Following recent theoretical works on successive Wyner-Ziv coding, we propose a practical layered Wyner-Ziv video coder using the DCT, nested scalar quantiza- tion, and irregular LDPC code based Slepian-Wolf coding (or lossless source coding with side information at the decoder). Our main novelty is to use the base layer of a standard scalable video coder (e.g., MPEG-4/H.26L FGS or H.263+) as the decoder side information and perform layered Wyner-Ziv coding for quality enhance- ment. Similar to FGS coding, there is no performance di®erence between layered and monolithic Wyner-Ziv coding when the enhancement bitstream is generated in our proposed coder. Using an H.26L coded version as the base layer, experiments indicate that Wyner-Ziv coding gives slightly worse performance than FGS coding when the channel (for both the base and enhancement layers) is noiseless. However, when the channel is noisy, extensive simulations of video transmission over wireless networks conforming to the CDMA2000 1X standard show that H.26L base layer coding plus Wyner-Ziv enhancement layer coding are more robust against channel errors than H.26L FGS coding. These results demonstrate that layered Wyner-Ziv video coding is a promising new technique for video streaming over wireless networks. For scalable video transmission over the Internet and 3G wireless networks, we propose a system for receiver-driven layered multicast based on layered Wyner-Ziv video coding and digital fountain coding. Digital fountain codes are near-capacity erasure codes that are ideally suited for multicast applications because of their rate- less property. By combining an error-resilient Wyner-Ziv video coder and rateless fountain codes, our system allows reliable multicast of high-quality video to an arbi- trary number of heterogeneous receivers without the requirement of feedback chan- nels. Extending this work on separate source-channel coding, we consider distributed joint source-channel coding by using a single channel code for both video compression (via Slepian-Wolf coding) and packet loss protection. We choose Raptor codes - the best approximation to a digital fountain - and address in detail both encoder and de- coder designs. Simulation results show that, compared to one separate design using Slepian-Wolf compression plus erasure protection and another based on FGS coding plus erasure protection, the proposed joint design provides better video quality at the same number of transmitted packets.

Recently, video has become one of the most important multimedia resources to be shared in our work and daily life. With the development of high frame rate video (HFV), the write speed from high speed camera array sensor to the massive data storage device has been regarded as the main constraints on HFV applications. In this thesis, some low-complexity compression techniques are proposed for HFV acquisition and transmission. The core technique of our developed codec is the application of Slepian-Wolf coding theorem in video compression. The light-duty encoder employs SW encoding, resulting in lower computational cost. The pixel values are transformed into bit sequences, and then we assemble the bits on same bit plane into 8 bit streams. For each bit plane, there is a statistical BSC being constructed to describe the dependency between the source image and the SI image. Furthermore, an improved coding scheme is applied to exploit the spatial correlation between two consecutive bit planes, which is able to reduce the source coding rates. Different from the encoder, the collaborative heavy-duty decoder shoulders the burden of realizing high reconstruction fidelity. Motion estimation and motion compensation employ the block-matching algorithm to predict the SI image. And then the received syndrome sequence is able to be SW decoded with SI. To realize different compression goals, compression are separated to the original and the downsampled cases. With regard to the compression at the original resolution, it completes after SW decoding. While with respect to compression at reduced resolution, the SW decoded image is necessary to be upsampled by the state-of-the-art learning based SR technique: A+ . Since there are some important image details lost after the resolution resizing, ME and MC is applied to modify the upsampled image again, promoting the reconstruction PSNR. Experimental results show that the proposed low-complexity compression techniques are effective on improving reconstruction fidelity and compression ratio. / Thesis / Master of Applied Science (MASc)

Driven by a host of emerging applications (e.g., sensor networks and wireless video), distributed source coding (i.e., Slepian-Wolf coding, Wyner-Ziv coding and various other forms of multiterminal source coding), has recently become a very active research area. This dissertation focuses on multiterminal (MT) source coding problem, and consists of three parts. The first part studies the sum-rate loss of an important special case of quadratic Gaussian multi-terminal source coding, where all sources are positively symmetric and all target distortions are equal. We first give the minimum sum-rate for joint encoding of Gaussian sources in the symmetric case, and then show that the supremum of the sum-rate loss due to distributed encoding in this case is 1 2 log2 5 4 = 0:161 b/s when L = 2 and increases in the order of º L 2 log2 e b/s as the number of terminals L goes to infinity. The supremum sum-rate loss of 0:161 b/s in the symmetric case equals to that in general quadratic Gaussian two-terminal source coding without the symmetric assumption. It is conjectured that this equality holds for any number of terminals. In the second part, we present two practical MT coding schemes under the framework of Slepian-Wolf coded quantization (SWCQ) for both direct and indirect MT problems. The first, asymmetric SWCQ scheme relies on quantization and Wyner-Ziv coding, and it is implemented via source splitting to achieve any point on the sum-rate bound. In the second, conceptually simpler scheme, symmetric SWCQ, the two quantized sources are compressed using symmetric Slepian-Wolf coding via a channel code partitioning technique that is capable of achieving any point on the Slepian-Wolf sum-rate bound. Our practical designs employ trellis-coded quantization and turbo/LDPC codes for both asymmetric and symmetric Slepian-Wolf coding. Simulation results show a gap of only 0.139-0.194 bit per sample away from the sum-rate bound for both direct and indirect MT coding problems. The third part applies the above two MT coding schemes to two practical sources, i.e., stereo video sequences to save the sum rate over independent coding of both sequences. Experiments with both schemes on stereo video sequences using H.264, LDPC codes for Slepian-Wolf coding of the motion vectors, and scalar quantization in conjunction with LDPC codes for Wyner-Ziv coding of the residual coefficients give slightly smaller sum rate than separate H.264 coding of both sequences at the same video quality.

Source coding and channel coding are two important problems in communications. Although side information exists in everyday scenario, the effect of side information is not taken into account in the conventional setups. In this thesis, we focus on the practical designs of two interesting coding problems with side information: Wyner-Ziv coding (source coding with side information at the decoder) and Gel??fand-Pinsker coding (channel coding with side information at the encoder). For WZC, we split the design problem into the two cases when the distortion of the reconstructed source is zero and when it is not. We review that the first case, which is commonly called Slepian-Wolf coding (SWC), can be implemented using conventional channel coding. Then, we detail the SWC design using the low-density parity-check (LDPC) code. To facilitate SWC design, we justify a necessary requirement that the SWC performance should be independent of the input source. We show that a sufficient condition of this requirement is that the hypothetical channel between the source and the side information satisfies a symmetry condition dubbed dual symmetry. Furthermore, under that dual symmetry condition, SWC design problem can be simply treated as LDPC coding design over the hypothetical channel. When the distortion of the reconstructed source is non-zero, we propose a practical WZC paradigm called Slepian-Wolf coded quantization (SWCQ) by combining SWC and nested lattice quantization. We point out an interesting analogy between SWCQ and entropy coded quantization in classic source coding. Furthermore, a practical scheme of SWCQ using 1-D nested lattice quantization and LDPC is implemented. For GPC, since the actual design procedure relies on the more precise setting of the problem, we choose to investigate the design of GPC as the form of a digital watermarking problem as digital watermarking is the precise dual of WZC. We then introduce an enhanced version of the well-known spread spectrum watermarking technique. Two applications related to digital watermarking are presented.

The area of cooperative communications has received tremendous research interest in recent years. This interest is not unwarranted, since cooperative communications promises the ever-so-sought after diversity and multiplexing gains typically associated with multiple-input multiple-output (MIMO) communications, without actually employing multiple antennas. In this dissertation, we consider several cooperative communication channels, and for each one of them, we develop information theoretic coding schemes and derive their corresponding performance limits. We next develop and design practical coding strategies which perform very close to the information theoretic limits. The cooperative communication channels we consider are: (a) The Gaussian relay channel, (b) the quasi-static fading relay channel, (c) cooperative multiple-access channel (MAC), and (d) the cognitive radio channel (CRC). For the Gaussian relay channel, we propose a compress-forward (CF) coding strategy based on Wyner-Ziv coding, and derive the achievable rates specifically with BPSK modulation. The CF strategy is implemented with low-density parity-check (LDPC) and irregular repeataccumulate codes and is found to operate within 0.34 dB of the theoretical limit. For the quasi-static fading relay channel, we assume that no channel state information (CSI) is available at the transmitters and propose a rateless coded protocol which uses rateless coded versions of the CF and the decode-forward (DF) strategy. We implement the protocol with carefully designed Raptor codes and show that the implementation suffers a loss of less than 10 percent from the information theoretical limit. For the MAC, we assume quasi-static fading, and consider cooperation in the low-power regime with the assumption that no CSI is available at the transmitters. We develop cooperation methods based on multiplexed coding in conjunction with rateless codes and find the achievable rates and in particular the minimum energy per bit to achieve a certain outage probability. We then develop practical coding methods using Raptor codes, which performs within 1.1 dB of the performance limit. Finally, we consider a CRC and develop a practical multi-level dirty-paper coding strategy using LDPC codes for channel coding and trellis-coded quantization for source coding. The designed scheme is found to operate within 0.78 dB of the theoretical limit. By developing practical coding strategies for several cooperative communication channels which exhibit performance close to the information theoretic limits, we show that cooperative communications not only provide great benefits in theory, but can possibly promise the same benefits when put into practice. Thus, our work can be considered a useful and necessary step towards the commercial realization of cooperative communications.