Plant macrofossils from packrat middens in two southeastern Utah caves outline development of modern plant zonation from the late Wisconsin. Allen Canyon Cave (2195 m) and Fishmouth Cave (1585 m) are located along a continuous gradient of outcropping Navajo Sandstone that extends from the Abajo Mountains south to the San Juan River. By holding the site constant, changes in the floral composition for a plot of less than one hectare can be observed, even if sporadically, over tens of millennia. At Allen Canyon Cave, engelmann spruce-alpine fir forest was replaced by the present vegetation consisting of pinyon-juniper woodland on exposed ridgetops and cliffside stands of Douglas fir, ponderosa pine, and aspen. Xerophytic woodland plants such as pinyon, Plains prickly pear, and narrowleaf yucca arrived sometime in the middle Holocene between 7200 and 3400 B.P. At Fishmouth Cave, Utah juniper in Holocene middens replaced blue spruce, limber pine, Douglas fir, and dwarf and Rocky Mountain junipers in late Wisconsin samples. Disharmonious associations for the late Wisconsin occur only at the lower site with the xerophytes Mormon tea, Plains prickly pear, and narrowleaf yucca growing alongside subalpine conifers. One possible explanation involves the late Wisconsin absence of ponderosa and pinyon pines from the Colorado Plateaus. Released from competition at their lower limits, subalpine conifers were able to expand into lower elevations and mix with xerophytic plants found today in understories of pinyon-juniper and ponderosa pine woodlands. Quantitative climatic estimates are derived for the late Wisconsin by applying vertical lapse rates for temperature and precipitation to the amount of vegetation depression. The Fishmouth Cave sequence indicates a minimum lowering of 850 m for blue spruce, limber pine, and dwarf juniper. A depression of at least 700 m for engelmann spruce and alpine fir is suggested for the Allen Canyon locality. Use of conservatively low lapse rates for stations below 2080 m yields a 3-4°C cooling from present mean annual temperature and 35 to 60 percent more rainfall than today. Steeper lapse rates associated with more mountainous terrain suggest a 5°C lowering in temperature and up to 120 percent increase over modern precipitation.

La couche de nacre de la coquille de l'huître perlière Pinctada radiata des côtes tunisiennes est considérée comme un biomatériau ostéogénique prometteur. L’objectif de ce travail intitulé « Ostéogénie, intégration et qualité de la nacre d’un bivalve des côtes tunisiennes : Pinctada radiata (Leach, 1814) » consiste dans un premier temps à valoriser l’espèce P. radiata par sa qualité nutritionnelle par un suivi saisonnier de la composition de sa chair en lipides totaux et en phospholipides particulièrement les PC, PE, PS et PI. Les analyses effectuées ont montré que les lipides de P.radiata sont caractérisés par une richesse en acides gras polyinsaturés (AGPI) de la série n-3 qui dépasse 3 fois celle des AGPI de la série n-6. Ces AGPI de la série n-3 en particulier l’EPA (C20:5n-3) et le DHA (C22:6n-3), sont connus comme étant les AG les plus importants dans l’alimentation humaine puisqu’ils préviennent des maladies cardiovasculaires et des pathologies ostéo-articulaires. Par ailleurs, P. radiata de la région de Maharès présente la meilleure qualité de nacre en Tunisie. Les analyses biochimiques ont montré que cette région, constitue la meilleure localisation de cette espèce qui est loin des zones portuaires et des différentes origines de stress (pêche, exploitation, zone touristique etc…). En plus de cet aspect, la zone de Maharès renferme des pintadines présentant une bonne qualité en termes d’épaisseur de nacre. Nos résultats montrent que la composition, saisonnière, en acide gras des phospholipides et en particulier des glycérophospholipides (PE, PI, PS et PC) de la nacre est riche en acides gras saturés C14 :0, C16 :0 et C18 :0 particulièrement en hiver et dans un moindre degré au printemps. La nacre, substance ostéogénique, a été également caractérisée par un taux élevé de plusieurs AGPI de la série n-3 et n-6, particulièrement (18:3n-3, 18:4n-3, 20:5n-3, 22:5n-3, 22:6n-3 et le 20:4n-6). Pour démontrer les potentialités ostéogéniques des extraits de la nacre, nous avons utilisé un modèle "in vitro" utilisant 4 extraits lipidiques : l’extrait lipidique de la nacre de P.radiata (Ln), l’extrait lipidique de la chair de P.radiata (Lc), l’ESM (Ethanol soluble Matrix) de la nacre de P.radiata (Br) et l’ESM de la nacre de P.margaritifera (Bm). Nous avons comparé, in vitro, le pouvoir ostéogénique des extraits ESM des deux espèces P. radiata et P. margaritifera sur deux types de cellules les préchondrocytes ATDC5 et les préostéoblastes murins MC3T3. Les différents extraits (Ln, Lc, Br et Bm) induisent l’engagement des cellules MC3T3 vers le lignage ostéoblastique par l’activation des promoteurs des gènes spécifiques du tissu osseux, tels que: le collagène de type 1, l’ostéocalcine (OC), l’ostéopontine(OP) et le Runx2. Ces extraits induisent aussi l’engagement des cellules ATDC5 vers la différenciation endochondrale par l’activation des promoteurs des gènes spécifiques du tissu osseux, tels que: le collagène de type 1 alpha-1 (Col1a1), l’Aggrécane et le collagène de type X alpha-1 (ColXA1). De plus, nous remarquons que la fraction organique ou ESMr(Br) en comparaison avec celle de P.margaritifera (Bm) présente également les propriétés stimulantes de la nacre et la stimulation est même beaucoup plus importante. Ces résultats mettent en évidence, dans les modèles expérimentaux mis en oeuvre, l’intérêt des lipides. Ces derniers semblent jouer un rôle important dans cette stimulation. De plus, nous pouvons penser à la possibilité de l’association des molécules de nacre ou de biominéralisation avec les acides gras de la nacre et de la chair dans les défauts osseux à travers les sites actifs de l’os ou du cartilage humain présentant les différentes pathologies ostéarticulaires / The nacre layer of the shell of the pearl oyster Pinctada radiata of tunisian coast is considered a promising osteogenic biomaterial. The objective of this work entitled "Osteogenie, integration and quality of nacre of a tunisian coast bivalve: Pinctada radiata (Leach, 1814)" is a first step to enhance the species P.radiata its nutritional quality by seasonal monitoring of the composition of the flesh of total lipids and phospholipids in particular PC, PE, PS and PI. The analyzes showed that lipids of P.radiata are characterized by rich in polyunsaturated fatty acids (PUFAs) of the n-3 more than 3 times that of PUFAs n-6 series. These PUFAs of the n-3 series particularly EPA (C20: 5n-3) and DHA (C22: 6n-3) are known to be the most important AG in the food as prevent of the cardiovascular disease, and joint/ bone pathologies. Moreover, P. radiata of Mahares region has the best quality of nacre in Tunisia. Biochemical analyzes showed that this region is the best location of this species that is far from the port areas and different sources of stress (fishing, exploitation, tourist area etc ...). In addition to this aspect, the area contains pintadines having good quality in terms of thickness of nacre. Our results show that the seasonal composition of fatty acid of phospholipids in particular glycerophospholipids (PE, PI, PS and PC) nacre is rich in saturated fatty acids C14: 0, C16: 0 and C18: 0 especially in winter and spring in a lesser degree. Nacre, osteogenic substance, was also characterized by a high rate of PUFA of the n-3 and n-6 rate, especially (18: 3n-3, 18: 4n-3, 20: 5n-3, 22 5n-3, 22: 6n-3 and 20: 4n-6). To demonstrate the osteogenic potential of extracts of nacre, we have established an "in vitro" model using 4 lipid extracts: the lipid extract of nacre P.radiata (Ln); the lipid extract of the flesh of P.radiata (Lc), ESM (Ethanol soluble Matrix) of the mother-of P.radiata (Br) and ESM nacre of P. margaritifera (Bm). We compared “in vitro” osteogenic power ESM extracts of both species P. radiata and P. margaritifera on two types of cells the préchondrocytes ATDC5 and the murine preosteoblasts MC3T3. The different extracts (Ln, Lc, Br and Bm) induce engagement MC3T3 osteoblast lineage cells to the activation of the promoters of specific genes of bone tissue, such as collagen type 1, osteocalcin (OC), osteopontin (OP) and Runx2. These extracts also induce the commitment of ATDC5 cells to endochondral differentiation by activating specific genes promoters of bone tissue, such as collagen type 1 alpha 1 (COL1A1), the aggrecan and collagen type alpha 1-X (ColXA1). Moreover, we note that the organic fraction or ESMR (Br) compared with that of P. margaritifera (Bm) also has stimulant properties of nacre and the stimulation is even more important. These results demonstrate, in experimental models used, the interest of lipids. They seem to play an important role in this stimulation. Moreover, we can think about the possibility of the association of molecules or nacre biomineralization with the fatty acids of the nacre and flesh in bone defects through the active sites of bone or cartilage presenting the human osteoarticular different pathologies

Approximately 75 percent (300 000 km) of the total Swedish road network and 20 percent(20 000 km) of the national road network consists of gravel roads. One of the most significantproblems associated with gravel roads is traffic-generated dust emission, which contributes tothe deterioration of the road surface and acts as a major source of particulate matter releasedinto the atmosphere, thereby involving public economics, road safety, human health, andenvironmental quality. In order to bind the fine granular material, which is prone to rise into theair, dust suppressants are applied on roads on a yearly basis. Methods for evaluating the efficiency of dust suppressants will facilitate in the selection of themost appropriate product and its optimal application rate. For example, methods forsupervision of residual dust suppressant concentration are valuable tools for estimatinglongevity and optimal application rates, and, consequently, effectiveness of different products. Application of the proper dust suppressant to a gravel road ensures road safety and ridingcomfort as well as creating a cleaner and healthier environment for residents in buildingsadjacent to the road. It also reduces the need and cost for vehicle repair, road maintenanceactivities, and aggregate supplementation. Both field-based and laboratory research were performed to evaluate the efficiency of varioussuppressants and the influence such factors as product concentration, leaching, and fine materialcontent have on the efficiency of different products. Within the field-based research, a newlydeveloped mobile methodology was used to measure dust emission on numerous test sectionstreated with various dust suppressants. In general, all dust suppressants tested, except apolysaccharide (sugar) and products, which form a brittle surface crust, i.e. lignosulphonate andbitumen emulsion, showed acceptable dust reduction. Test sections treated with a magnesium- or calcium chloride solution were the most effectivelydust suppressed. The application of solutions instead of a solid salts achieves a more uniformproduct distribution and, therefore, probably a more efficient performance. By applying acalcium- or magnesium chloride solution instead of traditionally used solids, the cost for annualdust control, as well as the environmental impact from the release of these chemicals in theenvironment, can be reduced by 50 percent. A significant problem when using dust suppressants is their tendency to leach during rainfalldue to their soluble properties. Residual chloride could be detected in the gravel wearing courseover a longer period of time than lignosulphonate and, therefore, showed more effective longtermperformance. Optimal percentages of fine material for minimal lignosulphonate andchloride leaching were found to be 15 percent by weight and 10-16 percent by weight,respectively. Ions of calcium chloride seemed to initiate flocculation of clay particles, therebypreventing them from leaching. Still, the fine material in gravel wearing courses has to be replenished regularly as indicated by studies of the longevity of fine material. Loss up to80 percent was found after two years. Toxicity tests show that dust suppressant application for dust control purposes, at traditionallyused application rates, does not constitute a threat to sensitive aquatic life. Tests on subsoilwater samples indicated elevated chloride levels, which possibly could cause corrosion to pipes,but not high enough to flavour drinking water. / QC20100616