Spelling suggestions: "subject:"simulationlation - 2models."" "subject:"simulationlation - 3dmodels.""
121 |
Simulační modely penzijního připojištění vzhledem k demografickému vývoji v ČR / Simulation models of pension insurance due to demographic development in the CRPudil, Lubomír January 2008 (has links)
The issue of an aging population, pension systems and pension themselves, are currently very actual, interesting and socially topics discussed. In my diploma thesis on simulation models of pension insurance due to demographic development in the CR I used simulation experiments, including those based primarily on the Monte Carlo method, tackling issues and negatives surrounding pension insurance with state contribution, which, as one of the financial products market, is the second pillar of pension system in the Czech Republic. Pension scheme of pension insurekce with state contibution gives participants the advantages and benefits in the form of state subsidy, the possibility of reducing the income tax base on the part of the contributions paid, proceeds from fund management and the possibility of contributions from the employer. On the other hand, play an important role, weaknesses and shortcomings of this system. Again, the most important may be considered inseparateness fund's assets from an estate participants, inappropriately designed state contribution, the high average age of participants and relatively low rate of return on fund management. Negatives mentioned above were reflected in the simulation experiments, when the linear state contribution was designed and was considered for the new system of pension saving in combination with a linear state contribution, which appears to be a more appropriate and beneficial for both participants on the one hand, and the state (impact on public spendings) on the other.
|
122 |
Simulátor dopravy na pozemních komunikacích / City Traffic SimulationŠvéda, Pavel January 2010 (has links)
This Master's Thesis deals with the possibilities for the practical usage of traffic simulations as tools for seeking solutions to various kinds of problems such as road traffic flow, the environmental impact of traffic, etc. It contains a description of the basic terms in the area of traffic simulation models, advantages of their practical usage, and furthermore, it describes the basic general methods of and attitudes to the most commonly used traffic simulations. In the second part, the analysis and the design of an original micro traffic simulator are included. Finally, the traffic simulator is implemented and tested on a real traffic situation.
|
123 |
Modeling and Simulation of Electricity Consumption Profiles in the Northern European Building StockSandels, Claes January 2016 (has links)
The electric power systems are currently being transformed through the integration of intermittent renewable energy resources and new types of electric loads. These developments run the risk of increasing mismatches between electricity supply and demand, and may cause non-favorable utilization rates of some power system components. Using Demand Response (DR) from flexible loads in the building stock is a promising solution to overcome these challenges for electricity market actors. However, as DR is not used at a large scale today, there are validity concerns regarding its cost-benefit and reliability when compared to traditional investment options in the power sector, e.g. network refurbishment. To analyze the potential in DR solutions, bottom-up simulation models which capture consumption processes in buildings is an alternative. These models must be simple enough to allow aggregations of buildings to be instantiated and at the same time intricate enough to include variations in individual behaviors of end-users. This is done so the electricity market actor can analyze how large volumes of flexibility acts in various market and power system operation contexts, but also can appreciate how individual end-users are affected by DR actions in terms of cost and comfort. The contribution of this thesis is bottom-up simulation models for generating load profiles in detached houses and office buildings. The models connect end-user behavior with the usage of appliances and hot water loads through non-homogenous Markov chains, along with physical modeling of the indoor environment and consumption of heating and cooling loads through lumped capacitance models. The modeling is based on a simplified approach where openly available data and statistics are used, i.e. data that is subject to privacy limitations, such as smart meter measurements are excluded. The models have been validated using real load data from detached houses and office buildings, related models in literature, along with energy-use statistics from national databases. The validation shows that the modeling approach is sound and can provide reasonably accurate load profiles as the error results are in alignment with related models from other research groups. This thesis is a composite thesis of five papers. Paper 1 presents a bottom-up simulation model to generate load profiles from space heating, hot water and appliances in detached houses. Paper 2 presents a data analytic framework for analyzing electricity-use from heating ventilation and air conditioning (HVAC) loads and appliance loads in an office building. Paper 3 presents a non-homogeneous Markov chain model to simulate representative occupancy profiles in single office rooms. Paper 4 utilizes the results in paper 2 and 3 to describe a bottom-up simulation model that generates load profiles in office buildings including HVAC loads and appliances. Paper 5 uses the model in paper 1 to analyze the technical feasibility of using DR to solve congestion problems in a distribution grid. / Integrering av förnybara energikällor och nya typer av laster i de elektriska energisystemen är möjliga svar till klimatförändringar och uttömning av ändliga naturresurser. Denna integration kan dock öka obalanserna mellan utbud och efterfrågan av elektricitet, och orsaka en ogynnsam utnyttjandegrad av vissa kraftsystemkomponenter. Att använda efterfrågeflexibilitet (Demand Response) i byggnadsbeståndet är en möjlig lösning till dessa problem för olika elmarknadsaktörer. Men eftersom efterfrågeflexibilitet inte används i stor skala idag finns det obesvarade frågor gällande lösningens kostnadsnytta och tillförlitlighet jämfört med traditionella investeringsalternativ i kraftsektorn. För att analysera efterfrågeflexibilitetslösningar är botten-upp-simuleringsmodeller som fångar elförbrukningsprocesser i byggnaderna ett alternativ. Dessa modeller måste vara enkla nog för att kunna representera aggregeringar av många byggnader men samtidigt tillräckligt komplicerade för att kunna inkludera unika slutanvändarbeteenden. Detta är nödvändigt när elmarknadsaktören vill analysera hur stora volymer efterfrågeflexibilitet påverkar elmarknaden och kraftsystemen, men samtidigt förstå hur styrningen inverkar på den enskilda slutanvändaren. Bidraget från denna avhandling är botten-upp-simuleringsmodeller för generering av elförbrukningsprofiler i småhus och kontorsbyggnader. Modellerna kopplar slutanvändarbeteende med elförbrukning från apparater och varmvattenanvändning tillsammans med fysikaliska modeller av värmedynamiken i byggnaderna. Modellerna är byggda på en förenklad approach som använder öppen data och statistisk, där data som har integritetsproblem har exkluderats. Simuleringsresultat har validerats mot elförbrukningsdata från småhus och kontorsbyggnader, relaterade modeller från andra forskargrupper samt energistatistik från nationella databaser. Valideringen visar att modellerna kan generera elförbrukningsprofiler med rimlig noggrannhet. Denna avhandling är en sammanläggningsavhandling bestående av fem artiklar. Artikel 1 presenterar botten-upp-simuleringsmodellen för genereringen av elförbrukningsprofiler från uppvärmning, varmvatten och apparater i småhus. Artikel 2 presenterar ett dataanalytiskt ramverk för analys av elanvändningen från uppvärmning, ventilation, och luftkonditioneringslaster (HVAC) och apparatlaster i en kontorsbyggnad. Artikel 3 presenterar en icke-homogen Markovkedjemodell för simulering av representativa närvaroprofiler i enskilda kontorsrum. Artikel 4 använder resultaten i artiklarna 2 och 3 för att beskriva en botten-upp-simuleringsmodell för generering av elförbrukningsprofiler från HVAC-laster och apparater i kontorsbyggnader. Artikel 5 använder modellen i artikel 1 för att analysera den tekniska möjligheten att använda efterfrågeflexibilitet för att lösa överbelastningsproblem i ett eldistributionsnät. / <p>QC 20160329</p>
|
124 |
Entwicklung und Evaluierung von Clinical Skills - Simulatoren für die Lehre in der TiermedizinAulmann, Maria 05 December 2016 (has links) (PDF)
Einleitung
Studierende der Veterinärmedizin müssen neben umfangreichem theoretischem Wissen zahlreiche praktische Fertigkeiten erlernen. Da jeder Einzelne in seinem eigenen Tempo lernt, besteht ein großer Bedarf an Trainingsmöglichkeiten. Kadaver und lebende Tiere sind selten in ausreichender Menge verfügbar und lebende Tiere sind zudem aus Gründen des Tierwohls nur eingeschränkt zu verwenden. Simulationsmodelle (Modelle von Organismen / Körperteilen) können hier Abhilfe schaffen. Kommerziell erhältliche Modelle sind sehr kostenintensiv und für die Tiermedizin noch nicht flächendeckend erhältlich. Zunehmend werden selbst entwickelte low-fidelity Modelle in der Tiermedizin verwendet. Aufgrund des Mangels an publizierten Daten zu ihrem Einsatz besteht intensiver Forschungsbedarf.
Ziele der Untersuchungen
In dieser Arbeit sollte untersucht werden, ob einfache, selbst entwickelte Simulationsmodelle (low-fidelity Modelle) erfolgreich in der Lehre eingesetzt werden können. Dazu wurden zwei selbst entwickelte und gebaute Simulationsmodelle evaluiert (Studie 1) und ihr Einsatz in Kombination mit anderen Lehrmedien untersucht (Studie 2).
Materialien und Methoden
In Studie 1 wurden zwei low-fidelity Modelle zur kaninen Intubation und Katheterisierung entwickelt und evaluiert. Es wurde ein Studiendesign genutzt, das die erworbenen Fertigkeiten zweier Übungsgruppen und einer Kontrollgruppe in einer praktischen Prüfung (OSCE = objective structured clinical examination) am toten Hund vergleicht. Achtundfünfzig Studierende (4. FS) erhielten eine theoretische Einführung zur Intubation und wurden randomisiert auf drei Gruppen aufgeteilt. Gruppe 1 (high-fidelity) übte am kommerziell erhältlichen Intubation Training Manikin, Gruppe 2 (low-fidelity) am entwickelten low-fidelity Modell und die Textgruppe las einen Text, der die Intubation beim Hund beschreibt. Siebenundvierzig Studierende (10. FS) durchliefen dasselbe Studiendesign zum Thema Katheterisierung der Hündin. Sie nutzten das kommerziell erhältliche Female Urinary Catheter Training Manikin, das selbst entwickelte low-fidelity Modell und Lehrtexte.
In Studie 2 wurde die Vermittlung zweier spezifischer Fertigkeiten mit Hilfe von Potcasts und Simulationstraining evaluiert. Zwei anleitende Potcasts zu Intubation und Katheterisierung und die oben beschriebenen Modelle wurden innerhalb eines crossover-Studiendesigns genutzt. In dieser Studie sind Potcasts audio-visuell aufbereitete Animationen mit Schritt für Schritt – Anleitungen und Informationen. Die erworbenen praktischen Fertigkeiten zweier Übungsgruppen, die sich in der Art der theoretischen Vorbereitung unterschieden, wurden in einer praktischen Prüfung (OSCE) am toten Hund verglichen. Ein Fragebogen erfasste das Feedback der Teilnehmer. Sechzig Studierende (2. FS) wurden randomisiert auf eine Potcast- und eine Textgruppe aufgeteilt. Die Potcastgruppe sah sich das anleitende Potcast an, die Textgruppe bereitete sich anhand eines Lehrtextes vor. Im Anschluss hatten beide Gruppen separate Übungseinheiten an den low-fidelity Modellen ohne Betreuung durch Lehrende.
Ergebnisse
In Studie 1 schnitten alle Übungsgruppen signifikant besser ab als die Textgruppen. Gruppe 1 (high-fidelity) und Gruppe 2 (low-fidelity) unterschieden sich weder bei der Intubation noch bei der Katheterisierung signifikant in ihren Leistungen. In Studie 2 schnitt die Potcastgruppe beim Thema Intubation signifikant besser ab als die Textgruppe, beim Thema Katheterisierung ergaben sich keine signifikanten Unterschiede. Insgesamt hatte das Simulationstraining den Studierenden Spaß gemacht, das Lernen ohne Betreuer wurde jedoch als Herausforderung empfunden.
Schlussfolgerungen
Es ist davon auszugehen, dass low-fidelity Modelle genauso geeignet für das Training klinischer Fertigkeiten sein können wie high-fidelity Modelle. Das Training klinischer Fertigkeiten mit Hilfe von Potcasts und low-fidelity Modellen sollte durch Betreuer ergänzt werden, anstatt als alleiniges Lehrmedium für Studierende des ersten Studienjahres Verwendung zu finden. Eigenständiges Lernen klinischer Fertigkeiten, angeleitet durch Potcasts bietet eine Möglichkeit für vertiefendes und wiederholendes Training höherer Semester. Der Einsatz von Simulationsmodellen in der veterinärmedizinischen Ausbildung wächst seit wenigen Jahren stetig. Diese Arbeit leistet einen zeitgerechten Beitrag bei der Evaluierung von Simulationstraining. / Introduction
Students of veterinary medicine are expected to acquire various practical skills in addition to a wide range of theoretical knowledge. There is a strong demand for training opportunities, as every individual learns and acquires practical skills at individual pace. For reasons of animal welfare concerns and availability, live animals and cadavers cannot always be used for clinical skills training. Simulation models, which are models of organisms or body parts can be a considerable alternative for clinical skills training. Models that are commercially produced often have a high price and are not available for all skills. Self-made models are increasingly used in veterinary education. Because there is few published data regarding their use, more scientific research is required.
Aims of the Investigation
The objective of this study was to determine, if self-made low-fidelity models can be successfully used in veterinary medical education. For this purpose, two self-made low-fidelity models were evaluated (study 1) and their use in combination with other teaching tools was analyzed (study 2).
Materials and Methods
In study 1, two self-made low-fidelity models for simulation of canine intubation and canine female urinary catheterization were developed and evaluated. We used a study design that compares acquired skills of two intervention groups and one control group in a practical examination (OSCE = objective structured clinical examination). Fifty-eight second-year veterinary medicine students received a theoretical introduction to intubation and were randomly divided into three groups. Group 1 (high-fidelity) was then trained on a commercially available Intubation Training Manikin, group 2 (low-fidelity) was trained on our low-fidelity model, and the text group read a text describing intubation of the dog. Forty-seven fifth-year veterinary medicine students followed the same procedure for training urinary catheterization using the commercially available Female Urinary Catheter Training Manikin, our self-made model, and text. Outcomes were assessed in a practical examination on a cadaver using an OSCE checklist. In study 2 we evaluated the teaching of two specific clinical skills using potcasts and low-fidelity simulation training. Two instructional potcasts describing intubation and catheterization and both low-fidelity models described above were used. In our study, potcasts are audio-visual animations that provide the learner with step by step information and instruction on a clinical skill. We used a crossover study design and compared the acquired practical skills of two intervention groups after a different theoretical preparation. A survey captured the participants’ feedback. Sixty first year veterinary medicine students were randomly allocated to two groups, a potcast group and a text group. The potcast group watched a potcast while the text group read an instructional text for preparation. Then both groups had separate self-directed training sessions on low-fidelity models. Outcomes were assessed in practical examinations on a cadaver using an objective structured clinical examination (OSCE) checklist.
Results
In study 1 all intervention groups performed significantly better than the text groups. Group I (high-fidelity) and group II (low-fidelity) for both intubation and catheterization showed no significant differences. In study 2 the potcast group performed significantly better than the text group in study intubation but no significant differences were observed in study catheterization. Overall, participants enjoyed clinical skills training but experienced self-directed learning as challenging.
Conclusion
Low-fidelity models can be as effective as high-fidelity models for clinical skills training. Clinical skills training using potcasts and self-directed low-fidelity simulation training should be complemented by supervisor or peer instruction rather than used as exclusive tool for teaching first year veterinary students. We assume though, that self-directed learning instructed by our potcasts can be a valuable chance for deepening and repetitive training of higher semesters. The use of simulation models in veterinary education has been consistently increasing in the past few years. This study is an important, timely contribution to the evaluation of simulation based education.
|
125 |
Entwicklung und Evaluierung von Clinical Skills - Simulatoren für die Lehre in der TiermedizinAulmann, Maria 20 September 2016 (has links)
Einleitung
Studierende der Veterinärmedizin müssen neben umfangreichem theoretischem Wissen zahlreiche praktische Fertigkeiten erlernen. Da jeder Einzelne in seinem eigenen Tempo lernt, besteht ein großer Bedarf an Trainingsmöglichkeiten. Kadaver und lebende Tiere sind selten in ausreichender Menge verfügbar und lebende Tiere sind zudem aus Gründen des Tierwohls nur eingeschränkt zu verwenden. Simulationsmodelle (Modelle von Organismen / Körperteilen) können hier Abhilfe schaffen. Kommerziell erhältliche Modelle sind sehr kostenintensiv und für die Tiermedizin noch nicht flächendeckend erhältlich. Zunehmend werden selbst entwickelte low-fidelity Modelle in der Tiermedizin verwendet. Aufgrund des Mangels an publizierten Daten zu ihrem Einsatz besteht intensiver Forschungsbedarf.
Ziele der Untersuchungen
In dieser Arbeit sollte untersucht werden, ob einfache, selbst entwickelte Simulationsmodelle (low-fidelity Modelle) erfolgreich in der Lehre eingesetzt werden können. Dazu wurden zwei selbst entwickelte und gebaute Simulationsmodelle evaluiert (Studie 1) und ihr Einsatz in Kombination mit anderen Lehrmedien untersucht (Studie 2).
Materialien und Methoden
In Studie 1 wurden zwei low-fidelity Modelle zur kaninen Intubation und Katheterisierung entwickelt und evaluiert. Es wurde ein Studiendesign genutzt, das die erworbenen Fertigkeiten zweier Übungsgruppen und einer Kontrollgruppe in einer praktischen Prüfung (OSCE = objective structured clinical examination) am toten Hund vergleicht. Achtundfünfzig Studierende (4. FS) erhielten eine theoretische Einführung zur Intubation und wurden randomisiert auf drei Gruppen aufgeteilt. Gruppe 1 (high-fidelity) übte am kommerziell erhältlichen Intubation Training Manikin, Gruppe 2 (low-fidelity) am entwickelten low-fidelity Modell und die Textgruppe las einen Text, der die Intubation beim Hund beschreibt. Siebenundvierzig Studierende (10. FS) durchliefen dasselbe Studiendesign zum Thema Katheterisierung der Hündin. Sie nutzten das kommerziell erhältliche Female Urinary Catheter Training Manikin, das selbst entwickelte low-fidelity Modell und Lehrtexte.
In Studie 2 wurde die Vermittlung zweier spezifischer Fertigkeiten mit Hilfe von Potcasts und Simulationstraining evaluiert. Zwei anleitende Potcasts zu Intubation und Katheterisierung und die oben beschriebenen Modelle wurden innerhalb eines crossover-Studiendesigns genutzt. In dieser Studie sind Potcasts audio-visuell aufbereitete Animationen mit Schritt für Schritt – Anleitungen und Informationen. Die erworbenen praktischen Fertigkeiten zweier Übungsgruppen, die sich in der Art der theoretischen Vorbereitung unterschieden, wurden in einer praktischen Prüfung (OSCE) am toten Hund verglichen. Ein Fragebogen erfasste das Feedback der Teilnehmer. Sechzig Studierende (2. FS) wurden randomisiert auf eine Potcast- und eine Textgruppe aufgeteilt. Die Potcastgruppe sah sich das anleitende Potcast an, die Textgruppe bereitete sich anhand eines Lehrtextes vor. Im Anschluss hatten beide Gruppen separate Übungseinheiten an den low-fidelity Modellen ohne Betreuung durch Lehrende.
Ergebnisse
In Studie 1 schnitten alle Übungsgruppen signifikant besser ab als die Textgruppen. Gruppe 1 (high-fidelity) und Gruppe 2 (low-fidelity) unterschieden sich weder bei der Intubation noch bei der Katheterisierung signifikant in ihren Leistungen. In Studie 2 schnitt die Potcastgruppe beim Thema Intubation signifikant besser ab als die Textgruppe, beim Thema Katheterisierung ergaben sich keine signifikanten Unterschiede. Insgesamt hatte das Simulationstraining den Studierenden Spaß gemacht, das Lernen ohne Betreuer wurde jedoch als Herausforderung empfunden.
Schlussfolgerungen
Es ist davon auszugehen, dass low-fidelity Modelle genauso geeignet für das Training klinischer Fertigkeiten sein können wie high-fidelity Modelle. Das Training klinischer Fertigkeiten mit Hilfe von Potcasts und low-fidelity Modellen sollte durch Betreuer ergänzt werden, anstatt als alleiniges Lehrmedium für Studierende des ersten Studienjahres Verwendung zu finden. Eigenständiges Lernen klinischer Fertigkeiten, angeleitet durch Potcasts bietet eine Möglichkeit für vertiefendes und wiederholendes Training höherer Semester. Der Einsatz von Simulationsmodellen in der veterinärmedizinischen Ausbildung wächst seit wenigen Jahren stetig. Diese Arbeit leistet einen zeitgerechten Beitrag bei der Evaluierung von Simulationstraining. / Introduction
Students of veterinary medicine are expected to acquire various practical skills in addition to a wide range of theoretical knowledge. There is a strong demand for training opportunities, as every individual learns and acquires practical skills at individual pace. For reasons of animal welfare concerns and availability, live animals and cadavers cannot always be used for clinical skills training. Simulation models, which are models of organisms or body parts can be a considerable alternative for clinical skills training. Models that are commercially produced often have a high price and are not available for all skills. Self-made models are increasingly used in veterinary education. Because there is few published data regarding their use, more scientific research is required.
Aims of the Investigation
The objective of this study was to determine, if self-made low-fidelity models can be successfully used in veterinary medical education. For this purpose, two self-made low-fidelity models were evaluated (study 1) and their use in combination with other teaching tools was analyzed (study 2).
Materials and Methods
In study 1, two self-made low-fidelity models for simulation of canine intubation and canine female urinary catheterization were developed and evaluated. We used a study design that compares acquired skills of two intervention groups and one control group in a practical examination (OSCE = objective structured clinical examination). Fifty-eight second-year veterinary medicine students received a theoretical introduction to intubation and were randomly divided into three groups. Group 1 (high-fidelity) was then trained on a commercially available Intubation Training Manikin, group 2 (low-fidelity) was trained on our low-fidelity model, and the text group read a text describing intubation of the dog. Forty-seven fifth-year veterinary medicine students followed the same procedure for training urinary catheterization using the commercially available Female Urinary Catheter Training Manikin, our self-made model, and text. Outcomes were assessed in a practical examination on a cadaver using an OSCE checklist. In study 2 we evaluated the teaching of two specific clinical skills using potcasts and low-fidelity simulation training. Two instructional potcasts describing intubation and catheterization and both low-fidelity models described above were used. In our study, potcasts are audio-visual animations that provide the learner with step by step information and instruction on a clinical skill. We used a crossover study design and compared the acquired practical skills of two intervention groups after a different theoretical preparation. A survey captured the participants’ feedback. Sixty first year veterinary medicine students were randomly allocated to two groups, a potcast group and a text group. The potcast group watched a potcast while the text group read an instructional text for preparation. Then both groups had separate self-directed training sessions on low-fidelity models. Outcomes were assessed in practical examinations on a cadaver using an objective structured clinical examination (OSCE) checklist.
Results
In study 1 all intervention groups performed significantly better than the text groups. Group I (high-fidelity) and group II (low-fidelity) for both intubation and catheterization showed no significant differences. In study 2 the potcast group performed significantly better than the text group in study intubation but no significant differences were observed in study catheterization. Overall, participants enjoyed clinical skills training but experienced self-directed learning as challenging.
Conclusion
Low-fidelity models can be as effective as high-fidelity models for clinical skills training. Clinical skills training using potcasts and self-directed low-fidelity simulation training should be complemented by supervisor or peer instruction rather than used as exclusive tool for teaching first year veterinary students. We assume though, that self-directed learning instructed by our potcasts can be a valuable chance for deepening and repetitive training of higher semesters. The use of simulation models in veterinary education has been consistently increasing in the past few years. This study is an important, timely contribution to the evaluation of simulation based education.
|
126 |
Improving Climate Control and Energy Performance in Greenhouses and Livestock Houses: Modelling Advances and Experimental ResultsCostantino, Andrea 16 December 2021 (has links)
[IT] Importanti cambiamenti sociodemografici, come la crescita della popolazione
mondiale e l’urbanizzazione, stanno incrementando il fabbisogno di alimenti a
livello mondiale. In contemporanea si sta assistendo ad una profonda
trasformazione della dieta umana che tende sempre più a prediligere prodotti di
origine animale, frutta e verdura al posto dei cereali. In quest’ottica, serre e stalle
per l’allevamento intensivo possono ricoprire un ruolo di spicco, in quanto in grado
di produrre tali alimenti con dei rendimenti decisamente maggiori rispetto a quelli
che caratterizzano la produzione di vegetali in campo aperto e l’allevamento
estensivo. Tra i vari fattori che contribuiscono ad incrementare la produttività di
questi edifici agricoli vi è il controllo delle condizioni climatiche interne. Tale
controllo del clima interno avviene, in molti casi, attraverso sistemi meccanici il cui
utilizzo causa un considerevole consumo energetico che costituisce una minaccia
per la transizione verso un’agricoltura più sostenibile. L’obiettivo generale di
questa tesi è, quindi, di contribuire alla transizione verso un’agricoltura più
sostenibile attraverso il miglioramento della prestazione energetica per il controllo
climatico di serre e stalle per l’allevamento intensivo.
Per raggiungere tale obiettivo, è stato adottato un triplice approccio basato su
un’analisi di letteratura, campagne sperimentali di monitoraggio ed attività di
modellazione energetica. L’analisi di letteratura è stata svolta con il fine di
districare la complessa rete di relazioni esistente tra controllo climatico e altri
domini di interesse della produzione agricola. Il nesso tra prestazione energetica e
controllo climatico è stato approfondito analizzando dei set di dati reali acquisiti in
una serra e due porcilaie attraverso campagne di monitoraggio. Questo nesso è stato
ulteriormente approfondito adottando un approccio numerico che ha portato allo
sviluppo e validazione di tre modelli di simulazione energetica per serre, per stalle
da polli da carne e per stalle da suini da ingrasso. Ciascun modello di simulazione
integra le principali caratteristiche tipiche di tali edifici per stimare con accuratezza
i profili temporali delle condizioni ambientali interne e del consumo di energia
termica ed elettrica. Le potenzialità di questi modelli nel migliorare la prestazione
energetica e le condizioni climatiche di serre e stalle sono state esplorate
analizzando specifiche problematiche relazionate al consumo energetico. Il modello
energetico per le stalle per polli da carne, infatti, è stato adottato per valutare le
potenzialità di un nuovo approccio per la progettazione energeticamente efficiente
dell’involucro basato sull’energia primaria. Lo stesso modello è stato usato per
valutare la variazione del consumo energetico causata dall’adozione di una strategia
di ventilazione mirata al miglioramento del benessere dei polli allevati attraverso la
riduzione della concentrazione interna di gas nocivi.
Questa tesi contribuisce alla transizione verso una agricoltura più sostenibile
fornendo nuove conoscenze e strumenti necessari al miglioramento della
prestazione energetica per controllo climatico di serre e stalle per l’allevamento
intensivo. Le analisi svolte, infatti, quantificano potenziali riduzioni del consumo
energetico ottenibili attraverso l’implementazione di misure di efficientamento
energetico, sia a livello di involucro (isolamento termico) che a livello di sistema
di controllo climatico (ventilatori a portata variabile). Ulteriori misure per
l’efficientamento energetico potrebbero essere valutate attraverso tali modelli che
rappresentano importanti risultati di questa ricerca. Essi, infatti, potrebbero avere
ricadute positive a livello locale in quanto vari portatori d’interesse (agricoltori,
ingegneri e fabbricanti) potrebbero adottarli come strumenti di supporto alle
decisioni per valutare nuove tecnologie, strategie e soluzioni mirate alla
diminuzione del consumo energetico di serre e stalle. Questi nuovi modelli
rappresentano anche un solido punto di partenza per future ricerche in questo
campo. Futuri sviluppi potrebbero portare alla creazione di ulteriori moduli di
calcolo per valutare altri aspetti, come la variazione della produttività, l’emissione
di contaminanti e il benessere animale. Le nuove conoscenze generate in questa tesi
potrebbero avere ricadute positive anche a livello globale, in quanto potrebbero
rappresentare i fondamenti tecnici per nuovi quadri normativi e schemi di incentivi
mirati al miglioramento della performance energetica di edifici agricoli controllati
climaticamente attraverso una strategia di tipo top-down. / [ES] Importantes cambios sociodemográficos están conduciendo hacia un considerable crecimiento de la demanda de alimentos a nivel mundial. Al mismo tiempo se está observando una profunda transformación de la dieta humana, que tiende a incluir más productos de origen animal, fruta y verdura. Invernaderos y granjas de ganadería intensiva pueden desempeñar un papel principal, debido a que proporcionan los productos agrícolas necesarios con rendimientos notablemente mayores que los de la producción en campo abierto y de la ganadería extensiva. Entre los factores que contribuyen a incrementar la productividad de estos edificios agrícolas se sitúa el control de las condiciones climáticas internas. Dicho control se realiza a través de sistemas mecánicos cuyo uso causa un considerable consumo energético que representa una amenaza para la transición hacia una agricultura sostenible. El objetivo de esta tesis es contribuir a la transición hacia una agricultura más sostenible a través de la mejora de la prestación energética por control climático de invernaderos y granjas de ganadería intensiva. Para alcanzar dicho objetivo, se ha adoptado un enfoque triple basado en un análisis de literatura, campañas experimentales de monitorización y actividades de modelización energética. El análisis de literatura se ha llevado a cabo con el fin de desentrañar la red de relaciones existentes entre el control climático y otros dominios de interés de la producción agrícola. El nexo entre prestación energética y control climático se ha acometido analizando conjuntos de datos reales, adquiridos en un invernadero y dos granjas de cerdos. El análisis de dicho nexo se ha profundizado adoptando un enfoque numérico que ha llevado al desarrollo y validación de tres modelos de simulación energética para invernaderos y para granjas de pollos y cerdos. Las potencialidades de estos modelos para la mejora de las prestaciones energéticas y las condiciones climáticas se han explorado analizando problemáticas específicas. El modelo energético para granjas de pollos se ha adoptado para el diseño energéticamente eficiente de la envolvente de este tipo de edificio. El mismo modelo se ha usado para evaluar las variaciones de consumo energético causadas por la adopción de una estrategia de ventilación orientada a la mejora del bienestar de los pollos. Esta tesis contribuye a la transición hacia una agricultura más sostenible proporcionando nuevos conocimientos e instrumentos para la mejora de la prestación energética para el control climático de invernaderos y granjas. Los análisis realizados cuantifican potenciales disminuciones del consumo energético alcanzables a través de la implementación de medidas para la eficiencia energética a nivel de envolvente (aislamiento térmico) y a nivel de sistema de control climático (ventiladores con caudal variable). Ulteriores medidas para la eficiencia energética podrían evaluarse a través de dichos modelos que representan importantes resultados de esta investigación. Estos modelos podrían tener repercusiones positivas a nivel local, ya que muchas partes interesadas (agricultores, ingenieros y fabricantes) podrían adoptarlos como instrumentos de apoyo a la toma de decisiones para evaluar nuevas tecnologías y estrategias orientadas a la disminución del consumo energético. Estos nuevos modelos representan también un sólido punto de partida para futuras investigaciones en este campo. Futuros desarrollos podrían implementar nuevos módulos de cálculos para evaluar otros aspectos, como la variación de la productividad, la emisión de contaminantes y el bienestar animal. Los nuevos conocimientos generados en esta tesis podrían tener repercusiones positivas incluso a nivel global, puesto que podrían representar los fundamentos técnicos para nuevos marcos normativos y sistemas de incentivos orientados a la mejora de la prestación energética de edificios agrícolas controlados climáticamente a través de una estrategia de tipo top-down. / [CA] Importants canvis sociodemogràfics estan conduint cap a un considerable creixement de la demanda d'aliments a nivell mundial. Al mateix temps s'està observant una profunda transformació de la dieta humana, que tendeix a incloure més productes d'origen animal, fruita i verdura. Hivernacles i granges de ramaderia intensiva poden exercir un paper principal, pel fet que proporcionen els productes agrícoles necessaris amb rendiments notablement majors que els de la producció en camp obert i de la ramaderia extensiva. Entre els factors que contribueixen a incrementar la productivitat d'aquests edificis agrícoles se situa el control de les condicions climàtiques internes. Aquest control del clima intern es realitza a través de sistemes mecànics, l'ús dels quals causa un considerable consum energètic que representa una amenaça per a la transició cap a una agricultura sostenible. L'objectiu general d'aquesta tesi és contribuir a la transició cap a una agricultura més sostenible a través de la millora de la prestació energètica per al control climàtic d'hivernacles i granges de ramaderia intensiva. Per a aconseguir aquest objectiu, s'ha adoptat un enfocament triple basat en una anàlisi de literatura, campanyes experimentals de monitoratge i activitats de modelització energètica. L'anàlisi de literatura s'ha dut a terme amb la finalitat de desentranyar la complexa xarxa de relacions existents entre el control climàtic i altres dominis d'interés de la producció agrícola. El nexe entre prestació energètica i control climàtic s'ha analitzat amb conjunts de dades reals, adquirides en un hivernacle i dues granges de porcs. L'anàlisi d'aquest nexe s'ha aprofundit encara més adoptant un enfocament numèric que ha portat al desenvolupament i validació de tres models de simulació energètica per a hivernacles i per a granges de pollastres i porcs d'engreixament. Les potencialitats d'aquests models per a la millora de les prestacions energètiques i les condicions climàtiques s'han explorat analitzant problemàtiques específiques. El model energètic per a granges de pollastres s'ha adoptat per al disseny energèticament eficient de l'envolupant d'aquesta mena d'edifici. El mateix model s'ha usat per a avaluar les variacions de consum energètic causades per l'adopció d'una estratègia de ventilació orientada a la millora del benestar dels pollastres. Aquesta tesi contribueix a la transició cap a una agricultura més sostenible proporcionant nous coneixements i instruments per a la millora de la prestació energètica per al control climàtic d'hivernacles i granges. Les anàlisis realitzades quantifiquen potencials disminucions del consum energètic assolibles a través de la implementació de mesures per a l'eficiència energètica tant a nivell d'envolupant (aïllament tèrmic) com a nivell de sistema de control climàtic (ventiladors amb cabal variable). Ulteriors mesures per a l'eficiència energètica podrien avaluar-se a través d'aquests models que representen importants resultats d'aquesta investigació. Aquests models podrien tindre repercussions positives a nivell local, ja que moltes parts interessades (agricultors, enginyers i fabricants) podrien adoptar-los com a instruments de suport a la presa de decisions per a avaluar noves tecnologies i estratègies orientades a la disminució del consum energètic d'hivernacles i granges. Aquests nous models representen també un sòlid punt de partida per a futures investigacions en aquest camp. Futurs desenvolupaments podrien implementar nous mòduls de càlculs per a avaluar altres aspectes, com la variació de la productivitat, l'emissió de contaminants i el benestar animal. Els nous coneixements generats en aquesta tesi podrien tindre repercussions positives fins i tot a nivell global, ja que podrien representar els fonaments tècnics per a nous marcs normatius i sistemes d'incentius orientats a la millora de la prestació energètica d'edificis agrícoles controlats climàticament a través d'una
estratègia de tipus top-down. / [EN] Socio-demographic trends, such as population growth and urbanization, are leading to a significant increase of the world food demand. At the same time, there is a shift of the human diet toward livestock products, vegetables, and fruit rather than cereals. Greenhouses and livestock houses can play a primary role since they can supply the necessary agricultural products with higher yields than on-field crop production and extensive animal farming. One way in which productivity is enhanced in these agricultural buildings is by a fine-tuned control of the indoor climate conditions. For this purpose, mechanical climate control systems are often adopted, but they entail a considerable energy consumption whose estimated increase may jeopardize the transition toward a sustainable agriculture. The overall objective of this thesis, hence, is to contribute to the transition toward a sustainable agriculture by improving the energy performance for climate control of greenhouses and livestock houses.
To achieve this objective, a three-pronged approach was taken involving a literature review, experimental monitoring campaigns, and energy modelling activities. The literature review was performed to unpick the tangle of mutual relations between climate control and other domains of agricultural production. The nexus between energy performance and climate control was investigated analyzing real datasets acquired through monitoring campaigns performed in a greenhouse and two pig houses. This nexus was further studied adopting a numerical approach which led to the development and validation of three energy simulation models for greenhouses, broiler houses and pig houses. Each simulation model integrates the main features typical of greenhouses and livestock houses to estimate the time profiles of lumped indoor climate conditions and thermal and electrical energy consumption. The opportunities in improving the energy performance and the indoor climate conditions provided by the developed energy models were explored by analyzing specific energy-related problems. The broiler house energy model was adopted to evaluate the potentialities of a new primary energy approach for the energy-efficient envelope design of broiler houses. The same model was applied to evaluate the variation of energy consumption achieved by an improved ventilation strategy aimed at enhancing broiler welfare by reducing indoor noxious gas concentrations.
This thesis contributes to the transition toward a more sustainable agriculture providing new knowledge and tools necessary for improving the energy performance for climate control of greenhouses and livestock houses. The performed analyses, in fact, quantify potential decrease of energy consumption achievable through the implementation of energy-efficient measures at both envelope -thermal insulation- and climate control system -variable angular speed fans- level. Further energy-efficient measures could be evaluated adopting the developed energy simulation models that are valuable outputs of this investigation. These models could have a positive impact at local level since stakeholders -farmers, engineers, and manufacturers- could adopt them as decision support tools for the evaluation of new technologies, strategies and solutions aimed at decreasing the overall energy consumption of greenhouses and livestock houses. These novel models represent also a robust starting point for future research in this field. Future advances may lead to the development of further calculation modules to evaluate other aspects of greenhouses and livestock houses, such as productivity variations, contaminant emissions and animal welfare. The new knowledge generated in this thesis could have positive impacts also at global level since it may represent the technical basis for new normative frameworks and incentive schemes aimed at improving the energy performance of climate-controlled agricultural buildings through a top-down approach. / Costantino, A. (2021). Improving Climate Control and Energy Performance in Greenhouses and Livestock Houses: Modelling Advances and Experimental Results [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/178457 / TESIS
|
Page generated in 0.1292 seconds