This thesis deals with the modification of the interchange of motorway D1 in Brno – east (km 203). It’s aim to design an optimal solution for omnidirectional connection on the road I/50. Currently it has the shape of a letter Y which allows only a two-way ride. Further, the aim is to propose the connection of the road II/430 to the road junctions. Part of this thesis is proposal to extend the motorway to a six-lane in the place of interchange due to capacity utilization. For this thesis was chosen one from four concepts of the junction within the scope of the study. The work is complemented by a tradic survey on the current arrangement which was carried out using statistical radars.

Diploma thesis processes project documentation of a pension using for public accomo-dation and catering. Pension consists of 2 objects – restauration, accommodation. A restauration is designed for 66 guests. A part of the object is a flat for a family of four. It is a single-storey building which is basement and has an attic.The object has rectengular shape, saddle roof and the part of the object is a tercce. The second object uses for accommodation and has a capacity of 36 beds. It is a single-storey building with an attic. The object has rectengular shape and saddle roof. A pension is situated in Perknov which is one of the parts of Havlíčkův Brod. It uses for year-round occupancy. It’s a brick building made of ceramic system. The object is located in slightly hilly terrain from north to south.

This diploma thesis deals with the impact of thermal insulation on expenses relateted to the operation of the weekend house. Theoretical part describes options of thermal insulation systems, insulation methodes, describes structural prices and costs. Practical part of this thesis describes heat costs on specific weekend house situated in Karlovy Vary region. Thermal insulations are designed in three different variants. Calculation of costs of every designed insulation systém is included in this thesis. In next part of thesis is calculated return of investment for every designed solution. In conclusion of the diploma thesis are compared impacts of thermal insulation on expenses ralated to the operation of the weekend house.

The thesis deals with real rights written to the cadastre. It is divided into ten chapters and starts with the definition of real rights and its historical development. Then, it disusses the cadastre as a public list. The thesis also deals with situations, where there is discordance between the real legal relationship and what is registred in the cadastre. The following chapters are devoted to the property rights including their mofications, the right of contruction, trust funds, the easement and lien. The thesis also discusses the cases when the property is used by another person and secondary agreements in the contract. It also contains simple plat maps concerning certain institutes mentioned in this thesis.

The thesis deals with the history and the interpretation of the development of sacral architecture during the first half of the twentieth century. It interprets the topic in a broad framework, which mentions the historical preconditions of this development and in the most important cases also its international relations. The introductional chapters list all up-to-date publications to the topic and suggest certain means of interpretation of sacral architecture which reflects the natural division of this topic between the disciplines of architectural theory and religion science. The own thesis begins with characteristics of social and religious situation in the Austria-Hungary and its consequences of sacral architectural development. It mentions basic examples of sacral buildings and the measure of their relation to the contemporary architectural development in general. Subsequently it mentions transformational influence of World War I and of declaration of souverain Czechoslovakia, which led to the emergence of new churches with their own architectural ambitions and also to the focus shifting of discipline to new contemporary topics. It follows the parallels with contemporary architectural trends of 1920's and the level of their use in the specific field of religious buildings also in relation to individual churches with their different architectural developments. Further it mentions sacral building development in 1930's with the emphasis in relation to the contemporary social atmosphere and in accent transformation between conservative and progressive religious approach. Than it follows with a review of religious culture transformation during World War II in Protectorate Czech Moravia and shows particularity of unnumerous examples of church buildings and projects from this era. The final part than reflects the evolution of the social role of religion after the War as well as an influence of communist coup in 1948 at potential of sacral architecture. It states the negative influence of both totalitarian regimes on the quality of sacral buildings of following period and on a poor measure of disciplines theoretical knowledge, which among others results in unsufficient primary sources, from which this thesis would likely have taken. Even when this thesis have not and cannot have an ambition of full exploration of the topic, it presents the factography and collecion of interpretations, by means of which the significant gap in the historiography of 20th century Czech sacral architecture can be at least partially bridged.

The aim of my thesis is the Construction technological project of nursery school building. The work involves technical report building equipment, technological instruction for selected activities, inspection and test plans, design of mechanical assemblies, transport links, schedule of health and safety, as well as environmental protection, itemized project budget, timetable and building maintenance instructions

This master’s thesis deals with problems associated with the design of LV distribution networks. In the theoretical part there are described, legislative requirements for the designer of distribution networks, overwiev of standards in which the designer should have oriented and programs used in practice to create design documentation. In the next part there are given requirements for the detail design documentation. Practical part of master’s thesis is devoted to design of reconstruction of distribution network in the given part of village. Appraisal of existing a newly design distribution network was done by calculating of stady state in the BIZON program. In the last part there is listed design documentation for construction in range for the smooth implementation of the project.

This diploma thesis is focused on the analysis of leasing liabilities under standard IAS 17 and the new standard IFRS 16 Leases at Atlas Copco Services, s. r. o. The thesis is divided into three parts. The first part deals with the theoretical basis of both standards. In the second part we will find the practical application of the lease accounting in the monitored company under the new IFRS 16 and its comparison with IAS 17. The third part summarizes both standards and recommends the selection of one of the standards.

The focus of this thesis is to deal with reverse engineering of high-rise building settlements. This is modeled via the finite element method performed in the Plaxis 3D program. In the first part of this thesis, a calibration of input parameters of an appropriate material model – Hardening soil – is conducted. This calibration is a result of oedometric test data which were obtained within a geotechnical survey. An influence of soils over consolidation affecting calibration and the material model choice is described. Final values of reference stiffness parameters are used in a mathematical model of the focused area. This model is created for one half of the high-rise building plan, including vestibule. The high-rise building is founded in a foundation pit. The foundations of this building consist of raft foundation and piles of jet grouting. In the model, there are also changes in pore pressure during an excavation of foundation pit included. The functional model is used for parametric analyses, namely examining cases of object´s foundations and the possible influence of foundation pit´s symmetry on the object´s settlement. All the calculated processes in the object´s settlements are then compared to data obtained from geotechnical monitoring of the structure.

The thesis deals with the issue of protection of Prague's main train station as a soft target and it's regular operation, mainly by using evacuation model with emphasis on barrier-free issues. Mapping of the building was conducted by using Decree No. 398/2009 Coll. general technical requirements ensuring the barrier-free usage of buildings and their parts. Adapting the environment to people with reduced mobility is not always axiomatic, especially in terms of evacuation. For the movement of these persons it is necessary to take into account their needs and possibilities in normal traffic and during evacuation. The sociological and psychological aspects of crowd and individuals have also significant impact on evacuation. For identifying critical points of the main train station, it has been used knowledge of local research, knowledge of barrier-free buildings, sociology and psychology, and special simulation tools for modeling the movement of people. It has been found that space can be optimized by detailed analysis of simulation outputs to meet all expected requirements without negative impact on barrier-free domain. Thanks to this, it was possible to achieve a new design, which accomplishes higher safety of people with movement and orientation disabilities, especially during emergency situations in building of main train station Prague.