Modern day cars are often equipped with a vision system that collects informa- tion about the car and its surroundings. Camera calibration is extremely impor- tant in order to maintain high accuracy in an automotive safety applications. The cameras are calibrated offline in the factory, however the mounting of the camera may change slowly over time. If the angles of the actual mounting of the cam- era are known compensation for the angles can be done in software. Therefore, online calibration is desirable. This master’s thesis describes how to dynamically calibrate the roll angle. Two different methods have been implemented and compared.The first detects verti- cal edges in the image, such as houses and lamp posts. The second one method detects license plates on other cars in front of the camera in order to calculate the roll angle. The two methods are evaluated and the results are discussed. The results of the methods are very varied, and the method that turned out to give the best results was the one that detects vertical edges.

Motorradfahrer gehören zu den am meisten gefährdeten Verkehrsteilnehmern im Straßenverkehr. Häufig ist die Unfallursache ein Kontrollverlust auf Landstraßen, der durch Ausnutzung des physikalischen Potenzials in Form von größeren Schräglagenwinkeln vermieden werden könnte. Gleichzeitig sind in der Realität gefahrene Schräglagen über eine größere Gruppe von Fahrern und eine längere Strecke unbekannt, was vor allem auf die erforderliche spezielle Messtechnik zurückzuführen ist. Der Schwerpunkt liegt daher auf der Entwicklung eines kostengünstigen Messverfahrens zur Messung der Schräglagenwinkel von Motorrädern. Smartphones zeichnen sich in der Regel durch integrierte Inertialsensoren aus, die für die Erfassung der Fahrdynamik von Motorrädern geeignet sind. Mit Hilfe einer auf die Anforderungen zugeschnittenen Smartphone-App zur Erfassung von Messdaten auf dem Motorrad werden die Daten der Sensoren aufgezeichnet. Anschließend werden mittels einer Offline-Auswertung die Drehwinkel zwischen dem Smartphone und dem Motorrad-Koordinatensystem bestimmt, die inertialen Messdaten transformiert und der Schräglagenwinkel berechnet. Ein wesentlicher Bestandteil ist die Validierung der entwickelten Messkette durch einen Vergleich der Ergebnisse mit einem hochpräzisen Messsystem. Dieser wurde auf verschiedenen Strecken zur Bestimmung der Datenqualität durchgeführt. Als Machbarkeitsstudie diente eine Probandenstudie, die die Praxistauglichkeit der Messkette bestätigte. Die Studienergebnisse werden zusätzlich auszugsweise dargestellt und diskutiert. Die erfolgreiche Validierung auf verschiedenen Strecken, die Praxistauglichkeit der Datenerfassung und die Genauigkeit des Messsystems ermutigen dazu, die Smartphone-App auf ein größeres Panel von Testpersonen auszurollen und damit Daten über ein größeres Fahrerkollektiv zu erheben.:Introduction, State of Research, Methods, Measurement Chain Verification, Results and Discussion, Conclusion / Motorcyclists are among the most vulnerable road users in road traffic. Often, the cause of accidents is a loss of control on rural roads which could be averted by making use of the physical potential in terms of larger lean angles. At the same time, in reality driven lean angles over a larger group of riders and a longer route are unknown which is mainly due to the special measuring technology required. The focus is therefore on the development of a low-cost measurement method for measuring the lean angles of motorcycles. Smartphones are usually characterized by integrated inertial sensors, which are suitable for the acquisition of motorcycle driving dynamics. Employing a smartphone app tailored to the requirements for collecting measurement data on the motorcycle, the data of the sensors are recorded. During the offline evaluation, the rotation angles between the smartphone and the motorcycle coordinate system are determined, the inertial measurement data are transformed and the roll angle is calculated. An essential part is the alignment of the developed measurement chain with a high-precision measurement system. This was carried out on different routes and thus the data quality was determined. As a feasibility study, a test person study with several participants was carried out, which confirmed the practical suitability of the measurement chain. Hence, the study outcomes are briefly shown and discussed. The successful validation on different routes, the practical suitability of the data acquisition and the accuracy of the measurement system encourage to roll out the smartphone app to a larger panel of test persons and thus to collect data on a larger driver collective.:Introduction, State of Research, Methods, Measurement Chain Verification, Results and Discussion, Conclusion

Some of the results of an extensive track testing program at the Center for Vehicle Systems and Safety (CVeSS) at Virginia Tech for evaluating the roll stability of commercial trucks with 33-ft A-double trailers are evaluated. The study includes straight-rail trailers with heavy and light loading conditions. Commercial trucks are more susceptible to rollovers than passenger cars because of their higher center of gravity relative to their track width. Multi-trailer articulated heavy vehicles, such as A-doubles, are particularly prone to rollovers because of their articulation and rearward amplification. Electronic stability control (ESC) has been mandated by the National Highway Safety Administration (NHSTA) for Class 8 trucks and busses since 2017. When detecting oversteer or understeer, ESC automatically activates the brakes at the correct side of the steer and/or drive axle(s) to regain steering stability. ESC, however, often cannot sense the likelihood of trailer rollover in multi-trailer articulated heavy vehicles because of the articulation between the trailers and tractors. As a result of this, trailers are often equipped with roll stability control (RSC) systems to mitigate speed-induced rollovers. Sensing the trailer lateral acceleration, RSC activates the trailer brakes to reduce speed and lower the likelihood of rollover. However, a limited number of past studies have shown that the trailer roll angle may provide an earlier indication of a pending rollover than the lateral acceleration. This study intends to provide further analysis in this regard in an effort to improve the effectiveness of RSC systems for trailers. An extensive amount of data from track testing with a 33-ft A-double under heavy and light loading is evaluated. Particular attention is given to lateral accelerations and trailer roll angles prior to rollover and relative to RSC activation time. The study's results indicate that the trailer roll angle provides a slightly earlier indication of rollover than lateral acceleration during dynamic driving conditions, potentially resulting in a timelier activation of RSC. Of course, detecting the roll angle is often more challenging than lateral acceleration, which can be detected with an accelerometer. Additionally, the roll angle measurement may be subjected to errors and possibly unwanted RSC engagement. The study's results further indicate that the trailer-based RSC systems effectively mitigate rollovers in both quasi-steady-state and dynamic driving conditions. / Master of Science / Some of the results of an extensive track testing program at the Center for Vehicle Systems and Safety (CVeSS) at Virginia Tech for evaluating the roll stability of commercial trucks with 33-ft A-double trailers are evaluated. "33-ft A-doubles" commonly refer to a commercial truck that has a tractor with two trailers (in this case 33-ft in length) that are connected by an A-dolly. Their modularity and ease of connecting and disconnecting at various drop stations have made such commercial vehicles a common scene on U.S. highways due to the proliferation of e-commerce cargo. Compared to a single-unit or tractor semi-trailer combination, the double- or triple-trailer configurations offer several logistical benefits that make them more advantageous. The multi-trailer vehicles can carry more cargo per driver, lowering driver, fuel, and equipment costs significantly. There are, however, some challenges to operating multi-trailer articulated vehicles. On average, their accidents are more expensive than single-trailer or single-unit trucks. Additionally, they are more susceptible to rolling over and causing property damage, injuries, and at times fatalities. To reduce rollovers, systems with automated braking, called roll stability control (RSC), are often installed on the trailers. RSC applies the trailer brakes if it senses that the vehicle speed — the primary cause of most commercial vehicle accidents — exceeds the safe limit for negotiating a turn. In this study, we intend to evaluate the effectiveness of roll stability control (RSC) systems for reducing the likelihood of speed-induced rollovers. We will also explore ways of improving their performance. Namely, we will evaluate whether sensing the lateral acceleration of the trailer or its roll angle would provide a better means for timely activation of RSC. The study's results indicate that, although more challenging to measure, the trailer roll angle provides a slightly sooner indication of a pending rollover than lateral acceleration. The results also suggest that RSC systems vastly reduce the number of speed-induced rollovers in trucks with 33-ft A-double trailers under different trailer configurations and cargo weights.

Tato diplomová práce je zaměřená na stabilizátory u podvozku aut. První část popisuje všeobecné znalosti vlivu naklonění karosérie na jizdní vlastnosti auta a možnosti konstrukčních řešení používaných v praxi. Dále jsou v této části uvedeny nevýhody použití stabilizátoru a jejich náhrady. Nasledující téma se zaměřuje na soutěž Formule Student a její všeobecná pravidla. Hlavní částí této práce je analýza stabilizátoru Formule Ford, na kterou v poslední části této práce navazuje analýza předního a zadního stabilizátoru Formule Student. Byly vytvořené kompletní MBS modely pro přední a zadní zavěšení včetně stabilizátoru. Díky těmto modelům bylo možné provést výpočty klopných tuhostí a pevnostní výpočty. Z těchto výpočtů bylo možné určit vhodné nastavení stabilizátoru. Všechny modely mohou být dále použitelné pro analýzu jízdních vlastností příslušného vozidla.

The subject of this master's thesis is design measurement and measure change wheel camber angle during driving. For this task were used parts from Corrsys-Datron and remaining elements needed to be manufactured. With complete system measurements were done and outputs data were displayed by Matlab and evaluated. Based on data evaluation is possible exactly determine relative position of the wheel to the road surface and to the body of vehicle.

Real-Time Rollover prevention of Unmanned Ground Vehicle (UGV) is very paramount to its reliability and survivability mostly when operating on unknown and rough terrains like mines or other planets.Therefore this research presents the method of real-time rollover prevention of UGVs making use of Adaptive control techniques based on Recursive least Squares (RLS) estimation of unknown parameters, in order to enable the UGVs to adapt to unknown hush terrains thereby increasing their reliability and survivability. The adaptation is achieved by using indirect adaptive control technique where the controller parameters are computed in real time based on the online estimation of the plant’s (UGV) parameters (Rollover index and Roll Angle) and desired UGV’s performance in order to appropriately adjust the UGV speed and suspension actuators to counter-act the vehicle rollover. A great challenge of indirect adaptive control system is online parameter identification, where in this case the RLS based estimator is used to estimate the vehicles rollover index and Roll Angle from lateral acceleration measurements and height of the centre of gravity of the UGV. RLS is suitable for online parameter identification due to its nature of updating parameter estimate at each sample time. The performance of the adaptive control algorithms and techniques is evaluated using Matlab Simulink® system model with the UGV Model built using SimMechanics physical modelling platform and the whole system runs within Simulink environment to emulate real world application. The simulation results of the proposed adaptive control algorithm based on RLS estimation, show that the adaptive control algorithm does prevent or minimize the likely hood of vehicle rollover in real time. / Electrical and Mining Engineering / M. Tech. (Electrical Engineering)

This work is focused on the development of a thorough study about ISO standards focused on the vehicle dynamics, standardized tests of vehicle dynamics and measured variables that allow us to describe and model the behaviour of riding vehicles properly. In the Appendix A of the thesis, there is a list of all known ISO standards dealing with given topic. The standard ISO 15037-1 Road vehicles – Vehicle dynamics test methods, Part 1: General conditions for passenger cars is described in detail, including the forms for test reports and the Appendix C and D. In the thesis, there is also described a model of minimal needed measuring system that is still in good accordance with the standard ISO 15037-1 and fulfills all its requirements. Detailed description of all used sensors that are used to measure required variables is given, as well as a short description of all sensors that are used for measurement of other variables. After that, measurement abilities of the instrumentation of measuring system RIO used in ÚADI FSI Brno is compared and confronted with requirements given by the standard, to see, if all given criteria are properly fulfilled. Because of the fact that standard-given criteria are quite mild, while the equipment of the faculty is high-level technology, mostly made directly for measuring of dynamic parameters of the vehicles, including racing vehicles, the system is in full accordance with the standard ISO 15037-1.