The topic of this diploma thesis is design of new production hall in the cadastral area of city Hrusinec. The building is located in an existing industrial area. The building consists of two adjacent structures. The higher of them is single-story production hall and the lower is three-story high office building. In horizontal plane the buildings have rectangular shape. Hall part is designed as a steel structure on foundation blocks. Roof is supported by truss girders. Office building is designed as a monolithic reinforced concrete skeleton also on foundation blocks. The flat roof of the office building is a single-layer with typical composition. Functionally, the building is designed as a single unit. The total employee capacity is approximately 54 workers.

The content of the diploma thesis is design and assessment of railway station steel structure. It is a two-nave building with a length of 198m. The bigger nave span is 40m and it is 14m high. The smaller nave is 11m high and its span is 25m. The total width of the structure is 65 meters. The main construction material is S355JR steel. The supporting structure of the hall is formed by a curved planar trusses with axial distance of 6 meters. The transverse direction also consists of column that bears two main trusses. The static analysis of the main bearing parts of the structure, including joints and details is processed. The calculation were made in accordance with the Czech technical norms CSN EN.

Main concern of the thesis is a structural design of main load bearing elements of steel, four-storey high administration building. Designed building has 36 m long and 24 m wide rectangular footprint. Roof is shaped into a hyperbolic paraboloid surface. Main load bearing structure is consisting of six main cross sections formed by truss columns, and generally curved roof truss beams, accompanied by storey supporting frames with composite slabs. Overall shape of the roof is defined by warped surface. Cladding of the building is consisting of aluminium facade system.

This diploma thesis contains a study of current composite structure of footbridge and in part II design and assessment of steel structure of footbridge for pedestrians and cyclists placed on current footbridge location. Current footbridge is located on "nábřeží Dukelských hrdinů" in Rožnov pod Radhoštěm. In part I, assessment of the current composite structure of footbridge is done, using ČSN and ČSN EN standards for adjusted static behavior of the structure. Comparison of both assessments is made and also with an original assessment from 1988. In part II, design and assessment of steel structure of footbridge placed on currents footbridge location described in part I is done.The structure was designed as two vierendeels trusses connected with cross beams, supporting concrete bridge deck. 9 variants were examined, differing with truss height and the number of verticals. Detailed design and assessment for parts of the structure is done for the chosen variant.

This diploma thesis deals with construction and technological preperation of administrative, commercial and residential complex in Prague – Quadrio. The object consists of 6 seperate buildings connected to each other. There is combined underground under buildings, consists of four basements. The first and second underground, ground floor and the first floor are used for shopping mall. On the other floors, there are offices. The D-object is residential. In combined underground is a subway exit and its technology. There are also parking places for cars, supplying and technical facilities of the building. The construction and technological preperation consists of technical report, technological instruction, resolution of the building organization, time binding, occupational healthy and safety etc.

The content of diploma thesis is designing, project development and static estimation of the supporting steel structure in two different variants of the atypical office building (business center). The object is located in densely built-up location in the Brno. The building is designed as a seven storey. The entrances to the above ground floors are designed from balconies, which are roofed and situated on the edge of the object. The footprint dimensions are 57,6 x 57,6 m. Variants are compared based on weight and size of the coating surfaces supporting construction of the object. Drawing documentation, static calculation of joints and details of the construction are processed for the best variant.

This diploma thesis describes the design and assessment of steel structural design of the steel aggregate bins including roofing. The construction has a ground plan of about 33 x 9 m and it is divided into 8 cells bins. Main material is steel, grade S355 and S235. There is developed a static analysis of the main load-bearing parts of the structure, including joints and selected details.

Diploma thesis deals with the design and assessment of the load bearing structure of a multi-storey building, proposed by the combination of two materials, steel and glued laminated timber. The building has a V-shape, the angle between legs is 120 °. Floor plan dimensions of one arm of the building are approximately 40x20m, building height is 24.3 meters. The building is designed with a flat green roof. The load bearing structure is solved as a heavy frame, lower three floors are made of steel and serves as the business premises, top four floors are residential, and their structure is designed of the glued laminated timber. Bracing of the whole structure is solved by a system of crossed steel rods.

The theme of this thesis is the design and assessment of the supporting structure of a footbridge over the river Svratka in Brno. Span bridge is 40 meters and width of 4.2 meters. The bridge is located in the administrative area Brno - Bystrc.

The subject of my diploma thesis is to design timber and steel variants of riding hall. For static assessment was chosen timber. The hall is a one nave building. The dimensions of ground plans is 35,0 m x 75,0 m and the hall is 11.70 meters high. The load-bearing was formed by a curved glue laminated timber trusses. The building is located in Český Těšín, climate loads are designed for the area. The calculation were made in accordance with the Czech technical norms ČSN EN.