Spelling suggestions: "subject:"size dependence"" "subject:"vize dependence""
1 |
Free Metal Clusters Studied by Photoelectron SpectroscopyAndersson, Tomas January 2012 (has links)
Clusters are aggregates of a finite number of atoms or molecules. In the present work, free clusters out of metallic parent materials have been created and studied by synchrotron radiation-based photoelectron spectroscopy. The clusters have been formed and studied in a beam and the electronic structure of the clusters has been investigated. Conclusions have been drawn about the spatial distribution of atoms of different elements in bi-component clusters, about the development of metallicity in small clusters, and about the excitation of plasmons. Bi-component alloy clusters of sodium and potassium and of copper and silver have been produced. The site-sensitivity of the photoelectron spectroscopy technique has allowed us to probe the geometric distribution of the atoms of the constituent elements by comparing the responses from the bulk and surface of the clusters. In both cases, we have found evidence for a surface-segregated structure, with the element with the largest atoms and lowest cohesive energy (potassium and silver, correspondingly) dominating the surface and with a mixed bulk. Small clusters of tin and lead have been probed to investigate the development of metallicity. The difference in screening efficiency between metals and non-metals has been utilized to determine in what size range an aggregate of atoms of these metallic parent materials stops to be metallic. For tin this has been found to occur below ~40 atoms while for lead it happened somewhere below 20-30 atoms. The excitation of bulk and surface plasmons has been studied in clusters of sodium, potassium, magnesium and aluminium, with radii in the nanometer range. The excitation energies have been found to be close to those of the corresponding macroscopic solids. We have also observed spectral features corresponding to multi-quantum plasmon excitation in clusters of Na and K. Such features have in macroscopic solids been interpreted as due to harmonic plasmon excitation. Our observations of features corresponding to the excitation of one bulk and one surface plasmon however suggest the presence of sequential excitation in clusters.
|
2 |
Evaluation on mechanical properties of micro/nano-meter scale materials by resonant vibration / 共振を用いたマイクロ/ナノスケール材料の機械的特性の評価Fang, Hui 23 March 2016 (has links)
京都大学 / 0048 / 新制・論文博士 / 博士(工学) / 乙第13008号 / 論工博第4133号 / 新制||工||1649(附属図書館) / 32936 / (主査)教授 北村 隆行, 教授 北條 正樹, 教授 琵琶 志朗 / 学位規則第4条第2項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM
|
3 |
Influences of Environmental Variability, Genetics and Plant Size on Variation in Sexual and Clonal Reproduction and Allocation of Resources in Three Wetland Plant SpeciesNicholls, Ann M. 18 May 2011 (has links)
No description available.
|
4 |
Effect of Platinum Particle Size on the Sulfur Deactivation of HydrogenationBaldyga, Lyndsey Michelle 01 January 2012 (has links)
A large concern of the fossil fuel and renewable energy industries is the sulfur poisoning of catalysts. In the case of noble metals, such as platinum, it is seen that there is a size trend associated with the level of activity in the presence of sulfur. Smaller nanoparticles could be more tolerant due to sulfur surface vacancies. On the other hand, larger particles could have less deactivation because the sulfur is more attracted to the smaller particles and the sulfur molecules bind stronger to these smaller particles.
The size effect of sulfur deactivation was investigated by testing four sizes of nanoparticles, ranging from 2 - 7 nm with and without sulfur by running an ethylene hydrogenation reaction. The synthesized particles were characterized by mass spectrometry, X - ray diffraction, and transmission electron microscopy. The 7 nm catalyst resulted in being the most sulfur tolerant due to the sulfur particles binding strongly to the smaller particles.
|
5 |
Charge Carrier Dynamics of Bare and Dye-Sensitized Cerium Oxide NanoparticlesEmpey, Jennifer January 2021 (has links)
No description available.
|
6 |
Mechanistic studies of localized corrosion of Al alloys by high resolution in-situ and ex-situ probing techniquesDavoodi, Ali January 2007 (has links)
A multi-analytical approach based on in-situ and ex-situ local probing techniques was employed to investigate localized corrosion mechanisms of some aluminum alloys in chloride containing solutions, focusing on the influence of intermetallic particles (IMPs) in the alloys. In the EN AW-3003 alloy, SEM-EDS analysis revealed constituent and dispersoid IMPs. There are two types of constituent IMPs, with size ranging from 0.5 to several μm, and composition typically Al6(Fe,Mn) or Al12(Mn,Fe)3Si, respectively,having a Mn/Fe ratio of about 1:1. Fine dispersoids of 0.5 μm or less in size normally have the composition Al12Mn3Si1-2. Scanning Kelvin probe force microscopy (SKPFM measurements showed that the constituent IMPs have a higher Volta potential compared to the matrix, and the Volta potential difference increased with particle size, probably related to the composition of the IMPs. The SKPFM results also showed a Volta potential minimum in the boundary region adjacent to some larger IMPs. The open-circuit potential and electrochemical impedance spectroscopy measurements indicated local electrochemical activities occurring on the surface, and active-like dissolution in the acidic solutions, but a passive-like behavior in the near-neutral solutions. Infrared reflection-absorption spectroscopy measurements after exposure and thermodynamic calculations suggested the formation of mixtures of aluminum oxyhydroxide and acetate on the surface in acetic acid solutions. The formation and fraction of dominant species of the corrosion products depend on the pH of the solution, and aluminum chloride compounds may form at very low pH. Moreover, an integrated in-situ atomic force microscopy (AFM) and scanningelectrochemical microscopy (SECM) set-up was used to investigate the localized activities on the surface. With a dual mode probe, acting as both AFM tip and SECM microelectrode, concurrent topography and electrochemical current images were obtained on the same area of the surface. Numerical simulations of the SECM suggested a micrometer lateral resolution under favorable conditions and the ability to resolve μmsized active sites with a separation distance of about 3 μm or larger. The simulations were verified by SECM mapping of the aluminum alloys in the chloride solutions. The AFM/SECM measurements revealed enhanced cathodic activity on some larger IMPs and local anodic dissolution around larger IMPs. In-situ AFM monitoring confirmed preferential dissolution in the boundary region adjacent to some of these IMPs. The results elucidate the micro-galvanic effect and size effect of the IMPs during the initiation of localized corrosion of the Al alloys. Furthermore, differences in corrosion properties between EN AW-3003 and a newly developed Al–Mn–Si–Zr alloy were studied with a similar approach. Compared to EN AW-3003, the new alloy had a smaller number of particles with a large Volta potential difference relative to the matrix. In slightly corrosive solutions extensive localized dissolution and deposition of corrosion products occurred on EN AW-3003, whereas only a small number of corroding sites and “tunnel-like” pits occurred on the Al–Mn–Si–Zr alloy. The lower corrosion activity and the smaller tunnel-like pits resulted in lower material loss of the Al–Mn–Si–Zr alloy, which is beneficial for applications using a thin material. / QC 20100702
|
7 |
Using molecular dynamics to quantify biaxial membrane damage in a multiscale modeling framework for traumatic brain injuryMurphy, Michael Anthony 11 August 2017 (has links)
The current study investigates the effect of strain state, strain rate, and membrane planar area on phospholipid bilayer mechanoporation and failure. Using molecular dynamics, a 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) bilayer was deformed biaxially to represent injury-induced neuronal membrane mechanoporation and failure. For all studies, water forming a bridge through both phospholipid bilayer leaflets was used as a failure metric. To examine the effect of strain state, 72 phospholipid structures were subjected to equibiaxial, 2:1 non-equibiaxial, 4:1 non-equibiaxial, strip biaxial, and uniaxial tensile deformations at the von Mises strain rate of 5.45 × 108 s-1. The stress magnitude, failure strain, headgroup clustering, and damage behavior were strain state dependent. The strain state order of detrimentality in descending order was equibiaxial, 2:1 non-equibiaxial, 4:1 non-equibiaxial, strip biaxial, and uniaxial with failure von Mises strains of 0.46, 0.47, 0.53, 0.77, and 1.67, respectively. Additionally, pore nucleation, growth, and failure were used to create a Membrane Failure Limit Diagram (MFLD) to demonstrate safe and unsafe membrane deformation regions. This MFLD allowed representative equations to be derived to predict membrane failure from in-plane strains. To examine the effect of strain rate, the equibiaxial and strip biaxial strain states were repeated at multiple strain rates. Additionally, a 144 phospholipid structure, which was twice the size of the 72 phospholipid structure in the x dimension, was subjected to strip biaxial tensile deformations to examine planar area effect. The applied strain rates, planar area, and cross-sectional area had no effect on the von Mises strains at which pores greater than 0.1 nm2 were detected (0.509 plus/minus 7.8%) or the von Mises strain at failure (0.68 plus/minus 4.8%). Additionally, changes in bilayer planar and cross-sectional areas did not affect the stress response. However, a strain rate increase from 1.4 × 108 to 6.8 × 108 s-1 resulted in a yield stress increase of 44.1 MPa and a yield strain increase of 0.17. Additionally, a stress and mechanoporation behavioral transition was determined to occur at a strain rate of ~1.4 × 108 s-1. These results provide the basis to implement a more accurate mechano-physiological internal state variable continuum model that captures lower-length scale damage.
|
Page generated in 0.0758 seconds