61 |
Rate Transient Analysis in Shale Gas Reservoirs with Transient Linear BehaviorBello, Rasheed O. 2009 May 1900 (has links)
Many hydraulically fractured shale gas horizontal wells in the Barnett shale have been
observed to exhibit transient linear behavior. This transient linear behavior is
characterized by a one-half slope on a log-log plot of rate against time. This transient
linear flow regime is believed to be caused by transient drainage of low permeability
matrix blocks into adjoining fractures. This transient flow regime is the only flow regime
available for analysis in many wells.
The hydraulically fractured shale gas reservoir system was described in this work
by a linear dual porosity model. This consisted of a bounded rectangular reservoir with
slab matrix blocks draining into adjoining fractures and subsequently to a horizontal well
in the centre. The horizontal well fully penetrates the rectangular reservoir. Convergence
skin is incorporated into the linear model to account for the presence of the horizontal
wellbore.
Five flow regions were identified with this model. Region 1 is due to transient
flow only in the fractures. Region 2 is bilinear flow and occurs when the matrix drainage
begins simultaneously with the transient flow in the fractures. Region 3 is the response for a homogeneous reservoir. Region 4 is dominated by transient matrix drainage and is
the transient flow regime of interest. Region 5 is the boundary dominated transient
response. New working equations were developed and presented for analysis of Regions
1 to 4. No equation was presented for Region 5 as it requires a combination of material
balance and productivity index equations beyond the scope of this work.
It is concluded that the transient linear region observed in field data occurs in
Region 4 – drainage of the matrix. A procedure is presented for analysis. The only
parameter that can be determined with available data is the matrix drainage area, Acm.
It was also demonstrated in this work that the effect of skin under constant rate
and constant bottomhole pressure conditions is not similar for a linear reservoir. The
constant rate case is the usual parallel lines with an offset but the constant bottomhole
pressure shows a gradual diminishing effect of skin. A new analytical equation was
presented to describe the constant bottomhole pressure effect of skin in a linear
reservoir.
It was also demonstrated that different shape factor formulations (Warren and
Root, Zimmerman and Kazemi) result in similar Region 4 transient linear response
provided that the appropriate f(s) modifications consistent with lAc calculations are
conducted. It was also demonstrated that different matrix geometry exhibit the same
Region 4 transient linear response when the area-volume ratios are similar.
|
62 |
Study of Flow Regimes in Multiply-Fractured Horizontal Wells in Tight Gas and Shale Gas Reservoir SystemsFreeman, Craig M. 2010 May 1900 (has links)
Various analytical, semi-analytical, and empirical models have been proposed to characterize rate and pressure behavior as a function of time in tight/shale gas systems featuring a horizontal well with multiple hydraulic fractures. Despite a small number of analytical models and published numerical studies there is currently little consensus regarding the large-scale flow behavior over time in such systems. The purpose of this work is to construct a fit-for-purpose numerical simulator which will account for a variety of production features pertinent to these systems, and to use this model to study the effects of various parameters on flow behavior. Specific features examined in this work include hydraulically fractured horizontal wells, multiple porosity and permeability fields, desorption, and micro-scale flow effects. The theoretical basis of the model is described in Chapter I, along with a validation of the model. We employ the numerical simulator to examine various tight gas and shale gas systems and to illustrate and define the various flow regimes which progressively occur over time. We visualize the flow regimes using both specialized plots of rate and pressure functions, as well as high-resolution maps of pressure distributions. The results of this study are described in Chapter II. We use pressure maps to illustrate the initial linear flow into the hydraulic fractures in a tight gas system, transitioning to compound formation linear flow, and then into elliptical flow. We show that flow behavior is dominated by the fracture configuration due to the extremely low permeability of shale. We also explore the possible effect of microscale flow effects on gas effective permeability and subsequent gas species fractionation. We examine the interaction of sorptive diffusion and Knudsen diffusion. We show that microscale porous media can result in a compositional shift in produced gas concentration without the presence of adsorbed gas. The development and implementation of the micro-flow model is documented in Chapter III. This work expands our understanding of flow behavior in tight gas and shale gas systems, where such an understanding may ultimately be used to estimate reservoir properties and reserves in these types of reservoirs.
|
63 |
Multi-phase fluid-loss properties and return permeability of energized fracturing fluidsRibeiro, Lionel Herve Noel 20 August 2012 (has links)
With the growing interest in low-permeability gas plays, foam fracturing fluids are now well established as a viable alternative to traditional fracturing fluids. Present practices in energized fracturing treatments remain nonetheless rudimentary in comparison to other fracturing fluid technologies because of our limited understanding of multi-phase fluid-loss and phase behavior occurring in these complex fluids. This report assesses the fluid-loss benefits introduced by energizing the fracturing fluid.
A new laboratory apparatus has been specifically designed and built for measuring the leak-off rates for both gas and liquid phases under dynamic fluid-loss conditions. This report provides experimental leak-off results for linear guar gels and for N2-guar foam-based fracturing fluids under a wide range of fracturing conditions. In particular, the effects of the rock permeability, the foam quality, and the pressure drop are investigated. Analysis of dynamic leak-off data provide an understanding of the complex mechanisms of viscous invasion and filter-cake formation occurring at the pore-scale.
This study presents data supporting the superior fluid-loss behavior of foams, which exhibit minor liquid invasion and limited damage. It also shows direct measurements of the ability of the gas component to leak-off into the invaded zone, thereby increasing the gas saturation around the fracture and enhancing the gas productivity during flowback. Our conclusions not only confirm, but add to the findings of McGowen and Vitthal (1996) for linear gels, and the findings of Harris (1985) for nitrogen foams. / text
|
64 |
Alternative groundwater resources in North-central Texas for the development of the Barnett Shale gas playMcGlynn, Edward R. 27 November 2012 (has links)
Texas water resources are under pressure due to population growth expected in the coming decades, increasing industrial demands, and frequent periods of drought. With this increasing demand for limited water resources it is important to explore alternative water sources within the State. One of those resources that can be developed is the many small aquifers which have never been well-characterized but could be an alternative source of fresh and brackish water for agriculture, municipal, and industrial applications.
The natural gas industry’s demand for water is growing in Texas as new drilling techniques such a hydraulic fracturing have opened new reserves previously considered economically non-viable. The development of smaller aquifers containing brackish water is a viable alternative to the gas industry’s current reliance on fresh (potable) groundwater resources. The aquifer sections containing brackish water need to be mapped and characterized so they can be developed as an alternative water resource by the gas industry.
The Barnett Shale in North-central Texas is one of the first major gas plays in the United States to use the technique of hydraulic fracturing in field development. This technique requires large quantities of water to create the required hydraulic pressure down the gas well to fracture the normally low permeability shale. A typical horizontal well completion consumes approximately 3.0 to 3.5 million gallons (11,400 to 13,200 m3) of fresh water. Projections of future groundwater demand for the Barnett Shale gas play total 417,000 AF (5.1x108 m3), an annual average of 22,000 AF (2.7x107 m3) over the expected 2007-2025 development phase. This level of water demand has the gas industry and groundwater managers exploring alternative sources of water for future development of the Barnett Shale.
One alternative source of water for the expanding footprint of the Barnett Shale gas play are the smaller local Paleozoic aquifers on the western edge of the play. These small aquifers are underutilized and contain waters with higher levels of TDS. These levels are, however, acceptable to the drilling industry. In order to characterize theses aquifers, TWDB databases were utilized to analyze water chemistry and well productivity. / text
|
65 |
Exploring hydrocarbon-bearing shale formations with multi-component seismic technology and evaluating direct shear modes produced by vertical-force sourcesAlkan, Engin, 1979- 25 February 2013 (has links)
It is essential to understand natural fracture systems embedded in shale-gas reservoirs and the stress fields that influence how induced fractures form in targeted shale units. Multicomponent seismic technology and elastic seismic stratigraphy allow geologic formations to be better images through analysis of different S-wave modes as well as the P-wave mode.
Significant amounts of energy produced by P-wave sources radiate through the Earth as downgoing SV-wave energy. A vertical-force source is an effective source for direct SV radiation and provides a pure shear-wave mode (SV-SV) that should reveal crucial information about geologic surfaces located in anisotropic media. SV-SV shear wave modes should carry important information about petrophysical characteristics of hydrocarbon systems that cannot be obtained using other elastic-wave modes. Regardless of the difficulties of extracting good-quality SV-SV signal, direct shear waves as well as direct P and converted S energy should be accounted for in 3C seismic studies. Acquisition of full-azimuth seismic data and sampling data at small intervals over long offsets are required for detailed anisotropy analysis. If 3C3D data can be acquired with improved signal-to-noise ratio, more uniform illumination of targets, increased lateral resolution, more accurate amplitude attributes, and better multiple attenuation, such data will have strong interest by the industry.
The objectives of this research are: (1) determine the feasibility of extracting direct SV-SV common-mid-point sections from 3-C seismic surveys, (2) improve the exploration for stratigraphic traps by developing systematic relationship between petrophysical properties and combinations of P and S wave modes, (3) create compelling examples illustrating how hydrocarbon-bearing reservoirs in low-permeable rocks (particularly anisotropic shale formations) can be better characterized using different S-wave modes (P-SV, SV-SV) in addition to the conventional P-P modes, and (4) analyze P and S radiation patterns produced by a variety of seismic sources.
The research done in this study has contributed to understanding the physics involved in direct-S radiation from vertical-force source stations. A U.S. Patent issued to the Board of Regents of the University of Texas System now protects the intellectual property the Exploration Geophysics Laboratory has developed related to S-wave generation by vertical-force sources. The University’s Office of Technology Commercialization is actively engaged in commercializing this new S-wave reflection seismic technology on behalf of the Board of Regents. / text
|
66 |
Gas flow through shaleSakhaee-Pour, Ahmad 14 November 2013 (has links)
The growing demand for energy provides an incentive to pursue unconventional resources. Among these resources, tight gas and shale gas reservoirs have gained significant momentum because recent advances in technology allowed us to produce them at an economical rate. More importantly, they seem likely to contain a significant volume of hydrocarbon. There are, however, many questions concerning hydrocarbon production from these unconventional resources. For instance, in tight gas sandstone, we observe a significant variability in the producibilities of wells in the same field. The heterogeneity is even present in a single well with changes in depth. It is not clear what controls this heterogeneity. In shale gas, the pore connectivity inside the void space is not well explored and hence, a representative pore model is not available. Further, the effects of an adsorbed layer of gas and gas slippage on shale permeability are poorly understood. These effects play a crucial role in assigning a realistic permeability for shale in-situ from a laboratory measurement. In the laboratory, in contrast to in-situ, the core sample lacks the adsorbed layer because the permeability measurements are typically conducted at small pore pressures. Moreover, the gas slippages in laboratory and in-situ conditions are not identical. The present study seeks to investigate these discrepancies. Drainage and imbibition are sensitive to pore connectivity and unconventional gas transport is strongly affected by the connectivity. Hence, there is a strong interest in modeling mercury intrusion capillary pressure (MICP) test because it provides valuable information regarding the pore connectivity. In tight gas sandstone, the main objective of this research is to find a relationship between the estimated ultimate recovery (EUR) and the petrophysical properties measured by drainage/imbibition tests (mercury intrusion, withdrawal, and porous plate) and by resistivity analyses. As a measure of gas likely to be trapped in the matrix during production---and hence a proxy for EUR---we use the ratio of residual mercury saturation after mercury withdrawal (S[subscript gr]) to initial mercury saturation (S[subscript gi]), which is the saturation at the start of withdrawal. Crucially, a multiscale pore-level model is required to explain mercury intrusion capillary pressure measurements in these rocks. The multiscale model comprises a conventional network model and a tree-like pore structure (an acyclic network) that mimic the intergranular (macroporosity) and intragranular (microporosity) void spaces, respectively. Applying the multiscale model to porous plate data, we classify the pore spaces of rocks into macro-dominant, intermediate, and micro-dominant. These classes have progressively less drainage/imbibition hysteresis, which leads to the prediction that significantly more hydrocarbon is recoverable from microporosity than macroporosity. Available field data (production logs) corroborate the higher producibility of the microporosity. The recovery of hydrocarbon from micro-dominant pore structure is superior despite its inferior initial production (IP). Thus, a reservoir or a region in which the fraction of microporosity varies spatially may show only a weak correlation between IP and EUR. In shale gas, we analyze the pore structure of the matrix using mercury intrusion data to provide a more realistic model of pore connectivity. In the present study, we propose two pore models: dead-end pores and Nooks and Crannies. In the first model, the void space consists of many dead-end pores with circular pore throats. The second model supposes that the void space contains pore throats with large aspect ratios that are connected through the rock. We analyze both the scanning electron microscope (SEM) images of the shale and the effect of confining stress on the pore size distribution obtained from the mercury intrusion test to decide which pore model is representative of the in-situ condition. We conclude that the dead-end pores model is more representative. In addition, we study the effects of adsorbed layers of CH₄ and of gas slippage in pore walls on the flow behavior in individual conduits of simple geometry and in networks of such conduits. The network is based on the SEM image and drainage experiment in shale. To represent the effect of adsorbed gas, the effective size of each throat in the network depends on the pressure. The hydraulic conductance of each throat is determined based on the Knudsen number (Kn) criterion. The results indicate that laboratory measurements made with N₂ at ambient temperature and 5-MPa pressure, which is typical for the transient pulse decay method, overestimate the gas permeability in the early life of production by a factor of 4. This ratio increases if the measurement is run at ambient conditions because the low pressure enhances the slippage and reduces the thickness of the adsorbed layer. Moreover, the permeability increases nonlinearly as the in-situ pressure decreases during production. This effect contributes to mitigating the decline in production rates of shale gas wells. Laboratory data available in the literature for methane permeability at pressures below 7 MPa agree with model predictions of the effect of pressure. / text
|
67 |
Identifying and mapping clay-rich intervals in the Fayetteville Shale : influence of clay on natural gas production intervalsRoberts, Forrest Daniel 18 February 2014 (has links)
The Fayetteville Shale is composed dominantly of clay, carbonate, and siliciclastic minerals. A variety of facies have been described by other workers and in this study, defined by mineral content, biota, fabric, and texture. Because the Fayetteville Shale is one of the top shale-gas producing plays in the U.S., an inquiry into key drivers of good-quality production is worthwhile. In particular, a hypothesis that intervals of high clay content should be avoided as production targets is investigated in this study. A high level of separation between wire-line log neutron porosity (NPHI) and density porosity (DPHI) in the Fayetteville Shale is observed in contrast to the wire-line log responses from the Barnett and Haynesville Shales. Clay minerals have a significant effect on NPHI, which in turn affects separation between NPHI and DPHI (PHISEP). X-Ray Diffraction (XRD) clay data was available for three wells, and efforts to correlate XRD results to PHISEP led to establishing NPHI as a reasonable proxy for clay. Using NPHI as a proxy it was possible to pick clay-rich intervals, map them across the study area, and to determine net clay in the Fayetteville Shale. Maps of net clay-rich intervals were compared to a map of production, but revealed no obvious correlation. Stratigraphic cross-sections showing the clay-rich intervals revealed a clay-poor interval in the upper part of the lower Fayetteville. This interval is the primary target for horizontal well completion. It is bounded above and below by more clay-rich intervals. Establishing the clay-rich intervals via porosity log separation (PHISEP) is one tool to help determine possible stratigraphic zones of gas production and can lead to a better understanding of intervals in which to expect production. / text
|
68 |
Seismic sensitivity to variations of rock properties in the productive zone of the Marcellus Shale, WVMorshed, Sharif Munjur 18 February 2014 (has links)
The Marcellus Shale is an important resource play prevalent in several states in the eastern United States. The productive zone of the Marcellus Shale has variations in rock properties such as clay content, kerogen content and pore aspect ratio, and these variations may strongly effect elastic anisotropy. The objective of this study is to characterize surface seismic sensitivity for variations in anisotropic parameters relating to kerogen content and aspect ratio of kerogen saturated pores. The recognized sensitivity may aid to characterize these reservoir from surface seismic observations for exploration and production of hydrocarbon.
In this study, I performed VTI anisotropic modeling based on geophysical wireline log data from Harrison County, WV. The wireline log data includes spectral gamma, density, resistivity, neutron porosity, monopole and dipole sonic logs. Borehole log data were analyzed to characterize the Marcellus Shale interval, and quantify petrophysical properties such as clay content, kerogen content and porosity. A rock physics model was employed to build link between petrophysical properties and elastic constants. The rock physics model utilized differential effective medium (DEM) theory, bounds and mixing laws and fluid substitution equations in a model scheme to compute elastic constants for known variations in matrix composition, kerogen content and pore shape distribution.
The seismic simulations were conducted applying a vertical impulse source and three component receivers. The anisotropic effect to angular amplitude variations for PP, PS and SS reflections were found to be dominantly controlled by the Thomsen Ɛ parameter, characterizing seismic velocity variations with propagation direction. These anisotropic effect to PP data can be seen at large offset (>15o incidence angle). The most sensitive portion of PS reflections was observed at mid offset (15o-30o). I also analyzed seismic sensitivity for variations in kerogen content and aspect ratio of structural kerogen. Elastic constants were computed for 5%, 10%, 20% and 30% kerogen content from rock physics model and provided to the seismic model. For both kerogen content and aspect ratio model, PP amplitudes varies significantly at zero to near offset while PS amplitude varied at mid offsets (12 to 30 degree angle of incidences). / text
|
69 |
Numerical modeling of complex hydraulic fracture development in unconventional reservoirsWu, Kan 15 January 2015 (has links)
Successful creations of multiple hydraulic fractures in horizontal wells are critical for economic development of unconventional reservoirs. The recent advances in diagnostic techniques suggest that multi-fracturing stimulation in unconventional reservoirs has often caused complex fracture geometry. The most important factors that might be responsible for the fracture complexity are fracture interaction and the intersection of the hydraulic and natural fracture. The complexity of fracture geometry results in significant uncertainty in fracturing treatment designs and production optimization. Modeling complex fracture propagation can provide a vital link between fracture geometry and stimulation treatments and play a significant role in economically developing unconventional reservoirs. In this research, a novel fracture propagation model was developed to simulate complex hydraulic fracture propagation in unconventional reservoirs. The model coupled rock deformation with fluid flow in the fractures and the horizontal wellbore. A Simplified Three Dimensional Displacement Discontinuity Method (S3D DDM) was proposed to describe rock deformation, calculating fracture opening and shearing as well as fracture interaction. This simplified 3D method is much more accurate than faster pseudo-3D methods for describing multiple fracture propagation but requires significantly less computational effort than fully three-dimensional methods. The mechanical interaction can enhance opening or induce closing of certain crack elements or non-planar propagation. Fluid flow in the fracture and the associated pressure drop were based on the lubrication theory. Fluid flow in the horizontal wellbore was treated as an electrical circuit network to compute the partition of flow rate between multiple fractures and maintain pressure compatibility between the horizontal wellbore and multiple fractures. Iteratively and fully coupled procedures were employed to couple rock deformation and fluid flow by the Newton-Raphson method and the Picard iteration method. The numerical model was applied to understand physical mechanisms of complex fracture geometry and offer insights for operators to design fracturing treatments and optimize the production. Modeling results suggested that non-planar fracture geometry could be generated by an initial fracture with an angle deviating from the direction of the maximum horizontal stress, or by multiple fracture propagation in closed spacing. Stress shadow effects are induced by opening fractures and affect multiple fracture propagation. For closely spaced multiple fractures growing simultaneously, width of the interior fractures are usually significantly restricted, and length of the exterior fractures are much longer than that of the interior fractures. The exterior fractures receive most of fluid and dominate propagation, resulting in immature development of the interior fractures. Natural fractures could further complicate fracture geometry. When a hydraulic fracture encounters a natural fracture and propagates along the pre-existing path of the natural fracture, fracture width on the natural fracture segment will be restricted and injection pressure will increase, as a result of stress shadow effects from hydraulic fracture segments and additional closing stresses from in-situ stress field. When multiple fractures propagate in naturally fracture reservoirs, complex fracture networks could be induced, which are affected by perforation cluster spacing, differential stress and natural fracture patterns. Combination of our numerical model and diagnostic methods (e.g. Microseismicity, DTS and DAS) is an effective approach to accurately characterize the complex fracture geometry. Furthermore, the physics-based complex fracture geometry provided by our model can be imported into reservoir simulation models for production analysis. / text
|
70 |
Re-scaling Governance: First Nations and the Challenge of Shale Gas Development in British ColumbiaMurray, Mathew 03 September 2015 (has links)
The government of British Columbia faces a host of challenges as it attempts to establish a liquefied natural gas export industry and reignite unconventional shale gas production in northeast BC. Not only must it contend with a competitive and saturated global marketplace, but it must also address conflict with Treaty 8 First Nations whose treaty rights and traditional territories were impacted by early development. Shale gas impacts are intensely local, but First Nations have struggled to gain meaningful influence in colonial decision-making processes to ensure development decisions respect community values and authority. This research, conducted in partnership with Fort Nelson First Nation, explores the challenges and opportunities faced by the Nation in their efforts to reshape governance of the shale gas industry in their territory to address its environmental impacts. The research is situated within a review of multiple literatures including political economy, Indigenous governance, and critical studies of natural resource governance, social conflict and co-management in Indigenous-settler contexts. Through interviews and participant observation with the Fort Nelson First Nation, the thesis documents how those involved in shale gas governance at the local level perceive existing processes, and investigates under what conditions a more localized governance might resolve shale gas conflict in northeast BC. It develops an argument that shale gas governance must be rescaled to address landscape scale impacts and enhance the authority of local First Nations interests and knowledge. While collaborative governance reforms like co-management may not wholly eliminate deeply seated colonial authority, they can be effective and empower local First Nations communities under certain conditions. However, this case poses a unique set of context-specific challenges to governance reform, which the Fort Nelson First Nation are confronting as they work towards their governance and land use goals for their traditional territory. As the Nation continues to move forward, it is uncertain how they will negotiate the non-renewable industry’s political economy, and the current pro-development shale gas politics in BC. As such, this case offers a rare lens into local community experience with this relatively new and contentious global energy industry. / Graduate
|
Page generated in 0.189 seconds