21 |
Variações da estrutura da crosta, litosfera e manto para a plataforma Sul Americana através de funções do receptor para ondas P e S / Variations in the crustal, lithosphere and mantle structure for the South American platform using P- and S-waves receiver functionsMarcelo Belentani de Bianchi 29 August 2008 (has links)
Utilizamos neste trabalho duas metodologias distintas, a função do receptor com ondas P e a função do receptor com ondas S, para mapear variações da crosta e interfaces do manto (litosfera-astenosfera, 410 km e 660 km) em diferentes estações sismográficas na placa Sul-Americana. No estudo da interface litosfera-astenosfera, por ser o primeiro realizado nesta região, utilizamos as estações temporárias do IAG/USP em conjunto com as estações permanentes da rede mundial cobrindo toda a placa Sul-Americana. O estudo para as outras interfaces (Crosta-Manto, 410 km e 660 km) foi feito com caráter regional, buscando detalhar características da crosta e manto na região estável da placa. Para ambos os métodos os traços (sismogramas) foram rotacionados para o sistema LQT, deconvolvidos, agrupados por pontos de perfuração e por estações, e finalmente empilhados. Nos traços empilhados as fases convertidas de interesse (Ps, Ppps, Ppss+Psps e Sp) foram identificadas e interpretadas. Para a parte estável da placa obtivemos um valor médio de espessura da crosta de 39.4±0.6 km, variando desde 31.0±0.5 km para a província Borborema, até 41.3±1.0 km para a bacia do Paraná, onde aplicamos uma correção para descontar o efeito do sedimento. A razão de velocidade para a crosta, Vp/Vs, apresentou valores mais altos para a bacia do Paraná (~1.75±0.08) e região litorânea oriental (>1.74), enquanto que as regiões cratônicas (cráton São Francisco e Amazônico) apresentaram valores de Vp/Vs baixos (<1.72), chegando até 1.68. O valor médio de Vp/Vs para todas as estações analisadas foi de 1.73±0.02. As variações dos tempos para as interfaces do manto mostraram boa correlação com resultados de tomografia sísmica de outros trabalhos, indicando alterações de até 5% na velocidade das ondas sísmicas para o manto superior sob os crátons, uma deflexão de até 15 km na interface de 660 km para a região Sul da bacia do Paraná e se mostraram bem correlacionadas com as médias globais para as outras região estudadas. Por fim, a espessura da litosfera apresentou valores desde ~40 km, sob as regiões de ilhas oceânicas, até ~160 km, sob as regiões mais estáveis. Para as regiões oceânicas a espessura da litosfera se mostra correlacionada com a idade da placa. À medida que adentramos a parte continental, o limite litosfera-astenosfera se torna menos proeminente, atingindo profundidades maiores no interior dos continentes e menores para as regiões marginais. Para a zona de subducção, observamos duas possíveis litosferas, uma oceânica, subduzindo junto com a placa de Nazca, e outra pertencente à parte continental. / Two distinct methodologies, the P- and S-wave receiver functions, are used to map variations in the crustal parameters (thickness and Vp/Vs) and mantle interfaces (lithosphere-asthenosphere, 410 km and 660 km) on a number of different seismograph stations located in the South American plate. The results of the S receiver function for the lithosphere-asthenosphere boundary are the first of this kind ever performed in South American continent and showed the large scale variations of this interface. To perform this study we analyze data from various global permanent stations together with all available data from temporary stations operated by the IAG/USP during the last15 years. For both methods the traces (seismograms) were rotated to the LQT system, deconvolved, grouped by piercing points and stations, and finally stacked. In the stacked traces, the converted phases (Ps, Ppps, Ppss+Psps and Sp) were identified and interpreted. Inside the stable part of the plate we found a mean crustal thickness of 39.4±0.6 km, ranging from 31.0±0.5 km in Borborema Province up to 41.3±1.0 km in the Paraná Basin, where we applied a correction to remove the sediment effects on the crustal estimates. The crustal velocity ratios, Vp/Vs, showed higher values for the Paraná Basin (~1.75±0.08) and Ribeira belt (>1.74), while the cratonic regions (São Francisco and Amazon cratons) showed low values of Vp/Vs (<1.72), down to 1.68. The average Vp/Vs obtained for all stations was equal to 1.73±0.02. The observed times of the converted mantle phases presented a good correlation with other tomographic studies, indicating that the upper mantle for the cratonic roots may be characterized by a variation up to 5% in seismic velocities, a 15 km deflection in the South Paraná 660 km discontinuity (probably due to a decreased temperature caused by the subducted slab); for other regions the converted times were close to the global average. As a final result, the lithospheric thickness presented values ranging from ~40 km under oceanic islands, to ~160 km under the stable continental regions. We found that for the oceanic islands the thickness of the lithosphere is correlated with the age of the plate. When we go further inside the continents, the lithosphere-asthenosphere boundary becomes less sharp, reaching larger depths inside the continents and shallower depths near the continental margin. In the Andean subduction area, we observed two possibles lithospheres, one oceanic, subducting together with the Nazca plate, and another belonging to the Continent, parallel to the crust interface.
|
22 |
Terahertz and infrared spectroscopy of novel superconductorsChanda, Geoffrey 12 November 2014 (has links)
The present thesis is devoted to the investigation of novel superconductors by phase-sensitive terahertz transmission and infrared to ultraviolet spectroscopy. In particular, a nominally undoped Pr2CuO4 superconducting thin film, an FeTe0.5Se0.5 thin film, and a LiFeAs single crystal have been investigated. The emphasis is on the low-frequency part of the optical spectrum (i.e., the terahertz and infrared spectrum), as the goal of the study was to shed light on the size and symmetry of the superconducting gaps and also to determine the temperature dependences as well as the absolute values of the penetration depth, which are key input parameters for models applicable for new superconductors. In addition, niobium has been investigated as a reference, so as to see what is expected from conventional superconductors and to clarify the electrodynamics of niobium.
A superconducting Nb thin film with Tc of 8.04 K has been investigated by backward wave oscillator-based (BWO-based) and time-domain terahertz (TDT) spectrometers in the frequency range between 4 and 100 cm−1 for temperatures ranging from 2 to 10 K. From these measurements an energy gap of 22.50 cm−1 = 2.79 meV = 4.02kBTc have been determined. The optical conductivity below Tc could nicely be described by calculations according to the Eliashberg theory, with the electron-phonon interaction evaluated from tunneling measurements.
Absolute values of the penetration depth have been calculated from phase-sensitive terahertz measurements. The zero-temperature limit of at T = 0 is found to be 115 ± 5 nm. From this value, a London penetration depth of 43 ± 2 nm has been obtained. The overall temperature dependence of the penetration depth follows a behavior typical for conventional s-wave superconductors.
A superconducting Pr2CuO4 film with T0 structure and Tc of 27 K has been investigated by use of optical methods in a wide frequency (5 – 55000 cm−1) and temperature (2 – 300 K) range. A Drude-like peak centered at zero frequency is observed in the optical conductivity below 150 K, above which it shifts to finite frequencies. The detailed analysis of the low-frequency conductivity reveals that the Drude peak and a far-infrared (FIR) peak centered at about 300 cm−1 persist at all temperatures. The FIR spectral weight is found to grow at the expense of the Drude spectral weight with increasing temperature. Absolute values of the penetration depth have been obtained from temperature and frequency-dependent measurements. The zero-temperature limit of is estimated to be 1600 ± 100 nm. The overall temperature dependence of follows a behaviour typical for cuprate superconductors. However, a closer look at the penetration depth at T 12 K reveals a flattening in the temperature dependence.
A superconducting FeTe0.5Se0.5 thin film with Tc = 19 K has been investigated using a combination of BWO and TDT spectroscopy in the frequency range 4 - 80 cm−1 and between 3 and 150 K. From such measurements, a superconducting energy gap of 30 cm−1, representing a coupling strength = 2.27, is observed. Further, the penetration depth has been derived from the temperature dependence of the imaginary part of complex conductivity with the penetration depth = 530 ± 10 nm at lowest measured temperature. The temperature-dependent normalized superfluid density, just as is the case with most iron-based superconductors, could nicely be described by the so-called two-gap gamma model.
Finally, a superconducting LiFeAs single crystal with Tc = 18 K has been investigated by optical spectroscopy in the frequency range 15 - 55000 cm−1 between 5 and 300 K. From these measurements, no clear signature of the superconducting energy-gap opening could be identified in spite of the spectral weight been suppressed in the infrared frequency regime below Tc. This indicates that LiFeAs single crystal is in a clean limit. With the aid of the Ferrell-Glover-Tinkham (FGT) sum rule, an absolute penetration depth of 215 nm has been calculated from the missing area at 5 K.
|
23 |
Lambda femtoscopy in √s<sub>NN</sub> = 2.76 TeV Pb-Pb collisions at ALICESalzwedel, Jai 08 August 2017 (has links)
No description available.
|
24 |
DYNAMICKÁ ANALÝZA ZÁKLADOVÉ KONSTRUKCE V INTERAKCI S PODZÁKLADÍM / DYNAMIC ANALYSIS OF THE SOIL-FOUNDATION INTERACTIONMartinásek, Josef Unknown Date (has links)
Thesis deals with problems of the soil-structure interaction. In the theoretical part is described the approach to mathematical modeling of structure-foundation-soil interaction. The subsoil models are further described in detail, including the models with piles (both static and dynamics models). In the next chapter there is described the dynamics theory of the systems with single or more degrees of freedom. There is also an analysis of propagation, reflection and refraction of mechanical one-dimensional waves (P-wave, S-wave) and spatial waves (P- wave, SV-wave, SH-wave) and waves in homogeneous half-space (R-wave L-wave). The numerical analysis is logically sorted from hand calculation of the parameter change influence on the modal characteristics to complex computational FEM model of the machine with a foundation on piles placed in the spatial block of soil. Numerical studies aim to determine the influence of the subsoil model on the modal characteristics and thus confirm the absolute necessity of the subsoil model in tasks of dynamics. The next goal is to determine the appropriate key parameters of the computational model: the size of finite element, suitable shape of subsoil model, suitable inclination of boundary condition and suitable boundary conditions. For creating of set of computational models was used language APDL in conjunction with ANSYS software interface. All used input files are listed in the Annex.
|
Page generated in 0.0895 seconds