Flow speed describes general traffic operation conditions on a segment of roadway. It is also used to diagnose special conditions such as congestion and incidents. Accurate speed estimation plays a critical role in traffic management or traveler information systems. Data from loop detectors have been primary sources for traffic information, and single loop are the predominant loop detector type in many places. However, single loop detectors do not produce speed output. Therefore, speed estimation using single loop outputs has been an important issue for decades. This dissertation research presents two methodologies for speed estimation using single loop outputs. Based on findings from past studies and examinations in this research, it is verified that speed estimation is a nonlinear system under various traffic conditions. Thus, a methodology of using Unscented Kalman Filter (UKF) is first proposed for such a system. The UKF is a parametric filtering technique that is suitable for nonlinear problems. Through an Unscented Transformation (UT), the UKF is able to capture the posterior mean and covariance of a Gaussian random variable accurately for a nonlinear system without linearization. This research further shows that speed estimation is a nonlinear non-Gaussian system. However, Kalman filters including the UKF are established based on the Gaussian assumption. Thus, another nonlinear filtering technique for non-Gaussian systems, the Particle Filter (PF), is introduced. By combining the strengths of both the PF and the UKF, the second speed estimation methodology - Unscented Particle Filter (UPF) is proposed for speed estimation. The use of the UPF avoids the limitations of the UKF and the PF. Detector data are collected from multiple freeway locations and the microscopic traffic simulation program CORSIM. The developed methods are applied to the collected data for speed estimation. The results show that both proposed methods have high accuracies of speed estimation. Between the UKF and the UPF, the UPF has better performance but has higher computation cost. The improvement of speed estimation will benefit real-time traffic operations by improving the performance of applications such as travel time estimation using a series of single loops in the network, incident detection, and large truck volume estimation. Therefore, the work enables traffic analysts to use single loop outputs in a more cost-effective way.

Flow speed describes general traffic operation conditions on a segment of roadway. It is also used to diagnose special conditions such as congestion and incidents. Accurate speed estimation plays a critical role in traffic management or traveler information systems. Data from loop detectors have been primary sources for traffic information, and single loop are the predominant loop detector type in many places. However, single loop detectors do not produce speed output. Therefore, speed estimation using single loop outputs has been an important issue for decades. This dissertation research presents two methodologies for speed estimation using single loop outputs. Based on findings from past studies and examinations in this research, it is verified that speed estimation is a nonlinear system under various traffic conditions. Thus, a methodology of using Unscented Kalman Filter (UKF) is first proposed for such a system. The UKF is a parametric filtering technique that is suitable for nonlinear problems. Through an Unscented Transformation (UT), the UKF is able to capture the posterior mean and covariance of a Gaussian random variable accurately for a nonlinear system without linearization. This research further shows that speed estimation is a nonlinear non-Gaussian system. However, Kalman filters including the UKF are established based on the Gaussian assumption. Thus, another nonlinear filtering technique for non-Gaussian systems, the Particle Filter (PF), is introduced. By combining the strengths of both the PF and the UKF, the second speed estimation methodology—Unscented Particle Filter (UPF) is proposed for speed estimation. The use of the UPF avoids the limitations of the UKF and the PF. Detector data are collected from multiple freeway locations and the microscopic traffic simulation program CORSIM. The developed methods are applied to the collected data for speed estimation. The results show that both proposed methods have high accuracies of speed estimation. Between the UKF and the UPF, the UPF has better performance but has higher computation cost. The improvement of speed estimation will benefit real-time traffic operations by improving the performance of applications such as travel time estimation using a series of single loops in the network, incident detection, and large truck volume estimation. Therefore, the work enables traffic analysts to use single loop outputs in a more cost-effective way.

Flow speed describes general traffic operation conditions on a segment of roadway. It is also used to diagnose special conditions such as congestion and incidents. Accurate speed estimation plays a critical role in traffic management or traveler information systems. Data from loop detectors have been primary sources for traffic information, and single loop are the predominant loop detector type in many places. However, single loop detectors do not produce speed output. Therefore, speed estimation using single loop outputs has been an important issue for decades. This dissertation research presents two methodologies for speed estimation using single loop outputs. Based on findings from past studies and examinations in this research, it is verified that speed estimation is a nonlinear system under various traffic conditions. Thus, a methodology of using Unscented Kalman Filter (UKF) is first proposed for such a system. The UKF is a parametric filtering technique that is suitable for nonlinear problems. Through an Unscented Transformation (UT), the UKF is able to capture the posterior mean and covariance of a Gaussian random variable accurately for a nonlinear system without linearization. This research further shows that speed estimation is a nonlinear non-Gaussian system. However, Kalman filters including the UKF are established based on the Gaussian assumption. Thus, another nonlinear filtering technique for non-Gaussian systems, the Particle Filter (PF), is introduced. By combining the strengths of both the PF and the UKF, the second speed estimation methodology—Unscented Particle Filter (UPF) is proposed for speed estimation. The use of the UPF avoids the limitations of the UKF and the PF. Detector data are collected from multiple freeway locations and the microscopic traffic simulation program CORSIM. The developed methods are applied to the collected data for speed estimation. The results show that both proposed methods have high accuracies of speed estimation. Between the UKF and the UPF, the UPF has better performance but has higher computation cost. The improvement of speed estimation will benefit real-time traffic operations by improving the performance of applications such as travel time estimation using a series of single loops in the network, incident detection, and large truck volume estimation. Therefore, the work enables traffic analysts to use single loop outputs in a more cost-effective way.

Flow speed describes general traffic operation conditions on a segment of roadway. It is also used to diagnose special conditions such as congestion and incidents. Accurate speed estimation plays a critical role in traffic management or traveler information systems. Data from loop detectors have been primary sources for traffic information, and single loop are the predominant loop detector type in many places. However, single loop detectors do not produce speed output. Therefore, speed estimation using single loop outputs has been an important issue for decades. This dissertation research presents two methodologies for speed estimation using single loop outputs. Based on findings from past studies and examinations in this research, it is verified that speed estimation is a nonlinear system under various traffic conditions. Thus, a methodology of using Unscented Kalman Filter (UKF) is first proposed for such a system. The UKF is a parametric filtering technique that is suitable for nonlinear problems. Through an Unscented Transformation (UT), the UKF is able to capture the posterior mean and covariance of a Gaussian random variable accurately for a nonlinear system without linearization. This research further shows that speed estimation is a nonlinear non-Gaussian system. However, Kalman filters including the UKF are established based on the Gaussian assumption. Thus, another nonlinear filtering technique for non-Gaussian systems, the Particle Filter (PF), is introduced. By combining the strengths of both the PF and the UKF, the second speed estimation methodology - Unscented Particle Filter (UPF) is proposed for speed estimation. The use of the UPF avoids the limitations of the UKF and the PF. Detector data are collected from multiple freeway locations and the microscopic traffic simulation program CORSIM. The developed methods are applied to the collected data for speed estimation. The results show that both proposed methods have high accuracies of speed estimation. Between the UKF and the UPF, the UPF has better performance but has higher computation cost. The improvement of speed estimation will benefit real-time traffic operations by improving the performance of applications such as travel time estimation using a series of single loops in the network, incident detection, and large truck volume estimation. Therefore, the work enables traffic analysts to use single loop outputs in a more cost-effective way.

Although the primary purpose of the signal received by amobile handset or smartphone is to enable wireless communication, the information extracted can be reused to provide a number of additional services. Two such services discussed in this thesis are: mobile speed estimation and signal anomaly detection. The proposed algorithms exploit the propagation environment specific information that is already imprinted on the received signal and therefore do not incur any additional signalling overhead. Speed estimation is useful for providing navigation and location based services in areas where global navigation satellite systems (GNSS) based devices are unusable while the proposed anomaly detection algorithms can be used to locate signal faults and aid spectrum sensing in cognitive radio systems. The speed estimation algorithms described within this thesis require a receiver with at least two antenna elements and a wideband radio frequency (RF) signal source. The channel transfer function observed at the antenna elements are compared to yield an estimate of the device speed. The basic algorithm is a one-dimensional and unidirectional two-antenna solution. The speed of the mobile receiver is estimated from a knowledge of the fixed inter-antenna distance and the time it takes for the trailing antenna to sense similar channel conditions previously observed at the leading antenna. A by-product of the algorithm is an environment specific spatial correlation function which may be combined with theoretical models of spatial correlation to extend and improve the accuracy of the algorithm. Results obtained via computer simulations are provided. The anomaly detection algorithms proposed in this thesis highlight unusual signal features while ignoring events that are nominal. When the test signal possesses a periodic frame structure, Kullback-Leibler divergence (KLD) analysis is employed to statistically compare successive signal frames. A method of automatically extracting the required frame period information from the signal is also provided. When the signal under test lacks a periodic frame structure, information content analysis of signal events can be used instead. Clean training data is required by this algorithm to initialise the reference event probabilities. In addition to the results obtained from extensive computer simulations, an architecture for field-programmable gate array (FPGA) based hardware implementations of the KLD based algorithm is provided. Results showing the performance of the algorithms against real test signals captured over the air are also presented. Both sets of algorithms are simple, effective and have low computational complexity – implying that real-time implementations on platforms with limited processing power and energy are feasible. This is an important quality since location based services are expected to be an integral part of next generation cognitive radio handsets.

No description available.

The thesis will be established as digital Inverter with analog power board and DSP kernel. We can accomplish effective ac motor control with VVVF mode by powerful arithmetic ability of DSP. Furthermore, we can obtain rotor speed by calculating the feedback voltage and current of motor from sensors. We adopt the new integrator scheme to replace traditional pure integrator to solve the dc drift and initial value problems. Meanwhile, we can compensate the voltage distortion caused by dead time to decrease current ripple via judging the direction of current. Because we have modulized our circuits, it is very convenient that we can achieve modern control theories by software modification only.

Positioning systems for trains are traditionally based on track-side infrastructure, implying costs for both installation and maintenance. A reliable on-board system would therefore be attractive. Sufficient reliability for on-board systems is likely going to require a multi-sensor solution. This thesis investigates how measurements from bogie-mounted inertial and magnetic sensors can contribute to such a system. The first part introduces and compares two different methods for estimating the speed. The first one estimates the fundamental frequency of the variations in the magnetic field, and the second one analyses the mechanical vibrations using the accelerometer and gyro, where one mode is due to the wheel irregularities. The second part introduces and evaluates a method for train localization using magnetic signatures. The method is evaluated both as a solution for localization along a given track and at switchways. Overall, the results in both parts show that bogie-mounted inertial and magnetic sensors provide accurate estimates of both speed (within 0.5 m/s typically) and location (3-5 m accuracy typically).

No description available.

Induction motors (IM) find widespread use in modern industry and for this reason they have been subject to a significant amount of research interest in recent times. One particular aspect of this research is the fault detection and diagnosis (FDD) of induction motors for use in a condition based maintenance (CBM) strategy; by effectively tracking the condition of the motor, maintenance action need only be carried out when necessary. This type of maintenance strategy minimises maintenance costs and unplanned downtime. The benefits of an effective FDD for IM is clear and there have been numerous studies in this area but few which consider the problem in a practical sense with the aim of developing a single system that can be used to monitor motor condition under a range of different conditions, with different motor specifications and loads. This thesis aims to address some of these problems by developing a general FDD system for induction motor. The solution of this problem involved the development and testing of a new approach; the adaptive mixed-residual approach (AMRA). The main aim of the AMRA system is to avoid the vast majority of unplanned failures of the machine and therefore as opposed to tackling a single induction motor fault, the system is developed to detect all four of the most statistically prevalent induction motor fault types; rotor fault, stator fault, air-gap fault and bearing fault. The mixed-residual fault detection algorithm is used to detect these fault types which includes a combination of spectral and model-based techniques coupled with particle swarm optimisation (PSO) for automatic identification of motor parameters. The AMRA residuals are analysed by a fuzzy-logic classifier and the system requires only current and voltage inputs to operate. Validation results indicate that the system performs well under a range of load torques and different coupling methods proving it to have significant potential for use in industrial applications.