The objective of this doctoral thesis is to study three different innovative noise control techniques in ducts namely: acoustic metamaterials, porous absorbers and microperforates. There has been a lot of research done on all these three topics in the context of duct acoustics. This research will assess the potential of the acoustic metamaterial technique and compare to the use of conventional methods using microperforated plates and/or porous materials.  The objective of the metamaterials part is to develop a physical approach to model and synthesize bulk moduli and densities to feasibly control the wave propagation pattern, creating quiet zones in the targeted fluid domain. This is achieved using an array of locally resonant metallic patches. In addition to this, a novel thin slow sound material is also proposed in the acoustic metamaterial part of this thesis. This slow sound material is a quasi-labyrinthine structure flush mounted to a duct, comprising of coplanar quarter wavelength resonators that aims to slow the speed of sound at selective resonance frequencies. A good agreement between theoretical analysis and experimental measurements is demonstrated. The second technique is based on acoustic porous foam and it is about modeling and characterization of a novel porous metallic foam absorber inside ducts. This material proved to be a similar or better sound absorber compared to the conventional porous absorbers, but with robust and less degradable properties. Material characterization of this porous absorber from a simple transfer matrix measurement is proposed.The last part of this research is focused on impedance of perforates with grazing flow on both sides. Modeling of the double sided grazing flow impedance is done using a modified version of an inverse semi-analytical technique. A minimization scheme is used to find the liner impedance value in the complex plane to match the calculated sound field to the measured one at the microphone positions. / <p>QC 20160923</p>

Dans cette thèse, nous étudions un métamatériau inspiré de la paille de blé pour l'absorption parfaite du son. Une botte de paille estidéalisée comme un milieu poreux anisotrope, composé d’un arrangement périodique très concentré de tubes creux cylindriques. L’approche théorique de ce métamatériau repose sur l'homogénéisation asymptotique à deux échelles d'un réseau perméable de résonateursparfaitement rigides dont la physique est enrichi par des résonances internes. Les principales caractéristiques de ce milieu poreux sont lacompressibilité effective négative autour de la résonance du tube et la réduction drastique de la vitesse de propagation du son (slowsound) à très basse fréquence. Une configuration optimale est conçue, basée sur la condition de couplage critique, pour laquelle la fuited’énergie du système résonnant ouvert est parfaitement compensée par les pertes intrinsèques induites par les pertes viscothermiques.Des mesures en tube à impédance sont effectuées sur des échantillons fabriqués par impression additive pour valider les résultatsthéoriques. Nous montrons que ce métamatériau est un absorbeur sub-longueur d'onde capable d’une absorption parfaite à très bassefréquence et d'introduire une quasi-bande interdite autour de la résonance du tube. De plus, la nature anisotrope de ce matériau conduit àune absorption globalement élevée à basse fréquence et ce pour toutes les incidences. Cette étude offre la possibilité de concevoir unabsorbeur acoustique sélectif en angle et en fréquence. Pour conclure, les résultats de cette thèse montrent que la paille est un boncandidat pour une absorption acoustique parfaite. / Straw-inspired metamaterials for sound absorption are investigated in this Thesis. A straw stack is idealized as a highly concentratedresonant anisotropic porous medium constituted of a periodic arrangement of densely packed cylindrical hollow tubes. The approach tothis metamaterial relies on the two-scale asymptotic homogenization of a permeable array of perfectly rigid resonators, where the physicsis further enriched by tailoring inner resonances. The main features of such sound absorbing medium are the possibility for the effectivecompressibility to become negative around the tube resonance and the drastic reduction of the effective sound speed (slow sound) at verylow frequency in the system. Moreover, an optimal configuration for sound absorption is designed, based on the critical couplingcondition, in which the energy leakage out of the open resonant system is perfectly compensated by the intrinsic losses induced by thevisco-thermal losses both in the anisotropic matrix and in the resonators. Impedance tube measurements are performed on 3-D printedsamples with controlled parameters to validate the theoretical results. This metamaterial is a sub-wavelength absorber that can achievetotal absorption at a very low frequency and possesses a quasi-band-gap around the tube resonance. Furthermore, the anisotropic nature ofthe configuration gives rise to high absorption at low-frequency range for all incidences and diffuse field excitation. It paves the way tothe design of angular and frequency selective sound absorber. To conclude, the results of this Thesis show that straw is a good candidatefor perfect sound absorption.