The aim of the Diploma thesis is to consider an influence of soil management (rotation of crops on arable land and grassland) to quantity and quality of humic substances. These properties are depended not only upon way of soil management, but also upon climatic effects, such are rainfall, temperature, elevation above sea-level, level of underground water and content of clay. Significantly influenced factors are content and form of organic carbon which is very tightly bonded to humic substances. In this work the humic acids content and properties progression was studied in given time period. Also the effect of crop rotations to changes of physical and chemical properties of humic acids in soil environment was observed. Diploma thesis was realized in co-operation with Mendel University in Brno, which supplied elaborating samples. Studied soil samples were taken from humus horizon Cambisol modal Vatín during years 1999–2006, always in autumn. Individual samples were characterized by available analytical methods, which are generally used in humic substances research area. They are especially fluorescence spectrometry, UV-VIS and infrared spectrometry and acid-base and conductometric titrations.

Multielement analysis of flue gas residues from secondary lead smelting was tested using seven decomposition methods on four different flue gas residues and certified reference materials (CRM) CPB-2 (Pb concentrate, CCRMP). The studied samples contained both silicates and also high contents of phases with Pb, primarily Pb chlorides and sulphates. Solutions prepared by various decomposition methods were analysed using ICP OES (Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sb, Se, Si, Sn, Sr, Ti, Tl, V, Zn). Greater yields were found for most of the elements by combined decomposition (with fusion) and decomposition by sintering. Nonetheless, both methods exhibited major losses of volatile elements (As, Bi, Sb, Tl). Thus, one of these methods must always be combined with a method of decomposition in a closed system. The work also demonstrates that, for investigation of untraditional waste geological materials (e.g. flue residues from high- temperature industrial processes), it will be necessary in the future to produce new certified reference materials with anomalous chemical and mineralogical compositions, which are not currently available on the market. Laboratory extraction tests were performed on two different types of flue residues - kinetic (30 days) with ratio L/S...

This Master thesis is a part of a project: Hydride atomizers for atomic absorption and atomic fluorescence spectrometry - new horizons (GA ČR, P206/17-04329S, principal investigator: prof. RNDr. Jiří Dědina, CSc. DSc.) of which the general target is to make a leap towards the ideal hydride atomizer by optimization of atomization based on the knowledge of the distribution of free atoms and hydrogen radicals inside the atomizers. This thesis contributes to the project by optimizing the atomization parameters for atomic absorption spectrometry with hydride generation. The atomization parameters were optimized for three different types of atomizers - multiatomizer, diffusion flame and "flame-in-gas-shield" atomizer using three different analytes - bismuth, lead and tin. Optimal atomization parameters were found for each of the atomizer and each of the analyte - carrier gas flow and flow of other gases if needed for the analysis. Calibration curves and analytical figures of merit such as sensitivity, LOD and LOQ were estimated. Final comparison is based on the data obtained from calibration curves. MDF and FIGS atomizers are mostly used with AFS detection and they provide lower sensitivity and higher detection limits with AAS detection in comparison with MMQTA. Since the analytes are known to trap...

The presented thesis is focused on a spectroscopic study of unstable radicals, ions and molecules in a positive column glow discharge and laser plasma. The research of these fragments is supplemented by a study of biomolecules formation from these species and influence of catalysts. Molecular dynamics of radicals, ions and unstable molecules has been studied using a time resolved Fourier transform infrared spectroscopy. Time resolved spectra of CH4, HCONH2, BrCN, CH3CN, CF3Br, (CF3)2CHBr positive column glow discharges have been measured and simulated using a kinetic model including molecular dynamics, collisions and chemical and radiation transfer processes. The model has been compared with our experimental results and time resolved spectra were described in details. Fit to a complex reaction mechanism has been used to estimate a rate constant of a HCN conversion to HNC by a collision with H radical. The study of precursors of biomolecules was focused on chemical consequences of a laser induced dielectric breakdown in formamide vapor and gaseous carbon monooxide with 18 O labeled water. Dissociation products have been detected using the Fourier transform absorption spectroscopy. The experimental results have been explained by a help of a chemical laser spark dynamics model. Additionally, our the...

This diploma thesis is focused on the study of structure and physicochemical properties of organic fractions of humic substances, which were obtained by the method of thin-layer chromatography. Humic substances, which were used in this study, were isolated from a sample of Slovak alginite based on the procedure of the International Humic Substances Society (IHSS). The following analytical techniques were selected for the characterization of isolated humic substances: thermogravimetric and elemental analysis, molecular absorption spectroscopy (UV/Vis), Fourier transform infrared spectroscopy (FTIR) and steady-state fluorescence spectroscopy. Each organic fraction of humic substances were characterized by molecular absorption spectroscopy (UV/Vis) and steady-state fluorescence spectroscopy. Using steady-state fluorescence spectroscopy, humic substances were found to be composed of fluorophores of humic and non-humic (protein) character. Organic fractions corresponding to the humic fluorophores were characterized by a higher content of oxygen substituents on the aromatic nukleus, a higher degree of aromaticity and also a higher molecular weight. The aim of this diploma thesis was to design and optimize the process of organic matter fractionation for the purpose of detailed understanding of the structure and properties of humic substances, which were isolated from the sedimentary rock alginite. Based on this, the practical applicability of the thin layer chromatography method to significantly reduce the molecular heterogenity of the studied humic substances was evaluated.

The aim of the diploma thesis was the diagnostics of plasma generated in the atmosphere simulating conditions on Mars. This diploma thesis is focused on the simulation of Mars’ atmosphere at atmospheric pressure and normal laboratory temperature. Due to the similar conditions of Mars' atmosphere with Earth, this planet has been explored in the past as well as up to now. Mars' atmosphere is composed mostly of carbon dioxide, which makes up more than 90 % of Mars' atmosphere. A glow discharge generated in a special reactor at atmospheric pressure at a flow of pure CO2 was used to simulate the atmosphere of Mars. Part of the measurement was performed only in pure CO2 with changing current of 20, 25, 30, 35 and 40 mA. Part of the measurements was focused on the study of the effect of the addition of various gases, such as nitrogen, hydrogen and methane, at changes in their flow rates of 1, 2, 3, 4 and 5 sccm. The products formed in the special reactor were analysed using a mass spectrometer with proton ionization and with a flight time analyser. Optical emission spectrometry was used for plasma diagnostics and composition. Mainly simple aliphatic hydrocarbons, alcohols, aldehydes, and ketones were detected. With increasing flow rates of the individual gases, more complex aromatic compounds with higher molecular weights were formed. Corresponding mass and optical emission spectra were measured simultaneously.

Preliminary results of research focused on the applications of DC diaphragm discharge in water solutions containing humic substances are presented in this diploma thesis. Electrical discharges in water produce various reactive species such as radicals (•OH, •O, •H), ions and molecules (H2O2, O3). These species have high oxidation potential and thus they easily react with order species and molecules. Such reactions could lead, for example, to destruction of organic pollutants dissolved in water. This work studies this effect on humic matters that can be contained in water coming from floods. Diaphragm discharge investigated by this work was created in the reactor using konstant DC high voltage up to 2 kV that gave the total input power from 100 to 200 W. Breakdown and discharge ignition started in the pin-hole in the dielectric barrier separating two electrode spaces (anode and cathode space). Presented work investigates decomposition of humic substances by the electric discharge in the dependence of solution properties and discharge conditions. Parameters such as initial solution conductivity, electrolyte kind or input power have been investigated. Moreover, substantial effect of pH on humic acid decomposition has been observed. Refraktometry and absorption spectroscopy in UV-VIS region together with fluorescence spectroscopy has been used for the detection of changes in humic solutions.

This thesis is focused on analysis of reduction of ammonium perrhenate using less frequent reducing agents. Ascorbic acid and acetylhydrazine were chosen as less common reducing agents. Reductions were observed leveraging capillary zone electrophoresis and UV/Vis spectroscopy. Measurements were carried out both in acidic and in basic environments. Reduction of peak area of ammonium perrhenate was observed using capillary zone electrophoresis after addition of reducing agent. Rate of absorption of ammonium perrhenate was monitored with UV/Vis spectroscopy. Furthermore, the possibility of shifting the equilibrium of the reaction to the benefit of the reduction products was monitored by the addition of the complexing agent. Py- rogallol (benzene-1,2,3-triol) was used as the ligand and acetylhydrazine was selected as the reducing agent. The reduction was monitored by capillary zone electrophoresis. The identity of the resulting complex was confirmed with ESI/MS. Keywords rhenium, rhenium complexes, ascorbic acid, acetylhydrazine, capillary zone electrophore- sis, UV/Vis spectroscopy, mass spectrometry

This thesis deals with the development of a method suitable for determination Te(IV) by UV-photochemical generation of volatile compounds (UV-PVG) in liquid samples. Atomic absorption spectrometry (AAS) and atomic fluorescent spectrometry (AFS) were used as detection methods. The basis of the apparatus for UV-PVG was a mercury lamp wrapped by PTFE capillary. Firstly, the experimental parameters were optimized for both methods. The optimized parameters were the type, concentration, pH and flow rate of the reaction medium, the length of the PTFE reaction coil, carrier gas flow rate (argon), supportive gas flow rate (hydrogen) and atomization temperature. The figures of merit with both detection methods were determined and compared after the method was optimized. Detection limits achieved for these two detection methods were 6,0 µg dm-3 for AFS and 1,50 µg dm-3 for AAS. Performed interference study confirmed a significant effect of many cations of transition metals and hydride forming elements on tellurium determination. The influence of nitric acid in the sample was studied separately. The suitability of the method for tellurium determination was confirmed by using a spiked certified reference material.

The master thesis deals with comparison of atomic fluorescence spektrometry and high resolution continuum source atomic absorption spektrometry for three methods generation of volatile compounds Antimony. In both methods of atomic antimony detection, it compares the most common chemical generation of volatile compounds (hydrides) with two alternative methods - electrochemical and UV - photochemical. The values of performance parameters for the determination of Sb(III) and Sb(V) were determined for all the above combinations. In the case of chemical generation, a surprisingly almost four times higher limit of detection of Sb(III) was found in connection with AFS detection than AAS detection. The final part was devoted to UV - photochemical vapor generation, with AAS detection for Sb(III) reaching limit of detection 4,96 ppb, for Sb(V) 8,63 ppb. Although UV - photochemical generation of volatile antimony compounds did not reach such performance parameters as chemical or electrochemical generation, it was observed that the sensitivity of antimony determination increased greatly when introducing oxygen into the apparatus. The interference study also found a significant positive effect of Fe(II) on the generation efficiency, and this modification partially persisted without further introduction of these...