No description available.

Due to a globally aging population, there is a growing demand for smart home technology which can serve to monitor the health and safety of adults. Therefore, sleep monitoring has emerged as a crucial tool to improve the health and autonomy of adults. While polysomnography (PSG) is an effective and accurate tool for sleep monitoring, it is obtrusive as the user must wear the instruments during the experiment. Therefore, there has been a growing interest in deploying unobtrusive sleep monitoring devices, specifically for long-term patient monitoring. This thesis proposes multiple algorithms applicable to unobtrusive pressure sensitive sensor arrays in order to assess sleep quality. These algorithms can be listed as adaptive movement detection, sensor data fusion and bed occupancy detection. This thesis also investigates long-term sleep pattern changes from previously recorded data. The methods developed in the thesis can be of interest for future clinical remote patient monitoring systems.

Methods to improve performance of sensors with regard to sensor nonlinearity, sensor noise and sensor bandwidths are investigated and new algorithms are developed. The necessity of the proposed research has evolved from the ever-increasing need for greater precision and improved reliability in sensor measurements. After describing the current state of the art of sensor related issues like nonlinearity and bandwidth, research goals are set to create a new trend on the usage of sensors. We begin the investigation with a detailed distortion analysis of nonlinear sensors. A need for efficient distortion compensation procedures is further justified by showing how a slight deviation from the linearity assumption leads to a very severe distortion in time and in frequency domains. It is argued that with a suitable distortion compensation technique the danger of having an infinite bandwidth nonlinear sensory operation, which is dictated by nonlinear distortion, can be avoided. Several distortion compensation techniques are developed and their performance is validated by simulation and experimental results. Like any other model-based technique, modeling errors or model uncertainty affects performance of the proposed scheme, this leads to the innovation of robust signal reconstruction. A treatment for this problem is given and a novel technique, which uses a nominal model instead of an accurate model and produces the results that are robust to model uncertainty, is developed. The means to attain a high operating bandwidth are developed by utilizing several low bandwidth pass-band sensors. It is pointed out that instead of using a single sensor to measure a high bandwidth signal, there are many advantages of using an array of several pass-band sensors. Having shown that employment of sensor arrays is an economic incentive and practical, several multi-sensor fusion schemes are developed to facilitate their implementation. Another aspect of this dissertation is to develop means to deal with outliers in sensor measurements. As fault sensor data detection is an essential element of multi-sensor network implementation, which is used to improve system reliability and robustness, several sensor scheduling configurations are derived to identify and to remove outliers.

This dissertation describes the fabrication and operation of porous silicon gas sensors. The first chapter describes the motivation behind gas sensor research and provides the reader with background knowledge of gas sensors including the terminology and a review of various gas sensors. The following two chapters describe both how the porous silicon gas sensors are created and how they have been tested in the laboratory. Chapter 4 describes the steps required to create arrays of gas sensors to provide for a selective device through the application of patented selective coatings. Chapter 5 proposes a physical model that leads to a numerical solution for predicting the operation of the gas sensor. The next chapter builds from this model to analyze and optimize the experimental methods that are used to test both this and other gas sensors. The final chapter of this dissertation describes the prototype gas sensor system that has most recently been created, the company that was formed to further the development of that system, and the future applications of the porous silicon gas sensor.

Methods to improve performance of sensors with regard to sensor nonlinearity, sensor noise and sensor bandwidths are investigated and new algorithms are developed. The necessity of the proposed research has evolved from the ever-increasing need for greater precision and improved reliability in sensor measurements. After describing the current state of the art of sensor related issues like nonlinearity and bandwidth, research goals are set to create a new trend on the usage of sensors. We begin the investigation with a detailed distortion analysis of nonlinear sensors. A need for efficient distortion compensation procedures is further justified by showing how a slight deviation from the linearity assumption leads to a very severe distortion in time and in frequency domains. It is argued that with a suitable distortion compensation technique the danger of having an infinite bandwidth nonlinear sensory operation, which is dictated by nonlinear distortion, can be avoided. Several distortion compensation techniques are developed and their performance is validated by simulation and experimental results. Like any other model-based technique, modeling errors or model uncertainty affects performance of the proposed scheme, this leads to the innovation of robust signal reconstruction. A treatment for this problem is given and a novel technique, which uses a nominal model instead of an accurate model and produces the results that are robust to model uncertainty, is developed. The means to attain a high operating bandwidth are developed by utilizing several low bandwidth pass-band sensors. It is pointed out that instead of using a single sensor to measure a high bandwidth signal, there are many advantages of using an array of several pass-band sensors. Having shown that employment of sensor arrays is an economic incentive and practical, several multi-sensor fusion schemes are developed to facilitate their implementation. Another aspect of this dissertation is to develop means to deal with outliers in sensor measurements. As fault sensor data detection is an essential element of multi-sensor network implementation, which is used to improve system reliability and robustness, several sensor scheduling configurations are derived to identify and to remove outliers.

No description available.

No description available.

No description available.

No description available.

The main goal of this project, running at Neurofy AB, was that developing an AI recognition algorithm also known as, gas sensing algorithm or simply recognition algorithm, based on Artificial Intelligence (AI) technology, which would have the ability to detect or predict diary cattle diseases using odor signal data gathered, measured and provided by Gas Sensor Array (GSA) also known as, Electronic Nose or simply E-nose developed by the company. Two major challenges in this project were to first overcome the noises and errors in the odor signal data, as the E-nose is supposed to be used in an environment with difference conditions than laboratory, for instance, in a bail (A stall for milking cows) with varying humidity and temperatures, and second to find a proper feature extraction method appropriate for GSA. Normalization and Principal component analysis (PCA) are two classic methods which not only intended for re-scaling and reducing of features in a data-set at pre-processing phase of developing of odor identification algorithm, but also it thought that these methods reduce the affect of noises in odor signal data. Applying classic approaches, like PCA, for feature extraction and dimesionality reduction gave rise to loss of valuable data which made it difficult for classification of odors. A new method was developed to handle noises in the odors signal data and also deal with dimentionality reduction without loosing of valuable data, instead of the PCA method in feature extraction stage. This method, which is consisting of signal segmentation and Autoencoder with encoder-decoder, made it possible to overcome the noise issues in data-sets and it also is more appropriate feature extraction method due to better prediction accuracy performed by the AI gas recognition algorithm in comparison to PCA. For evaluating of Autoencoder monitoring of its learning rate of was performed. For classification and predicting of odors, several classifier, among alias, Logistic Regression (LR), Support vector machine (SVM), Linear Discriminant Analysis (LDA), Random forest Classifier (RFC) and MultiLayer perceptron (MLP), was investigated. The best prediction was obtained by classifiers MLP . To validate the prediction, obtained by the new AI recognition algorithm, several validation methods like Cross validation, Accuracy score, balanced accuracy score , precision score, Recall score, and Learning Curve, were performed. This new AI recognition algorithm has the ability to diagnose 3 different diary cattle diseases with an accuracy of 96% despite lack of samples. / Syftet med detta projekt var att utveckla en igenkänning algoritm baserad på maskinintelligens (Artificiell intelligens (AI) ), även känd som gasavkänning algoritm eller igenkänningsalgoritm, baserad på artificiell intelligens (AI) teknologi såsom maskininlärning ach djupinlärning, som skulle kunna upptäcka eller diagnosera vissa mjölkkor sjukdomar med hjälp av luktsignaldata som samlats in, mätts och tillhandahållits av Gas Sensor Array (GSA), även känd som elektronisk näsa eller helt enkelt E-näsa, utvecklad av företaget Neorofy AB. Två stora utmaningar i detta projekt bearbetades. Första utmaning var att övervinna eller minska effekten av brus i signaler samt fel (error) i dess data då E-näsan är tänkt att användas i en miljö där till skillnad från laboratorium förekommer brus, till example i ett stall avsett för mjölkkor, i form av varierande fukthalt och temperatur. Andra utmaning var att hitta rätt dimensionalitetsreduktion som är anpassad till GSA. Normalisering och Principal component analysis (PCA) är två klassiska metoder som används till att både konvertera olika stora datavärden i datamängd (data-set) till samma skala och dimensionalitetsminskning av datamängd (data-set), under förbehandling process av utvecling av luktidentifieringsalgoritms. Dessa metoder används även för minskning eller eliminering av brus i luktsignaldata (odor signal data). Tillämpning av klassiska dimensionalitetsminskning algoritmer, såsom PCA, orsakade förlust av värdefulla informationer som var viktiga för kllasifisering. Den nya metoden som har utvecklats för hantering av brus i luktsignaldata samt dimensionalitetsminskning, utan att förlora värdefull data, är signalsegmentering och Autoencoder. Detta tillvägagångssätt har gjort det möjligt att övervinna brusproblemen i datamängder samt det visade sig att denna metod är lämpligare metod för dimensionalitetsminskning jämfört med PCA. För utvärdering of Autoencoder övervakning of inlärningshastighet av Autoencoder tillämpades. För klassificering, flera klassificerare, bland annat, LogisticRegression (LR), Support vector machine (SVM) , Linear Discriminant Analysis (LDA), Random forest Classifier (RFC) och MultiLayer perceptron (MLP) undersöktes. Bästa resultate erhölls av klassificeraren MLP. Flera valideringsmetoder såsom, Cross-validering, Precision score, balanced accuracy score samt inlärningskurva tillämpades. Denna nya AI gas igenkänningsalgoritm har förmågan att diagnosera tre olika mjölkkor sjukdomar med en noggrannhet på högre än 96%.