (SDS / P), tillage with grazing (SDC / P) and chiseling (Esc). The Ds, Mi, Ma, En, CRA and Ka were determined in soil samples collected with the structure preserved in layers: 0-0,07; 0,07- 0,15 e 0,20-0,30 m in three periods: before grazing (August 2007), post-grazing (December 2007) and
post-grazing (October 2008). The soil compression curve in balanced sample was determined in tension of 0.03 MPa in the first two layers above. The results indicated that the chiseling sporadic in soils under crop-livestock integration without tillage provides soil hydro-physical conditions less favorable for the development of plants. The preparation with chisel negatively affected grain yield of soybean. The soil whit chiseling had its proprieties changed by the treading of animals, reducing the residual effect of it. The absence of animals did not promote significant changes in Ds, Mi, Ma and Pt managed under the soil tillage. The chiseling decreased soil moisture compared to other treatments. The PR showed a direct relationship with soil moisture, for below 20% obtained values above 2 MPa for RP were. In SD/CP, the root system showed deviation of growth in depth, especially in the 0-0,07 m layer. The deviation unobserved in SD/SP and Esc. The same behavior was not observed in SD/SP and Esc. in years with water deficit. The plant height in SD/SP was higher than in other treatments
and the lowest grain yield was obtained in Esc. Highest Ka was observed in lower potential matric and the surface layer of soil, where there is greater presence of macroporosity, with reduction in depth. A direct relationship between the soil Ka and εa was observed. The pressure applied by the traffic of animals increased the values of σp in the surface layer. With chiseling of the soil, the surface layer had less ability to support loads and greater susceptibility to compaction. / A compactação do solo sob tráfego de animais vem se tornando um problema crescente em solos utilizados sob integração lavoura-pecuária. O objetivo deste estudo foi de determinar o efeito da integração lavoura-pecuária e diferentes manejos de manejo do solo nos seus atributos hídricos e mecânicos e relacioná-los com o desenvolvimento e a produtividade da soja. Os objetivos específicos foram: verificar o efeito da ausência do pisoteio animal sobre os atributos hídricos e mecânicos do solo e crescimento da soja; avaliar a suscetibilidade do solo à compactação, através dos parâmetros de compressibilidade do solo; verificar a relação da permeabilidade ao ar com a tensão da água e o espaço poroso do solo; avaliar a relação entre o crescimento das plantas e conteúdo de água; avaliar o efeito residual da escarificação. O experimento foi instalado no ano de 2007, numa área agrícola comercial, no município de Ibirubá (RS). O solo do local é classificado como Latossolo Vermelho
distrófico. Avaliaram-se a densidade (Ds), macroporosidade (Ma), microporosidade (Mi) e porosidade total (Pt) a resistência do solo à penetração (RP) e a umidade (θ)do solo, bem como emergência e altura de planta, crescimento radicular e produtividade da soja. O delineamento experimental foi blocos ao acaso com três repetições. Os tratamentos foram: semeadura direta sem pastejo (SD/SP),
semeadura direta com pastejo (SD/CP) e escarificado (Esc). A Ds, Mi, Ma, Pt, CRA e a Ka foram determinadas em amostras de solo coletada com estrutura preservada nas camadas de 0-0,07; 0,07- 0,15 e 0,20-0,30 m, em três épocas: antes do pastejo (agosto de 2007), pós-pastejo (dezembro de
2007) e pós-pastejo (outubro de 2008). A curva de compressão do solo foi determinada em amostra equilibrada na tensão de 0,03 MPa nas duas primeiras camadas acima citadas. Os resultados indicaram que a escarificação em solos sob integração lavoura-pecuária sob plantio direto proporciona condições físico-hídrica do solo menos favoráveis ao desenvolvimento das plantas, afetando negativamente o rendimento de grãos da cultura da soja. O solo escarificado sofreu alterações impostas pelo pisoteio dos animais, reduzindo o efeito residual do mesmo. A ausência dos
animais não promoveu alterações expressivas na Ds, Mi, Ma e Pt no solo manejado sob plantio direto. A escarificação diminuiu a retenção de água comparado com solo não escarificado. A RP apresentou relação direta com a umidade, abaixo de 20 % obteve-se valores acima de 2 MPa de RP.
Na SD/CP o sistema radicular apresentou desvio de crescimento em profundidade, principalmente na camada 0-0,07 m, desvio não observado na SD/SP e no Esc. A altura de planta no SD/SP foi maior do que nos demais tratamentos e a menor produtividade de grãos foram obtidos no Esc. em ano com déficit hídrico. A maior Ka foi observada nos menores potenciais matriciais e na camada superficial do solo, onde há maior presença de macroporos, com redução em profundidade. Obteve-se uma relação direta entre a Ka e o εa do solo. A pressão aplicada pelo tráfego dos animais elevou os valores de σp na camada superficial. Com a escarificação do solo a camada superficial, houve menor capacidade
de suporte, ou seja, maior suscetibilidade à compactação.
|
46 |
Estudo Experimental da Camada de Cobertura do Aterro Morro do Céu, Niterói - RJ. / Experimental Study of Landfill Morro do Céu, Niterói - RJ, Cover Layer.Taísa Ferreira Lopes dos Santos 26 March 2009 (has links)
Este trabalho apresenta uma revisão bibliográfica sobre os conceitos de solos não saturados e
descreve os diversos tipos de camada de cobertura usadas em aterro de resíduos sólidos urbanos.
Apresenta trabalhos científicos que contemplam curvas características de solos tropicais
brasileiros. Caracteriza o solo usado antigamente como camada de cobertura do Aterro Morro do
Céu e este solo com adição de 5% de bentonita. Determina a curva característica desses dois
solos pelo Método do Papel Filtro e pela Placa de Sucção e, em seguida, Placa de Pressão. As
curvas obtidas por esses métodos apresentaram diferenças. A adição da bentonita no solo teve
como objetivo avaliar o desempenho do mesmo. O solo com adição de bentonita apresentou
maior plasticidade, menor permeabilidade e maior capacidade de retenção de água no solo.
Apresenta a modelagem de camadas monolíticas, camadas monolíticas evapotranspirativas,
barreiras capilares, barreiras capilares evapotranspirativas através do uso do Programa
VADOSE/W como ferramenta para aferição. / This study is a review about unsatured soils concepts and describes some types of soil cover
systems used in landfills. It presents scientific works about Brazilian tropical soils Water
Retention Curve. It characterizes the soil that was used as a cover layer system used at Morro do
Céu landfill and the same soil with addition of 5% of bentonite. It determinates the soil water
retention curve by Filter Paper Method and Suction Plate and, after that, Pressure Plate. The
curves obtained by these two methods showed differences. The objective of the addition of the
bentonite in the soil is to evaluate its performance. The soil with the addition of bentonite shows
higher plasticity, lower hydraulic conductivity and higher moisture storage. It presents the
modeling of monolithic covers, evapotranspirative monolithic covers, capillary barriers and
evapotranspirative capillary barriers by the use of VADOSE/W Program as a tool for gauging.
|
47 |
Funções de pedotransferência e estrutura de variabilidade espacial da retenção de água em solos de várzea do Rio Grande do Sul / Pedotransfer functions and spatial variability of water retention in lowland soils of Rio Grande do Sul stateNebel, Álvaro Luiz Carvalho 24 April 2009 (has links)
Made available in DSpace on 2014-08-20T14:36:56Z (GMT). No. of bitstreams: 1
Tese_ Alvaro_ Luiz_ Carvalho_ Nebel.pdf: 1615608 bytes, checksum: cf5d12660d9ae82ddc2e973b92c9812e (MD5)
Previous issue date: 2009-04-24 / The understanding of the dynamics of the water in the soil-plant-atmosphere system,
including the water availability to the crops, soil water infiltration, drainage and soil
solute movement, depends on the knowledge of the relation between the soil water
content and the matric potential, represented by the soil water retention curve
(SWRC). However, the establishment of SWRCs is laborious and time consuming,
besides being costly. A alternative is its estimate through statistical equations called
Pedotransfer Functions (PTFs). The aim of this study was to evaluate the ability of
some existing PTFs, in predicting the soil water retention and to capture its spatial
variability structure, using geostatistical tools, when applied in a lowland soil of the
south region of Brazil. For this, an experimental 10 x 10 m grid was established and
soil disturbed and undisturbed samples were collected in the 0-0.20 m soil depth,
totaling 100 experimental points. The following soil attributes were determined in
each point: soil texture, soil organic carbon, pH, cation exchange capacity, soil bulk
density, and the soil water retention curve. Eight developed PTFs for estimating
gravimetric soil water content, eight for estimating volumetric water content and five
for estimating the van Genuchten model parameters were evaluated using the
statistical measures mean error (ME), and the root mean square error (RMSE).
Results indicated that the Oliveira et al. (2002) PTF presented the best performance
for estimating the gravimetric soil water content at the tension of 33kPa, with mean
error (ME) value of 0.0136g.g-1, while for the gravimetric water content at tension of
1500kPa the Pidgeon (1972) FPT was the best, with ME value of -0,0054g.g-1.
Concerning to the potential of describing the spatial variability structure the Bell &
van Keulen (1995 and 1996) and of Urach (2007) PTFs presented the best
performance based on the results from the cross validation technique. For estimating
the soil water volumetric content at the tension of 10kPa the Tomasela et al. (2002)
was the best (ME of 0.019cm3.cm-3), while Rawls et al. (1982) and van den Berg et
al. (1997) PTFs were the best for estimating soil water content at the tension of
33kPa (ME of 0.001cm3.cm-3) and 1500kPa (ME of -0.008cm3.cm-3), respectively.
The range and sill geostatistical parameters for the tension of 33kPa were
reasonable estimated, while for the tension of 1500kPa they were underestimated by
the evaluated PTFs. The Parametric Pedotransfer Function constructed by
Vereecken et al.(1989) presented the lowest value of ME (0.0247cm3.cm-3), while the
Hodnett and Tomasella (2002) PTF presented the lowest value of RMSE (0.0367
cm3.cm-3). Both PTFs well described the experimental semivariograms of the soil
water content at the tensions of 10kPa and 33kPa, however their performance was
not good for the tension of 1500kPa. / Estudos que envolvem a dinâmica da água no sistema solo-planta-atmosfera tais
como disponibilidade de água no solo para as culturas, infiltração, drenagem e
movimento de solutos no solo necessitam do conhecimento da relação entre o
conteúdo de água no solo e o potencial matricial, representada pela curva de
retenção de água no solo. No entanto, sua execução é laboriosa, demanda
considerável tempo e custos. Uma alternativa é sua estimativa através de equações
estatísticas denominadas Funções de Pedotransferência (FPTs). O objetivo deste
estudo foi avaliar o desempenho de funções de pedotransferência em estimar a
retenção de água no solo e capturar a sua estrutura de variabilidade espacial,
usando ferramentas geoestatísticas, quando aplicadas em um solo de várzea da
região sul do Brasil. Para isto, uma malha experimental de 10m x 10m foi
estabelecido e amostras deformadas e indeformadas do solo foram coletadas
representativas da camada de 0 0,20m, totalizando 100 pontos amostrais. Os
seguintes atributos do solo foram determinados em cada ponto: textura, carbono
orgânico, pH, capacidade de troca de cátions, densidade do solo e a curva de
retenção de água no solo. Oito FPTs desenvolvidas para estimar o conteúdo
gravimétrico de água no solo, oito para estimar o conteúdo volumétrico e cinco para
estimar os parâmetros do modelo de van Genuchten foram avaliadas, usando as
medidas estatísticas erro médio (ME) e raiz quadrada do erro médio ao quadrado
(RMSE). Os resultados obtidos para a estimativa do conteúdo de água gravimétrico
mostram que a FPT de Oliveira et al. (2002) apresentou o melhor desempenho para
a tensão de 33kPa, com erro médio (ME) de 0,0136g.g-1, enquanto para a tensão de
1500kPa a FPT de Pidgeon (1972) foi melhor, com ME de -0,0054g.g-1. Com relação
ao potencial de descrever a estrutura de variabilidade espacial do conjunto de dados
medidos, as FPTs desenvolvidas por Bell & van Keulen (1995 e 1996) e Urach
(2007) foram as que apresentaram melhor desempenho baseado nos resultados da
validação cruzada. Para o conteúdo volumétrico de água retida no solo, os melhores
desempenhos foram obtidos pela FPT de Tomasela et al.(2003) para a tensão de
10kPa, Rawls et al. (1982) para 33kPa e van den Berg et al.(1997) para 1500kPa,
com ME iguais a 0,019cm3.cm-3, 0,001cm3.cm-3 e -0,008cm3.cm-3, respectivamente.
Os parâmetros da estrutura de dependência espacial, alcance e patamar, para a
tensão de 33kPa foram razoavelmente estimados, enquanto para a tensão de
1500kPa foram subestimados pelas FPTs avaliadas. A FPT paramétrica
desenvolvida por Vereecken et al. (1989) apresentou o menor valor de ME
(0,0247cm3.cm-3), enquanto a FPT de Hodnett e Tomasella (2002) apresentou o
menor valor de RMSE (0,0367 cm3.cm-3). Ambas FPTs descreveram bem os
semivariogramas experimentais do conteúdo de água retido no solo a 10kPa e
33kPa, entretanto para a tensão de 1500kPa nenhuma das FPTs testadas
apresentou bom desempenho.
|
48 |
Porovnání hydraulických vlastností kavernózně zvětralých hornin do tvarů tafoni a voštin / Comparison of hydraulic characteristics of cavernous weathering rocks forming tafoni and honeycombsStudencová, Alžběta January 2017 (has links)
Forms of cavernous weathering - tafoni and honeycombs - belong to long-term investigated and discussed phenomena in geology. The reason for the difference in size between few centimetres- long honeycombs and the several-metres-long tafoni has not been yet studied. In my master thesis I compared the hydraulic properties of rocks with developed honeycombs and tafoni. The research consists of field measurements (measurement of suction pressures and capillary water absorption using Karsten tube) and laboratory measurements on tafoni and honeycomb samples (retention curve measurement, capillary water absorption, water vapour diffusion rate and saturated hydraulic conductivity). I have been studing honeycombs from various sites in the Bohemian Cretaceous Basin and tafoni from three different sites: Carbon Arkoses near Kralupy nad Vltavou, Cambrian Sandstone in Petra (Jordan) and Tunnel Spring Tuff in Crystal Peak (Utah). The measurements showed that values of suction pressure are far higher inside tafoni than inside honeycombs. This observation corresponds to different retention curves of studied rocks: steeper retention curve for honeycomb's quartz sandstone than for fine-grained arkosic sandstones to arkoses with tafoni. In the other part of my research I have compared the properties of hydrophobic...
|
49 |
Experimental Study on the Engineering Properties of GelfillAbdul-Hussain, Najlaa January 2011 (has links)
Gelfill (GF) is made of tailings, water, binder and chemical additives (Fillset, sodium silicate gel). The components of GF are combined and mixed on the surface and transported (by gravity and/or pumping) to the underground mine workings, where the GF can be used for both underground mine support and tailings storage.
Thermal (T), hydraulic (H), and mechanical (M) properties are important performance criteria of GF. The understanding of these engineering properties and their evolution with time are still limited due to the fact that GF is a new cemented backfill material.
In this thesis, the evolution of the thermal, hydraulic, mechanical, and microstructural properties of small GF samples are determined. Various binder contents of Portland cement type I (PCI) are used. The GF is cured for 3, 7, 28, 90, and 120 days. It is found that the thermal, hydraulic and mechanical properties are time-dependent or affected by the degree of binder hydration index. Furthermore, a relationship is found between the compressive strength and the saturated hydraulic conductivity of the GF samples.
The unsaturated hydraulic properties of GF samples have also been investigated. The outcomes show that unsaturated hydraulic conductivity is influenced by the degree of binder hydration index and binder content, especially at low suction ranges. Simple functions are proposed to predict the evolution of air-entry values (AEVs), residual water content, and fitting parameters from the van Genuchten model with the degree of hydration index (α). Furthermore, two columns are built to simulate the coupled thermo-hydro-mechanical (THM) behaviour of GF under drained and undrained conditions. The obtained results from the GF columns are compared with the small samples. It is observed that the mechanical properties, hydraulic properties (suction and water content), and temperature development are strongly coupled. The magnitude of these THM coupling factors is affected by the size of the GF. The findings also show that the mechanical, hydraulic and thermal properties of the GF columns are different from samples cured in plastic moulds.
|
50 |
Etude théorique et numérique du comportement poro-plastique endommageable non saturé des géomatériaux : application au stockage de déchets radioactifs / Numerical and theoretical study of unsaturated damageable poro-viscoplastic behaviour of geomaterials : application on storage of radioactive wasteBui, Tuan Anh 17 November 2014 (has links)
Ce travail de thèse a pour objet l’étude du comportement hydromécanique endommageable des géomateriaux non saturés. Plus précisément, cette recherche est appliquée à l’étude du comportement de galeries de stockage de déchets radioactifs en formation géologique profonde. Dans un premier temps, après avoir résumé les principaux traits du comportement hydromécanique des géomateriaux, en insistant sur l’effet de la succion et de l’endommagement mécanique, un nouveau modèle PPE-NS couplant les aspects hydromécaniques, de plasticité et d’endommagement isotrope est présenté. Etabli dans le cadre de la thermodynamique des milieux poreux, il est basé sur le concept de contrainte effective plastique et de la pression interstitielle équivalente. Supposant une distribution bimodale de tailles des pores pour les milieux poreux endommagés, l'effet d'endommagement sur le comportement hydraulique est modélisé au moyen des fonctions phénoménologiques. L’endommagement intervient donc aussi bien sur le comportement mécanique qu'hydraulique dans ce modèle. La prise en compte des contributions à l’énergie des interfaces venant à la fois de l'interaction mécanique entre les phases solide et fluide (via la pression équivalente) et du mécanisme physico-chimique de rétention d'eau (via la fonction de rétention d’eau) permet à ce modèle de décrire de façon pertinente le couplage bilatéral entre elles. Dans un deuxième temps, ce modèle rhéologique est appliqué au comportement de l’argillité du Callovo-Oxfordian, qui est potentiellement la roche hôte du stockage de déchets nucléaires en France, afin d’étudier les évolutions hydromécaniques d’une galerie type selon son cycle de vie simplifié. Tout d’abord, ce modèle est validé par des essais mécaniques et hydrauliques au laboratoire, en considérant des échantillons « homogènes ». Ensuite, l’approche analytique est utilisée pour constituer une solution exacte de référence de ce problème dans un cas limite d’une roche hôte poro-viscoplastique saturée. Cette solution permet de mieux comprendre l’effet du fluage sur le comportement de la galerie et aussi de tester la fiabilité d’autres solutions numériques complexes développées par la suite. Enfin, l’approche numérique des éléments finis est mise en œuvre afin d'implémenter le nouveau modèle PPE-NS dans un code de calcul initialement développé au LGCB (Laboratoire Génie Civil et Bâtiment). Sa validité est partiellement vérifiée en considérant le comportement « limite » en photoélasticité d'une galerie non revêtue ou des solutions quasi-analytiques ont été développées. Des études paramétriques dans le cas général d'un tunnel revêtu montrent la cohérence du modèle et mettent en lumière l’influence de la désaturation sur le comportement de la galerie. / This thesis aims to study the damageable hydromechanical behavior of unsaturated geomaterials. More precisely, the research is applied to study the behavior of underground galleries of radioactive waste disposals in deep geological formations. Firstly, after summarizing the main features of the hydro-mechanical behavior of geomaterials, emphasizing the effect of suction and damage, a new model PPE-N coupling hydromechanical interactions with plasticity and isotropic damage is presented. Established in the framework of thermodynamics of porous media, it is based on the concept of the so called plastic effective stress and equivalent pore pressure. Assuming a bimodal pore size distribution for cracked porous media and using the concept of bundle cylindrical capillaries, damage effects on hydraulic behaviour (water retention curve and hydraulic conductivity) is modelled using phenomenological functions. The accountance of the contributions to the interfacial energy from the mechanical internations between solid and fluid phases (via theequivalent pore pressure) as well as the physico-chemical mechanism of water retention (via the water retention function) enables this model to describe in apertinent manner bilateral couplings between them.Secondly, this constitutive model is applied to Callovo- Oxfordian argillite, which is the potential host rock for the French nuclear waste disposal, and then to study the evolution of the hydromechanical responses of an underground gallery according to its simplified life cycle. The model is first validated against a range of mechanical and hydraulic laboratory tests, considering "homogeneous" samples. The analytical approach is then used to provide an exact reference solution of this problem in the limiting case of a saturated poro-viscoplastic host rock. This solution allows to better understand the effect of creep on the behavior of the gallery and also to test the precision of other complex numerical solutions . Finally, the numerical approach using finite elemnts is used to implement the new model EPP-NS in a computer code originally developed in LGCB (Laboratoire Genie Civil et Batiment). Its validity is partly checked by examining the poroelastic behavior of an unlined tunnel where quasi-analytical solutions have been developed. Parametric studies in the generalcase of a lined tunnel demonstrate the consistency of the model and highlight the influence of desaturation on the behavior of the gallery.
|
Page generated in 0.0924 seconds