In this work, we study the use of a spatial light modulator (SLM) for local manipulation of phase in interfering laser beams to fabricate photonic crystal templates with embedded, engineered defects. A SLM displaying geometric phase patterns was used as a digitally programmable phase mask to fabricate 4-fold and 6-fold symmetric photonic crystal templates. Through pixel-by-pixel phase engineering, digital control of the phases of one or more of the interfering beams was demonstrated, thus allowing change in the interference pattern. The phases of the generated beams were programmed at specific locations, resulting in defect structures in the fabricated photonic lattices such as missing lattice line defects, and single-motif lattice defects in dual-motif lattice background. The diffraction efficiency from the phase pattern was used to locally modify the filling fraction in holographically fabricated structures, resulting in defects with a different fill fraction than the bulk lattice. Through two steps of phase engineering, a spatially variant lattice defect with a 90° bend in a periodic bulk lattice was fabricated. Finally, by reducing the relative phase shift of the defect line and utilizing the different diffraction efficiency between the defect line and the background phase pattern, desired and functional defect lattices can be registered into the background lattice through direct imaging of the designed phase patterns.

In Optogenetics, cells, e.g. neurons or cardiac cells, are genetically altered to produce for example the lightsensitive protein Channelrhodopsin-2. Illuminating these cells induces action potentials or contractions and therefore allows to control electrical activity. Thus, light-induced cell stimulation can be used to gain insight to various biological processes. Many optogenetics studies, however, use only full field illumination and thus gain no local information about their specimen. But using modern spatial light modulators (SLM) in conjunction with computer-generated holograms (CGH), cells may be stimulated locally, thus enabling the research of the foundations of cell networks and cell communications. In our contribution, we present a digital holographic system for the patterned, spatially resolved stimulation of cell networks. We employ a fast ferroelectric liquid crystal on silicon SLM to display CGH at up to 1.7 kHz. With an effective working distance of 33 mm, we achieve a focus of 10 µm at a positioning accuracy of the individual foci of about 8 µm. We utilized our setup for the optogenetic stimulation of clusters of cardiac cells derived from induced pluripotent stem cells and were able to observe contractions correlated to both temporal frequency and spatial power distribution of the light incident on the cell clusters.

No description available.

Thesis (PhD)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: High-dimensional quantum entanglement offers an increase in information capacity per photon; a highly desirable property for quantum information processes such as quantum communication, computation and teleportation. As the orbital angular momentum (OAM) modes of light span an infinite-dimensional Hilbert space, they have become frontrunners in achieving entanglement in higher dimensions. In light of this, we investigate the potential of OAM entanglement of photons by controlling the parameters in both the generation and measurement systems. We show the experimental procedures and apparatus involved in generating and measuring entangled photons in two-dimensions. We verify important quantum tests such as the Einstein, Podolsky and Rosen (EPR) paradox using OAM and angle correlations, as well as a violation of a Bell-type inequality. By performing a full state tomography, we characterise our quantum state and show we have a pure, highly entangled quantum state. We demonstrate that this method can be extended to higher dimensions. The experimental techniques used to generate and measure OAM entanglement place an upper bound on the number of accessible OAM modes. As such, we investigate new methods in which to increase the spiral bandwidth of our generated quantum state. We alter the shape of the pump beam in spontaneous parametric down-conversion and demonstrate an effect on both OAM and angle correlations. We also made changes to the measurement scheme by projecting the photon pairs into the Bessel-Gaussian (BG) basis and demonstrate entanglement in this basis. We show that this method allows the measured spiral bandwidth to be optimised by simply varying the continuous radial parameter of the BG modes. We demonstrate that BG modes can be entangled in higher dimensions compared with the commonly used helical modes by calculating and comparing the linear entropy and fidelity for both modes. We also show that quantum entanglement can be accurately simulated using classical light using back-projection, which allows the study of projective measurements and predicts the strength of the coincidence correlations in an entanglement experiment. Finally, we make use of each of the techniques to demonstrate the effect of a perturbation on OAM entanglement measured in the BG basis. We investigate the self-healing property of BG beams and show that the classical property is translated to the quantum regime. By calculating the concurrence, we see that measured entanglement recovers after encountering an obstruction. / AFRIKAANSE OPSOMMING: Hoë-dimensionele kwantumverstrengeldheid bied ’n toename in inligtingskapasiteit per foton. Hierdie is ’n hoogs wenslike eienskap vir kwantum inligting prosesse soos kwantum kommunikasie, berekening en teleportasie. Omdat die orbitale hoekmomentum (OAM) modusse van lig ’n oneindig dimensionele Hilbertruimte beslaan, het dit voorlopers geword in die verkryging van verstrengeling in hoër dimensies. In die lig hiervan, ondersoek ons die potensiaal van OAM verstrengeling van fotone deur die parameters in beide die generering en meting stelsels te beheer. Ons toon die eksperimentele prosedures en apparaat wat betrokke is by die generering en die meet van verstrengelde fotone in twee dimensies. Ons verifieer kwantumtoetse, soos die Einstein, Podolsky en Rosen (EPR) paradoks vir OAM en die hoekkorrelasies, sowel as ’n skending van ’n Bell-tipe ongelykheid. Deur middel van ’n volledige toestand tomografie, karakteriseer ons die kwantum toestand en wys ons dat dit ’n suiwer, hoogs verstrengel kwantum toestand is. Ons toon ook dat hierdie metode uitgebrei kan word na hoër dimensies. Die eksperimentele tegnieke wat tydens die generasie en meet van OAM verstrengeling gebruik is, plaas ’n bogrens op die aantal toeganklik OAM modusse. Dus ondersoek ons nuwe metodes om die spiraal bandwydte van ons gegenereerde kwantum toestand te verhoog. Ons verander die vorm van die pomp bundel in spontane parametriese af-omskakeling en demonstreer die uitwerking daarvan op beide OAM en die hoekkorrelasies. Ons het ook veranderinge aan die meting skema gemaak deur die foton pare op die Bessel-Gauss (BG) basis te projekteer. Ons wys dat hierdie metode die gemeetde spiraal bandwydte kan optimeer deur eenvoudig die kontinue radiale parameter van die BG modes te verander. Ons demonstreer dat BG modusse verstrengel kan word in hoër dimensies as die heliese modusse, wat algemeen gebruik word, deur berekeninge te maak en te vergelyk met lineêre entropie en vir beide modusse. Ons wys ook dat kwantumverstrengling akkuraat nageboots kan word, met behulp van die klassieke lig terug-projeksie, wat die studie van projeksie metings toelaat en voorspel die krag van die saamval korrelasies in ’n verstrengeling eksperiment. Ten slotte, gebruik ons elk van die tegnieke om die effek van ’n storing op OAM verstrengling wat in die BG basis gemeet is, te demonstreer. Ons ondersoek die self-genesingseienskap van BG bundels en wys dat die klassieke eienskap vertaal na die kwantum-gebied. Deur die berekening van die konkurrensie (concurrence), sien ons dat die gemeetde verstrengeling herstel word nadat ’n obstruksie ondervind is.

Le stockage de données par holographie suscite un intérêt renouvelé. Il semble bien placé pour conduire à une nouvelle génération de mémoires optiques aux capacités et débits de lecture bien supérieurs à ceux des disques optiques actuels basés sur l’enregistrement dit surfacique. Dans ce travail de thèse, nous proposons une nouvelle architecture de stockage optique de données qui s’inspire du principe de la photographie interférentielle de Lippmann. Les informations y sont inscrites dans le volume du matériau d’enregistrement sous la forme de pages de données par multiplexage en longueur d’onde en exploitant la sélectivité de Bragg. Cette technique, bien que très voisine de l’holographie, n’avait jamais été envisagée pour le stockage à hautes capacités. L’objectif de la thèse a été d’analyser cette nouvelle architecture afin de déterminer les conditions pouvant conduire à de très hautes capacités. Cette analyse s’est appuyée sur un outil de simulation numérique des processus de diffraction en jeu dans cette mémoire interférentielle. Elle nous a permis de définir deux conditions sous lesquelles ces hautes capacités sont atteignables. En respectant ces conditions, nous avons conçu un démonstrateur de mémoire dit de « Lippmann » et avons ainsi démontré expérimentalement que la capacité est bien proportionnelle à l’épaisseur du matériau d’enregistrement. Avec une telle architecture, des capacités de l’ordre du Téraoctet sont attendues pour des disques de 12 cm de diamètre. / Nowadays, the holographic data storage presents a renewed interest. It seems well placed to lead a new generation of optical storage capacity and playback speeds much higher than current optical discs based on the recording onto a surface. In this thesis, we propose a new architecture for optical data storage that is based on the principle of Lippmann photography interferential. Information are included in the volume of the recording material in the form of pages of data multiplexing in wavelength by exploiting the Bragg selectivity. This technique, although very similar to holography, had never been considered for high storage capacities. The aim of the thesis was to analyze this new architecture to determine the conditions that can lead to very high capacities. This analysis was based on a numerical simulation tool of diffraction process involved in this memory interferential. It allowed us to define two conditions under which these high capacities are achievable. In accordance with these conditions, we developed a demonstrator called "Lippmann’s memory" and have thus demonstrated experimentally that the capacity is proportional to the thickness of the recording material. With such an architecture, Terabyte disks of 12 cm in diameter are expected.

Orientador: Prof. Dr. Marcos Roberto de Rocha Gesualdi / Tese (doutorado) - Universidade Federal do ABC, Programa de Pós-Graduação em Física, 2014. / Neste trabalho, realizando uma revisão teórica e experimental da geração de feixes não difrativos a partir dos fundamentos de teoria de difração, Hologramas Gerados por Computador (CGH) e Holograa, utilizando Moduladores Espaciais de Luz (SLM). Mostramos a possibilidade de geração de múltiplos feixes não difrativos de iguais ou diferentes simetrias utilizando a reconstrução holográca em SLM. Apresentamos de forma inédita a obtenção experimental de um novo conceito de feixe não difrativo que utiliza a superposição de feixes de Bessel cujo padrão longitudinal de intensidade pode ser escolhido a priori, a chamada Frozen Wave. Finalmente realizamos uma revisão teórica das propriedades de ondas em meios não lineares Fotorrefrativos, e a partir desse estudo desenvolvemos e montamos um arranjo de Holograa Fotorrefrativa e demonstramos experimentalmente a possibilidade de gerar feixes não difrativos utilizando essa técnica. Evidenciamos através dessa técnica uma nova possibilidade de geração de feixes não difrativos e em especial para geração de Frozen Waves. / In this work, we perform a theoretical and experimental review of genration non diractive beams since difraction theory, Computing Generation Hologram (CGH) and Holography using Spatial Light Modulator (SLM). We show the possibility to generate multiple non diractive beams with the igual or dierent symetry using a holographic reconstruction in SLM. We show for the rst time the experimental observation of a new nondifractive beam concepte that use Bessel beam superpositions whose intensite longitudinal shape can be chosen a priori, known as Frozen Wave. Finally, we made a theoretical review of the nonlinear Photorefractive properties, and of from this study we developed and mont a Photorefractive holography setup to show the nondiractive beam generation through this technique. Evidencing through this technique a new possibility to generate a non diractive beams and on special case to generate Frozen Waves.

<p>Laser beam control is important in many applications. Phase modulating spatial light modulators (SLMs) can be used to electronically alter the phase distribution of an optical wave-front and thus change the direction and shape of a laser beam. Physical constraints set limitations to the SLM and an ideal phase distribution can usually not be realised. In order to understand how such components can be used for non-mechanical beam control three nematic liquid crystal (NLC) SLMs have been thoroughly characterised and modelled.</p><p>The pixel structure and phase quantisation give a discrepancy between ideal and realised phase distributions. The impact on beam steering capability was examined by measurements and simulations of the intensity distribution in the far-field.</p><p>In two of the studied SLMs the pixel period was shorter than the thickness of the LC layer giving the optical phase shift. This results in a so-called “fringing field”, which was shown to degrade the phase modulation and couple light between polarisation modes. The deformation of the LC was simulated and a finite-difference time-domain (FDTD) algorithm was used to calculate how polarised light propagates through the optically anisotropic SLM.</p><p>Non-mechanical beam steering and tracking in an optical free-space communication link were demonstrated. Continual optimisation of the steering angle was achieved by feedback from a video camera.</p><p>The optical properties of the SLM in the time period right after a voltage update were studied. It was shown how light is redistributed between orders during the switching from one blazed grating to another. By appropriate choice of the blazed gratings the effects on the diffraction efficiency can be minimised.</p><p>The detailed knowledge of the SLM structure and its response to electronic control makes it possible to predict and optimise the device performance in future systems.</p>

Laser beam control is important in many applications. Phase modulating spatial light modulators (SLMs) can be used to electronically alter the phase distribution of an optical wave-front and thus change the direction and shape of a laser beam. Physical constraints set limitations to the SLM and an ideal phase distribution can usually not be realised. In order to understand how such components can be used for non-mechanical beam control three nematic liquid crystal (NLC) SLMs have been thoroughly characterised and modelled. The pixel structure and phase quantisation give a discrepancy between ideal and realised phase distributions. The impact on beam steering capability was examined by measurements and simulations of the intensity distribution in the far-field. In two of the studied SLMs the pixel period was shorter than the thickness of the LC layer giving the optical phase shift. This results in a so-called “fringing field”, which was shown to degrade the phase modulation and couple light between polarisation modes. The deformation of the LC was simulated and a finite-difference time-domain (FDTD) algorithm was used to calculate how polarised light propagates through the optically anisotropic SLM. Non-mechanical beam steering and tracking in an optical free-space communication link were demonstrated. Continual optimisation of the steering angle was achieved by feedback from a video camera. The optical properties of the SLM in the time period right after a voltage update were studied. It was shown how light is redistributed between orders during the switching from one blazed grating to another. By appropriate choice of the blazed gratings the effects on the diffraction efficiency can be minimised. The detailed knowledge of the SLM structure and its response to electronic control makes it possible to predict and optimise the device performance in future systems.

Le but initial de ce travail de thèse est de proposer une technique (basée sur la Fluorescence Correlation Spectroscopy, FCS) pour améliorer la sensibilité dans la discrimination de deux molécules ayant des constantes de diffusion proches. C'est dans ce contexte que nous avons étudié la FCCS (Fluorescence Cross-Correlation Spectroscopy). A défaut d'améliorer la sensibilité de la Spectroscopie à Correlation de Fluorescence nous avons proposé trois géométries de FCCS pour élargir le champ d'application de la corrélation de fluorescence.

In this dissertation, we study the optical property of 2D graded photonic super-crystals (GPSCs) for photon management. We focused primarily on manipulation and control of light by using the newly discovered GPSCs which present great opportunity for electromagnetic wave control in photonic devices. The GPSC has been used to explore the superior capability of improving the light extraction efficiency of OLEDs. The enhancement of extraction efficiency has been explained in term of destructive interference of surface plasmon resonance and out-coupling of surface plasmon through phase matching provided by GPSC and verified by e-field intensity distributions. A large light extraction efficiency up to 75% into glass substrate has been predicted through simulation. We also study the light trapping enhancement in GPSCs. Broadband, wide incident angle, and polarization independent light trapping enhancement is achieved in silicon solar cells patterned with the GPSCs. In addition, novel 2D GPSCs were fabricated using holographic lithography through the interference lithography by two sets of multiple beams arranged in a cone geometry using a spatial light modulator (SLM). Finally, we also report a fabrication of GPSCs with a super-cell size of 12a×12a by using e-beam lithography. Diffraction pattern from GPSCs reveals unique diffraction properties. In an application aspect, light emitting diode arrays can be replaced by a single light emitting diode shinning onto the diffraction pattern for a uniform fluorescence.