The thesis deal with structural design of steel footbridge for pedestrians and cyclist over the Bečva river in Černotín village. Span of the footbridge is 50 m. The basic material is steel S355 and S460. At the beginning were created two variants. First one is an arched footbridge and the second one is cable stayed footbridge. After evaluation variants was selected the cable stayed footbridge. The selected variant was assessed in detail including joints and bearings. Structure is designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.17.01 of Dlubal company.

This diploma thesis solves with the design and static assessment of a multipurpose center in Hodonín. The structure is divided into three statically separated parts. The two structural units, consisting of steel frames with composite reinforced concrete slabs, are symmetrical and the middle part, formed by wooden frames made of glued laminated timber. The construction was solved using a computational 3D model. The model was created in the program RFEM 5.21.01. Using the model, the internal forces and dimensions of the usual elements were calculated. The construction was assessed in the program RFEM 5.21.01 and in MS Excel 2010. The outermost buildings have 7 floors and are designed for residential and office space. The maximum height of the structure is 27.60 m, including the attic. The central multifunctional hall is roofed by a walkable green roof. The maximum height of the middle part is 12.50 m. The largest floor plan dimensions of the building are 49,050 m x 24,000 m.

The theme of the master’s thesis is to design steel structures sports hall. The proposal is developed in three variants according to ČSN EN. The work addresses the static effect of the steel structure and design of parts and materials design. Plan dimensions are 60x38m, max. internal height is 9,3m. The structure is designed for ultimate limit states and serviceability. The supporting structure is designed as roof arches surround an elliptical girder. In both gable walls are designed steel columns. The work also details and solution design. Sports hall was solved in Scia Engineer 2011 and includes a drawing documentation.

The design and the static estimation of the load-bearing steel structure of tribune roofing of the football stadium are the subject of this thesis. The football stadium is located in Brno. The main bearing system consists of 16 radially arranged truss girders with the console lining of 39,9 m. Column “trees” always support a pair of truss girders. The plan dimensions of the structure are 63,2 m x 155,0 m. The roof height above the ground level is 52,0 m. There were two variant of analysis elaborated. The design is made in accordance with the valid ČSN EN standards.

The subject of this Master’s thesis was recalculation and design two variants of existing supporting steel structure storey administrative building which is located in the complex of Jihomoravská plynárenská a.s. in the city center of Brno. Dimensions and disposition based on the specifications of the Master‘s thesis. The total height of the structure is 29.46 m and circular platform has a diameter of 16.088 m. The supporting structure of an existing building consists of circumferential lattice structure. The main supporting elements of both variants are columns. Option A has 8 columns. Option B has 16 columns. These two variants were preliminarily designed and statically evaluated. After that was made a comparison of variants, and one was selected for more detailed processing (Option A). This included the calculation of anchorage, draft of mounting joints, technical report and drawing documentation.

Master's thesis addresses the design and assessment of the load bearing structure of the shopping gallery. The building is designed as a three-storey rectangular plan with a flat roof. The structure is composed of steel frames and composite steel and concrete slabs. There are proposed two possible solutions - variant with a flat roof and direct central gallery, a reinforced rigid steel frames and a variant with a cupola roofed circular inner atrium, solidified with rods.

The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.

The master's thesis deals with a project of the steel structure of a residential building. The building is thought like sevenfloor balcony-access house. The access balcony is situated in atrium in the middle of the building, which is roofed with a shell dome. The regular hexagon creates a ground plan of each floor. Every floor is turned 30 degrees compared to the next floors. The longest cross dimension is 43 m (axial). The height of the building is 30,4 m (including copula envelope). The final structure is chosen on the basis of optimization of the structural variants. The climatic load angle structure falls into the locality of the town Brno. The vertical supporting structure is made from steel-concrete accoupled circular section columns. The floor structure is designed from the steel rolled section I and H. These support assembly of a horizontal structure. Some joists and girder are designed like accoupled with a concrete floor slab. The copula above atrium is made from glue laminated timber ribs. Infill rods are from steel tube. The top ring of copula is designed from the rolled section UPE.

The purpose of this dissertation is to take into consideration the design and the steel structure assessment of the hangar for small propeller aircraft type Cessna. The platform dimensions are 40,0 by 60,0 metres. Headroom is around 10,0 metres. The object’s location is in Brno. The main structural material is steel S355J2. There are two initial geometric alternatives, in other words structural modifications of desired solution. These are spatial truss arc tie beam and garland tie beam. The two alternatives were tentatively designed according to their dimensions and the main supporting elements of both alternatives were also assessed and considered. The alternatives were finally evaluated and one option was selected for detailed processing. In turn of the chosen option, there had been drawing of detailed analysis of the main load bearing parts of the construction with joints and some other details included. Furthermore there is drawing documentation and supervisor’s technical report attached. The valid standards CSN EN were used in processing of this dissertation.

Main goal of the diploma thesis was to create an architectural study of the Ponava Centre, Brno, Královo Pole. This compound includes the set of buildings, which together set up valuable public space filled with different functions (cultural centre, gallery, restaurant, café, music club, housing, leasable units, family centre and roofed public space). The thesis was preceded by elaboration on the urban concept which defined the problems of this compound and determined the placement of proposed objects. The area is located in city of Brno, in Královo Pole district, cadastral of Ponava local authority, between the streets Střední and Staňkova.