[pt] No presente trabalho realizou-se a implementação de um programa de análise de estabilidade de encostas incluindo aspectos não convencionais tais como ruptura progressiva, anisotropia de resistência e considerações de não saturação do solo. O método generalizado das cunhas de Sarma 79 foi utilizado para consideração destes aspectos, tomando-o como base para o desenvolvimento desta nova ferramenta analítica, aplicável ao estudo da estabilidade de encostas em solos residuais não saturados. A simulação dos efeitos da ruptura progressiva foi realizada a partir do trabalho desenvolvido por Huaman (1991), na Puc-Rio. O programa desenvolvido apresenta rotinas de geração automática da superfície de ruptura e do conjunto das inclinações críticas das interfaces das cunhas, além de diversas formas de consideração das poropressões, incluindo a possibilidade de ocorrência da sucção. Além do critério de ruptura de Mohr-Coulomb foi implementado um modelo anisotrópico de resistência que permite a representação de uma anisotropia que pode existir, mesmo em solos homogêneos, de acordo com a metodologia apresentada por Bicalho (1991). Os resultados obtidos através das rotinas implementadas foram comparados com os existentes na literatura, resultantes de análises realizadas por outros métodos de análise, comprovando desta forma, a eficiência do programa desenvolvido neste trabalho. / [en] Here a computer software including non traditional issues as progressive failure, anisotropy and unsaturated soil for general slope stability analysis is implemented.The generalized method Sarma 79 was the base to consider these non-traditional issues on this new tool for the slope stability study of unsaturated residual soils.The progressive failure simulation effects were carried out following Huaman (1991) in his work at PUC-Rio, and aspects of anisotropy followed the work by Bicalho (1991). The computer program has subroutines that automatically construct the critical failure surfaces of any shape and the critical inclination of wedges set besides several ways of considering water pressures and suction ocurring. The strength anisotropy model allows to consider micro structural anisotropy within the context of the Mohr- Coulomb failure criterion. The results from the developed tool were compared with ones published on the current literature.

Road slips are common in Northland Allochthon residual clay soil, and are commonly mitigated using deep soil mixing (DSM). A deficiency in laboratory investigations on Northland Allochthon residual clay and a need for a better understanding of the numerical modelling of DSM columns used to mitigate unstable slopes in this soil type is evident in literature, and has been highlighted by practitioners. This research has aimed to fill aspects of these deficiencies. Field testing and classification tests have provided insight into how the soil varies between sites and with depth, and how in situ testing methods compare to one another. Field testing has also demonstrated that soil property changes around DSM columns have been shown to exist through seismic flat plate dilatometer testing before and after column installation, which has not previously been proven using an in situ method. This is important for practitioners who use DSM to demonstrate the additional soil improvements provided by the columns. The testing of reconstituted soil is fundamental in examining soil behaviour, and this study is the first to examine the triaxial behaviour of reconstituted specimens of Northland Allochthon soil. Laboratory triaxial testing and oedometer testing have allowed for a normalized comparison of the intact strength of Northland Allochthon residual clay soil to its reconstituted state. This work provides an answer to the important question regarding the role of soil structure in this soil type. It was revealed that soil structure results in increased shear strength of the soil, and that this increase is primarily cohesive in nature. The near coincidence of the post-rupture strength of intact specimens with the critical state angle of internal shearing resistance provides support for its use in examining first time slope failures in this soil type. This is an important finding for practitioners, as it demonstrates the value of testing reconstituted specimens, which are much easier to obtain than high quality intact specimens. In addition, relationships between the plasticity index (PI) of the soil and certain soil parameters (and soil behaviour) have been demonstrated to be relevant and useful for this soil type. Soil properties acquired in this study were tabulated along with those from other field sites in Northland Allochthon soil. It was found that there is significant variation between field sites, likely due to varying degrees of weathering, which is an important consideration for practitioners dealing with this soil type. A brief examination of constitutive models for representation of Northland Allochthon residual clay soil have shown that several different models can sufficiently represent the behaviour of this soil. The Mohr-Coulomb model was selected for use in subsequent finite element numerical models. A case study of a road slip at a field site in Northland Allochthon residual clay soil, mitigated using DSM columns, revealed that the use of a pre-existing slip surface after first time failure leads to an improved match between observed field behaviour and the behaviour of the slope as exhibited in a numerical model. This type of failure mechanism has not been previously examined in this soil type, and this case study demonstrates it is a useful approach that should be considered when dealing with second time failure in Northland Allochthon slopes. This numerical model also introduces the replacement ratio method (RRM), a technique used to represent the three dimensional (3D) geometry of the DSM columns in the more commonly used two dimensional (2D) analysis. Examination of laterally loaded DSM columns in plan view, which has not previously been performed in the context of DSM columns, has illustrated how installation effects and column shape influence load displacement curves, and demonstrates the effects of soil arching. This analysis provides practitioners with evidence that improved soil property changes, found to occur around DSM columns, lead to improved DSM column performance. A simplified 3D numerical model of laterally loaded DSM columns, which builds on the ideas developed in the previous two 2D models, has been compared to an identical 2D model. It is shown that the commonly used RRM results in an overestimation of the resisting force provided by the columns as compared to the 3D model. However, this does not necessarily imply that the use of the RRM in an analysis will always result in a safe slope. The degree to which its use will affect the results will depend on the slope geometry, location of the DSM columns, and the type of analysis performed (i.e. factor of safety or deformation based). A modification to the RRM has been proposed. It is recommended that when the DSM column diameter and soil properties are similar to those used in this study, the MRRM developed in this study should be utilized. In circumstances where they differ, it is recommended that practitioners perform a sensitivity analysis using the MRRM developed here as a basis for modifying the RRM in order to determine the extent to which their results are influenced. If the influence is significant, the use of a 3D model should be considered.

No description available.

No description available.

Rainfall induced granular flow slides pose a significant risk in many areas of the world. These failures, characterized by the sudden release of material in a fluid-like manner, are the result of static liquefaction occurring in these slopes. The static liquefaction phenomenon has been linked to instability. Instability behaviour is primarily studied under undrained triaxial conditions, and although many instability theories have therefore been defined in this stress space, these have been shown to also extend into plane strain conditions. In order to further investigate this behaviour under these stress conditions, Wolinsky et al. (2013) developed a tilt-table soil box for use in a geotechnical centrifuge to analyze instability in infinite slope soil models. This testing apparatus has been used to simulate instability in plane strain under both dry and saturated soil conditions. Stress-controlled experiments were performed on dry infinite slope soil models to investigate the effects of both void ratio and effective stress on instability behaviour. By performing these tests dry, this test apparatus provides the ability to decouple the triggers of instability from the corresponding response in pore pressure and the consequences. The results of this testing confirmed that the instability line angle is a function of both void ratio and effective stress. As the void ratio decreases and effective stress in the soil model increases, the resulting instability line angle will increase. This testing also demonstrated typical stress-dilatancy behaviour in these infinite slope models, characterized by contractive response in loose soils and dilative response in dense soil subject to increasing shear stress. Secondly, this testing apparatus was used to investigate the effects of seepage force on instability behaviour in granular slopes through the introduction of groundwater seepage in the form of a rising groundwater level. Although the results illustrated shear and volumetric response to these increased pore water pressures, these were not significant enough to initiate instability and the resulting pore water response leading to failure. It has been determined that this apparatus must be further adapted to dissipate the matric suctions developed above the water table during groundwater rise. / Thesis (Master, Civil Engineering) -- Queen's University, 2013-12-03 21:06:56.806

No description available.

The coupled effect of using geosynthetic reinforcement and randomly distributed fibers on the stability of slopes was evaluated using finite element modeling and limit equilibrium methods by analyzing a case study in Oslo, Norway. The main objective was to simulate the failure condition of the original slope and quantify the improved stability of a hypothetical reinforced slope constructed with geosynthetic layers and distributed discrete fibers. The stability of the slope was evaluated in both the short-term condition with its' undrained shear strength parameters, and the long-term drained condition. Results indicate that the combination of the techniques was found to have a possible increase of about 40% in the short-term condition and about 60% in the long-term condition of the factor safety associated with the slope. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2019. / FAU Electronic Theses and Dissertations Collection

Slope instabilities have been affecting the grade slope of Provincial Trunk Highway 5 near the junction with Provincial Trunk Highway 10 in northwestern Manitoba for over 50 years. In recent years, the instabilities have resulted in significant damage to the highway pavement surface. In 2011, Manitoba Infrastructure and Transportation initiated a geotechnical investigation to gain a better understanding of the failure, identify possible failure mechanisms, and explore various remedial design alternatives in order to stabilize the slope. The site was instrumented with slope inclinometers and vibrating wire piezometers, and monitored over a period of two years. An extensive laboratory testing program was completed to compare the results of direct shear tests and torsional ring shear tests for determining the shear strength of the underlying Cretaceous clay shale. Measured values were compared with values back analyzed using limit equilibrium analysis. A coupled finite element model was used to model the expected excess porewater pressure response, and therefore the stability of the slope, during construction of a stabilization berm. It was subsequently calibrated to agree with the measured porewater pressure responses from the instrumentation. Finally, spring flood conditions were simulated to determine the effect of multiple flash flood events on the stability of the slope.

This dissertation investigates the nature of submarine landslides along the deformation front of the northern Cascadia subduction zone. As the first slope stability analysis on the west coast of Vancouver Island, this study covers a variety of large-scale tectonic to small-scale, site-specific factors to investigate the nature of slope failure. Slope failure occurred mainly on the steep slopes of frontal ridges that were formed by compressive forces due to the subduction of the Juan de Fuca plate. Multi-beam swath bathymetry data are used to study the morphology of the whole margin and the geometry of two Holocene landslides that serve as representative examples. The overall margin stability is estimated using the critical taper theory, and a first-order limit equilibrium slope stability analysis provides threshold values for external forces to cause slope failure. The present-day pore pressure regime at different sites of the Cascadia margin is estimated from log-density data and expected ground accelerations are calculated via ground motion attenuation relationships. A comparison to threshold values derived from the limit equilibrium analysis suggests that, at present, slope stability is more sensitive to overpressure than to earthquake shaking. Differences in power spectral density derived from OBS-velocity data imply a slightly amplified ground response at the ridge crest compared to sites along the continental shelf and abyssal plain. Apart from estimating the trigger mechanisms of submarine landslides offshore Vancouver Island, a particular consideration is given to the potential link between slope failure and methane hydrate occurrence. The history of the gas hydrate stability zone (GHSZ) boundaries is investigated using information on regional sea-level history. Assuming colder ocean-bottom temperatures during the Holocene, a gradual shoaling of the BSR is inferred, which potentially could have caused hydrate melting. Pore pressure due to hydrate dissociation, as estimated by a previously developed method, varies over several orders of magnitude. Depending on sediment permeability, overpressure ratios can be comparable to threshold values. The two Holocene landslides are modeled numerically using a two-dimensional finite difference code in order to recreate the along-strike variability in ridge geometry and slide morphology observed along the northern Cascadia margin. Geometry and morphology correlate with the two prevalent slide mechanisms and model results suggest that sediment yield strength and average slide thickness are associated with the slide mechanism as well. / Graduate / 0373 / nscholz@uvic.ca

No description available.